Question of Stor.E Canvio 3.5 2 TB

Similar Questions

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• How to move data from iMac to 3 TB Stor.E Canvio external HARD drive

  Hi guys,.

  First post, new to all this.

  I bought a Toshiba 3 to Stor.E Canvio external hard drive to get a load of movies and music out of my iMac.

  I plugged it in, the iMac seems to recognize, so I tried to drag and drop in the folder on the hard drive, but it leaves nothing.

  Can someone give me some advice on how to move things from my iMac to the new hard disk?

  Thank you very much, looking forward to hear from you.

  Hello

  As far as I know the HARD and the NTFS file format disc media.
  If you want to use it in Mac, you must re-formatted the system filesystem HFS + for Mac compatibility.

• Toshiba Stor.e Canvio on MacBook Pro

  Hello

  I bought a Toshiba Stor.e Canvio 1 TB external hard drive and I have problems when I connect it on MacBook Pro.
  I formatted for Mac OS (with the registry) and works well with the iMac and Mac Pro, but nothing to do on Macbooks...
  Searching the Internet I found that this problem is impossible due to a hardware problem which can be solved using a USB hub and I tried but does not work...

  I don't know what else I can do if you know something about this problem, I will be appreciated...

  Thanks in advance.

  Hello

  I assume you mean on this external HARD drive
  http://www.Toshiba-multimedia.com/EU/store-external-hard-drives/Canvio/

  This HARD drive needs 900mA current and this means that you can use a USB 3.0 port or 2 USB 2.0 ports.
  The point is that a USB 3.0 port provide 900mA and USB 2.0 port provides 500mA
  So if you Mac provides only the 500mA to each USB slot, then you connect the 2 ports USB 2.0 HARD drive, in this case, you can use a usb cable to Y.

• Unable to partition Toshiba Stor.E Canvio

  Hi all

  Just bought a Stor.e Canvio hardrive 3 TB desktop.

  I use a Mac app, have formatted for Mac OS extended (journaled). I want to put 4 partitions on the disk as its to use for the backup.

  However, when I try to partition through disk utility, it gives the following error

  Partition failed with the error:

  Invalid query.

  Ideas please

  Thanks for your comments!

• Toshiba Store.e Canvio 1 TB appearing is not on Macbook

  Hello

  I have a problem with my external hard shore, it is a Toshiba Store.e Canvio 1 TB, HDTC610EW3B1.
  It works fine on my old Macbook running the Mavericks but now on my new Macbook Pro retina running on Yosemite, it will not appear anywhere.
  I checked with disk utility, and it does not, also not appearing is not on the USB in system preferences.

  Any ideas on what is happening here, please?

  Thanks in advance for your help.

  You can test it with the Windows machine? There is everything OK?

• Questions about Stor.e TV +.

  Does anyone have a contact point to raise a complaint about the lack of service from Toshiba? I spent £160 on a TV + Stor.e and did have some problems with it, as you can see from the few posts that I raised. After spending £160 on a point I don't understand why if the forum is the only option to support what he is no Toshiba engineers on this issue, who are able to answer my questions. I do not expect a 24 / 7 hotline for £160 I spent, but it would be good to know that a Toshiba engineer could answer my questions about their products. Especially since it's the second one I had which suffers from a cosmetic defect, I had to stick to feet about it as the Unit came with 4 pads ride around the box. I also have my doubts about the HDMI because it seems to be very sensitive to any movement in the area, causing the connection to remove.

  I got a Western Digital box media for more than five years and had no problem with this, the only reason why I changed, it was to make use of the connection to the local network, the HDMI connection and the fact it supported more than file formats. FSR this device was abit of a disappointment for me. So if someone could point me in the right direction, I would be very grateful.

  Hello

  I can understand that you are not happy with the current situation and usually if you buy a product it should properly expect and do no problem.

  As you probably already seen here it s a user to only user forum. This means that you can speak with normal people like you and me and there is no official support from Toshiba.

  In your case, it would be best if you contact an authorized service provider or call the Toshiba UK. The phone number, you can find on the site of Toshiba UK Web:
  http://UK.computers.Toshiba-Europe.com

  Just give the guy a call and explain your situation. I'm sure they can give you a detailed answer and if your TV Stor.e + must be repaired or not. When warranty hardware repair is free.

  I hope I could help you a little bit :)

• A few questions about Stor.E TV +.

  Hello

  bought the gadget yesterday (to be used as a media server on my network).

  Then I came across some problems:

  -There are no connected TV and using the remote control of the installation, the device is a little difficult. The only web interface is an example of cgi script to calculate two numbers :-). Are there any plans to improve the web interface?

  -The main hard drive is (HARD drive SYSTEM, no file structure), but when I try to copy the audio files using the remote it says copy... forever, but does nothing. This behavior is known?

  -Very often the device seems to be stuck (no reaction to the actions of the remote control)...

  I don't know how to read the current version of the firmware, but I guess I have a very old version of it. Y at - it a update available (I searched the Toshiba site, but have not found a)?

  Best regards

  schwarzes_krikri

  Hello

  as far as I know, there is no intent to enhance the web interface.
  I think that Toshiba will only enhance something, if there are problems.
  For navigation, the internal display, store TV + is ok, but for the configuration you must connect it to a TV.

  Regarding the "no response to the actions of the remote control", perhaps the StorE TV + is only a bit slower, but it shows a reaction.
  Use the right arrow key to go into subfolders. If this makes no difference, on the StorE TV + default settings.
  Go to the menu, choose 'Configuration' - 'system' - "Restore Default".
  After that the copy of the files audio-question should be resolved, also.

  To view the firmware version, go to the menu and choose 'Configuration' - 'system' - "system update".
  Right you´re. At the present time there is no fw updates.

  hope this helps you
  Best regards

• research question App Store iOS 9.3.4

  Downloaded ios 9.3.4 yesterday - 14-August-2016 - App Store search no longer works.

  @apple support: when it will be fixed? What is the workaround? Thank you

  Hello

  Try it after a while. It will work.

• Some problems and questions about StorE TV

  Hello! I bought stor.e tv a week ago and there are a number of issues, in order of personal importance:

  1. it slows down audio playback. It happens when the standard reading mp.3s on my stereo via the analog output - my music sounds weird, slow and with a reduced frequency. I have to go back change, the exit HDMI (normal speed part, no problem), then change new analog, navigate through folders to find the song I want to play and replay - voila, it works normally. Altogether in a complex way to play a song correctly, you do not?
  2. when there are ID tags (especially album covers) to the songs it takes forever to go from one song to the next.
  3 audio settings are often forgotten after the device has been stopped normally remote control only - you turn it on again and is not how I left it, but back to HDMI. So, I recall at any time check the settings before playing a song? Even if, in a tortuous path, that ^ s have useful to the problem of the mind 1.
  4. do not display correctly Cyrillic subtitles.
  5 pretty hot.
  There are other things, too (no playlists, not slow, slow to develop, etc.). I'm actually writing than just before you go back to the shop and ask for my money back.

  Bravo, guys!

  Hello

  > 4. Does not display correctly Cyrillic subtitles.
  Yes, has been mentioned in other threads seems that not all the subtitles are supported.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51945

  With regard to other issues.
  I think that you should try to reset the store default TV E again and should check how it works.
  In many cases, it helps to solve these annoying problems.

  Welcome them

• Problem with Stor.E Canvio - TB 3 drive HARD USB 3.0 external

  I bought a 3 TB Canvio HDWC130EW3J1 and used to save a load of files on the partition, with it came.
  Everything is OK. Unplugged the HDD than Win 7 and plugged into another Win 7 and - no partition.

  Win 7 identified as brute of 3 TB.
  I've messed up with her for a bit, abandoned and finally it was exchanged for a new, I assumed it was a defective controller or something.

  The replacement is exactly the same. As soon as the reader is disconnected and reconnected, everything disappeared. I tried this partitioning with a 3 TB GPT partition and a 2 TB MBR, it contains the same.

  I bought a £ 75 door stop. I dare not put anything on the drive, it is useless.
  Behaves the same USB2 and USB3.
  I had a quick glance at various forums and see people complaining about similar problems, but no resolution.

  Anyone have any idea?

  It is a HARD USB 3.0 drive that is also compatible with the USB 2.0 standard.
  I m wondering if the HARD drive could be recognized properly using a Y USB 3.0 cable that allows to connect the HARD drive to two USB ports.

  In addition HARD drive supports the format NTFS file standard and in my opinion it of not necessary to change the format of files.

  Moreover HARD drive supports password encryption and helps secure the data from unauthorized access.
  In case you use this HDD in relation to other laptops, respect this password encryption.

• Stor.E Canvio 2 TB HDD laptop - WLan access using Xbox

  I am looking to buy one of these numbers to play the digital media, currently stored on my laptop on my Xbox one.
  According to the writing on the Web site, the files are accessible wirelessly on the network.

  Can I save data to him on the network too?

  For an optimal user experience I would connect my laptop hard drive and access the multimedia files with the xbox one or the hard drive connected to the xbox one wireless and save wireless on it from my laptop.

  Or the other of these two together would be ups work?

  It is a common external USB 2.5 HDD.
  This means that you can use as a common HARD disk.

  I put t know how your setting up your home wireless network, but generally you can use this disc external HARD as NAS (storage attached to the network).

  You can also configure and add files and directories by using the Windows Media center. This will allow you to access the files on DLNA
  http://Windows.Microsoft.com/en-us/Windows7/add-media-files-to-Windows-Media-Center

  But in general your question should not be tied to this HARD drive but it s is the home network configuration.

• Store.E Canvio HDD - Win XP logo test has been placed correctly.

  Try to install this drive but says that he has been testing windows logo for XP compatibility.

  Why?

  Hello

  To my knowledge, this error pops up to avoid errors with Windows hardware and related software that is installed. Mainly the indication that the software or driver or one of the files is not signed for the version of Windows that you are using in your case of Win XP.

  Windows system conduct detection signature each time an INF file is used to install the equipment from a designated device class. You can simply the button continue the installation of the software

  For the future, you can turn off this kind of message.
  1. open system in Control Panel.
  2. on the Hardware tab, click driver signing.
  3. under verification of signatures of file, click on ignore, warn or block
  Click Ignore to allow all device drivers must be installed on this computer, regardless of whether they have a digital signature.

• Question: Can store virtual machines on the same drive as ESXi?

  I'll be downloading the trial soon and construction of a test at home server. I see that the minimum requirements are that 80 GB for ESXi but does that mean that ESXi needs 80 GB to be run in addition to virtual machines?

  I want to just prepare for the way I need to build it. Will be need ESXi on it's own hard drive must be installed, and then the other hard drives for data storage?

  Welcome to the community - the best practice is to seprate the storage that you House your virtual machines are the disk that contains the ESXi software - I don't think the 80 GB will be inlcude nominal VMFS datastore but I would invest in a disk drive inexpensive in order to give you more storage.

  Another suggestion to get tested as painless as possible - to confirm that the hardware you are using is supported - http://www.vmware.com/resources/compatibility/search.php

• Cannot connect and use 2 hard drives Canvio de Store.E at the same time

  Hello

  I have 2 devices Store.e Canvio: 2 TB and 3 TB respectively but it seems that I can't connect/use them at the same time, as if I do it, one of them (the last I connected), becomes inaccessible ("access denied").

  If I disconnect the first device I connected, the other starts to work,

  Is an odd question, and I can not find someone to live something similar...

  No idea how could it be the cause, or how can I solve it?

  Thank you

  I m wondering if the same problem is displayed using another computer or another USB hub with an additional power supply.

  From my point of view of the few this problem could be related to the low power provided by a single USB port.

  The two hard drives seem to support the USB 3.0 standard.
  The USB 2.0 port common provides 500mA and USB 3.0 requires 900mA
  This means that two USB devices connected simultaneously use 1800mA which could be too much for the USB ports for s laptop