Question on the copy of VMs

Similar Questions

• Question on the "Copy" option in Adobe Sketch App

  The copy option does not have a copy of my sketch. How can I duplicate a sketch in Adobe sketch?

  Thanks for any help someone can offer me.

  Laura

  Hi, Laura,.

  Here is the method that works for me. When you are at the project level in Sketch 3 (with individual arrays displayed), it is possible to select an individual sketch canvas and reproduce them. At the top right (above), you will see an icon with a rectangle and a pen. Press it and it will change to a check box. You can now press the icon (with three small lines) on a canvas to select. The painting will now be selected. Look up in the menu and you will see rectangles with the + (copy of the icon). Tap it to duplicate the selected canvas. The duplicate will appear in the project post to the original.

  I hope it's useful.

  Best wishes

  Dear

• Big problem in the finder then the copy of the file trought different drivers

  For my work, I download and archive about 100 GB of photos every time.

  After upgrading to Mac OS sierra I meet big difficult.

  1 copy a lot of files require a lot of time more instead of last osx (about 4-5 times more)

  2 - from multiple instances of copy beginning with a lot of delay (approximately 5-6 minutes after the control drag & drop or copy/paste)

  3 - once the completed instance disappear and always with "0 file to the end" for a long time (about half the time of the copy) and in any case until all istances have been terminated

  4 - after all: not all the files are copied (the last time about 300 files are lost in a total of 4000)

  before all the reactions:

  -all my system works perfectly before the sierra of macos

  -all my drivers are fully working (tested in ather Mac without sierra)

  -a speedtest with the blackmagik tool say that the system can still run at full speed

  -If a script third spear the copy no problem

  that: in my experience, the question is on sierra finder.

  clearly, I can't work with this type of system, that:

  When apple will fix problem of che?

  How can I return to osx than el capitan without lost my documents and applications?

  Thank you

  > How can I return to osx el capitan without lost my documents and applications?

  This link is for El Capitan, but it also applies to the Sierra:

  OS X El Capitan: revert to a previous version of OS X

• Question for the geniuses of pictures only.

  Question for the geniuses of pictures only.

  You see, I started with iPhoto and later began to use Aperture.  With iPhoto and Aperture, you can have ALL the metadata below the thumbnails, (nice).  Well, I put all my images descriptions in the keywords section because it didn't really matter, because these programs could show them as thumbnails.

  Now, I use this wonderful program of Photos and I found out that it will ONLY show the title of"the image in the thumbnails.  I've got on 30 000 images with keywords but no title.  I want to move / copy the text in the keywords section in the section of the title. I'm not a computer scientist, I guess that my skills are in average.  But I can follow directions.

  Suggestions appreciated.

  Member of ASC compiled some useful on Photos AppleScripts. Maybe one of them will be sufficiently close to your needs.

  http://www.oldtoadstutorials.NET/no.P01.html

• How to use the copy paste

  I would use the copy/paste feature to copy some text from my file in Word for my web site (as an administrator).
  I faund some information in Firefox, but I wasn't able to follow. I'm not a programmer or a system in English. I'm just an oridinary user.

  As a general rule, you should be able to stick by using one of three methods provided by the browser:

  • CTRL + v
  • the orange Firefox button > edit > paste or classic menu Edition > paste
  • Right click > paste

  However, if the editor has a small button of dough, which can be blocked by security restrictions. I'm not sure it's interesting to try to make these buttons work (as I think you found your question).

• Stor.e USB3.0 external base freezes Portege Z930 during the copy of data

  Dear users,

  It's time I have this problem: I bought the Toshiba Stor.e basic USB3.0 external HD, but I was always unable to use it at full speed.

  During copying of large files (hundreds of MB) the progress bar stops abruptly and the system becomes unstable: I can't stop the copy, or cancelled, or closing the window. I have to physically disconnect the HD so that return system and the file is never copied.

  I followed [this post | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=69634&tstart=0] and installed the drivers intel updated (version 1.0.7.248), but I still feel the same question.

  Anyone have a similar problem and know any solution?

  Thank you very much

  da

  Hello

  To me, it looks like a HARD drive problem and not a question of system.
  It looks like interruptions in stream in the copying process and the system hangs.

  Have you tested if you get the same problems using another HARD drive?

• A few questions about the recovery image installation

  A recovery USB drive created using the Recovery Media Creator contains the Windows operating system and is it the Windows key to reinstall - how it is activated. Is it different for the repair disk.

  Can be used for a new installation of Windows 7 on a new SSD? Is this just a case of connection and the recovery disc running on the new drive to th? How the recovery Partition can be re-created on a new SSD?

  Drop Hello

  I can see user Justinian gave detailed answers, and I hope you understand how it all works now. Of my overwiev aside:

  What exactly is recovery image?
  + Recovery image is an exact copy of a hard drive and contains the exact copy, byte by byte, a hard disk partition. The copy includes all the partition information, sectors priming, the table of allocation of files, installation of operating system and software application different. +
  + You are using installation Recovery CD/DVD/USB, you can restore your system after heavy data loss, caused by an accident of operating system, hardware failure or complete virus attack. +
  + Recovery image installation procedure allows the installation of system and easy to user. Unfortunately, it is not possible to restore only certain files from a disk image. +
  + Each recovery image is designed for a specific model laptop and it cannot be used for any other series of notebook. +

  With other words, recovery image is a software package that contains Windows operating system, all the drivers needed for some portable model, Toshiba tools, utilities, and also some other software. A lot of people don't like these additional software, but no you don't have to use it. all things you don't like you can remove it from the system.

  Activation of recovery image:
  When you buy the phone model you also purchase the license for the preinstalled OS version that you get with your machine. After start and contact to the internet OS will be checked and activation will be valid.

  Please note: you can reinstall original image recovery 100 times if necessary. There is not a kind of limitation, and whenever it will be activated.

  Take care of your recovery media (DVD/USB). Do not lose it.

  Of course, it can happen that you do not find your recovery media. In this case you can order.
  Recovery order - https://backupmedia.toshiba.eu/landing.aspx
  Questions and answers about ordering recovery DVDs - http://aps2.toshiba-tro.de/kb0/TSB0202TA0000R01.htm

  If you have any other questions do not hesitate to ask.

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• Y at - he shortcut keyboard to take a screenshot and at the same time put in the copy/paste buffer

  My question: is it keyboard shortcut to take a screenshot and simultaneously place the content in the copy/paste buffer, rather than a file?

  If not, is there a shortcut miss me.

  My current approach is Cmd-Shift-3 or Cmd + Shift + 4, take the screenshot, open in preview, select all, copy, return to remove Word, paste, the screenshot file, then repeat. There must be a more efficient way to work.

  Thank you

  Mike

  Mac keyboard shortcuts

  To save your screenshot in the Clipboard instead of a file on your desktop, use the command-Shift-Control-4.

• I have questions about the use of Microsoft Windows for computer repair purposes...

  I'm about to start a computer like Geeksquad repair business. If I need to re - install Windows on computers is a specific copy, I need to get Microsoft for use of technician? I want to make sure I'm following all the recommendations of Microsoft.

  Hello

  I suggest you to post your questions in the TechNet Forums for a better answer.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• Stupid question of the Stick wireless about Photos

  I have successfully connected to the device so that it communicates with my Iphone 6. I transferred photos from my Iphone on the joystick (copied) successfully wireless via WIFI.

  My question is, manually delete the photos on my Iphone in order to make room? Or y at - it an option to automatically delete after the /copy transfer operation?

  Also, the transferred files are uncompressed copies and 100% of the Iphone?

  Thanks in advance.

  If you manually transfer the pictures, you need to remove manually your native photo app after the transfer to free up space.

  in the settings there is an option for backup camera. If you use this option the camera will automatically backup whenever the application is started. This option also includes an option to remove images after backup.

  If you choose to delete the images deleted after backup will be in the recently removed from your application folder native photos for 30 days. If you need to free space immediately, you must open the native photo app and manually delete the pictures in the folder recently deleted to free up space.

  the files are exact copies of the jpegs that takes the iOS device. These are not compressed as all JPEG files are compressed. iOS devices (until the iPhone 7) does not in the first.

• MP3 corruption during the copy to USB or playing with MP11

  Bought a cheap good car 16g off ebay.  No brand name.  To use in the car to listen to music (we have a new sienna with USB socket)
   
  Has started moving the MP3s to it, a bunch of files
   
  Found that at a given time, a file will not play with media player.  Therefore, no new file (copied to USB) after bad, would play.  Does any kind of codec error.  If I delete bad and try to copy it, he would not play.
   
  So I format USB and start over.  It happens again, with different files.  I do this a few times
   
  Finally, I find that media player is changing the file to be unplayable.  I tried to open one with media player classic and it works, but then, open the file with the current media player, I get the error, and it's more playable by classic.  After the file fails, the media info, artist, album, ect, is gone, but the name and size remain.  Size looks normal, but the image of the album no longer appears on the file manager.
   
  After testing more far, I see some files do not survive to the copy.  Others survive the copy, but media player is their in.  Error always the same on these files.  I can copy back them and replace, and sometimes they are OK, then other times they need a another copy and replace.  In all cases, the album art has disappeared.
   
  I found that if I delete one of these files, the next time I copy, it seems good, but is damaged if I play with media player.  Media player classic it plays very well and does not alter it.
   
  So, in summary, I'm sure only a few things
   
  Symptoms of a bad file is that it won't play in anything whatsoever, says he needs of codec, and I have more music as album info and others.  Such a file can occur after copying on USB key, or the first time, it is played with the current media player (media player helps says it's common when I ask for update).
   
  Some files do not copy right.  I can copy back them and they're right.  However, sometimes they lack the album image in the file manager.  No correlation with the existence of this image, and if the media player will be trash.
   
  Some of the files when they are played with media player go corrupt and will play is classic.  I have copy and I can play the recopied with media player classic, but try media player and it will be corrupted again.  The original copy of the copied file will play well with media player out of the hard drive, but will go corrupt if played off of USB, however, if copied from the USB to the desktop, it will now play with media player, but the album cover will look smaller than the original hard disk.
   
  Currently, the problem is only with files that are on the USB drive.
   
  A lot of hiking here, but you have an idea of what is going on?
   
  I'm afraid that this media player will decide to begin to destroy ALL my mp3s.  I went Classic Media Player to be the default for MP3 player, but you still wonder what WTF.
   
  Or is it a kind of USB problem?  I did a full and several quick formats of USB.
   
  Any ideas?

  Hidyrwolf,

  It seems that there is a problem with the USB drive as the file copied from the USB to the computer plays very well and the problem occurs with files that reside on the disk.

  To check if the problem caused by the USB, I suggest that you plug the USB on the other computer and check if the problem persists.

  Alternatively, you can add the missing information to the media library of Windows media player.

  Add or edit media information in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-edit-media-information-in-Windows-Media-Player

  Where is my album art?

  http://Windows.Microsoft.com/en-us/Windows-Vista/wheres-my-album-art-fixing-song-titles-artist-names-and-more-in-Windows-Media-Player

   

  You can also try to update the Codecs on the computer and check if the problem persists.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why used my Microsoft Office 2003 Download Download correctly? I have Windows 7 and I bought the copy of the program? __

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Why used my Microsoft Office 2003 Download Download correctly? I have Windows 7 and I bought the copy of the program? you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You post this question in the wrong Forums.

  Here is the Vista Forums.

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions when repost you in the Office discussion groups above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Question about the graphics driver

  Okay so just close a week ago my laptop (ASUS K55a) has decided to freeze on me while I look a a video on youtube (essentially what I normally do after obtaining of reception class at night). After that, however, I turn on my laptop after forcing him to stop and while the mouse was mobile, I couldn't click on anything whatsoever. Its as if it was running, it took, the incredibly long just at startup and when he did, loading everything and takes a lot of time.  (I rebooted once a couple and even started in safe mode, nothing seemed to work)

  So the next day I decide the best option here is to reformat because I really can't do anything else to my knowledge base. After reformatting all, it seems to work very well, but here's the problem: whenever I try to install the graphics driver updated on the computer I get this error:

  

  He had what appeared to be some kind of basic graphic driver, but after searching for the name of this driver, the solution was that this particular driver was related to corruption. (Also to try to get windows to update this basic driver, he would sit there for about 10 minutes then would proceed in a BSOD).

  -If I run dxdiag.exe it shows s/o under the view tab

  -Graphics Card allegedly inside: Intel HD Graphics 4000

  -J' tried installing the following but it says that my computer does not meet the minimum requirements:

  Intel® Graphics Media Accelerator Driver, Windows 7 * 64, Windows Vista * 64 (zip)

  Data sheet:

  If someone knows the question here please let me know if there is anything, I can do to solve this problem, thank you!

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.
  
  
  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)
  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
  The procedure:
  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy (compress)
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
  Link to find out how to download below.
  http://www.WikiHow.com/use-SkyDrive
  To ensure the minidumps are enabled:
  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.
  Please also run MSinfo32 and download the output as well.
  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  System specs are extremely useful then please include everything you know.
  
  
  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of Windows/source here
  You can learn more about BSOD here
  You will learn how to test your memory ici
  An effective question gets help more quick read how here
  Pilot auditor-stalking a GIS behave driver here