Race on the 3D object

Similar Questions

• How can I prevent the CS6 Illustrator including the weight of the race in the dimensions of an object?

  How can I prevent the CS6 Illustrator including the weight of the race in the dimensions of an object?

  Custom,.

  Based on a different interpretation, namely that you wish to have the center of running the desired diemnsions and those who have reflected, uncheck the box Edit > preferences > General > use Preview Bounds.

  A real killer if not desired.

• Why the race appear above other objects?

  Please see the screenshots

  On the right side, each of the four objects placed on layer 2 and the objects on the left side are placed on the left side.

  The problem is with the layer 2.

  You can see the line of the object is visible to other objects while the background is not displayed. In addition, I applied shadow on layer 2 by targeting.

  I think if there is something else that's why terms appears on other objects.

  Please tell me what is happening in reality.

  Target 'Layer 2' and in the appearance Panel, move his race under the 'content '.

• Help with STROKE widgth - increasing race outside the area.

  I'm new to Illustrator. Having a problem with my race and following with a tutorial. As you can see in the screenshot below when I increase my line width, it increases outside of my object. In the video it aligns perfectly with its object. The lines are clones of the black object beneath it. If I try to resize my red outline alignment is off considerably.

  Video: creating professional Logo - Adobe Illustrator CC (mypage) - YouTube

  

  Another thing, when I make my object one stroke, it is automatically larger than my object. As shown here:

  

  I think that it is the root of my situation to start with. Is there a way to fix this? Obviously something I'm

  hurt in the first place.

  Any help is greatly appreciated.

  jesterdev,

  What STROKE align inside in the contour palette (instead of in the Center)?

• Drops eye and sample a color without his race (and vice versa) object?

  Is it possible to sample the fill color of an object and apply to another object without tasting his race?

  And vice versa- taste the contour of an object and apply it to another object without tasting its Fill Color?

  
  

  Any suggestion is appreciated. Thank you!

  
  

  Select the other object.

  Focus the fill or stroke (depending on which you want to apply color to).

  Shift-click on the fill or outline of the object that you want to copy the color of.

• How to 'hide' a single stroke behind the other object?

  I'm struggling with something that shouldn't be this difficult!

  I'm planning a logo white T-Shirt only (to go on a dark green T-shirt)

  To simplify, let's say I have two ovals with no fill, just a white line.  A small oval overlapping (sur-haut of) the part of the edge of a larger (oval below).    I have

  Any advice on how to 'hide' the line which is "behind" the top object?

  As follows: http://i.imgur.com/ZghWTMa.jpg  

  Actually, I'm not completely sure yet.

  Response to Steve assumes silkscreen with a single opaque white ink. It will not work if the composite impression not opaque transfers or cut out the vinyl applied, or if you import the work of two-ellipse for combination of other works of art.

  Because you do not know:

  1. draw two circles with a stroke color and fill color (ex: feature black, white fill) on both.
  2. apply the weight of the desired race.
  3 object > path > describe stroke.
  4 pathfinder palette: merge.
  5 white pointer: select both within the regions and remove.
  6. you now have a single compound path; None of the objects that overlap and real 'holes' where you want the substrate to show through. Applies regardless of the fill color (white, etc.) that you need.

  But keep in mind what has already been said: white, unless it is defined as a spot color, does "not print." Think in terms of inks, not in terms of 'color '. In a program like Illustrator, 'white' normally means "no ink". And we must always know what printing method that you design.

  JET

• Simple question about the race of the Illustrator borders - help please!

  Hello

  I'm new to Illustrator, and I can't understand something.

  I have a simple rectangle with a fill color, say red and a color of outline of us Let's say blue. Then, I use the drop down menu on the horizontal tool bar options change the race of a simple contour to something that looks more like a decorative edge. In CS4, I use the last option on the drop down menu, which has to stroke brain/border corners around the inside of the curve. When I chose this option, the filling remains as a rectangle with sharp corners that 'out' where the accident vascular cerebral/border curve inwards.

  I would like to know how to keep the race/border while getting rid of corners of the rectangle that die. I tried the erasure of the rectangle, but negatively affecting the border/stroke shape.

  Thank you very much for your help.

  David

  There are a few ways (or maybe more) to do. Both involve separating the object into two parts, one with a fill and no respect and the other of a sudden and no fill. Make sure that the trace object is on top and apply the brush line, then lock it. Add and remove anchor points at the four corners to get the below form (magenta rectangle) that will be hidden by the brush line. You can also do it using object > decaying appearance to generate the two forms of the original.

  

• After downloading 4.0 I get this message: application JavaScript is unable to create the plugin object of mcafee: TypeError: components.classes['@ [cid] is undefined

  I finished to download Firefox for my Mac OS 4.o. X.
  When I try to open a Web site, I get the message:
  [JavaScript Application] cannot create the plugin object of mcafee: TypeError: components.classes['@ [cid] is undefined
  If I click on the OK button, the site opens, but without the alert McAfee at the bottom of the window.
  I had just downloaded 3.6.16 and got box suggesting version 4.0 download for better security, but that seems to be where the problem is!

  This indicates that an add-on that you use is not compatible, considering the other errors, maybe it's the McAfee add-in. To confirm that the module is originally, use the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

• How you can group objects without deleting existing animations of the main object?

  I would like to know if its possible to avoid to remove animations when the grouping.

  For example, I have a group of objects that have animations, and I would like to add another object to this group without deleting the group entertainment.

  If you want a set of objects to animate separately, do not group together them. Instead block them;   (Arrange > Lock)

  You can add other objects to add and lock slide then those.

  Individual objects when grouped (Arrange > Group), become indeed a single object, unique objects have only an animation, all the individual objects that have animations will lose their when grouped together.

• Is it possible to see mile splits after a race using the Apple Watch?

  After a race using the Apple Watch I'd like to see my thousand intermediate time. Is this possible?

  Hello

  On your iPhone, in the application of the activity: scroll to training > tap training > click shares.

• Binds the data object graph, causing memory

  Hello

  I want to create a WPF application that uses Measurement Studio to display the data points on the graph.

  We have already implemented a HAL, the data in the reports of the UI (after a few manipulations), using the DAQmx.

  I saw in your examples you display only the last second points, but my users can choose to see the data in an hour, and if I continue in the data memory of the points for the last hour I get out of memory (the data object become very big).

  How can I display in the chart of the data of the last X minutes / hours without keeping all the data in memory?

  Sorry, it was my fault (the years were defective in my local test as well, just, I had not noticed). Fortunately, what makes the solution even simpler: the CustomXAxis implementation can change just object ISourceDataProvider.TryGetSourceDataStart() { return default(DateTime); } .

  Also, for future reference: to the changes of the properties in WPF, you must be a dependency property or INotifyPropertyChanged , but not both (i.e. didn't need you OnStartTimePropertyChanged in CustomXAxis ).

• 'Find the UI object' is not jump to certain controls

  I did a search and found other posts of 'Find the UI Object', but none quite match my observation.

  Here's the question.  I'd rather have my distributed signs in my UIR, without overlap.  This allows me to work on panels without getting lost.

  

  The problem with this model is that when I choose the context menu option 'Find UI Object' of a callback function, it takes me to the top of the UIR, not down below were the Panel is located.

  If I do the same steps for a control that happens to be in a panel near the top of the UIR, then fine.  The IUR is simply not scroll down to show me where the control is actually.

  What version of the CVI are you using? Until 2012 of the CVI, I observed a behavior similar but only for the controls on the tab panels. I posted a suggestion in the exchange of ideas on that CVI: you can comment on this idea by adding your experience and/or congratulations to support.

• Cannot bind to the shared object created with LabVIEW 2009

  I have problems referring to a shared library built from a LabVIEW VI under RHEL 5 with LabVIEW 2009.

  To illustrate the problem, I created a VI with a digital input and output that corresponds to a certain number. Then, I created a draft specification of build to create a shared library with a feature that makes use of this VI square. The shared object is created successfully (square.so).

  When I try to compile a test application written in C, that connects to this library, I get errors in the following link:

  cc  -I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintools build/square.so  test.c   -o test/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'collect2: ld returned 1 exit statusmake: *** [test] Error 1
  

  Running ldd reveals that liblvrtdark.so.9.0 is used for the execution of labview.

  In order to investigate on what could be the cause of the problem, I have compiled the nidaqmx basic examples, and I don't have an error. Current running ldd as reveals that he uses liblvrtdark.so.8.2 for the view of laboratory, time of execution.

  My suspicion is that some components of labview are being compiled with gcc 3.4 while others are being compiled with gcc 4.1 (which is the default compiler in RHEL 5).

  Any ideas how I could fix the build errors?

  Thanks in advance for your suggestions.

  PS.

  I enclose a tar file with the source files and here are the details of the ldd:

  ldd build/square.so         linux-gate.so.1 =>  (0x008de000)        liblvrtdark.so.9.0 => /usr/local/lib/liblvrtdark.so.9.0 (0x00b9c000)        libc.so.6 => /lib/libc.so.6 (0x00110000)        libstdc++.so.6 => /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 (0x009a7000)        libm.so.6 => /lib/libm.so.6 (0x00756000)        libdl.so.2 => /lib/libdl.so.2 (0x00256000)        libpthread.so.0 => /lib/libpthread.so.0 (0x0025a000)        /lib/ld-linux.so.2 (0x00b80000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00272000)
  
  ldd /usr/local/natinst/nidaqmxbase/lib/libnidaqmxbase.so.3.3.0         linux-gate.so.1 =>  (0x00e50000)        libnidaqmxbaselv.so => /usr/local/lib/libnidaqmxbaselv.so (0x00248000)        libc.so.6 => /lib/libc.so.6 (0x00689000)        /lib/ld-linux.so.2 (0x00b80000)        liblvrtdark.so.8.2 => /usr/local/lib/liblvrtdark.so.8.2 (0x00e51000)        libdl.so.2 => /lib/libdl.so.2 (0x00813000)        libpthread.so.0 => /lib/libpthread.so.0 (0x001b0000)        libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0x009c7000)        libm.so.6 => /lib/libm.so.6 (0x00b0a000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x0050c000)
  

  Hi mimi,

  I'm happy to report that I managed to get the code to work. I have included some of the steps I experienced the problem in case it might help improve the documentation or future generations.

  In response to your question about the "error 1" reported by do, it's just an indication that detected a compiler error (it probably resembles the return code of the compiler).

  The errors ' undefined reference... @GLIBCXX_3.4.9 "have been narrowed down. The generated labview shared library, the square.so, links to /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 which is a symlink to usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6.0.9. I decided to compare this version of libstdc ++ that included with RHEL:

  strings /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_3.4.9GLIBCXX_FORCE_NEW
  

  strings /usr/lib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_FORCE_NEW
  

  So libstdc ++ RedHat does not include a string for GLIBCXX_3.4.9.

  With this in mind, I was able to get my test application to compile using the version of LabVIEW libstdc ++ using the following makefile:

  .PHONY: all cleanCPPFLAGS=-I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintoolsLDFLAGS=build/square.so \        /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 \        -Wl,--rpath -Wl,/usr/local/lib/LabVIEW-2009/patchlib/
  
  all: test
  
  clean:        rm -f test *.o
  

  When you try to run the application, I got the following error:

  ./test: error while loading shared libraries: /usr/local/lib/liblvrtdark.so.9.0: cannot restore segment prot after reloc: Permission denied
  

  But apparently, it's because of SELinux prohibiting the use of libraries shared with moving text.
  This can be disabled by running /usr/sbin/setenforce 0 as root.

  The test application now works!

  See you soon,.

  RW

• How the binary objects are sorted

  Live treatment image "IMAQ particle analysis" and "IMAQ MaskToROI.vi" returns the characteristics of binary objects detected in a specific order. My question is how objects are sorted before results are returned.

  Look at the following example. I'm totally confused why two screws returned the second object in the first row first?

  I was trying to get the centers of each object (and their contours) and assuming that they were sorted by their positions on the y-axis first and then positions itself on X. It is most of the time, until you see here on the first line. What happened here? Why the second object is sorted as the first object? HOW the binary objects are sorted anyway?

  

  I got it. It has to be sorted by the corner up and left of the rectangle of the object.

• Save for precedent: the "Attachment" object does not exist in the previous version

  I'm trying to save a very simple VI from LabVIEW 2013 SP1 to LabVIEW 2009 but I get this strange error.  The VI contains only basic ex that are available in all versions of LabVIEW (shift logical AND Select,<=, u8). ="" when="" i="" try="" to="" save="" it="" for="" labview="" 2009,="" it="" gives="" me="" the="" following="">

  Missing object.  The "Attachment" object does not exist in the previous version.

  I thought first of all it had to do with being possessed by a lvclass, but even after that I removed the class (and unplugged from the lvclass) it always gives me this warning.

  When I try to open it with 2009, it will fail to load the schema-block (error 6).

  The next thing I tried was to copy the block diagram for a new VI and re - create the connector pane, but that doesn't change anything.

  Any ideas?

  Maybe "attachment" made reference to an attached comment (the arrow of a free label for an object on the diagram). I don't expect the presence of attached comments to cause a SFPed VI to not open, but it's the only thing I can think of. Try to remove any comment attached to your diagram and SFPing and see if that solved the problem.