controller perc su h310 dell t410 Server

Similar Questions

• Upgrade memory for Dell T410 Server

  Hi all!

  I have a Dell T410 server and want to update my RAM memory.

  I currently have 24GB RAM as follows:

  3 modules of 8GB RAM Dell certified - 2Rx4 LV of 1333 MHz RDIMMS

  I like to keep these modules and add extra. Don't know if I can add 8 GB, 16 GB, or 24 more.

  Hope you can help out me.

  Thanks in advance!

  If you have a processor you have only an available slot, so adding another 8 GB of memory would be the limit.

• ESXi 4 on Dell T410 Xeon E5504

  Hello:

  I ve installed VMWARE ESXi on a Dell T410 server. It has 1 quad core Intel Xeon Processor (e5504) but ESXi recognizes only the 2 hearts. I can only use two hearts in the virtual machine.

  

  I have a free license. Maybe a problem with the license? Could someone help me solve the problem?

  Thank you!

  I saw a setting in the BIOS to disable two of the kernel on a quad core processor, you can verify that?

• The Dell R710 server upgrade to R2 2012 Windows

  Question for the forum:

  I have a Dell R710 server.  There a PERC 6 / i RAID card in there.  There are discs 5 x 2 TB on the PERC 6 / I configured in RAID-5 right now with the 6th disc as a 480 GB SSD.   I currently own WINDOWS 2012 R2 installed.   Windows 2012 sees the TB 5 x 2 as a 7.27 TB HDD and the 480 GB SSD as a second hard drive.

  I heard the Windows 2012 R2 storage solution is best.  I want to convert the TB 5 x 2 hard drives just so R2 2012 Windows can control it.  I have the following questions:

  1. What do I have to go in PERC 6 / I controller and remove the RAID 5 and create a virtual disk for each 2 TB as a RAID-0 disk drive so that Windows can see each as separate hard drive?

  2. each of the 2 TB is a SATA II drive.  PERC 6 / I can only support up to 2 TB to 3 Gbps.  What is the best way to do it?  Can I upgrade to SATA III drives or 6 Gbps?  This server which will support at all?  I have

  3. If I install a SATA III controller in the PCIe slot, how can I plug SATA III drives to the card.  All drives are connected to the server to forward now.

  4 If a disk fails, Dell R710 will still flash light orange on the forehead to show what defective hard drives?  People still hot to swap the drive?

  5. Windows 2012 R2 will be able to tell what defective hard drives?  With 5 x 2 to for the storage and 480 GB put in place in the SSD for tiered storage, which is the best way to configure it for performance?  Simple volume or mirror?  How many drives can fail until Windows cannot recover from the failure?

  Please advise on the best way to convert more software raid WINDOWS 2012 R2.  Thanks for the help in advance!

  1. This is the only way to make available to Windows as separate disks, as the PERC 6 does not support the RAID/JBOD.

  2. the PERC 6 supports a maximum drive size of 2 TB. The material is limited to 3 Gbps. You can use 6 GB/s drives, but they will operate as discs 3 Gbps.

  3. you will need to connect a cable from the backplane to the new controller, instead of the 6 PERC. Backplane may not support 6 GB/s speed, if you plug a controller 6Gbps 6Gbps drives and they bind upward to 3 Gbps, that is why.

  4. Yes.

  5. Yes. How can fail depends on how you have set it up and how much data is there.

• Battery on the Controller PERC 6 / i integrated Poweredge R900 and 2950.

  Hi, we have this error below Poweredge R900 and Poweredge 2950 for 4 days now, I hope that he will be gone after 7 days (such as by Maximum learning delay)

  Battery on the Controller PERC 6 / i integrated:

  Name battery 0
  Degraded state
  Loan of State capacity
  Learn the State duly
  Next time learn 0 hours
  Learn 7 days 0 hours maximum
  Learn the Auto Mode

  In case the error continues after 7 days, is there any solution to this? or replace the battery if error remains.

  I had been searching for the right part No. battery so that we can order in advance, thank you for giving the battery part No. for Poweredge R900 and 2950 Controller PERC 6 / i integrated.

  Thank you much in advance.

  concerning

  Rais info is stored on the discs should not be a problem

  R900 page 84 support.dell.com/.../XK9460D.pdf

  2950 page 74 support.dell.com/.../hom.pdf

• RAID controller perc 5 / i Raid 5 rebuid of security

  Hello.

  need help.

  I have the raid 5 6-disc version. 136GB x 2 drives and 4 x 2 TB. (why? don't ask some black.)

  RAID controller perc 5 / i

  so a question is: can I discs remove 2 136 GB safety (without data loss) and rebuild the raid to work only with 4 drives of 2 TB and volume take all the space?

  You cannot delete records from the table - the number of disks must remain the same (or you can add to it). You need backup/restore to make a smaller VD.

• ESXi on a DELL R610 Server

  Hello

  being a newbie on VMWARE ESXi 4, I use the software on a DELL R610 server with 1 INTEL XEON X 5650 processor and 24 GB of RAM (6 x 4 GB).

  This system 4 servers and 4 offices is hosted.

  To improve performance, I want to add more memory 36 GB (3 x 4 + 3 x 8) and I think a second Xeon processor.

  A second processor usage is possible with ESXi 4?

  Web search gave me a confused littlle bit, due to contradictory answers :-(.

  Best regards from the Germany and thank you for useful answers

  Torsten

  On the RAM that you want to add, please make sure you read http://kb.vmware.com/kb/1018754

  André

• Dell OpenManage Server Administrator 6.0.3 and ESXi 4

  I try to install Dell OpenManage Server Administrator version 6.0.3. I managed to install this sub ESXi 3.5 update 4. It says in the instructions activate OEM CIM providers by setting Misc.CimOemProvidersEnabled to 1. Misc.CimOemProvidersEnabled is supposed to be located under various advanced however, ESXi 4 is not. Anyone know where the moved the option or y at - it a new way to activate this feature with ESXi 4?

  You do not install agents on ESXi directly, they will come in the injected code of VMware/Dell as a variant of ESXi.  Indeed they are not installable on ESXi end-user.  HP already has similar variant for ESXi 3.5.  But to my knowledge, no hardware vendor has ESXi 4 variants yet out.

• ESX 4 and IPMI / Dell OpenManage Server Administrator

  Does anyone else use the Dell OpenManage Server Administrator software on their ESX host?

  I do a cleaning/new ESX 4 installation on a Dell PowerEdge R900 server.  I installed the OMSA without error, but when you try to start the service, you get a "driver ipmi departure: "message. "  The web interface is running, but he tells no hardware information.

  She acts as IPMI is not installed at all, but shows an RPM query:

  VMware-ESX-drivers-IPMI-IPMI-msghandler-400.39.1vmw-1.0.4.164009
  VMware-ESX-drivers-IPMI-IPMI-si-DRV-400.39.1vmw-1.0.4.164009
  VMware-ESX-drivers-IPMI-IPMI-devintf-400.39.1vmw-1.0.4.164009

  srvadmin-ipmi - 5.5.0 - 364.DUP (appears after you run the install OMSA)

  I tried to install using the srvadmin script OpenIPMI - openipmi.sh and get:

  Status: OpenIPMI driver Module is not loaded in the kernel.
  Recommended action: If OpenIPMI modules are available on the system.
  Run "modprobe' command to add the kernel modules.

  I looked in ' / lib/modules/2.6.18-128.ESX/kernel/drivers/ ' for a modprobe IPMI driver, but can't find.

  ANBODY have any ideas on where to go from here?

  We have confirmed with Dell a few months previously, 6.0.3 required for ESX 4 classic, due out within 30 days of the release of GA of ESX 4 classic.  So I'd wait for 6.0.3 unless it is already available.  Dell said that they expected to be interrupted as soon as GA.

• Mix HD Sas and Sata on the T410 with controller Perc H700 [CF]

  We have a customer using a Sever T410 with Raid Perc H700 controller; We want to add more space to that the creation of a new virtual disk with the connector 1 (now does not).

  Can we add 2 new Sata HD 2 TB of space on new Vdisk also during the first Vidsk is the use of Sas 10 K 300 GB HD?

  We ha 2

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could come message privato mandarmi it service tag of server?

• Request preventivo per batteria Controller PERC 6 / i by PowerEdge 1950 Server

  Buongiorno,

  come da oggetto sono a take UN preventivo per sostituzione di una batteria per controller it PERC 6 / I integrated by a server PowerEdge1950 in quanto it software Dell di administration lo tell in stato FAULT, low voltage.

  Speaking saluti.

  Buongiorno,

  the batteria Può acquistare online:

  Accessories.euro.Dell.com/.../ProductDetail.aspx

  Oppure take it supporto a pagamento tramite questo link:

  www1.euro.Dell.com/.../SS

  Todas

  Marco

• PERC H700 driver during Windows Server 2012 r2 - disk Raid not recognized not

  Hello

  I try to install a r2 Windows Server 2012 to a Poweredge R710 with a Raid Perc H700. 2 HDD in Raid 1, but the HARD drive is not rcognized Italian Installation even if I try to use the 2008 r2 for the Perc Raid driver. They are listed, but if I select one disk HARD are not visible. What should do?

  Best regards...

  Grolle,

  Leave in the Raid Controller, what is the status of the table? In addition, was the raid 1 initialized after being created? If this isn't the case, then, who will have to be done before you try to install.

  If you download this and start on the lifecycle controller (F10) and then select deploy BONES, load these files there and proceed with the installation of the OS.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=M5VGR&FILEID=3325059394&osCode=MWS80&ProductCode=PowerEdge-R710&LanguageCode=en&CategoryID=DD

  I would like to know how will install it.

• Problemi nel rebuild di a raid 5 Array knew PowerEdge 2900 con controller Perc 6 / i [CF]

  Salve,

  Questa mattina it Server Business era in crash, e anche he tentativo di fatto riavvio da is non ha UN dato esito positivo, it server no e riuscito a boot of it fare del operating system (Linux Suse Enterprise of 12). Quando sono love in azienda ho constatato tramite it del che RAID controller bios it disco 0 era stato con dall' fuori FOREIGN array. Lucetta period del disco verde. Ho lo stato del disco in the LOAN changed. My non sono riuscito ad avviare he rebuild perched mi no consent di questa operation rates. Ho tried anche a UN nuovo disco uguale cute, my if comporta como the altro delivery, operation di rebuild no e consentita.

  Ho tried disco mettere anche it come Hot Spare, my operation no viene completata by an unknown error, it disco 0 compare nella lista degli relief, my non utilizzabile e.

  Fermi Siamo, come posso procedere? Inoltre è speranza di poter centred senza dover reinstallare tutto?

  Grazie

  ING. Fausto Bolognesi

  Buongiorno, qual'e lo stato degli altri dias?

• Reference Dell R310 Server Blade not start CD ROM [FRESH WINDOWS SETUP]

  Hello

  I have a Server Blade Dell R310. I created the virtual disk on a Raid Configuration, also I updated the BIOS boot.

  I PERC S100 when I checked on my configuration tab.

  The scenario is that I want to install a new / new copy of Windows 2008 R2 on this server, I have the dvd bootable. but when I put it on the drive it says "No Bootable Media found" something like that.

  Y at - it all the configurations that I missed? hoping to get answers from here.

  Kind regards!

  OK, let's back up a bit:

  Use the management tools of systems and Documentation (GDPS) instead of SBUU.  If you use SBUU with 2008R2, you should use the Driver Pack too... MUCH easier to use the GDPS, which has everything you need in there:

  FTP (you will need to copy/paste - forums do not like the FTP links):

  FTP://FTP.Dell.com/secure/FOLDER01538030M/1/OM_SMTD_730_A00.ISO

  Yes, you start on GDPS, follow the instructions, and then insert the 2008R2 media when prompted.

• Try installing ubantu OS on Dell R220 server - unable to launch the RAID configuration wizard

  I ubantu 14.04.3 Server OS on a DVD disc that is inserted in the R220 Dell server. I am trying to install the OS, but it does nothing when I go through the OS deployment. Server just restarts and crosses the start pages.

  In addition,

  (1) should I RAID to install this OS?

  (2) if so, how to install the RAID controller? It says 'Cannot launch the wizard of Configuration RAID' when I go to set it up.  I have SAS - RAID_Driver_H9W18_WN32_6.802.19.0_A05 on a usb key connected to the server, but I can't understand how to install it.

  Thanks for any help.

  Check the page of the inventory of the material in the lifecycle controller.