RAM reserved for first

Similar Questions

• Is it possible to access more than 2.5 GB of ram for first with my current setup?

  Hello

  I'm on Win 7 64 bit and I have 4 GB of Ram. In CS5, it indicates that 2.5 will be dedicated to the creation and 1.5 will be spent on other programs. When I try to change the amount of Ram (increasing the amount of first/lower the amount other programs), it does nothing.

  Is it possible to access more than 2.5 GB of ram for first with my current setup?

  Thank you

  Taking the memory of other software means carrying the memory of things such as the operating system. You really, really want to go too low with that. It would also cause your applications to fight for RAM, causing the contents of the RAM be exchanged on the hard disk, which is one of the worst things possible to do to your performance.

  If you want more RAM available for Premiere Pro, and then install more RAM.

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• "Setup is preparing your computer for first use" loop problem

  Hello, I was hoping you guys could help out me with a big problem, I ran across when trying to install Windows 7 on a desktop computer new, custom - build. I managed to successfully install my Windows 7 64-bit, it appeared, but when I try to run it, that I will meet a black screen that says "Setup is preparing your computer for first use" and it will stay there forever, I would say. I let it run all night and didn't go anywhere.

  I tried to start in safe mode, and Windows was loading files sys32, he got to "Classpnp.sys" and it froze. After a few minutes, the screen is blacked out, and I got fired the familiar screen "Setup is preparing your computer for first use.

  I bought the copy of Windows 7 nine FRY, there will be no problem with that. My HD is a (new) 240 GB PNY Optima SSD, my mobo is a (new) Z97X-SLI Gigabyte, and I have 16 GB of RAM. All these things have been recognized by my BIOS, it seems that everything is properly connected.

  I tried to install Windows 7 on a second time and exactly the same thing happened. I also tried to repair the installation to start upward, but he finds no problems. Also a check of the memory and the disk has verified without any problem. The only things I plugged are my monitor, keyboard, and mouse.

  Does anyone know of a workaround for this screen loop "first use"? Any help would be greatly appreciated.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are Overclocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.

  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory

  sticks are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/

  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)

  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your hard drive

  Intel® drive SSD Toolbox

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:

  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:

  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  Support PNY: http://www.PNY.com/support/contact-us

  Samsung: http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/about/whitepaper07.html

  Samsung Magican review:

  http://www.TweakTown.com/articles/5638/Samsung-magician-4-2-first-look-new-SSD-Toolkit-adds-rapid-mode/index.html

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  = Is installed after Windows =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?

  Check their support site for the latest drivers as the CD that came with the computer

  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:

  Download and install the most recent Windows 7 or 8 drivers for your card.

  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx

  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos

  or equivalent ATI.

  Prime 95:

  http://www.Mersenne.org/freesoft/

  It's a stand alone .exe file contained in an archive .zip.

  Simply choose to run the 'stress test' option for 8 hours or more.

  If your PC can pass this test, your memory and CPU

  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:

  The temperature of each core of the processor.

  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect

  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.

  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.cpuid.com/cpuz.php

  Watch the clock speed of the CPU under various conditions of loading

  (when using speed step technology Intel EIST).

  #1 Note:

  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory

  and the "SPD" tab shows the nominal speeds for each memory location that is filled.

  #2 Note:

  Compare the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.

  voltages, temperatures, fans speed.

  http://www.CPUID.com/HWMonitor.php

  Speccy:

  Advanced for your PC system information tool.

  Need to know what's inside your computer?

  No problem! Speccy will give you all the information you need.

  Note: May or may not show the motherboard manufacturing.

  Overview: https://www.piriform.com/speccy

  Free version: https://www.piriform.com/speccy/download

  Test of Stress of FurMark GPU (graphics card):

  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/

  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:

  Provides information of the car and has an option (tab scan error) to test your drive.

  http://www.hdtune.com/

  CrystalDiskInfo:

  http://CrystalMark.info/software/index-e.html

  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/

  Monitors the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:

  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.

  It displays your drives model number and compares your drive with other discs of the same brand and model.

  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.

  http://www.almico.com/SpeedFan.php

  GPU - Z:

  A utility light, designed for you give information about your video card and GPU.

  http://www.techpowerup.com/GPUZ/

  PC WIZARD:

  A powerful utility designed especially for detection of hardware, also analyses more.

  He is able to identify a large scale of system components and supports the latest technologies

  and standards.

  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Windows 7 install hangs at "Setup is preparing your computer for first use.

  I'm trying to install Windows 7 Ultimate 32 bit on a Giada N20 via USB.  The specifications of the computer are:

  Intel Atom D252
  NM10 Express Chipset
  2 GB of Ram
  HARD DRIVE 320
  NVIDIA ION graphics processor

  I seem stuck at "Setup is preparing your computer for first use.  It stays on the screen for about 8 minutes, goes to a white screen for about 5 minutes and then returned to the screen "Setup is preparing your computer for first use.  The nettop does not have a CD-ROM drive, and I have currently not an external USB drive is my only option right now. I tried the USB stick on another computer, and he moved very well.  I try to avoid having to buy an external rom just to try it, but I guess that will be my next step.

  Someone at - it suggestions on what I should try next?

  Hello

  Are you able to boor in safe mode?

  It is possible that one of the devices of external hardware or internal interferes with the installation process.

  Try the following steps:
  a. first of all unplug external devices attached to the computer except the mouse and external keyboard.
  b. restart the computer and start the installation of Windows 7.
  c. press SHIFT + F10 to open the command prompt.
  d. type devmgmt.msc in the command prompt and press to enter.
  e. in Device Manager, disable all unnecessary devices and then try to continue the installation.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• FRM - 40603:Records is no longer reserved for the update. Query for changes

  Hi I have a form that has been developing 6i and upgraded to 11g form work well in 6i, but when I try to do the same function in 11g get this error

  FRM - 40603:Records is no longer reserved for the update. Query for changes
  When I commit this execute_query (for_update); It is the form to clear values when it loads, the error comes when I try to delete

  How can I do this

  Action: If you want to change the block, you will need to re - interview.

  

  I use When-Timer-Expired (WTE) trigger

  You have a 'relationship' defined between the blocks of your master and detail? If so, simply update your master block and the block of details will automatically be re-interviewed. If you cannot use a relationship, then you can use can create a timer in the trigger that updates the database, then in the trigger When-Timer-Expired (WTE) you can go to the retail block and run a query. For example: / * the sample on change trigger * /.

  DECLARE
    timer_id  TIMER;
  BEGIN
  ....your code here that performs the update....
    /* Now create an instance of a timer */
    timer_id := Create_Timer ('upd_detail',1,NO_REPEAT);
  END;/* Sample Form Level When-Timer-Expired trigger */
  DECLARE
    timer_id  TIMER;
  BEGIN
    -- Find the timer first
    timer_id := FIND_TIMER('upd_detail');
    IF NOT ID_NULL(timer_id) THEN
        GO_BLOCK('DETAIL_BLOCK');
        Execute_Query;
    END IF;
  END;
  

• Thumbnails that use RAM in the first (2015.3)

  Hi, we had a problem with first (2015.3) using the RAM on PC. Whenever we display media thumbnails, first sucks all the RAM until Windows crashes (we can monitor it via Task Manager). This also happens when you link to the media and it consistent. The only work around we have found is to view the media as a list instead of thumbnails when linking to the media.  I put the max RAM for first allocation in the preferences of the memory, but it seems to make no difference. We run on Windows 10 with 16 GB of RAM installed? It's a strange question that seems to be going through all of our machines (which are still configured). Someone else has this problem? We suspect that this is a bug with the latest version of first? Any help would be appreciated, thanks.

  Please write a bug report on it, listing exactly the question & how it goes and of course that you encounter it on several machines in your office.

  It seems a stupid thing both because they do NOT meet the filing of reports, but... it's the only way to ensure you get the information that you experience a bug and what is the management team. It is in the application forms tabulated bug/feature that they decide to engineer time budgeting and priorities.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  And Yes, clearly pose with memory leaks in 2015.4 across both Mac and at least Win10 version. I'm on Win7 and with not problems... touch wood... but do not know whether or not it is related to the operating system.

  Neil

• Updated for first 2015.3 CC and now Audio dropped from stuttering frame-type questions...

  I've just updated for first CC 2015.3 on my system running on Windows 7, 32 GB of RAM, quad-xeons double...

  Seemed like a good idea...  Now, the sound stutters and drop frames.

  I have a multi-boot system, so I just loaded Adobe CC on my boot Windows 10.
  Always first 2015.3 does not play correctly and stutters.
  Has created a new project-sequence and placed an MP3 on the timeline without any video. Looks a sort of boat engine during playback and the visuals on the counters still indicate stuttering as well.

  Anyone else having this problem after the update?
  How can I get my 2015.2 or whatever I had on my system?  There is no menu drop down more on install to install an older version [other sites showed a fall to the bottom of the box where you can install the CC 2014 version but I have yet to see it]

  Major project I want to do and now the first is completely useless after this upgrade.

  If 100% fresh install go on Windows 10 Virgin operating system still has flaws that had my configuration of Windows 7 operating system, I'm not clear how 2015.3 playback can be rectified?

  After some troubleshooting I've narrowed the issue until this CC first 2015.3 don't like my graphics card, a SoundBlaster Z and its parameters.  2015.2 worked fine, but now the sound stutters and playback is extremely agitated turn upgrade.

  For this project, I am just finishing, I'll use, of all things, the HDMI sound goes to my computer screen.  The Nvidia graphics card I do not mind reading.  I'll tinker later and see if I can find a permanent solution...

• Organize my SSD for first installation / After Effects, your opinions between Mushkin / Samsung PRO 850... ?

  Thank you for taking the time,

  I have i7-5960 x arrives in the mail, it is a huge upgrade for me to sage of the CPU, and I intend to install it on the motherboard ASRock Extreme 4 x 99.

  I have installed ram 64 GB with mono-GPU (Evga overclocked 980Ti) - I also ordered a bolt of lightning ASRock extension adapter to install in one of the PPI.

  with internal Samsung PRO pci 512 m2 will be installed (and hopefully also works!) for my OS/PROGRAMS;

  Now in the light of the information (please do not hesitate to give a few tips if you think that something's going South) above

  I have the options of 3 disks Samsung Pro 850 SSD (1 to) each

  and also Mushkin reactor 1 TB drives coming from another system.

  Now because m2 is expected to be only to win 10/programs installation, I thought I had 3 separate SSD for media (media that I capture) - Render (output) and the Disk Cache

  now I know PRO Samsung SSD are preferred for editing configurations 4 k video, but I also want to save money to change my monitor in the near future, so I want to return

  some of the Samsung SSD if possible.

  I want to ask if I wanted on Raid 0 to increase the speed of 1.5 x times. should I do for media drive, or make it output drive or Cache?

  what player in terms of managing files in Adobe Premiere and AE would benefit more and be more safe if a failure at the top of my head, I think there should be files that I can lose a days work if hds Raid goes down?

  I thought I can keep records of 1 TB of reactor of 2xMushkin in RAID 0 for this player that you would suggest.

  and perhaps just one Samsung drives for others. I'd really love to hear your comments; Even now, I'm sitting on a certain readers, but I want to save money in the long run since Sammy readers are quite expensive.

  Thanks to you ALL

  page Tweakers is a starting point for the advice, but its general advice that may not match your specific needs. some of the information there was written for 7200 rpm disks.

  hackers page says that its important to separate the OS/applications of the media player, so that the windows of standard tasks done constantly in the background is not interrupt reads/writes on the media player when editing. He goes on to say that disk operating system/applications doesn't have to be anything other than an ssd sata. the samsung 950 pro m2 will be only windows boot a bit faster and a little faster, has nothing else once they are open and running of programs.

  scratch disk has several settings for the captured media and rendering of previews. Some people use none and so their installation program does not need a disk separate cache / scratch for first, and they can leave their cache on the disk for the OS/applications. for AE, it will depend on if you have the disk cache. If you are interested in a cache drive, which could be shared with first rendered preview and scratch your files.

  'media' on the page of tinkerers and forums here, almost always refers to camera video files, not video files captured through a map of IO with the first or any other software. If you capture images with a map of IO, there can you want to have a dedicated ssd to it, to make sure that nothing interferes with the disk writes.

  the media cache database files are as creating files for indexing creates to help speed up the playback of files while working with them first. media cache is not the same as zero/capture/preview makes. Bill (forum member) did a lot of tests with disk configurations and also tested leaving media on a sata ssd cache used as disk operating system/applications. He concluded that it makes no difference to performance. so no, there is no need to worry about raid for the first cache files. If you want to use the samsung 950 pro for OS/apps, you can also leave your cache about it. You can even have enough space to use the 950 pro for the cache drive AE and rendered preview files creation too.

  all this is based on the media and what will be done in the timeline, such as screenshots, multi-cam, or preview files. the samsung 950 pro is fast enough to do anything, as long as it fits on the disc. the CT 1 950 pro releasing will see even more people with a configuration to a single disk for everything. other people will be fine with only two ssd sata, one for the OS/apps/cache and other media projects. Some will have more ssd sata or ssd pcie for increasing the speed or the ability to adapt to their specific needs.

• error during an attempt, on demand, a virtual machine 'there is no reservation for < name of action plan >' Thank YOU!

  

  It's the FIRST time I tried a request on this installation of VCAC, I'm sure it's a thing of rights, which rights are should this particular user?

  they are administrator for the targeted in Vcenter data store?

  which opens a session would give more information?

  Thank you!!!

  interesting if I ask "on behalf of" the same user above down I am successful

  You have created a reservation for the Group of companies issuing the request?

• Export from Photoshop Elements 6 for first Elements 8

  I have prepared a slideshow with the Organizer in Photoshop Elements 6 and produced a DVD that has a good image quality but not excellent (I chose File - high setting of 800 x 600). In order to improve the image quality of DVD, I installed the trial version of first Elements 8. I've exported the first Elements 8 show and have several problems.

  1 the picture quality of the DVD produced by first Elements 8 is worse than that produced from the Organizer (Photoshop Elements 6).

  2 titles, transitions and the Bo does not show in first Elements 8.

  3 the sequence of slides in first Elements 8 is different then the slide show in the Organizer (Photoshop Elements 6).

  At the same time a menu pops up asking me if I wanted to convert the catalog to the V6. I refused because I was afraid that the catalogue of the V6 can be replaced, and I wouldn't be able to come back.

  Help, please.

  CarlosWA

  CarlosWA

  Conclusion.

  My results are in agreement with your problems are NOT associated with Photoshop Elements 6 slide show used instead a Photoshop element 8 slideshow in the slideshow transfer to first Elements 8.

  To the test. Photoshop elements 6/first Elements 8.

  First, I created a slide show in the Photoshop elements 6 Slide Show Editor. It consisted of:

  (a) 19 jpeg photos each with dimensions of 3264 x 2448 pixels (which is not recommended to pixel dimensions but which has been used to highlight the project if possible... these photos are grossly oversized since the goal is a DVD VIDEO with standard 720 x 480 image size).

  (b) I used a transition wipe between each

  (c) I used the text inside photos (included in the text was a sequence number so that I could more easily visually follow the sequence of slide show after he was transferred to first Elements 8)

  (d) I added two audio clips as soundtrack (the first one I placed the start just before the last two photos to return on any audio synchronized as well as the loss of a full audio clip)

  (e) I used a pan and zoom for photos 1 and 2 effect.

  The quality of the preview in the editor of Photoshop elements 6 Slide Show was good.

  I issued the editor of Photoshop elements 6 Slide Show slide show, using the slide show option change out 'send to Premiere Elements '. When I did, first Elements 8 open, I put the project preset, and he accepted the slideshow. In the area of media project were

  a folder that contains all the individual components of the slide show

  (b) slide show (Group) video file

  The Visual form (grouped) was automatically placed on the Timeline as well.

  Everything transferred correctly. No problems. SEE IMPORTANT NOTE below.

  I burned even the content of the standard calendar DVD VIDEO of first Elements 8, and the standard DVD VIDEO read on my 19 LCD Widescreen TV.

  To the test. Photoshop elements 8/first Elements 8.

  I repeated the above with Photoshop Elements 8/Premiere Elements 8 and the same show and got the same results.

  IMPORTANT. Be it Photoshop Elements 6/first Elements 8 or Photoshop Elements 8/first Elements 8, I had to return the timeline in the Mode change in order to get the best possible overview so that I could determine or confirm what was on the chronology of the elements of the first. And, making chronology as described with all these pictures oversized took several hours.

  That's what I need to know:

  1 how many photos have you used in the slide show in the Photoshop Elements 6 or 8 slide show, and what were their dimensions in pixels? If you do not know, you can check in the dialog box elements Photoshop Editor, Image, picture, Resize the Menu size or just place your path of the mouse on the file on the hard drive and note the 'dimensions '.

  2. If you transfer your slideshow of Photoshop Elements 6 or 8 for first 8 Elements, use the option 'Send to Premiere Elements' Output and get your slide show on the chronology of 8 items first, you make this timeline by pressing the Enter key on the main computer keyboard so that the red line on the timeline goes green when the process is complete?

  3. your computer optimized, defragmented, cleaned, scratch your files to an external hard drive (NTFS formatted), etc. If you use an external hard drive for scratch files, is there enough space for them?

  4. What is your operating system and what are its resources, for example, the RAM available and free hard drive space. Have you checked your virtual computer memory implemented?

  Stay course on it to rule in or out the wmv not above approach to get your slideshow as a VIDEO DVD. But if you decide to make a detour to save the movie as file .wmv and you deal with oversized photos and a faulty component in the slide show, the writing of the .wmv becomes a possible focus point to find errors. And, if the .wmv is intended for DVD-VIDEO, and then use the (also known under the name of profile) file size = DVD NTSC (720 x 480).

  I suspect that the heart of the problem is going to

  (a) the use of oversized photos

  offending component b in a slideshow
  (c) the size of the slide show

  (d) computer resources

  (e) a combination of all or part of the above

  I will continue to monitor your progress.

  RTA

• I bought an iPad 2 Air and reserved for a free service call to show me the ropes. Nobody phoned me in the allotted time. What should I do?

  I bought an iPad 2 Air and reserved for a free service call to show me the ropes. Nobody phoned me in the allotted time. What should I do?

  Click on the help link at the top of the page and connect with Apple

  Or you are welcome to ask us your questions

  iPad - configuration - Apple Support

  User Guide - Apple iPad

• Need to RAM Kingston for Satellite A100-796

  Hello

  I'm looking for the right RAM Kingston for my laptop, Satellite A100-796. In the Support Center, I was unable to find anything for my model. It seems unexistent. If someone could help

  Thank you

  Have you ever heard of an invention called; Google? ;)

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=34273&ft=m&St=3

  Something else?

• I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

• Noise - HHCTRL. OCX occupied an address box reserved for Windows system DLLS

  OK so I have a satellite phone and since yesterday, whenever I turn on my laptop, I get this message: -.

  RTHDCPL. EXE - repositioning of unauthorized system DLL
  DLL user32.dll system was moved in memory. The application will not work correctly. The move took place because the DLL C:\WINDOWS\system32\HHCTRL. OCX occupied an address box reserved for Windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL

  So, I sat like 1 million bulletin boards etc. and not got anywhere. I'm normally ok with computers, but this time I confess that I have not the slightest idea what to do. It of really bugging me, can anyone help? Some message boards have taken me to a link on the Microsoft Web site to download something, but it says you must have windows XP service pack 2 and honestly, I have no idea and do not want to download something to totally screw up my laptop! (ok, maybe I'm not very good with computers!) Also, I found a site telling me something to do but I had no idea where to go or anything! I need someone to tell me EXACTLY what to do to get rid of this really annoying message. Also some sites say that when you press 'OK' another message appears, mine isn't it just goes!
  Please help, has soon x

  Please do not post new discussions on the topic that were discussed here in the forum. I always recommend looking before opening the new thread.

  Then please check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

  This problem occurs because Microsoft released a new patch for the closure of a breach of security in Windows Internet Explorer.
  But this patch has a bad influence on the Realtek audio chip.
  That's why Microsoft has released a patch to fix the old fix. ;)