Question of stupid graph OBIEE 11 g

Similar Questions

• questions about XY graph

  Hi, I think that a lot of people have already asked this question, but I couldn't find a solution to my problems below.

  1. I would like to draw multiple axes on the same x-axis (time) using XY charts. The reason I use the XY graphs is that I have given (amplitude and timestamp) in a table, so it would make sense to directly draw the berries as it is, rather than using a loop for draw 1 item at a time.
  2. I like to stack several axes just as maps of waveform to XY charts, don't know if it's possible to do?

  Did anyone tried something like this before?

  LV_Enthu wrote:

  Ben wrote:

  One of my favorites

  An array of clusters of berries of clusters.

  

  Ben

  This seems very confused, can you please share a photo of these vi?

  No, but I'll ry to explain. From the end of the expression and working to the left.

  Incubators - a cluster with two values, an X and a Y. The cluster is a point chart.

  Tables of business incubators - the table is one of the plots on the chart.

  Clusters of... - LV don't let you do paintings of paintings (which would be a 2d table) so each piece wraps in a cluster.

  An array of clusters of berries--each table is one of your parcels.

  Ben

• Questions from stupid to Smartphones blackBerry comin at ya

  Just bought a blackberry pearl 8130 and I have a couple of stupid questions, about this.

  1 send SMS, how are you?  It is similar to texting on a dumb phone?  (Since we have "smart" phones)

  2. how you configure speech recognition to the names in the address book?

  Thanks for any help.

  1. open the SMS folder on the home screen or in the Messages folder > Menu > compose SMS.

  2. find the voice dialing icon, open it and follow the prompts.

• Question of collapsible article - OBIEE Win64Bit 11.1.1.6.0

  Hello
  
  I installed OBIEE Win64Bit 11.1.1.6.0 on my Windows 7 64-Bit machine. Then I upgraded my 10 SPR g to 11g using the upgrade wizard.
  
  The performance of any report of the RPD level all sections, by default come as expanded with a sign - next to him. I have to manually reduce all sections. I tried to create new sections, but the same question. I tried IE 9, IE 8, Firefox and Google Chrome 12. Still the same problem.
  
  All the suggestions/help will be very appreciated.
  
  Thank you and best regards,
  Dev

  Re: Minimize the collapsible Section by default

• Why register to ask a question so stupidly difficult?

  A question explicitly.

  Hello greybeard2012, talk us a lot in the forum and, I think, soon we can find a way simpler to do this. Sorry for that. If we can help you something please ask.

  Thank you

• Question of OPatch with OBIEE

  Hi, I am applying the 11.1.1.6.4 recent patches, but I am running with no easy way to get more space. I know that when OPatch is used, it creates backup copies that can be used to restore. I patched this server several times (11.1.1.6.0 to 6.1 to 6.2 6.2 BP1, now at 11.1.1.6.4).
  
  Is there an easy way to delete all the old files (assuming that I don't roll back)? If so, where are they stored?
  
  Thank you!
  Scott

  Hello

  Please see note: how to avoid disk full questions because OPatch backups take large amount of disk space. [550522.1 ID]

  Also be sure to save disk space, you can remove the patch files $ORACLE_HOME/Oracle_BI1 /.

  I hope this helps.

  Thank you
  SVS.

• two questions relating to the OBIEE 11 g Linux installer

  Hello
  
  1. do we need to install JDK 1.6 and above before installing OBIEE? as in below post what OBIEE uses it's own JDK.
  
  OBIEE 11 g on Windows 7 (64-bit)
  
  2 we need configure the DHCP in Linux loopback adapter as well as we do in windows? If yes how to do it in Linux?
  
  
  
  Please let me know the answers as soon as POSSIBLE.
  
  Thank you
  Jay.

  Hi Jay,.

  1. do we need to install JDK 1.6 and above before installing OBIEE?

  Not required

  2 we need configure the DHCP in Linux loopback adapter as well as we do in windows? If yes how to do it in Linux?

  On Linux x 86 operating systems, configure the host to resolve to the IP address of the loopback host names by editing the file/etc/hosts to contain the following entries:

  127.0.0.1 nomhote.nomdomaine hostname
  127.0.0.1 localhost.localdomain localhost

  After that, make sure that the host name resolves to the loopback IP address by typing the following command:

  / bin/ping nomhote.nomdomaine

  Kind regards
  DpKa

• Question of IE9 with obiee 11g

  Hi all
  I made some customizations using narrative view of obiee11G that displays a picture on the Web using HTML5. I can view the report with the image customized using all browsers except Internet Explore. After some research, I found that I need to switch browser view IE9, IE9 compatibility mode in developer tool F12.
  
  Is there a default way to this mode of browser to IE9 instead of modify manually every time that connect us to BI.
  
  Thanks in advance,
  CGI

  Have you tried clicking on tools > browser compatibility settings and see if the site is in the window? If so, delete it so that it uses is no longer the compatibility view.

  Also check this link:

  http://StackOverflow.com/questions/3726357/why-does-IE9-switch-to-compatibility-mode-on-my-website

• Question instr substring in obiee

  Hello
  
  I want to use the INSTR function in OBIEE
  
  Function of POSITION is located in the forum
  
  INSTR, function takes four values:
  INSTR (string1, string2, number, number)
  
  For example the IP address
  111.222.333.444
  
  The goal
  SUBSTR (IP_ADD, 1, INSTR (IP_ADD, '.', 1, 3)-1)
  111.222.333
  
  How should the POSITION function, I use?
  
  Thank you
  MINO

  830583 wrote:
  any other solution?

  It's really simple

  SUBSTRING('111.222.333.444' FROM 1 FOR LOCATE('.','111.222.333.444',-1)-1)
  

• Help... Question of stupid Selection tool

  I don't see the points when you use the Selection tool and can't select parts of objects. I don't know what to do.

  I thought about it myself.  I was in "object drawing" Mode rather than "Drawing Mode of fusion. A simple CTRL + B solved my problem.

  Hope this helps someone who has a similar problem...

• Question re stupid Tables

  Hey everybody. I worked with the web templates so far and although I learned a lot editing them, I noticed that I still do not have a basic understanding of the HTML language. I decided to redesign my Web site from the ground, mainly with the help of the online Adobe Dreamweaver 8 tutorial.
  
  Now, I created the first table on a page, I want to insert another table in a cell of the table with his fist. I did it and it worked fine. However, when I try to insert a picture object by using the same width as the table itself / cell of the original table (760 px), the visual aid seems to recognize a different value of the width of the (larger) table.
  
  Why is this?
  
  I did not use any cell fill, spacing or anything like that.
  
  Any ideas would be greatly appreciated. Thank you.
  

  You say that you did not use cellspacing, cellpadding, etc, but you have.

  You use the default value for them (and it's not zero, either). If
  you want to be zero, tell them to zero!

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "HTML-Newbie" wrote in message
  News:edcoca$KTH$1@forums. Macromedia.com...
  > Thanks for your quick response. Here is the code:
  >

• Questions about the replacement of a power supply for a P7-1235

  I decided to do an update on my Pavilion P7-1235. I put in a graphics card and put in power level. After doing some research on this forum and others I know well enough that I need. The only question I have is about the food. I don't know what the original power supply. There is a vent on the side where it however. So I guess that there is a fan on this side of the power supply. This eating plan I get:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139050 & TPK = % 20500% 20% 20modular %2 watt Corsair...

  I noticed that the fan is on top? Now there is no high ventilation in my P7-1235, I worry for nothing? I think that all the supplys to look the same. What is the top of the fan page for? Or can anyone suggest a replacement perfect for my exact Pavilion model?

  Sorry if the questions are stupid, but I'm still learning and want to do what I can myself!

  Hello

  Yes, you can use the power supply the same way. The image is in a vertical position for the convience of the buyer. I have the same with number of power supplies and it was fine. You can check the following links people have set up exact POWER supply in different ways.

  http://pcpartpicker.com/builds/by_part/Corsair-power-supply-cx500m

  However, please be aware of your power supply size and your case. If you have all materials/components in stock for your computer, then it is what it is;

  ATX case:

  : Height 39.4 (15.55 inches)

  Width: 17.5 cm (6.89 in)

  Depth: 40.9 cm (16,14 inches)

  PSU stock:

  (5.9 x 5.5 x 3.4 inches)

  And the power supply you want;

  Corsair size;

  "5.9"x 3.4"x 6.3"

  As you can see the length of the Corsair is considerably larger than your stock of power supply. This could hampor of air or could even make it so the holes of the PSU and the case does not match. However, this is usually not what worry. The height and width that should be worried because the length rarely causes problems, I wanted to just make sure that you knew in advance.

  Take advantage of your power supply; Corsair is a great brand.

• Multiplot XY graph

  Hello

  I have a few questions about the graph XY. Please see the attached schema.

  Basically, at each iteration, the program will generate a set of X - Y data and I wanted to trace all sets X - Y data within a chart. If I draw the graphic 'XY' function inside the loop for example, it will show only a little bit, but if I put the chart of "X - Y" outside the graph, it will display all the parcels at once at the end is possible he show a plot?

  the second question is I want to show the legend of land as the applied bias, how can I control the legend of the plot? I am using Labview 2010. I right click the X - Y graph, and then click Create--> property node, I do not see a property of legend of the plot.

  Thank you

  Joyce

  property nodes run at towards the bottom. You must set the active plot before you set the caption. See attachment.

• E8350 Questions

  A few questions-

  I wouldn't be able to use an SSID separated for 5g bandwidth? I can't find how to do this in the Linksys connection

  software. I however used a different password, so I guess that if I want to connect a device to the 5g I would use

  This same password if the SSID is the same for both?

  I did something wrong to build this thing? The name of my router is my SSID and password is my password?

  So if I want to access the configuration of the router from 192.168.1.1 browser I type in my SSID and password for

  Enter the settings area?

  I'm sorry if these questions are stupid. I am a total newbie to the networks. Any help would be greatly appreciated.

  Here is a link to the user guide that can help you find all your answers: userguide/MAN_E8350_LNKPG - 00148_RevA00_Intl.pdf

• FB Burrito stupid problem

  Hey guys, I worked on an application on my mac, but recently he has sold and got a windows machine. I have everything back in place, and I don't know the answer to this question is stupid. I use Flash Builder Burrito with the 0.9.1 playbook sdk. To start a project (since I can't import from my mac as a mobile mine) I click on mobile application, uncheck android then only blackberry is checked and click Finish according to this. But when I do that, I find myself with two files .mxml, .as file. What I am doing wrong?

  Hey,.

  the only thing that comes to mind at the moment, is that may choose you the wrong type of project. you are absolutely sure you choose Mobile project Actionscript and don't Flex not Mobile project? Let me know what you find. Good luck!