Radio Bluetooth installation

Similar Questions

• Satellite L750-176 - Bluetooth installation fails

  Hello
  I tried to turn on bluetooth via FN + F8 on Windows 7. After allowing the system tries to install the bluetooth driver Bluetooth stack. When installing, I get an error message "could not turn on Bluetooth monitor. Please activate the Communication of wireless switch located on one side of the main unit. »
  There is no switch on the computer toshiba laptop!

  After that, I have to cancel the installation. I already took a peek in the forum, but didn t find a solution.
  I have already restored the image original Toshiba Windows 7 and reinstalled the packet filter bluetooth and battery bluetooth but this didn t the problem fix.

  Any ideas how to solve this problem?

  Thanks Mario

  Post edited by: Edin
  added could not turn on turn Bluetooth power on. Please activate the Wireless Communication switch
  Located on one side of the main unit. »

  Hello

  The laptop seems to be equipped with a combo of Atheros Wlan card. This combo card also supports BT connectivity.
  But before install you the BT stack you must install first the filter of Bluetooth driver Package that can be downloaded from the European driver Toshiba page.
  This very important.

  By the way: you are right. There is no switch to turn on the WLan. You must use the FN + F8 to activate / disable the WiFi or BT

• Re: Detection of Bluetooth, installation on WinXP SP2 32 devices

  Hi all

  I have Toshiba Satellite A200-1CR (PSAE0E) which has the internal bluetooth device (I think that the manufacturer is, pa3608u-1btm taiyo yuden co.) Ltd. has been unable to verify
  cause couldn't open the back casing of the laptop). I downloaded the latest drivers for WinXP 32 SP2 on the official driver for BT and BT monitor or Tohisba site.
  Toshiba Stack and has installed respectively (installation battery please plugin device which is not recognized by the operating system), when the computer starts it is
  hardware detection, but no specific information about the detected material other than "Hardware ID" ACPI\TOS1900; "Device Instance Id" ACPI\TOS1900\2 & DABA3FF & 0 (which I doubt is
  BT device, if not there is not trace device BT not even under hidden devices). I tried to install that manually, but this time OS complains that the software is not compatible.

  After Google search on the net and who cross through this forum, I found that WinXP 32 is usually prone to detect internal BT, possible solutions are:

  * Rename the %WinDir%\inf\bth.inf nth.bak and reainstalling battery Tohisba which did not work in my case.
  Changing certain variables/s under ...\TOSHIBA\Bluetooth Toshiba Stack\Drivers, which I do not know where or what?

  PS Do not forget that before installing the BT monitor and battery I uninstalled previously installed versions and purged the registry.

  Any suggestions in advance will be appreciated.

  Kind regards

  To be honest I didn t done that for a long time but if I remember correctly you need to the first BT stack install and after restarting the laptop simply allow BT using the FN + F8 key combination. After this BT driver will be installed and as final step BT module is recognized correctly and also listed in Device Manager.

• Driver Bluetooth installs not on Satellite A100-466

  I buyed this laptop yesterday and the only thing I still need to install is the stack of BT and BT drivers.
  When I hit fn + f8 to start bluetooth it starts the installation but once he starts to install drivers bluetooth windows gets crazy and constantly detects hardware and installs and reports a problem.

  There was a problem installing the hardware and starts over and over again until I finish the installation.

  I downloaded the last of this site, but the problem is the same.

  Hello

  Are you sure that this device supports BT to 100%?
  If the device supports a Bluetooth device so you should find a label of BT on the bottom of the unit...

• Re: bluetooth installation error code 2753 not marked setupdui.exe to install.

  I was triying to install the bluetooth stack and the installation package produces the error code 2753.
  what it means?
  How can I solve this problem?
  My computer is satellite A300-14 t
  Please tell me not driver download (so far I did 4 times)

  Take a look at the discussion that follows. I think it solves your problem.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=115489𜌡

• Bluetooth installation problems

  Hello

  I have a few problems installing BT very frustrating. I have a Satellite Pro P200 with Vista installed which works well since January. A couple of weeks ago, I upgraded my cell phone that has Bluetooth and thus for the first time that I set up a Bluetooth connection between the phone and the laptop.

  Everything was fine for a while until I noticed that the personal network BT had an exclamation mark against it in Device Manager. I launched a series of uninstallation fails and reinstalls of the last stack of BT from the download area of Tosh and in desperation, the software of Nokia as well. The laptop is now in a State where BT installs (gently!) but has a problem with installation of STOVE again. Also, after installation, the BT Toshiba Manager begins a search for BT devices and gets stuck in an endless loop. Similarly the Nokia Software does not seem to respond at all.

  In my view, the BT stack is in a State, but I can't seem to clear the system enough by uninstalling BT stack and software from Nokia to get a clear install without errors. My Device Manager displays the following text:

  Bluetooth has RFBNEP, RFBUS, RFCOMM, RFHID, & Toshiba Bluetooth USB controller-5.
  Network adapters has Intel Wireless, Realtec NIC and Toshiba Bluetooth (with a yellow triangle against it).
  COM ports display COM15-21 and 6-7.

  If I look into the problem and reports there are the following:
  Description
  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.

  Signature of the problem
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: BTH\MS_BTHPAN
  Configure the class GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000001F
  Driver name: bthpan.sys
  Driver version: 6.0.6001.18000
  Driver date: 18/01/2008
  OS version: 6.0.6001.2.1.0.256.6
  Locale ID: 2057

  Files helping to describe the problem
  DMI7E43.tmp.log.XML
  LOG7EF0.tmp
  bthpan.inf

  Can someone help me clear up the mess that my system has become as its driving me nuts! I really don't want to have to reinstall Vista!

  Thank you

  Hello, Edward

  Have you tried to roll back OS at times earlier (before that the problem started) by using the System Restore tool?

• Stack Bluetooth installation fails

  I bought a dongle Bluetooth with the Toshiba Bluetooth Stack. Software installation is proceeding normally up to the point where it says "Insert the Bluetooth device and click Enter." I do this and stops the installation. I waited until half an hour, but he never went from 56 percent.
  I am running Windows 2000 SP4 on a 1 GHz Athlon. A lot of disk space and RAM. Tried to install it several times, even tried to close the firewall. Nothing makes no difference.
  Any suggestions?

  So please let me know what USB Bluetooth adapter are you using?

• Bluetooth doesn't work does not error: Server Bluetooth installation failure

  Original title: why does not install the Server driver Bluetooth?

  I have a HP Folio 13 running under Windows 7 64-bit.

  My bluetooth used to work, but now it isn't and I don't know why. I don't know if a driver had changed or anything. I noticed when I uninstall Intel Wireless Bluetooth or Microsoft Enumerator and restarting the computer, the installation of the bluetooth driver but it says that the Bluetooth server had no installation.

  It is not exclamation mark on any device in the Device Manager, but when I open devices and printers, there is an exclamation point next to my PC. When I ook to properties, then hardware, there's and exclamation mark near the Bluetooth server. I tried to reinstall the drivers.

  yesterday, I upgraded my OS to Windows 8.1, bluetooth works now

  I; m do not know why this happened.

  I hope that you can find out why this has happened as I prefer Windows 7 more

• Radio Bluetooth problem - windows 7

  Hallo

  I bought a new T500 with vista, Bluetooth worked perfectly. Now, I have installed Windows 7 64 bit on it. Windows automatically adds a generic bluetooth driver. I have clicked on the right button of the mouse on the bluetooth icon in the system tray, choose "add a new device..." ', it gave rise to a window saying 'search' but it has never detected something. (I tried to detect a bluetooth mouse, a pocket PC and a different computer). Then I installed "Bluetooth with Enhanced Data rate software II for Windows 7" of the page Web of lenovo, restarted the computer and repeat the same steps as before, but the result was the same again. Needless to say that the bluetooth radio was all the TIME (I checked the Fn + F5 and indicator under the screen to be sure). What may be a solution to this?

  I would be very grateful for your help.

  Thank you! in fact, I was looking through this forum until I found the reference to a PC-doctor. I installed the lenovo site and tested the bluetooth. He was allowed. Then appeared a balloon popup saying that new hardware has been found. After that all bluetooth have been recognized and I have succede to pair my mouse simply by changing some option in the settings.

• S5200-903 Bluetooth Installation PA3121U-1BTM

  Hello world
  I have an a S5200-903 where I want to install a Bluetooth PA3121U-1BTM map, which he said must fit into this computer. My problem is I don't know where it should be placed - and I guess I need an aerial cable - someone has an idea how to install this card into the S5200.
  Thank you very much in advance for your answers.

  Hello

  I found the info that any satellite 5200-902 comes with the BT module. Because of this, I'm not sure if other portable series 5200 have BT antenna inside. Before you buy this module, be sure that you can use it at 100%. Toshiba service in your country partner has information you need.

  Otherwise you can use the little stick USB BT. It is very simple to use.

• Satellite A100 - 683 PSAA9E: Bluetooth installation freezes in Vista

  Hello

  I have a toshba Satellite A100-683 and installed windows Vista, but when I want to install the BT-stack the first pass of the screen, but then the installation hangs.
  Anyone have the same problem?

  I find it very odd. I tried to install it several times but does not make any sense... I hope someone has the answer...

  Ron.

  Have you installed the Toshiba Vista drivers in the order as shown in the installation instructions which are placed on the page of the Toshiba driver?

  Please do!

  I installed Vista on my Satellite A100 and everything went smoothly without s gel so far

• Satellite C660-13 q-WI-FI and Bluetooth installation

  Hi, I have a problem after changing the internal drive of the laptop in the subject (PSC0QE-01000QIT).

  I installed windows 7 and ALL the drivers at this link

  but windows can't see the bluetooth or wi - fi, the only way to connect with the ethernet cable.

  The Toshiba utility Wi - Fi Protected Setup (WPS) says that: the wifi card is disconnected.
  I enabled using FN + F8, but it won't change anything.

  Please help me.

  Hello

  Maybe a stupid at first but why question you didn t install recovery image original tat you got with your machine (Win7 Home Premium 64-bit). This recovery image contains all the necessary drivers, tools and utilities?

  Anyway, check it please state of the hardware in the Device Manager. Wireless network adapter is listed under network adapters?

  According to specification for laptop, your laptop has card-combo-WLAN so after WLAN driver you need to install the Bluetooth driver filter Package.

• Lost my bluetooth installations when I reinstalled windows

  Yesterday, I reinstalled Windows Vista and now my bluetooth has disappeared. When I tried to reinstall the drivers it keeps stuck and then I checked in my control panel and there it shows no bluetooth icon I had before.

  Can someone help me please?

  If you do not install SP2 still do.

• printer bluetooth installation

  After following the instructions I can not install my printer - a HP 4680 J

  any suggestions

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP.

  http://h30434.www3.HP.com/

  HP Support Forums at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  How to setup a Bluetooth connection.

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-passkeys-for-Bluetooth-enabled-devices

  Using authentication keys compatible Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  The problems with Bluetooth devices

  Read the above and, if necessary, contact the manufacturer of the device.

  See you soon.

  Mick Murphy - Microsoft partner

• Pavilion dv7-4270us: dv7-4270us bluetooth does not work after driver update

  I recently updated my drivers from the HP website.  Now, I know it was a mistake that bluetooth has not been installed correctly.    And there is no option "driver restore.  I tried several times sp50180, according to the HP website and also tried the old version listed (sp49153).   They old version did not install correctly and a new seemed especially, but none of my Bluetooth devices that used to work to do now.   I can 'connect to' some devices but they cannot transfer photos, connect to the audio, etc.  Some devices that are used to work can still be seen when I say "add a bluetooth device".  After installation, in the Device Manager, I find the following:

  The radio Bluetooth: Bluetooth Broadcom 2070 and Microsoft Bluetooth Enumerator (both working properly)

  Human Interface Device: Bluetooth Remote Control (works)

  Modem: Modem Standard via a Bluetooth #2 link (works)

  Network cards (all working correctly):

  Device Bluetooth (personal area network)

  (Heading RFCOMM Protocol TDI) Bluetooth device

  (and my other network devices, all functioning properly also)

  Other devices: this is the problem area.  After installation and reboot, I always find myself with 10 entries "Bluetooth Peripheral Device", all with a yellow exclaimation mark and all say real estate "Other devices", "unknown" (GSM) and the location is "on Microsft Bluetooth enumerator". "."

  I tried right click and uninstall it, but when I reboot they come back to the top, search windows update, but can not find a driver and go straight to the "other devices".  I also tried to uninstall the "Broadcom 2070 Bluetooth 3.0" 'Programs and features' and right-click to delete each listed above bluetooth driver and then run the sp50180 again and it will install without error and find the same above drivers that work and leave the same 10 does not.  And my Bluetooth headphones (two different ones) is more work (or can be seen) and my Bluetooth phone can be 'connected' but any attempt to transfer fails.

  I've exhausted all ideas on the web, I could find, and none have helped.  I tried to load a restore point, but after having so many pilot facilities, there is no point of restoration with the appropriate driver.  A full backup of the system on another drive, but much changed the applications and data files so I cannot restore it.  Unless someone knows how to use a full backup of the Windows 7 system to restore only the Bluetooth driver.

  Another idea is that the driver update that messed up things maybe changed some other file or a registry setting that is not corrected by sp50180, but that seems unlikely.

  Is it possible to manually install each of the 10 'other devices' drivers?  If I right click on a defective device and select "update driver software" no matter if I select the drive C:\ or F:\ (my driver and software download drive) or automatic search (including online) - it does not find the driver files.  I also tried to select properties and 'put to day driver' but the same results.

  Any help would be greatly appreciated.

  I found a solution. I received a call of support in Mumbai.  HP gave me a free call because they were not able to set a guarantee repair questions, so gave me the free support call.  I took an hour, but ended up the solution was very simple.

  There were these problems:

  1) 10 'other devices' in device with the exclamation points Manager can be uninstalled, but still were automatically reinstalled with the same exclamation point.  No pilot was available to the public for them.

  (2) my phone under Bluetooth devices could connect but would not photos transfer.

  (3) neither my helmet Bluetooth would not work.

  The solution was simply to go to 'Show Bluetooth devices' and right-click on each and select 'Delete device' (even if dimmed they might still be revoked).  After all have been abducted there were no "other devices" in Device Manager.  I then added each Bluetooth device again.  This was very well all work.  I also noticed my phone was five drivers "Bluetooth Device" was so 5 of the 10 exclamation points himself.

  For some reason, deletion of the driver in the Device Manager has not deleted the list "Bluetooth Device".  And by uninstalling and reinstalling the drivers, it does not work.

  If the answer is simple.  Before removing the drivers Bluetooth first remove all Bluetooth devices.