RAID and disk 3 TB

Similar Questions

• What type of Raid and disk offline

  Hello world

  Thanks for reading this.

  I have a Dell Poweredge T6300 with a Perc H730.

  It has 8 drives 1 TB 7.2 k.

  It has a C drive and a D drive.

  Looking at the Server Manager / file C and D Storage Services seem to be Raids but I'm not sure what kind.  One of the disks in the set of 4 seems to be flashing orange offline.

  Server seems to work very well.

  Seems that I can't find a way to check the type of Raid without stopping and running Perc H730 map (CTRL + R) software.

  Is this true?
  I think I can hot swap according to the Type of Raid, and I believe that the hardware supports that.

  I was wondering if I think in the right direction.

  Thanks in advance.

  Hi DLOJ333,

  Did you mean you have a T630 instead of T6300 model?

  You can install Open Manage Server Administrator, who will monitor your condition storage and server real-time hardware. Just make sure that you check to install Storage Administrator. This may require a reboot of the server for the registry and the service is running.

  Additionally, make sure that you are running Windows Server.

  Here is the link, it's an ISO: http://dell.to/1ObcpO5

• R610 Perc 6 / i Can I have matrix Raid and independent labels?

  My R610 with a Perc 6 / I can take 6 physical disks.  I want to create a raid 1 with the first two discs, then install 3 drive more that BONES can see and use in a storage space.  However, I can't figure out how.

  I have my setting up a raid and windows installed and I have the other 3 drives inserted, but Windows does not see them.  Maybe that's not possible, but I wanted to ask if anyone else had any ideas on how to make this work.

  Thank you.

  PERC 6 is not compatible no RAID, so if you want to use these disks separately, you must configure each as a single drive RAID 0.

• Break the RAID and the displacement of the OS to a new hard drive

  Hello

  I have a MSI GT683r laptop that is configured with two 500 GB Hdd that are configured in RAID 0. I wanted to disable Raid so I could separate my windows OS of my alternative OS on two different hard drives. Im a student, so I have lots of important programs and documents on my PC right now and I was wondering how can I mirror/clone/transfer my exisitng OS (as part of the RAID 0 stripe) and move it to a single hard drive. There are some caveats to this and how to go to that topic.
  Thank you very much in advance

  RAID 0 distributes all your files on both drives. Break the RAID and you have data or programs, not even a bootable OS. So you have to backup your data before breaking the RAID.

  To preserve your current operating system and transfer it to one of your readers courses will require using a 3rd hard drive to clone the current operating system from before the breakup of the RAID, so that it can then be cloned to one of the original disks.

  It will not be possible if you store more data on RAID 0, that can be accommodated on a single disc. With your drives, if your current RAID 0 (maximum 1 to) has more than 500 GB stored, this cannot settle on one of your hard drives of 500 GB.

  Tricky

• Distribution of ASM and disk required

  If I use the external RAID 1, the minimum disks required are two. Now
  If I combine the DSO (interleaving) and external RAID 1 (mirroring only), how many records to a minimum is necessary to achieve the purpose of distribution of ASM + RAID 1 mirror writing? OR, another way, implement WITHOUT Raid on disks, instead, let the ASM mirror and strip, in this case, what are the minimum number of disks must be used?
  
  
  Thank you
  
  Scott

  If you want to mirror and scratch using asm, then you must use at least 4 disks.

  Check this: http://url4u.co/15FTGm

• ESXi 4.0 and disks. (read the last line of the short version).

  I have a HP DL185G5 - HP Smart Array P400 sata controller.

  I run ESXi 4.0 U1 - installed on a 2 GB Kingston datatraveller USB.

  I have 2 x 750 GB sATA drive raid 1 which I've used so far - and it worked fine.

  Now that I bought 4 x 750 sATA drive. Made a RAID 5 in the controller. When I started I did not see the disk in VMware vSphere.

  So I tried to destroy the raid 5 and to create 4 x raid 1 disk 0 in each. And now I can see and use them in VMware vSphere.

  So my question is, when I use a raid 5, they get a total of slightly over size of 2 TB.

  ESXi supports an amount of more than 2 TB for a logical drive?

  > ESXi supports an amount of more than 2 TB for a logical drive?

  # Maximum LUN size is 2 TB minus 512 b.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• DS3300 Design - RAID and logical drive configuration

  Hello

  I'm setting up a dual controller DS3300 with VMWare ESX 3.5 hosts x 2 connection using the iSCSI Software initiator.  I have a question about setting up the optimal training.  What I read I should set up several logical drives, and then assign each player owner of another favorite controller logic.  I have 12 300 GB drives, so I thought I would create a RAID5 11 with 1 spare drive Bay.  I would create logical units of 4 x size equal and each of the 4 controllers will then assign that traffic is spread in the controllers for optimal performance.

  A1 and B2 to go to a different physical switch (vlan) and B1, A2 go to another.  Each ESX Server has 2 vswitches each with a single network adapter with each going to a different physical switch.

  Can anyone tell if the RAID and the design logical drive is the best way to go for a flow optimal iSCSI?  I'm not asking about this type of raid to use - I don't need a raid 1/0 or a mixture of performance - I'm afraid only for best performance of iSCSI for RAID5.  Can I create several RAID5 arrays and logical drives or simply several logical drives?

  Thank you

  Ian

  If you have 2 controllers in your storage space then the best config (with 12 disks) must be set up 2 bays of R5 - each of them has its owner controller.

  Included logical readers will have the same owner under the parent array controller. Logical readers could be about 300-500 GB on the size. A big R5 isn't the best practice because of the likelihood of the failure of the double disc (for example during the time of reconstruction). A spare part is a must here.

  On Esx site I would keep everything simple - 2 network cards, a vmkernel iscsi port. More complexity you will get no more flow (with storage).

  Just for notice - DS3000 series gives quite more random ios on R10 in comparison to the R5.

• Dell PowerEdge 2900 RAID and drive down

  I have a Dell PowerEdge 2900 server. The primary transmission table has three drives and RAID 5. The system came this way, and it has been humming for quite a long time. Recently, one of the disks has deteriorated and the light on the drive flashes green and light amber. The light amber, I figured, it means that there is a problem with the drive and must be replaced. Then, I found a replacement on Amazon.com drive and installed (the drive is hot, but my cold started to be sure). I installed the drive, but keeps flashing green and amber light.

  I didn't know that I shouldn't have to replace the drive in this way, so I will now try to figure out what to do next. I hoped to reallocate the foreign disk so that I can use it, but my server always shows the reader, not having even if the new replacement drive is in the slot, now.

  I'm running PERC 5 / I integrated utility of Configuration Bios 1.04 - 019 a

  I started the server and you press CTRL-R. I've highlighted the controller and press the F2 key, what is operations. When the operations window opens, there are three menu items:

  Create new VD
  Zero Config reset
  Foreign config

  The only thing that I am allowed to do in this menu is to reset the configuration. I can't move my cursor upwards or downwards for one of the other choice of two menu.

  Scroll when the virtual disk and he discovers, it still shows the first two discs and a lack.

  When I press CTRL + N to display the next screen, I see a player listed as failed.

  How can I rebuild my RAID with this new drive? If I can't do it, what is the best way to remove the RAID and start over? If I delete the RAID and do it again (and if my replacement drive is indeed well), how can I make sure that my server not to see it, not having so that I can start using it?

  Alternating flashing green/orange means that the disc is in a status of predictive failure. What OS is running system? If you hotswap drive next failure they may possibly other issues table because the drive was online and participating in the table with errors on the disk. The adequate alternative method is to use our software Openmanage Server Administrator to run a consistency check on the table and then the drive offline. Once this has been done you can then swap the drive. It seems that in your case, that the new drive had bad data copied on it and it made a predictive failure as well. We want to do is run our hard drive diagnostics and test drives in the system.

  http://downloads.Dell.com/FOLDER01456532M/1/Dell-onlinediags-Win32-2.30.0.70.exe

  Install and run the GUI version in the start menu. In the left pane select the PERC 5 and then in the lower right pane select quick test and then to run tests.

• Warning of risk in raid 0 disk

  Hi all

  My system:

  Windows7 64 bit

  First CS4

  motherboard: X58A-UD3R

  CPU: Intel core I7 930

  6 GB OF RAM

  I got my new system. I leave the computer shop set up for me with Raid 0. "There is a warning in an application called"Intel Rapid storage technology"on one of the disks in the raid indicating:"disk at risk"and it has a yellow triangle warning sign. When I press the "reset to normal", once again it has the green checkmark, but after a while returns the warning. I got to the lab only to find out that they are not so professional. They have checked all disks, told me they were OK and that the warning did not appear again. When I get back the computer I discovered that I had to set up matrix Raid 0 again in the Intel app and after cela returned warning.

  Someone has encountered this problem before?

  I know it's more a computer problem, but there are knowledgeable people here, which can be experienced with raid, so I thought I would ask here.

  Thanks for any info you may have

  This means that disk fails on 1 or some Smart requests that Council sends to the player. This is one of the main features of the chip so

  It is still in its infancy.  This probably means that player will fail sooner rather than later. I would like to back up your data now and

  guarantee of the player.

  Eric

  ADK

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Disk Cleanup and Disk Defragmenter Hangs

  The DISK CLEANUP and DISK DEFRAGMENTER freezes when it COMPRESS OLD FILES

  Agreed - you must remove the option compress old files:

  Compress old files comes from the good old days, when hard drives were weak and slow, and he had to each byte, you can get on your hard drive for programs and things.  Today, thanks to modern technology, it is almost superfluous.

  If you want your cleaning disc to run faster, I would just remove the option compress old files on XP because it is known to crash or give the illusion of being hanged.  If you have 1 million files on your system, you'll wait a long time and your system may appear to be hung (maybe that's really).

  I really don't think that with the technology available today that compress old files is necessary.  It would have been slow you if XP needs unzip a file.  Besides, nobody seems to be able to tell me at what age an old file is in the XP terminology... what was simply a file become old?  I just remove this 'feature' and never see him again and my disk cleanup runs in a Flash, since it doesn't have to search for old files to compress (some old way).

  It is a 'problem' for some systems that Microsoft made an article on how to disable it (mine is disabled)

  http://support.Microsoft.com/kb/812248

• msmpeg2vdec.dll explorer.exe is originally to use all my RAM and disk i/o

  Hello

  When opening some folders (just by clicking on the file in a different folder is causing the problem too) that contain media files on my system it causes explorer.exe use all my RAM and max on my disk i/o.

  Process using explore and RamMap I see that msmpeg2vdec.dll on my system is causing explorer.exe use all my RAM and disk i/o.

  RamMap using I see the entire file 6 GB + is attempted to be loaded into memory to live. :(

  Full stack of the msmpeg2vdec.dll! Live ThreadedDecode wire then it tries to load the file into memory:

  Ntoskrnl.exe! KiSwapContext + 0x7a
  Ntoskrnl.exe! KiCommitThreadWait + 0x1d2
  Ntoskrnl.exe! KeWaitForSingleObject + 0x19f
  Ntoskrnl.exe! KiSuspendThread + 0 x 74
  Ntoskrnl.exe! KiDeliverApc + 0 x 211
  Ntoskrnl.exe! KiCommitThreadWait + 0x3dd
  Ntoskrnl.exe! KeWaitForMultipleObjects + 0 x 271
  Ntoskrnl.exe! ObpWaitForMultipleObjects + 0 x 294
  Ntoskrnl.exe! NtWaitForMultipleObjects + 0xe5
  Ntoskrnl.exe! KiSystemServiceCopyEnd + 0x13
  ntdll.dll. ZwWaitForMultipleObjects + 0xa
  KERNELBASE.dll! WaitForMultipleObjectsEx + 0xe8
  Kernel32.dll! WaitForMultipleObjects + 0xb0
  msmpeg2vdec.dll! CMFSampleList::WaitForMoreData + 0x2e
  msmpeg2vdec.dll! CH264DecoderSoftware::GetDataFromStream + 0xc2
  msmpeg2vdec.dll! CCoreH264Decoder::GetMoreData + 0x4d
  msmpeg2vdec.dll! GlobalGetMoreData + 0x13
  msmpeg2vdec.dll! getMoreData + 0x1e8
  msmpeg2vdec.dll! GetAnnexbNALUNoEncrypt + 0x33d
  msmpeg2vdec.dll! Parse_One_Slice_Nalu + 0xae
  msmpeg2vdec.dll! Parse_Nalu_Till_Meet_New_Pic + 0x5d
  msmpeg2vdec.dll! Task_PED + 0 x 184
  msmpeg2vdec.dll! StageExecute_PED + 0 x 91
  msmpeg2vdec.dll! TaskScheduler_FindAndExecuteTask + 0x12c
  msmpeg2vdec.dll! ThreadedDecode + 0 x 92
  Kernel32.dll! BaseThreadInitThunk + 0xd
  ntdll.dll. RtlUserThreadStart + 0x1d

  I know it's the msmpeg2vdec.dll! ThreadedDecode thread because if I hang just this thread into explorer.exe it stops the disk i/o and freezes at some current RAM usage, it should be. And if I kill the thread all my RAM is released.

  Oddly enough I can open the file just fine itself very well in an application and have no question also. Only when you try to display the file in the Explorer himself this problem occurs.

  Thanks for the help,

  Will be

  PS: Why does my mouse cursor disappeared when editing this post? Boring!

  It looks like the Explorer tent to generate preview thumbnails of the videos. You can try to disable the genration of the thumbnails in the options of Solution Explorer. Now, the Explorer shows only the icon.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• What are the files delete to free up my Media and Disk Cache?

  What are the files safely remove old projects to make my Media and Disk Cache? I use Photoshop and first, and when I installed After Effects, I got a message saying I needed free memory in this cache.

  Thank you!

  Hello

  Default location:

  Windows - "C:\Users\User_Name\AppData\Roaming\Adobe\Common".

  Macintosh - ' ~ / library/ApplicationSupport/Adobe/Common '

  Inside this place, you will find 2 files - 1. Media cache and Cache files for multimedia 2.

  If these two folders, trash, it will clear all the previous Cache.

  You can also do this in Premiere Pro, select Preferences/Media/Clean.

  

  Kind regards

  Navdeep Pandey

• AW17 R2, support Raid and Tweeking OC.

  Hi guys

  So, I had my R2 17 for about 1 month now, and I really miss support raid. because according to me, it's kind of waste that I have 4 x Crucial MX200 500 GB SSDs 2280 m2, in the laptop and I can't use them in raid.

  None of you don't know if it will come a bios update on this? and the option in the bios for OCing?

  A little *, dell has removed the option RAID and many other useful tips for this line Echo. When other computers laptops Alienware came with open bios.

  Thanks in advance

  Norway.

  Hello

  Unfortunately. We have not received any news on an update of the Bios that make this possible. Maybe it's an option that we will be able to add in the future for the Bios, but as of now nothing has been confirmed.

• RMAN backup to tape and disk script

  Hi all,
  
  I'm looking for a script to backup on tape and disk using an RMAN command. There is that one parameter, I don't want to understand, I've seen evidence of. Backup of the Flash recovery area. I want to be able to do it from the location of the files. I want to back up the database complete, kitchen sink and everything.
  
  Can anyone help?
  
  General information.
  
  Database 10 g 2, Grid Control 10.2.0.4, Linux RHEL4.6 Server. If you need more information please ask me.
  
  Thank you all!

  This can be by setting up your backup channels,

  Channel configuration

  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/rcmconfg.htm#i1006906