R630: Idrac visible ethernet on linux

Similar Questions

• R630 IDRAC update package fails on Linux

  I saw several times, the update of the IDRAC doesn't lately of Linux, I have to use the web interface to apply it. My machines do not work OMSA, just a plain 6.6 Linux scientific. All other update packages work very well, but with the IDRAC, I get this message:

  Collecting inventory...
  .
  Being validated.

  iDRAC

  The version of this update Package is newer than the currently installed
  Version.
  Name of the software application: iDRAC
  Package version: 2.15.10.10
  Version installed: 2.10.10.10

  Continue? Y / N:y
  Execution of update...
  WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER DELL PRODUCTS DURING UPDATE
  IS UNDERWAY.
  THESE ACTIONS CAN CAUSE YOUR SYSTEM UNSTABLE!
  ................................................................   Peripheral USB is not found
  ..................................................................   Peripheral USB is not found
  .................................................................   Peripheral USB is not found
  ..
  Cannot access the virtual USB devices

  iDRAC
  Cannot access the virtual USB devices

  Cannot access the virtual USB devices

  Any idea on how to solve this problem?

  I solved this with the help of my colleague, as the update worked for her and not for me. The difference was the locale, its system is set to English, while mine is set to German. This parameter is transferred by the ssh connection to the server and iDRAC DUP does not work with the German locale:

  # sh iDRAC-with-cycle life - Controller_Firmware_VV01T_LN_2.21.21.21_A00. BEN - q
  Collecting inventory...
  ..
  Being validated.

  iDRAC

  The version of this update Package is newer than the currently installed
  Version.
  Name of the software application: iDRAC
  Package version: 2.21.21.21
  Version installed: 2.20.20.20

  Execution of update...
  WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER DELL PRODUCTS DURING UPDATE
  IS UNDERWAY.
  THESE ACTIONS CAN CAUSE YOUR SYSTEM UNSTABLE!
  .................................................................   Peripheral USB is not found
  ..................................................................   Peripheral USB is not found
  ................................................................   Peripheral USB is not found
  ..
  Cannot access the virtual USB devices

  iDRAC
  Cannot access the virtual USB devices

  Cannot access the virtual USB devices

  locale #.
  LANG = de_DE. UTF-8
  LC_CTYPE = "de_DE. "UTF - 8"
  LC_NUMERIC = "de_DE. "UTF - 8"
  LC_TIME = "de_DE. "UTF - 8"
  LC_COLLATE = "de_DE. "UTF - 8"
  LC_MONETARY = "de_DE. "UTF - 8"
  LC_MESSAGES = "de_DE. "UTF - 8"
  LC_PAPER = "de_DE. "UTF - 8"
  LC_NAME = "de_DE. "UTF - 8"
  LC_ADDRESS = "de_DE. "UTF - 8"
  LC_TELEPHONE = "de_DE. "UTF - 8"
  LC_MEASUREMENT = "de_DE. "UTF - 8"
  LC_IDENTIFICATION = "de_DE. "UTF - 8"
  LC_ALL =
  # LC_ALL = C sh sh iDRAC-with-cycle of life - Controller_Firmware_VV01T_LN_2.21.21.21_A00. BEN - q
  Collecting inventory...
  .
  Being validated.

  iDRAC

  The version of this update Package is newer than the currently installed
  Version.
  Name of the software application: iDRAC
  Package version: 2.21.21.21
  Version installed: 2.20.20.20

  Execution of update...
  WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER DELL PRODUCTS DURING UPDATE
  IS UNDERWAY.
  THESE ACTIONS CAN CAUSE YOUR SYSTEM UNSTABLE!
  ..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
  The update has been completed successfully.

  This LC_ALL = C for cleaning up the environment should be part of the DUP anyway.

• Equium P200: realtek ethernet adapter Linux installation error

  I have an old Equium P200 - 1Ed, who started to play up.

  When I try to install Linux, it gives me an error for realtek ethernet adapter and I studied the problem on the forums.

  Apparently, my hard drive is old and decrepit.

  I tried to reinstall Vista from the default Toshiba CD, just out of curiosity, and installed fine, except, seemed unwilling to connect internet.

  Tried Linux, but still the same problem from realtek.

  Apparently I can download the driver bios flash and try to reinstall the bios... it looks like my last hope.

  Anyone know where I can get the bios driver for P200-1ED?

  Updates to the BIOS, you can find on toshiba BIOS support page - http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp

  To be honest I don't know if the BIOS update will help with the installation of Linux, but you can try it.

• Lenovo G510 Linux - system freeze downloading complete

  My Lenovo G510, with Qualcomm Atheros AR8172/8176/8178 Fast Ethernet Controller, almost constantly completely freezes when downloading via ethernet on Linux. In Windows 7, it works perfectly, so it's not a hardware problem. I tried various Linux distributions, 32 and 64-bit (Ubuntu 14.10, 14.04, Linux Mint Debian Edition, Fedora 20 etc.) -all behave in the same way. It always happens when you download large files (like a linux iso file) and sometimes even during the download of the smallest (such as trying to install applications of deposits online, or even try to update the repository of the respective linux distribution database). When freezing occurs, the system becomes completely insensitive, I can't yet move to another virtual terminal.

  I would try a bios update, but there is a newer version of the bios for my model on the lenovo site, it says that it's only for Windows 8 and 8.1 - which I do not, and I fear that it could interfere with the functionality of my Windows 7 operating system.

  How to solve this problem so that I am able to use linux, do you have advice?

  Update the bios to Version 79CN50WW (V3.09) solved the problem. Now it works perfectly.

  http://download.Lenovo.com/Consumer/mobiles/viwgq309.exe

  I don't know about you, but the update to the bios may need to be executed under Windows 8 or 8.1. I ran under 8.1.

• HP Mini 1000MiE tranfer files - net usershare returned error 255

  My mini was just delivered. So I try to transfer files from my old Dell Latitude on Ubuntu to the Mini on a Netgear wireless router

  I put the files on the Dell to share. But the Mini does'nt find them well that he does not see a corresponding to the Dell printer Windows workgroup.

  The Mini does none of the files in the working group.

  When I tried to go the otherway to see if the Dell could see files shared on the Mini. I received a request to install 'actions' on the Mini and now when I try to share a file this error message.

  'net usershare' returned error 255: net usershare: cannot open/var/lib/samba/usershares usershare directory. Error Permission denied
  You may not create a usershare. Ask your administrator to grant you permissions to create a share.

  Now, I have two groups of windows work visible on my Linux machines but no files inside.

  How can I transfer files between two computers on Linux via a wireless network? It will not be a big problem.

  I am new to the Mini, but not in Ubuntu. I have not found how to open a command line terminal on this machine yet.

  I would really appreciate help on this issue.

  Transfer files between linux machines using a program called ssh. I found information on the web. It was not very difficult.

  Never got the two machines to connect using the shared windows resources, now I don't have to.

  Error 255 was a matter of a box under 'users' to allow file sharing.

  I also found the command line terminal hidden but available.

  Had a difficult start with the crumb of the Mini, but I am more familiar with linux OS crumbs now.

• 2nd Ethernet not visible - Linux Zimbra

  I have vmserver running on Linux Zimbra who got 2 inside ethernet cards.

  I created a Windows 2003 Server vmx on it, but when I run the present I don't see a connected ethernet.

  I tried to change the file vmx as below,

  ethernet0. Present = 'TRUE '.

  Ethernet1. Present = 'TRUE '.

  But this second interface is still absent from the Windows 2003 VM machine. Any ideas please?

  You need to re - run vmware - config.pl to add a second open network eth1 or what is the second NETWORK adapter device, assuming that you have set the adapter originally jumpered on eth0 or whatever. Once this is done, in the web user interface, select the virtual computer in the left pane and add material as directed by the attached screenshot and select whatever you called the second adapter jumpered when you run vmware - config.pl.

  Addressed in the manual - http://www.vmware.com/pdf/vmserver2.pdf

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Tecra 8000, linux & ethernet & pnp

  Hello

  I am trying to install Linux on a Toshiba Tecra 8000. The problem is with a chipset Realtek ethernet PCMCIA card (module: 8139too), which is recognized, but the network is unusable. I always get an error of SIOCSFFLAGS and assigned interruption is 0, which means that it has failed. I have read many times that I have to disable plug-and-play, but there is no choice when I start with a floppy and run the TSETUP. EXE. Y at - it an alternative to this? Do you have any other clues?

  Thanks, Thomas

  Hello

  Perhaps the following site will help you solve the problem.

  Here are 2 official linux Toshiba sites and there are also some tips.

  http://newsletter.toshiba-tro.de/main/index.html

  http://Linux.Toshiba-DME.co.jp/Linux/index.htm

  PS: You can also enter the BIOS if you press the ESC key immediately after lighting NB!

  Goodbye, Meier

• Installation of Marvel Yukon 88E8040T Ethernet on Satellite U405 using Linux

  Sorry for my English. I am writing from Brazil, and the only reason I'm not posting in Portuguese is because I want to let this information available for a larger number of users.

  I had a few problems although the Marvel Yukon Ethernet PCI on my Debian installation. I bought this laptop because it seems feet all my needs, with a good size RAM, processor and HD (the only problem is the computer keyboard, which are starting to make noises of ugly typing after a while).

  This post is dedicated to helping other users who want to use almost any flavor of Linux to their specifications U405 series.

  In the first place, in order to have a work of U405-S2854 laptop with good resolution of 1280 x 800, I had to abandon my old friend Debian Etch (stable - 2.6.18 kernel) and installation of Debian Lenny (testing - 2.6.24 kernel) because the package 'xserver-xorg' in Debian Etch problems to recognize the Intel VGA controller. I spent hours looking for a good solution to [www.intellinuxgraphics.org | www.intellinuxgraphics.] org Web site] without success.

  Well well... a little conversation and a LOT more action:

  If you have installed a 2.6.18 kernel or the oldest one, the X server will probably be able to recognise your VGA controller and configure it as a VESA adapter, using resolution 1024 x 768, if you are satisfied with this (poor) resolution just go on the site [http://www.marvell.com/drivers | http://www.marvell.com/drivers] download, install your new Ethernet controller and live happily ever after.

  But if you use a 2.6.24 kernel from, then the X server can really identify your "+ VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller +" you can face some problems to install your Ethernet card. The good news is that I found someone who has solved the problem!

  All you need to do is open a terminal and copy - paste the following commands.

  . $ sudo knew.
  (enter your password)
  . # rmmod sky2
  . # cd/lib/modules / 'uname - r' / kernel/drivers/net
  . # cp Pei sky2.ko {, .orig}
  . # perl - pe s/\0\0\x6c\x43/\0\0\x55\x43/g ' sky2.ko.orig > sky2.ko
  . # echo sky2 > / etc/modules
  . # modprobe sky2

  Here's the URL that has made my life easier [http://ubuntuforums.org/showthread.php?p=5285654#post5285654 | http://ubuntuforums.org/showthread.php?p=5285654#post5285654]

  I hope this tip is helpful to you as it was for me!

  Kind regards.

  Wow, your teaching is very good and very clear. I appreciate it because I tried to install Ubuntu on my Sat A200 and this machine has also a Marvell chip.

  Thanks for the great info. :)))

  Welcome them

• Satellite C660D-178: ethernet on a usb Linux support does not work

  Hello

  I found that none of the two usb ports can handle ethernet via the usb port. This is a usual Linux feature - when you connect two computers with a usb cable, it can function as a network interface.
  Surprisingly, C660D-178 appears to be the very first machine, with that I found that it doesn't work.

  Why?

  No chance to activate?

  Thank you
  D.

  Hello

  USB never tested and used by Ethernet but there is a tool called USB Over Ethernet
  It s 15 days trial version and compatible with Windows 2000/XP/2003/Vista/2008/7

  You can try to test this using a version of Windows in this case you can know if it s linux question or maybe this feature is not supported by the hardware

• Linux or Windows cmd iDRAC access tool and change the settings of the bios/iDRAC remotely.

  Hello

  Is it possible to change the settings of the bios/iDRAC remotely via the tool command line Linux or windows for iDRAC8 based server?

  If so could you please provide the download location?

  w*w.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=6RWMR

  You can install on a Windows machine and use the command "racadm" command line.

• VW Wkstation 8.0.2 Linux + multiple Ethernet devices

  Hello

  
  I installed Vmware workstation 8.0.2 on Ubuntu 11.10.  I'm looking to bind manually (bridged) 8 ethernet devices.

  I have 9 physical network interface cards in my numbered machine eth0 - eth8

  After installing vmware, I vmnet0 and vmnet8

  When you use the Network Setup, I see the option to add a vmnet.  So I add vmnet10 - vmnet18 I think try to bridge vmnet10 to eth1 and eth2 to vmnet11.  But I can't fill other ethernet devices because they do not appear in the drop-down menu.  It seems that vmware only 'sees' two of my 9 available ethernet devices.

  Is there a way to say vmware I did more ethernet devices?

  It is a stupid bug in the network Editor. Came across this a few times myself.

  Have a look at/etc/vmware/networking and manually add the necessary lines "add_bridge_mapping". (Close the network Editor while you are editing manually.)

  After restart vmware or use vmware-networks - power and the networks should work properly.

  Best regards, Marc.

• I can't insert hyperlink or image in my mail even after reinstallation of tb in linux mint 17.1... no visible drop-down list

  There is no other problems writing a mail, when I press the Insert button. Project window loses his shadow, and I can only return to the entry by pressing ESC. Already tried-backup mode, re-boot and re - install Thunderbird 31.7.0. I forgot something? I have worked fine until yesterday.

  What to Insert menu > picture? does it work?

• How to get the console on cRIO based on linux?

  Hi all

  I develop new things on a cRIO 9068. This cRIO runs Linux RT.

  I built a framework of cRIO app and use for several years, I use the console to debug my code and have the status of my displayed cRIO.

  I can't find a way to see the console with the 9068 when I send strings to it (see the simple example attached to this post).

  Can someone help me see that I send to the console?

  BTW: I do not want to write debugging on the serial port, only to watch channels.

  In fact, in order to obtain the result (which is for the port series, either through the exit option "monitor" that requires activation of the console series see, or the serial port as usual without configuring the console out) to be visible, the network, there is not a great, simple way to do a little more ethernet today.

  One option you have is to change how lvrt is launched to save to a file and to access this file (either from lvrt, webdav or ssh), wrote messages on the screen. It is a more down-n-dirty approach, but he could get the results you wanted.

  Change the /etc/init.d/lvrt-wrapper or/usr/local/natinst/labview/lvrt-wrapper file to channel the monitor console to a file

  (note that brackets [] denote a touch, the lines that begin with / / are notes and does not have to be entered)

  VI/location/of/lvrt-wrapper

  Go to the line that looks like 'exec. "/ lvrt.

  [i]

  Add the following code at the end of the line

  [space]>[space]/home/lvuser/lvrt.log

  [:] [w]

  The line should now look like 'exec. "/ lvrt > /home/lvuser/lvrt.log.

  Restart your target, check the contents of the file with "cat /home/lvuser/lvrt.log.

• The PowerEdge 6850 with RHE Linux server management

  We have a PowerEdge 6850 with Red Hat Ent. 5 Linux installed.  I have difficulties to access remote management.  The machine has two network ports and it also has a PCI card with a VGA and Ethernet port... not exactly even.  I got a bit of a mess here...

  The server administrator seems to already installed in/opt/dell/srvadmin.  If I run /opt/dell/srvadmin/setup.sh I get the following:

  #./setup.sh

  ##############################################

  Custom of the administrator of the Server Setup utility

  ##############################################

  Server Administrator version 5.3.0 is currently installed.
  Components installed are:
  -srvadmin-deng - 5.3.0 - 438
  -srvadmin-jre - 5.3.0 - 438
  -srvadmin-omhip - 5.3.0 - 438
  -srvadmin-racadm4 - 5.3.0 - 438
  -srvadmin-iws - 5.3.0 - 438
  -srvadmin-storage - 5.3.0 - 438
  -srvadmin-syscheck - 5.3.0 - 438
  -srvadmin-happy - 5.3.0 - 438
  -srvadmin-omilcore - 5.3.0 - 438
  -srvadmin-ipmi - 5.3.0 - 438.DUP
  srvadmin-omauth - 5.3.0 - 438.rhel5
  -srvadmin-rac4-components - 5.3.0 - 438
  -srvadmin-racdrsc4 - 5.3.0 - 438
  -srvadmin-isvc - 5.3.0 - 438
  -srvadmin-cm - 5.3.0 - 438
  -srvadmin-omacore - 5.3.0 - 438
  -srvadmin-racsvc - 5.3.0 - 438

  Do you want to 7.3.0 Server Administrator?
  Press ('o' for Yes |) 'Enter' to exit): y
  Error: Check if the server admin media are corrupt.
  If you use the Web pack to install Server Administrator,
  Make sure that you use the corresponding Web pack to the
  architecture and operating system on your system.

  #

  Yet, I am unable to reach any kind of remote web interface or web server management interface.  Please help me to get access to the management of the system.  The priority is to access the administration of two paintings by MD1000, we connected to the 6850.  Thank you

  You can try a different browser? Older versions of the iDRAC of security can do not meet the requirements of more recent browsers.

• iDRAC on Dell R610 problem

  Hello

  I just got a new Dell R610 and I tried to configure the iDRAC on her card. I have it configured on interfaces of multiple T300 Dell and the ILO on the different models of HP servers successfully. But for some reason, I'm going to have serious problems with it.

  I think he got an iDRAC Express card as there is no extra ethernet port on the server, just the standard 4 integrated NETWORK interface the iDRAC BIOS are version 1.70 I understand is the last.

  In the screen configuration (Ctrl + E) iDRAC, iDRAC and IPMI over LAN are enabled. Selection of NIC is set to shared so for active LOM, it reports 'No. Active LOM'. VLANs are disabled, iDRAC Express stand them? -Once it works I would like to enable it if possible.

  Only NIC1 (eth0) is connected to the switch. I tried configuring it with DHCP, but he never does an address even if the operating system gets a.

  To remove the switch / VLAN even tried to connect NIC1 directly on an other server tcpdump and running with iDRAC configured with a static IP (the default value of 192.168.0.120). Did not get a thing of it. I could see the arp requests going out but not responses to iDRAC.

  So, how do you get the iDRAC to work?

  Thank you.

  Today technician Dell replaced our motherboard and this fixed a problem with the DRAC.

  New motherboard uses older versions of BIOS and DRAC BIOS main:

  principal: was 3.0.0, now for 2.0.11
  DRAC: was 1.70.21, now 1.41.13

  DRAC works now, and, Yes, she has the web interface.

  PS unfortunately, but this will not be fixed another issue we have with H200 controller or it's linux driver mpt2sas: https://bugs.launchpad.net/linux/+bug/777441 (ClxAdmin, if you use Linux on that server, what distribution of linux/version you are using?)