RALink Bluetooth PCle
My bluetooth is not working.in when I go to the control panel in my pc there is a yellow triangle with an exclamation mark.n black when I trouble shoot my pc it say my bluetooth PCle ralink driver has a problem
Hi Justvusi,
Thank you for your request, I will try to help you to the best of my ability.
I understand that your Bluetooth is not working. As you do not provide me the exact model of your computer and the operating system you are using, I can't check your drivers. However, here is a link to the HP drivers & downloads. I suggest that you are looking for an updated driver. You can run HP Support Assistant to help with updates and solve problems. If this did not solve it, I suggest you open Device Manager, right-click on the Bluetooth and uninstall. Now search for the hardware changes, it should install the correct driver for it.
If you need more assistance, can you give us your exact model and the operating system you are using. How can I find my model number or product number?
Tags: Notebooks
Similar Questions
-
RALink bluetoth PCle adapter does not work
I have a serious problem with my PCle of Ralink bluetooth adapter
The device status says Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39){Unable to load device driver}
HS device driver could not be loaded.
Error status is 0 x %xHello:
Several forum members have reported success with this bluetooth adapter by installing the latest version of the driver BT directly from Mediatek (Ralink).
Bluetooth Driver (RT3290/MT7630) 25/06/2014 V11.0.754.0 Win7 Win8 Win8.1 -
RALink Bluetooth driver for windows 8.1
Dear concern,
I have HP Pavilion G6 model 2312ax. I just upgraded my windows 8 8.1 the store Windows.
After improvement, the bluetooth software does not work.
Please design software for windows 8.1 or tell me the link to download the software.
Dear friends,
I also faced the problem with bluetooth after upgrading my hp laptop windows 8.1 450.
And support hp customer was also unable to pro-life me a resolution. they were blaming me, the laptop model is too old and cannot support windows 8.1... bla blaa blaa...
And finally a lot of googling and surfing, I found the solution.
Got the windows driver 8.1 to bluetooth from the link below.
Now, the bluetooth works perfectly fine on my laptop.
I hope that this will help people, too.
Try this file.
I think THAT this DRIVER WILL WORK ON ALL THE HP LAPTOP(which have a ralink bluetooth hardware) AS CE IS OF RALINK
http://S3.amazonaws.com/MTK.CFS/downloads/Windows/Mediatek_BT_V11.0.754.0_WHQL.rar
-
PCIe of Ralink Bluetooth driver adapter is not load? (error code 39)
Hello!
This is my first time on these forums, so please forgive me if I posted in the wrong place or repeat a problem solved. Please feel free to correct me if I am if I can learn!
So my problem is that my bluetooth no longer works, it does not appear under settings when I want to add/detect a device. In Device Manager, "Bluetooth Device" is displayed after I set Device Manager to 'show hidden devices' and as soon as I did that is the only thing under 'Ralink Bluetooth adapter PCIe' Bluetooth device that has a yellow exclamation sign in the logo.
When I go into properties, the "device status" shows this message:
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
{Unable to load device driver}
HS device driver could not be loaded.
Error status is 0 x %xAt first I thought that the driver is not compatible with Windows 8.1 because I think that Bluetooth no longer works after update to 8.1 but I'm not completely sure, other people have had this problem, but their solutions have not worked for me (so to come on this very forum). Now, however, I think that the Ralink bluetooth driver is not correct as to the internet from my PC resources page title only bluetooth driver is the Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS Driver for Microsoft Windows.
But, when you try to download and install this driver by running the "sp65069.exe" setup file I get a message saying
"The device may not be present or could have been ejected/disconnected from the system.
Insert or reinsert now. »
How can I solve this problem and finally get Bluetooth back to normal?
Thank you in advance for just reading this small trial!
Hello:
You must install the bluetooth driver and software for the model of wireless card uses your laptop.
So, if you indeed have a Ralink WiFi card, you must have a Ralink Bluetooth radio because it's on the same card as the chip wireless.
Tried to install a driver Atheros Bluetooth does not work.
I can't help you much unless you provide the number of full model of your laptop.
If it is more than two years, are probably no W8.1 drivers for Ralink bluetooth radio.
If you have a recent model, you can try the latest driver of BT and the software directly from Mediatek (Ralink).
Bluetooth Driver (RT3290/MT7630)
25/06/2014 V11.0.754.0 Win7 Win8 Win8.1 -
HP Pavilion 17 laptop
There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled.
OT: Driver help
Name: PCIe Ralink Bluetooth adapter Error code: 39 Hello
Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.
What is the number of full model of the laptop?
39 error code means Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. To resolve the problem, you will need to uninstall and reinstall the drivers for Ralink Bluetooth PCIe card on the manufacturer's Web site.
I hope this helps. Let us know if you have other problems with Windows in the future.
-
RALink Bluetooth PCIe Adapter has a driver problem Windows 8.1 - code 39
RALink Bluetooth PCIe Adapter has a bus PCI driver 2 problem. device 0. function 1 Windows cannot load the driver for this hardware device. the driver may be corrupted or missing (code 39)
Unable to load device driver}
HS device driver could not be loaded.
Error status is 0 x %xHP ENVY desktop PC 700-050
Serial number: MXX32503WL
Product number: H5P83AAHello
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). There are many causes of Code 39 errors:
- A required device driver is missing.
- A required binary file is corrupted.
- There is a problem with the file I/O process.
- A driver that refers to an entry point in another binary file cannot load.
Follow the steps under Code 39 of this Microsoft article:
Error codes in the Device Manager in Windows
http://support.Microsoft.com/kb/310123/en-us
Uninstall and reinstall the network driver to recreate a link from this link:
I hope this helps. If you need help with Windows, let us know and will be happy to help you.
-
G6 - 2284ca ralink bluetooth driver missing for Windows 8.1
I had just set my bluetooth problem, I entered the last month:
But then when I've upgraded to 8.1 Windows (64-bit), I lost my driver bluetooth again! Dang!
I tried all the Windows drivers 8.1 for g6 - 2284ca under networking, but they do not work and rewards me with a BSOD for my troubles.
I even tried the drivers of this thread:
No dice.
I uninstalled the device in Device Manager and scanned for changes, but the device still appears under other devices and appears with an exclamation point and the 'Ralink_RT3290_Bluetooth_01 '.
Support has been fantastic in the past and I thank you. I hope that you all will be able to help me get my bluetooth operational back again!
Hello:
See if these drivers of BT and wireless work. They have just released a couple of weeks.
-
Ralink Bluetooth sp61287 hangs on 4341sa running Windows 8.1
I have a HP DM4341sa netbook. The bluetooth drivers available on the HP site for this purpose are:
sp61287_RalinkBluetooth
Bluetooth sp59632_Ralink
both of these work on Windows 8, but if I update to 8.1 so that they stop working. is there a specific Windows 8.1 latest driver for this card? What is the model number for the adapter? Maybe I can find a driver also.
see you soon
damole
Hello:
Here is the link to the latest version of the driver Ralink BT and software for W8.1:
-
Pcie Ralink bluetooth adapter does not
Bluetooth does not work
laptop HP pavilion g6
product non - C9L65PA #ACJ
Serial No.personal information)
Processor Intel Core i3 - 3110M CPU @ 2.40 GHz, 2400 Mhz, 2 Lossnay, 4 logical processors
Windows 8
Windows cannot load the driver for this hardware device.
The driver may be corrupted or missing. (Code 39)
{Unable to load device driver}
HS device driver could not be loaded.
Error status is 0 x %x
Help, please
Hello:
See if the driver directly from Mediatek (Ralink) works.
Bluetooth Driver (RT3290/MT7630)
25/06/2014 V11.0.754.0 Win7 Win8 Win8.1 -
3.o Ralink bluetooth drivers works only on windows 8
My bluetooth motorola 3.0 does not work in windows 8, it was installed in my laptop TX hp2018. I tried all the drivers available, but they did not work in compatibility mode for windows 7 also. Windows community demonstrated that it is compatible with windows 8.
Hi Ashutosh,
HP has not released drivers Ralink Motorola Bluetooth 3.0 for Windows8. According to HP, you will need to wait until Windows 8 compatible drivers for Ralink Motorola Bluetooth 3.0 are available.
You can check the link HP forums at the address below for reference: http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking-e-g-Windows-8/Ralink-Motorola-Bluetooth-3-0-HS-Driver-not-compatible-with/td-p/2157795
As a work around you, try to follow the advice given by Sankara SubramanianGiri published on May 12.2013. Consult the following link:
It will be useful.
-
Relocation of Ralink bluetooth.
Hello
I recently downloaded and installed the bluetooth drivers and and, in the process, I accidentally deleted the bluetooth pre-installed on my pc (product name: laptop HP Pavilion 2200si g6). I would like you help me reinstall the bluetooth again.
Hi Pacioli1,
I ran the HP Support Assistant. Here is a link to install the HP Support Assistant software if necessary. It will install everything that was originally installed on the laptop. I would first of all uninstall the Bluetooth Device Manager drivers.
You can also try to do a System Restore before you uninstall the device.
I hope this helps.
Thank you.
-
Could someone help me to find drivers for these devices:
device: PCI SIMPLE COMMUNICATIONS CONTROLLER
hardware ID:PCI\VEN_8086 & DEV_9C3A & SUBSYS_2211103C & REV_04
PCI\VEN_8086 & DEV_9C3A & SUBSYS_2211103C
PCI\VEN_8086 & DEV_9C3A & CC_078000
PCI\VEN_8086 & DEV_9C3A & CC_0780device: RALINK_RT3290_BLUETOOTH_01
hardware ID:
USB\VID_148F & PID_3298 & REV_0000
USB\VID_148F & PID_3298Operating system: Windows 7 (64-bit)
Product name: HP PC laptop 15-r006tu.
You are the very welcome.
The driver that I posted must have worked...
Here is the list of ID's hardware supported by the driver as shown in the file of configuration HECI... information it is present for 32 and 64-bit operating systems.
[SourceDisksFiles.x86]
TeeDriver.sys=1,.\x86
HECI.sys=1,.\x86
wdfcoinstaller01011.dll=1,.\x86
1 3f3ca95b-3978-4168-b47b-5444f42d6c89.devicemetadata-ms=, A package of metadata for EN - Win8 file
1 46a6fdbe-c823-4579-bab6-35f67e01f793.devicemetadata-ms=, A package of metadata for EN - Win7 file[SourceDisksFiles.amd64]
TeeDriverx64.sys=1,.\x64
HECIx64.sys=1,.\x64
wdfcoinstaller01011.dll=1,.\x64
1 3f3ca95b-3978-4168-b47b-5444f42d6c89.devicemetadata-ms=, A package of metadata for EN - Win8 file
1 46a6fdbe-c823-4579-bab6-35f67e01f793.devicemetadata-ms=, A package of metadata for EN - Win7 file; - Manufacturer and models Sections.
[Manufacturer]
% MfgName % = Intel, NTx86.6.1, NTamd64.6.1, NTx86.5.1, NTamd64.5.1[Intel.NTx86.6.1]
; DisplayName Section DeviceId
% TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_1E3A
% TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_1CBA
% TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_1C3A
% TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_1DBA
% TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_1D3A
% TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_8C3A
% TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_9C3A[Intel.ntamd64.6.1]
; DisplayName Section DeviceId
% TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1E3A
% TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1CBA
% TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1C3A
% TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1DBA
% TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1D3A
% TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_8C3A
% TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_9C3ATry to manually install the driver as follows.
Run the driver again if you deleted the file since the swsetup folder.
Go to Device Manager and click on the controller Comms Simple PCI who need a driver.
Click the driver tab. Click on set to update driver. Select travel it my computer for software driver and find the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp63510.
Make sure that the include subfolders is selected and see if the pilot goes like this.
-
I can not activate bluetooth. It does not exist in the Device Manager and there is no such thing as the ability to switch the bluetooth market under settings. I have tried convenience store running in hardware and devices and received the message: "Ralink bluetooth PCle adapter has a problem" and the question isn't resolved. Any ideas on how to proceed by appreciated
Hello:
The only suggestion I can offer would be to try to update the driver...
I think this is the most recent to W8.
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1#tab1
-
Bluetooth PCIe for Windows 8.1 Ralink (Mediatek) missing adapter driver
Where can I get a working 8.1 Windows device driver 64 bit for
Adapter Ralink Bluetooth PCIe?Device ID: PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
HP TouchSmart PC ENVY 15-j003sg laptop
Product number: D9V73EAhttp://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=de&DLC=en&sw_lang=&product=5389... has no entry for "Ralink Bluetooth PCIe Adapter.
sp64156 Windows 8.0 is not installable on Windows 8.1
Bluetooth of Ralink software driver
Exit the: 2013-11-01
VERSION: 1.00 C Rev.
http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64156.exeIt gives the error message:
1309.error error reading file: C:\SWSetup\sp64156\Win7\AMD64\program files\Ralink Corporation\Ralink Bluetooth Stack\driver\m76usb\devcon64.exe.
3 system error. Check that the file exists and that you can access.Earlier versions of this driver for example C:\SWSetup\Drivers\RaBtooth crash the system with
SYSTEM_THREAD_EXCEPTION_NOT_HANDLEDThank you
Mike
The drivers page for TouchSmart HP ENVY 15-j003sg (number of product D9V73EA #ABD) on Windows 64 - bit 8.1 now lists Mediatek Bluetooth software driver 2013-12-21, Version 11.0.748.2 that points to sp64949.exe for the download.
I also found sp64949.html and it shows a list of other templates / languages that supports this SoftPaq.
I am pleased to announce that the installation went well and I'm now running with this version. Installation is required a reboot and I had also re-pair my Bluetooth mouse after installing. So now, all right and I'm under the version that was officially released for my computer model laptop and Windows 8.1.
Mike
-
Help with Ralink driver bluetooth
Does anyone know how to solve the error 9996 for ralink drivers?
My computer is a HP ENVY Phoenix 800 (Energy Star) - 8.1 of Windows OS.
I have not tried using bluetooth before I upgraded my computer to WIndows 8.1.
I tried to download sp64209.exe but the same error still appears.
Ralink Bluetooth adapter driver
Your system does not meet the minimum requirements for this update.
Update has been canceled. (9996)
Also when I troubleshoot for hardware and devices, he said
Problem found
Hardware changes might not have been detected. Detected
Thanks in advance
Hello:
Now that you have downloaded the driver, please try this...
Go to Device Manager and click on the network controller needing drivers. Click on update driver driver.
Select travel it my computer for software driver and find the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp64209.
Make sure that the include subfolders is selected and see if the pilot goes like this.
If this is not the case, see if this driver installs.
Maybe you are looking for
-
Satellite A500 Toshiba product recovery using error
I recently ordered a Toshiba product recovery for my Toshiba Satellite A500, which runs on windows 7. When you use the product recovery DVDs fine, but towards the end I get an error message. And now I can not even boot my pc, he repeats to me "BOOT M
-
Recovery error / ERROR: 10 d - FA13 - 045
Hello I tried to format my laptop using recovery Toshiba--> Toshiba Recovery Wizard media--> it woks for awhile then I get this error in recovery... "ERROR: 10-FA13 - 045D.Please can someone help?Thanks in any case.
-
Get the phone as it was before I unlocked, possible?
I guess Motorola unlocking is similar to Knox of Samsung, which cannot be reset. But again I ask you, is it possible for me to get my phone to the way it was before I unlocked the bootloader? I know how to lock the bootloader again which is great get
-
My iPhone that does not load Plus 6 after upgrading iOS 9.2
Hi guys. I have a problem as the title. My iPhone that more than 6 can not load after update iOS 9.2. It works perfectly before. Is that what someone has experienced similar problem? How can I solve this problem? Thank you Doskey
-
Scattergraph annotation shape size
How can I set the Shape.Size Annotation of the ScatterGraph with a scale of XAxis. Exsample: if I have the XAxis with a scal YAxis with scale 0-10 and 0-1000 and I want the form to 0-500 I can not put the Shape.Size (500,10)? TNK