RAID controller perc 5 / i Raid 5 rebuid of security
Hello.
need help.
I have the raid 5 6-disc version. 136GB x 2 drives and 4 x 2 TB. (why? don't ask some black.)
RAID controller perc 5 / i
so a question is: can I discs remove 2 136 GB safety (without data loss) and rebuild the raid to work only with 4 drives of 2 TB and volume take all the space?
You cannot delete records from the table - the number of disks must remain the same (or you can add to it). You need backup/restore to make a smaller VD.
Tags: Dell Servers
Similar Questions
-
Battery on the Controller PERC 6 / i integrated Poweredge R900 and 2950.
Hi, we have this error below Poweredge R900 and Poweredge 2950 for 4 days now, I hope that he will be gone after 7 days (such as by Maximum learning delay)
Battery on the Controller PERC 6 / i integrated:
Name battery 0
Degraded state
Loan of State capacity
Learn the State duly
Next time learn 0 hours
Learn 7 days 0 hours maximum
Learn the Auto ModeIn case the error continues after 7 days, is there any solution to this? or replace the battery if error remains.
I had been searching for the right part No. battery so that we can order in advance, thank you for giving the battery part No. for Poweredge R900 and 2950 Controller PERC 6 / i integrated.
Thank you much in advance.
concerning
Rais info is stored on the discs should not be a problem
R900 page 84 support.dell.com/.../XK9460D.pdf
2950 page 74 support.dell.com/.../hom.pdf
-
Salve,
Questa mattina it Server Business era in crash, e anche he tentativo di fatto riavvio da is non ha UN dato esito positivo, it server no e riuscito a boot of it fare del operating system (Linux Suse Enterprise of 12). Quando sono love in azienda ho constatato tramite it del che RAID controller bios it disco 0 era stato con dall' fuori FOREIGN array. Lucetta period del disco verde. Ho lo stato del disco in the LOAN changed. My non sono riuscito ad avviare he rebuild perched mi no consent di questa operation rates. Ho tried anche a UN nuovo disco uguale cute, my if comporta como the altro delivery, operation di rebuild no e consentita.
Ho tried disco mettere anche it come Hot Spare, my operation no viene completata by an unknown error, it disco 0 compare nella lista degli relief, my non utilizzabile e.
Fermi Siamo, come posso procedere? Inoltre è speranza di poter centred senza dover reinstallare tutto?
Grazie
ING. Fausto Bolognesi
Buongiorno, qual'e lo stato degli altri dias?
-
controller perc su h310 dell t410 Server
Salve,
da UN client nostro è a dell t410 server with a perc h200
E' possibile auswechseln he con UN h310 h200 controller?
Ho letto some forum che ufficialmente e non supportato my a noi basta che funzioni, abbiamo un'esigenza di fare a con e raid5 the h200 is erro no non e possibile...
Grazie in pre-empted
Enrico
Buongiorno, h310 non Può montarla, I conntettori sono diversi.
Può UN H700 cute by raid of an air ticket 5.
Accessories.euro.Dell.com/.../ProductDetail.aspx
the batteria non e inclusa nel kit goes acqustata separaamente:
-
Mix HD Sas and Sata on the T410 with controller Perc H700 [CF]
We have a customer using a Sever T410 with Raid Perc H700 controller; We want to add more space to that the creation of a new virtual disk with the connector 1 (now does not).
Can we add 2 new Sata HD 2 TB of space on new Vdisk also during the first Vidsk is the use of Sas 10 K 300 GB HD?
We ha 2
Buongiorno,
Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could come message privato mandarmi it service tag of server?
-
Request preventivo per batteria Controller PERC 6 / i by PowerEdge 1950 Server
Buongiorno,
come da oggetto sono a take UN preventivo per sostituzione di una batteria per controller it PERC 6 / I integrated by a server PowerEdge1950 in quanto it software Dell di administration lo tell in stato FAULT, low voltage.
Speaking saluti.
Buongiorno,
the batteria Può acquistare online:
Accessories.euro.Dell.com/.../ProductDetail.aspx
Oppure take it supporto a pagamento tramite questo link:
Todas
Marco
-
Integrated battery Controller PERC H700 - failed status [CF]
Buongiorno,
avrei need di acquistare una nuova batteria come da oggetto.
He e UN Poweredge R610 Server
Service etiquette: 34LR65J
Express service code: 6808751335
Speaking Saluti
Buongiorno, the sto contattando by mail.
-
Battery on Controller PERC 6 / i integrated [CF]
The batery status failed.
Could you please tell me how to solve this problem?
Thanks in advance
Concerning
Buongiorno, the sto contattando by mail.
-
PowerEdge 1950 - Controller PERC 6 / i - has no Firmare update
Hello people,
I am trying to upgrade the firmware version 6.1.1 - 0047 to 6.3.3 - 0002.
The operating system is Windows Server 2008 R2 - Standard - x 64
But the following message was displayed:
The program cannot start or run due to incompatibility with 64-bit Windows versions.
I did download the correct version. (By support.dell.com, the version is supported)
You have an idea to solve this problem?
Thanks in advance,
I was wrong. Regret that Rafael...
These give a try.
FTP://ftp.Dell.com/FOLDER01002138M/1/SAS-RAID_Firmware_F96NR_WN32_6.3.3-0002_X00.exe
or
FTP://ftp.Dell.com/FOLDER01000364M/8/SAS_RAID_PERC6i-int_6.3.3-0002_A00_ZPE.exe
Also, which version is your OpenManage to?
-
PowerEdge R230 add RAID controller
Need advice: the goal is to add Dell PowerEdge RAID Controller H330 server Dell Poweredge R230.
Originally, the data connection is to the motherboard with a mini SAS connector, power cord is related to the Board of Directors itself as well go with a connector 6-pin. Given that the new RAID controller has a different SAS (SFF8644) mini connector, I can't use the original cable.
So try to solve that I bought 4 X SFF-8482 SAS a cable - Mini SAS SFF 8643. It would connect the RAID controller for readers. (THIS)
I also added a power cords: 4 Pin IDE power Molex 1 male to 3 x female Splitter & 2 x 4-pin Molex to 6-pin PCI-E adjust Power Supply Cable (THIS) and (THIS). It was supposed to feed readers - but is not and they won't turn on.
No idea why? Other ideas of ways to solve this problem?
Thank you
IB - EN11. initially, I understood the topology based on the information on the user manual, see the attached figure describing Cabling two 3.5-inch hard drives 'to the PERC card. Isn't this relevant?The information I had previously provided are based on the wiring of the Controller PERC H330 with basket 4 x 3.5 "which I assumed you had based on your notes. Thanks for your clarification and ignore these P/Ns. Here are the cables you need.
- Signal and cable LED to P/N 6R7VT the H330 controller to connect to the motherboard
- Cable SAS junction A H330 for 2 hard drives or optical drives, P/N TTN3V
- Hard/optical drive power cable from the system board P/N N9P7R for 4 HD (shipped with your server. Use only 2 connectors) or P/N VXR2 for 2 hard drives.
IB - EN1457CH, TWV59, 6R7VT: I can not find an any of them on the dell Web site, you can share links?I would recommend that you directly contact Dell sales in your area.
Thank you.
-
H730P of PERC in the reference numbers for cable R730XD RAID
We have R730xd several devices and have a query regarding the part number of the cable from the backplane before hard drive RAID Controller PERC H730P. In one of our servers, the cable has a number of FVPCF while in another server, it has a number of 8717G. The only difference I see is that the cable is a different color. We tried searching online but nothing appears untowards. The two cables are working without any problems or y at - it a specific part for a particular server number? Both servers have installed H730P PERC controllers.
Any help will be appreciated.
Hello.
The type of cable used is normally dependent on the configuration of the background and the controller. I see that two P/Ns FVPCF & 8717 G are identical and connect between the back 3.5 "- plan to the PERC H730P controller on the server 730XD." Each cable should work under the same configuration with no problems.
-
RAID Controller degraded by the Firmware version
Hi all
My security system is sending me alert because my RAID controllers being day. RAID controllers are fine, but the State is deteriorating because of the "latest Firmware Version available" which means I can't properly control if something really bad happens.
Is it possible to disable the alert or lower the minimum version expected? I just can't reboot all my servers just for an update of the RAID firmware.
My security system expects a status: Ok
Thank you very much in advance!
Greg
Below the output omreport:
omreport storage controller $
Controller PERC H700 integrated (Embedded)Controllers of
ID : 0
Status: No reviews
Name: PERC H700 integrated
Location ID: shipped
State: degraded
Firmware version: 12.10.1 - 0001
Latest Version of the Firmware available: 12.10.4 - 0001
Driver version: 00.00.06.14 - kh1
The minimum required driver version: not Applicable
The Storport driver version: not Applicable
Minimum required: Version of the Storport driver: not Applicable
Number of connectors: 2
Regeneration rate: 30%
BGI Rate : 30%
Consistency check rate: 30%
Rebuild rate: 30%
Alarm status: not applicable
Cluster mode: not Applicable
SCSI initiator ID: not Applicable
Cache memory size: 512 MB
Patrol read mode: manual
Patrol read status: stopped
Patrol read rate: 30%
Read the iterations of patrol: 2
Give up control of consistency error: disabled
Enable reversible hot spare and replace the: enabled
Load Balancing: not Applicable
Auto Member Replace on Predictive Failure: disabled
Redundant path view: not Applicable
Able CacheCade: Non Applicable
Persistent backup: disabled
Encryption Capable: Yes
Currently key encryption: No.
Encryption mode: no
Preserved cache: No.
Spin down drives unconfigured: disabled
Turn down hot spares: disabled
Centrifuge the configured drives: not Applicable
Automatic disk Power Saving (idle C): not ApplicableThanks again!
gcharotIs it possible to update the firmware without system reboot? I am running CentOS 5 and 6No, you can update the firmware without a reboot, but the update will be based in the controller cache until a reset is performed. So yes, you can perform the update without reboot, but it will not take effect until you perform a reboot.
Thank you
-
PERC 5i - RAID 5 with 3 drives shows 2 missing discs?
I have a PE2900 with a PERC 5i, the first volume is a RAID 5 with three disks. This morning the Controller PERC says two of the drives (MAXTOR SAS 68 GB 10 K rpm) are missing.
Is it normal to lose two discs at the same time accurate? Or would it be the controller going wrong?
Is there anyway to test these discs without breaking the virtual disk? Or am I out of luck of losing two of the three disks in a RAID 5?
Then on the VD MGMT screen, highlight the controller at the top left, F2, foreign Import.
He must move one of the stranger online and leave the other failed... things leave until you can confirm the operating system starts and is ok, then you can rebuild the remaining disk.
-
Reference Dell T610 PERC 6i - very slow RAID rebuild
Hi all, I have a DELL T610 with a Controller PERC 6i with 4 x 1 TB SAS 7.2 K disks configured as a RAID6. 1 of the drives has failed, I installed the new drive, but reconstruction is only 44% after 36hrs! Why is it so slow? Any ideas would be greatly accepted.
RAID 6 is well known for its performance of poor\slow. This is the only function is to be safer than RAID 5, not to be fast and cheap. With parity RAID, to rebuild the whole picture. They have been known to go for a week or more before they are finished, according to the size and speed of players.
Kind regards
-
PowerEdge T710 PERC H700 RAID level migration issue
In my new role, I inherited a number of servers managed until now by someone else. One of them is a PowerEdge T710 with a Controller PERC H700. There are two matrices; the other has four 3TO disks in a RAID-5 configuration.
I don't need the storage space any where near as much as the reliability factor. Is it possible to do a migration on-site from RAID 5 to RAID-6 without disturbing data? There is enough free space, and I have no problem losing a portion of the free space I have.
"Is it possible to do a migration on-site from RAID 5 to RAID-6 without disturbing data?"
Yes, BUT you can use this method by ADDING another disk. RAID 6 requires a minimum of 4 drives. Insert a disk "to hot', then in the software OpenManage (OMSA), go into storage, PERC, virtual disks and reconfigure in the drop-down list of tasks available for RAID 5.
"There is enough free space, and I have no problem losing a portion of the free space I have."
Apart from the fact that RAID 6 requires a minimum of 4 drives, even if you want to spend a 4 drive RAID 5 has a 4-drive RAID 6, it could NOT be done. You can't make a smaller table. The controller doesn't know - or care - on real data of BONE on the disks (so the amount of 'free space' is not serious) and is not worried about virtual disk space (which would be filled if the total capacity of the discs has been used).
Maybe you are looking for
-
Printing from an iPad Air to a HP 8600 Pro problem
I just bought an iPad Air and and I'm not able to print on my HP 8600 Pro. I have an iPhone 5 and able to print via the printer Pro for the iPhone. The free app Pro printer does not recognize the HP 8600. What should I do to be able to print from iPa
-
My ADVENT keeps showing an error message
When I press the power button it loads immediately in a black screen displaying these messages: "We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might cause this. If your computer stopp
-
I have a question about WINXP rules in the NAC server and more specifically, if a rule reports a failure, but it's part of a! the rule, this means - happening? For example: / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table No
-
BlackBerry Smartphone Sync Palm Treo 755 p with BlackBerry Storm
I was unable to sync my BB Storm with the data on my Palm Treo 755 p. I use the BB desktop software - the two devices are connected to the PC via the USB ports. I click on the device switch Wizard and follow the prompts. However, the screen with t
-
Conversion to Smartphones blackBerry ringtone
I'm trying to convert a portion of the ringtones that I did for my Motorola phone to my Blackberry Pearl 8130. When I try to get them to convert they will not convert. I do something wrong in the media 4.7 Manager?