S5200-903 Bluetooth Installation PA3121U-1BTM

Similar Questions

• S5200-903: possible start of the USB via?

  Hello

  I own a laptop S5200-903 (BIOS Version: 1.4) and I would get independent of the USB - FDD. Y at - it any way to simulate the floppy using a USB-Memory-Stick drive, so that the BIOS recognize the stick as a floppy drive with the ability to start from the key?

  Thanks for your replies.

  Best regards, rumbero

  Hello

  Unfortunately, I've never tried to boot on the USB and in my opinion it s is not possible. As far as I know on some Toshiba units, you can boot from an SD card but I don't think that it of possible to boot from a USB
  Sorry :(

  Good bye

• Re: Detection of Bluetooth, installation on WinXP SP2 32 devices

  Hi all

  I have Toshiba Satellite A200-1CR (PSAE0E) which has the internal bluetooth device (I think that the manufacturer is, pa3608u-1btm taiyo yuden co.) Ltd. has been unable to verify
  cause couldn't open the back casing of the laptop). I downloaded the latest drivers for WinXP 32 SP2 on the official driver for BT and BT monitor or Tohisba site.
  Toshiba Stack and has installed respectively (installation battery please plugin device which is not recognized by the operating system), when the computer starts it is
  hardware detection, but no specific information about the detected material other than "Hardware ID" ACPI\TOS1900; "Device Instance Id" ACPI\TOS1900\2 & DABA3FF & 0 (which I doubt is
  BT device, if not there is not trace device BT not even under hidden devices). I tried to install that manually, but this time OS complains that the software is not compatible.

  After Google search on the net and who cross through this forum, I found that WinXP 32 is usually prone to detect internal BT, possible solutions are:

  * Rename the %WinDir%\inf\bth.inf nth.bak and reainstalling battery Tohisba which did not work in my case.
  Changing certain variables/s under ...\TOSHIBA\Bluetooth Toshiba Stack\Drivers, which I do not know where or what?

  PS Do not forget that before installing the BT monitor and battery I uninstalled previously installed versions and purged the registry.

  Any suggestions in advance will be appreciated.

  Kind regards

  To be honest I didn t done that for a long time but if I remember correctly you need to the first BT stack install and after restarting the laptop simply allow BT using the FN + F8 key combination. After this BT driver will be installed and as final step BT module is recognized correctly and also listed in Device Manager.

• Satellite L750-176 - Bluetooth installation fails

  Hello
  I tried to turn on bluetooth via FN + F8 on Windows 7. After allowing the system tries to install the bluetooth driver Bluetooth stack. When installing, I get an error message "could not turn on Bluetooth monitor. Please activate the Communication of wireless switch located on one side of the main unit. »
  There is no switch on the computer toshiba laptop!

  After that, I have to cancel the installation. I already took a peek in the forum, but didn t find a solution.
  I have already restored the image original Toshiba Windows 7 and reinstalled the packet filter bluetooth and battery bluetooth but this didn t the problem fix.

  Any ideas how to solve this problem?

  Thanks Mario

  Post edited by: Edin
  added could not turn on turn Bluetooth power on. Please activate the Wireless Communication switch
  Located on one side of the main unit. »

  Hello

  The laptop seems to be equipped with a combo of Atheros Wlan card. This combo card also supports BT connectivity.
  But before install you the BT stack you must install first the filter of Bluetooth driver Package that can be downloaded from the European driver Toshiba page.
  This very important.

  By the way: you are right. There is no switch to turn on the WLan. You must use the FN + F8 to activate / disable the WiFi or BT

• Driver Bluetooth installs not on Satellite A100-466

  I buyed this laptop yesterday and the only thing I still need to install is the stack of BT and BT drivers.
  When I hit fn + f8 to start bluetooth it starts the installation but once he starts to install drivers bluetooth windows gets crazy and constantly detects hardware and installs and reports a problem.

  There was a problem installing the hardware and starts over and over again until I finish the installation.

  I downloaded the last of this site, but the problem is the same.

  Hello

  Are you sure that this device supports BT to 100%?
  If the device supports a Bluetooth device so you should find a label of BT on the bottom of the unit...

• Re: bluetooth installation error code 2753 not marked setupdui.exe to install.

  I was triying to install the bluetooth stack and the installation package produces the error code 2753.
  what it means?
  How can I solve this problem?
  My computer is satellite A300-14 t
  Please tell me not driver download (so far I did 4 times)

  Take a look at the discussion that follows. I think it solves your problem.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=115489𜌡

• Bluetooth installation problems

  Hello

  I have a few problems installing BT very frustrating. I have a Satellite Pro P200 with Vista installed which works well since January. A couple of weeks ago, I upgraded my cell phone that has Bluetooth and thus for the first time that I set up a Bluetooth connection between the phone and the laptop.

  Everything was fine for a while until I noticed that the personal network BT had an exclamation mark against it in Device Manager. I launched a series of uninstallation fails and reinstalls of the last stack of BT from the download area of Tosh and in desperation, the software of Nokia as well. The laptop is now in a State where BT installs (gently!) but has a problem with installation of STOVE again. Also, after installation, the BT Toshiba Manager begins a search for BT devices and gets stuck in an endless loop. Similarly the Nokia Software does not seem to respond at all.

  In my view, the BT stack is in a State, but I can't seem to clear the system enough by uninstalling BT stack and software from Nokia to get a clear install without errors. My Device Manager displays the following text:

  Bluetooth has RFBNEP, RFBUS, RFCOMM, RFHID, & Toshiba Bluetooth USB controller-5.
  Network adapters has Intel Wireless, Realtec NIC and Toshiba Bluetooth (with a yellow triangle against it).
  COM ports display COM15-21 and 6-7.

  If I look into the problem and reports there are the following:
  Description
  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.

  Signature of the problem
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: BTH\MS_BTHPAN
  Configure the class GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000001F
  Driver name: bthpan.sys
  Driver version: 6.0.6001.18000
  Driver date: 18/01/2008
  OS version: 6.0.6001.2.1.0.256.6
  Locale ID: 2057

  Files helping to describe the problem
  DMI7E43.tmp.log.XML
  LOG7EF0.tmp
  bthpan.inf

  Can someone help me clear up the mess that my system has become as its driving me nuts! I really don't want to have to reinstall Vista!

  Thank you

  Hello, Edward

  Have you tried to roll back OS at times earlier (before that the problem started) by using the System Restore tool?

• Stack Bluetooth installation fails

  I bought a dongle Bluetooth with the Toshiba Bluetooth Stack. Software installation is proceeding normally up to the point where it says "Insert the Bluetooth device and click Enter." I do this and stops the installation. I waited until half an hour, but he never went from 56 percent.
  I am running Windows 2000 SP4 on a 1 GHz Athlon. A lot of disk space and RAM. Tried to install it several times, even tried to close the firewall. Nothing makes no difference.
  Any suggestions?

  So please let me know what USB Bluetooth adapter are you using?

• Plantronics backbeat 903 bluetooth headset did not get recognized in WIndows Media Player

  Original title: very frustrated with can I Media Player and headphones from synchronization

  On the main screen of the player windows media after having connected the plantronics backbeat 903 to windows media player bluetooth headset device does not appear, my places bluetooth says it is connected, in Control Panel under sounds and then under the tab audio it is there as well.

  Please help me with

  All my best,

  Tim Hayner

  <>Address removed from privacy >

  Hello

  Turn off and then turn on Windows Media Player and see if it helps.

  a: Click on Start , then run.

  b: then, type Control Panel in the Run dialog box and press ENTER.

  c: Then click on Add/Remove programs.

  d: and then click Add/Remove components present in the left pane of navifation.

  e: Then expand multimedia features.

  f: then uncheck the option for Windows media Player.

  g: and then restart the computer.

  h: Then place a control on the option for Windows Media player.

  I: restart the computer.

  Hope this information helps.

• Bluetooth doesn't work does not error: Server Bluetooth installation failure

  Original title: why does not install the Server driver Bluetooth?

  I have a HP Folio 13 running under Windows 7 64-bit.

  My bluetooth used to work, but now it isn't and I don't know why. I don't know if a driver had changed or anything. I noticed when I uninstall Intel Wireless Bluetooth or Microsoft Enumerator and restarting the computer, the installation of the bluetooth driver but it says that the Bluetooth server had no installation.

  It is not exclamation mark on any device in the Device Manager, but when I open devices and printers, there is an exclamation point next to my PC. When I ook to properties, then hardware, there's and exclamation mark near the Bluetooth server. I tried to reinstall the drivers.

  yesterday, I upgraded my OS to Windows 8.1, bluetooth works now

  I; m do not know why this happened.

  I hope that you can find out why this has happened as I prefer Windows 7 more

• Satellite S5200 - 903 Hotkey function (Fn + F6/F7) monitor brightness

  Dear Forum,

  Recently reactivated this laptop as a backup with a nex HD solution.

  Which driver / program is needed to provide the shortcut key for the function?
  The itensity of display is very low and back, I was able to control it with this function.

  Thank you very much for the support and advice
  Tim

  To this old laptop models all works a little different than new models. You now have a package that contains all the necessary stuff for the FN feature.
  On old books as your Satellite 5200, you need to install several different tools to achieve this functionality of FN, no brightness adjustment only.

  So to make all this easier I recommend you to check the building for Satellite 5200 instructions and install all missing things. Please follow the order of installation.

  If you still need help let us know.

• Satellite A100 - 683 PSAA9E: Bluetooth installation freezes in Vista

  Hello

  I have a toshba Satellite A100-683 and installed windows Vista, but when I want to install the BT-stack the first pass of the screen, but then the installation hangs.
  Anyone have the same problem?

  I find it very odd. I tried to install it several times but does not make any sense... I hope someone has the answer...

  Ron.

  Have you installed the Toshiba Vista drivers in the order as shown in the installation instructions which are placed on the page of the Toshiba driver?

  Please do!

  I installed Vista on my Satellite A100 and everything went smoothly without s gel so far

• New HD for S5200-903

  Hello world

  I need to install a new HD on my Satellite 5200 903. Can someone tell me what serial number to order? I looked on the back of my laptop and there is no indication of a serial number.

  a new HD editing does not seem such a difficult thing, but I need to order the right one.

  Thank you

  G

  Hello

  As far as I know, this unit came with a 60 GB HARD drive.
  I found this part number: MK6021GAS

  Check out these sites:
  http://www.Baber.com/drives/internal_hard_drives/laptops/toshiba_mk6021gas_specs.htm
  http://www.Superwarehouse.com/Toshiba_MK6021GAS_60GB_Laptop_Hard_Drive/HDD2183/p/229315

  ----------------------------------------------------------

  The optional Slim SelectBay HDD adaptor is necessary for inclusion of this HARD drive in the SelectBay.
  HARD drive: Part No.: PA3204U - 1 H 60
  Adapter HDD SelectableBay PA3223U-1ETC

  http://www.Superwarehouse.com/Toshiba/PA3204U-1H60/p/432021

• Satellite C660-13 q-WI-FI and Bluetooth installation

  Hi, I have a problem after changing the internal drive of the laptop in the subject (PSC0QE-01000QIT).

  I installed windows 7 and ALL the drivers at this link

  but windows can't see the bluetooth or wi - fi, the only way to connect with the ethernet cable.

  The Toshiba utility Wi - Fi Protected Setup (WPS) says that: the wifi card is disconnected.
  I enabled using FN + F8, but it won't change anything.

  Please help me.

  Hello

  Maybe a stupid at first but why question you didn t install recovery image original tat you got with your machine (Win7 Home Premium 64-bit). This recovery image contains all the necessary drivers, tools and utilities?

  Anyway, check it please state of the hardware in the Device Manager. Wireless network adapter is listed under network adapters?

  According to specification for laptop, your laptop has card-combo-WLAN so after WLAN driver you need to install the Bluetooth driver filter Package.

• Lost my bluetooth installations when I reinstalled windows

  Yesterday, I reinstalled Windows Vista and now my bluetooth has disappeared. When I tried to reinstall the drivers it keeps stuck and then I checked in my control panel and there it shows no bluetooth icon I had before.

  Can someone help me please?

  If you do not install SP2 still do.