[Re: C4240 all-in-One] Printer is installed, but am trying to re - install when

Similar Questions

• "" HP Photosmart e-all-in-one Pr: "HP Photosmart e-all-in-one printer - D110a installed 10 windows now scanner does not work

  Application of scan works

  Try download and install the driver and test the HP Photosmart Software Suite for your printer at http://support.hp.com/us-en/drivers/selfservice/HP-Photosmart-e-All-in-One-Printer-series---D1/4023244/model/4023245

• HP C5380 all-in-one printer: a thick black/gray line down the page when scanning.

  1 HP Photosmart C5380 all-in-One Printer

  2. Windows 7 64 bit

  3. no error is, as usual but preview and print with a dark gray line / think through the page.

  4. I got a new monitor.

  How can I fix?  the optical reading area is clean, no dust or dirt present and it just started this without reason. The connections are good, I unplugged and plugged the cables of the computer and the printer and the problem is still there.

  When I scan the document line is present and even when I print the line appears on the printed page is not my screen.

  

  bbjae, it looks like there may be a residual electric charge accumulated in the unit.  When was the last time you did a Hard Reset on this unit?

  Hard Reset:

  * Unplug the unit while the printer is on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Plug power back in and make sure that the device is running

  So, it is a document with the steps to help fix the vertical lines and scratches in the copies or scans, click on the link below:

  http://support.HP.com/us-en/document/c01887471

• HP ENVY 114 e-all-in-one printer output tray Extender does ' t open or close when printing

  The tray Extender out on my HP ENVY 114 e-all-in-one printer is not open or close when I print. Currently it remains open all the time so it's not the amount. It started when I had a paper jamb because transport has not opened.

  New impressive @Barkingloon 

  If you have a moment, please click the button of "acceptable Solution" on my last message (Message 2), for others in the community can find thread too in case they run into the same problem.

  Have a wonderful Monday

• OfficeJet all in one printer 5510 installed: no printing

  I downloaded the officejet 5510 all in one, message stood ready to work, click it to print printer: error message, what do I do now? I just can't get anything to print. Thank you.

  Kunick wrote:
  I tried the copy, nothing copied, I made this about 4 times still nothing. I install and I got 3 colors on a sheet. No copy.

  What was the error message?  When you try to copy is a blank page out or are there flashing lights or an error message?  If there is no impression then I suggest the contacts of the cartridge cleaning as shown here.

• DeskJet F335 all-in-one - print predefined forms, but all what I type is not displayed.

  The printer suddenly quit everything I type print.  It still prints fine Quickbooks forms, but what I have entered in the form is empty.  Any word processing does not print.

  I tried changing the settings of 'Better quality' and then it would fill my forms, but only in blue!

  I installed a new black ink cartridge, and it works because it print these forms, but it will print if you choose 'Best quality' and then only in blue.

  I tried a printer Test Page and printed logo of Windows and Windows Printer test Page at the top, but the rest of the page is blank.

  Help, please!

  Hello

  I think that you may not have color Inc. as printing from the PC using colors for printing in grayscale.

  Try to print a self-test and verify that all the colors appear:

  Click and hold Cancel, click on copy, then release both buttons, a Self Test page will print.

  Check the two black, Cyan, Magenta and yellow appear, otherwise, you will need to replace the color ink.

  As a workaroud, try to print using black ink only:

  Enter the control panel > printers and faxes.

  Right-click the printer icon, and then click Printing Preferences.

  Select the color tab.

  Check printing in grayscale

  Check use black ink only.

  Approve a dialogue window, and then try printing and check any change.

• 7525 photosmart all-in-one: printer says wireless, but do not print

  We moved our headquarters to a new location in the House. After you reconnect all devices, the printer seems to work (in his view).  Network test results "spent." When I opened a doc and tried to print, it would not, telling me printer was not in the network. Enter new password for ISP provider crossed wireless configuration. Still not printing.

  I uninstalled and reinstalled the printer. Still will not print. I disabled Norton Internet Security where he was blocking the process. I downloaded Team Viewer so that my son could see if he could help me, but couldn't connect to it to use it. I tried to download HPPrint and doctor to Scan, but it will not download. Any ideas?

  Hi there @MI_OHlady.

  Welcome to the forums

  I understand that you have moved your location of printers and it is not printing via wireless network.

  You mentioned that the print and Scan Doctor will not download, and this could be a problem on the computer or with the internet connection. Could try to use another web browser and try to download and run the printing and scanning Dr. again? I would like to know what are the results of the tool.

  Also, try to make copies of the front of the printer and let me know if they work, or if you see errors.

  I hope to hear from you

• New computer and can not get the HP Photosmart C5180 all-in-One Printer to install and work

  I downloaded which, in my view, is the correct driver and mild wear.  I had to get one new computer, my other crashed, I can't install the software that came with it because I now use windows 7.  However, he has worked in windows 7 on the other computer.  I need for my printer and scanner.  I get no answer or scan error if I pass him answers do not.

  Where should I go from here?

  There are exactly two downloads.  One is IrfanView itself and the other is supplements.  This is all you need.

• Canon Imageclass D320 All - in - One Printer not install under Windows 7

  My new laptop Windows 7 cannot install a driver for the Canon ImageClass D320 printer. The utility plug & play in Windows 7 has failed to find a driver for the D320. I have the installation disc that came w / the D320, but it is also a failure install a driver. (This installation disk includes drivers for only Windows 2000, Windows XP, Windows 9 X, and Windows Millennium Edition.) The Canon support site @ http://www.usa.canon.com/cusa/support/office/imageclass copiers/imageclass d320/imageclass d320? selectedName = DriversAndSoftware offers drivers the D320, but only for these same 4 OS (that is, only for Windows 2000, Windows XP, Windows 9 X, and Windows Me). Maybe the D320 needs a 64-bit driver?

  Any information would be appreciated.

  I certainly do not see 64-bit Windows 7 drivers for the D320 to http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d320#DriversAndSoftware , and more operating systems you have listed they also show Vista and Vista 64-bit and Windows 7, Windows 7 64 bit.

  I use Firefox as my Internet browser.  However if I use exactly the same link using Internet Explorer 9, I see no Windows 7 driver.  If I use Internet Explorer 9 and change it to compatibility view, I can see all the drivers.  (To do this in IE 9 just click on the little icon that looks like a page torn paper in have - in the address bar to the left of the Refresh - button or go to the Tools Menu and select compatibility view)

  This is the second time I've seen this problem with the site driver of Canon (where I saw a thing and the person I tried to help him was to see something else on the same link).

  Here is a picture of what I see on the website of Canon, with the drop-down list to choose the operating system by selecting the driver 64 bit Windows 7:

  

• HP Photosmart Wireless e-All-in-one printer - B110a install on Windows 8 pro (64-bit)

  Hello

  I am trying to install the appliance above on my new laptop computer.

  Island firewall and AV are disabled, and I have downloaed the latest installer of Hp.

  the software does and that he sees the device, but towards the end of the installation (after picking if its usb or wifi (wifi), he stopped for a second, and then opens a screen saying:)

  Printer installation has not completed.

  Click Retry to try to reinstall the printer, or click next to continue the installation without connecting to the printernow, it will install later.

  Retry gives me the same message. Then comes ends the installation.

  I caraa complement thew indows printer from the printer section, but the hp Solution Center will not work because it cannot find a dev ice slider.

  How to get the installation to work, or get the solutions Center to see the device?

  Thank you

  Hi Travis. It still does not work.
  Took the plunge and erased from my HARD drive and reinstalled Windows 8 pro. Tried to install the HP software after installation. EVERYTHING IS OK.

• I have a HP Officejet Pro 8500 a Premium e-all-in-one printer - A910n.

  I have a HP Officejet Pro 8500 a Premium e-all-in-one printer - A910n.  I'm trying to Connect HP series, but every time I create and account it tell me to log in using my password of Snapfish.  When I use my password for Snapfish "valid", it comes to request return "invalid password".  How can I fix it?

  If I'm not on the correct Board, please let me know which one I should use.

  Thank you

  Hello. You're on the good advice!  Unfortunately for correcting the offset account problem you meet you share personal information.  To protect your identity and your account security, I will private message you with what HP will need to get your accounts connected HP/Snapfish synchronized upward in order to use web services.

  Thank you!

• Cannot install HP Photosmart C6380 all-in-One Printer

  Original title: HP Photosmart C6380 all-in-One Printer, it will not be installed in the computer disk or web site

  None of the things I have tried will allow programs to download and when I go to detect does not detect the printer at all so anything that I want to use this for is not good and I about ready to kill hp all to gether

  Hello

  1. who is the operating system installed on the computer?
  2. have you checked if the HP printer is compatible with the version of the operating system that you are using?
  3. do you get an error message when you try to install the driver?
  4. what all troubleshooting have you tried?

  If you use Windows 7, follow these methods.

  Method 1: You can also run the fixit of material.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: in the Windows printer problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For more information, see these articles:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
   
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Please provide us with more information on question help you also.

• Cannot install the all-in-one printer

  Download HP officejet 4500 G510-m from HP website. When I click on install, I get the HP message: the system cannot find the specified file. I've never had this installation problem.  I could always install. I believe the download is corrupted

  System Windows 8.1

  I uninstalled printer because had message printer disconneted.

  Check the devices & printers in the control panel

  Model photosmart all-in-one printer scanner copier HPDD4BE7 (HP office jet 4500 G510g-m) is installed on my computer. Not my model according to the image

  I don't have photosmart all-in-one printer. I have printer HP office jet 4500 G510g-m all-in-one

  According to HP print and scan the doctor 4.3

  The following products are visible from your computer

  HPDD4BE7 (HP office jet 4500 G510g-m)

  connection: network

  software requirement: installed

  I tried to print but prints blank pages

  I wonder if the cause of the problem when clicking on install is that I have already installed (HP office jet 4500 G510g-m) HPDD4BE7 so get the HP message: the system cannot find the specified file

  I have good HP office jet 4500 G510g-m printer installed?

   

  Troubleshooting report

  Problem with the yellow triangle detected printer with an exclamation mark inside

  There could be problems with HPDD4BE7 (HP Officejet 4500 G510g-m). Windows will take additional steps to continue troubleshooting.

   

  Solution: Rename the extensions of .dat files in the Windows folder and reinstall the software

  First step: rename the .dat files in the Windows folder

  Search box, type % windir %

  No adjustment results found for your search %windir%\System32

  The first step is not a solution

  Second step: download and install the software from the HP site

  Not a solution: when click on get installation message: the system cannot find the specified file.

  You don't need to the second step if you HP print and scan the doctor 4.3 installed or HP printer installation for windows Wizard. It detects the office jet HP 4500 G510g-m software is not installed, select the printer and click on install to download the software.

  question: when when the get message install HP: the system cannot find the file logle even when Mcafee firewall has been disabled or uninstalled.

  I have no problem, download and install any software but

  HPDD4BE7 (HP Officejet 4500 G510g-m)

  I did the test HP officejet 4500

  Green connection box

  device status green checkmark

  I cannot install the software (HP Officejet 4500 G510g-m) HPDD4BE7 HP printer install wizard for Windows or printing HP and SCan doctor 4.3

   

   

  Ok

  Please try the following steps:

  1. First of all make sure that McAfee of real-time scanning is disabled until you restart the PC.
  2. Open the dialog box run by clicking on the Windows key and the R key on your keyboard.
  3. Type %windir% , and then click OK.
  4. Type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
  5. Type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
  6. By following steps 2 to launch the run dialogue box, type MSIEXEC /Unregister. in the Run dialog box and click OK.
  7. By following steps 2 to launch the Run dialog box, type MSIEXEC /REGSERVER in the Run dialog box and click OK.
  8. Launch the dialog box run by following steps 2, type % temp % and click OK.
  9. Open the last HP installation folder, that starts with the characters 7z (you can sort the view by date humidification) and click on the file Setup.exe .

  Please follow these steps in the exact order, is there a difference during the installation of the software?

• Can not install my new HP All In One printer

  Original title: CANNOT INSTALL a PRINTER ALL-IN-ONE COST of HP 5610

  EVRY TIME I TRY TO INSTALL A FRSH HP5610 ALL-IN-ONE PRINTER, I GET THE MESSAGE AFTER

  NO MISSING DLL FILES, SLBCSP, SCCBASE, GPKCSP ENUM I DOWNLOAD AND TRY TO INSTALL NOT NO CHANCE

  See if it helps:

  Error blocks the installation of the HP printer driver: sccbase.dll, slbcsp.dll, gpkcsp.dll and Enum
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-blocking-HP-printer-driver-installation/5c7910a1-1b4b-404F-875e-12e092b07db1

• To re - install my web download drivers for my Deskjet F4280 all-in-One Printer

  I have installation problems with my Deskjet F4200 all-in-One printer on my Windows 7, Home Premium desktop PC / 64 bit version & I had, once last month, uninstalled my I bought online for my version of platform & bit of the os, printer drivers & all program of printer drivers have been uninstalled successfully in the programs section and my control panel features except for :
  HP Software IDF.

  I ended up, in addition to the tasks above performed & completed, deleted all files remaining hp of my drive (c).

  I discovered a web page of troubleshooting on the hp.com Web site, under the following title:

  ""Of HP Installer has stopped working "or the installation program does not run when you install under Windows 7 HP printing software"

  on the following web page: "http://support.hp.com/us-en/document/c03030583".

  My processor information:
             "AMD Athlon II X 2 240 processor / 2.80 Ghz '.

  I tried to re - install my drivers for my printer, & have problems trying to re - install, with no luck.

  I have read the following information since the last link web I mentioned (SHOWN above and here @: 'http://support.hp.com/us-en/document/c03030583') trying to follow them to correct my problem exact, but without success.

  If anyone who reads this could have a solution to my problems, please contact me either by one or more of the following methods:

  {Deleted private information}
  

  Thank you, Christopher Canfield.

  The troubleshoting document you provided a link to not tell to use the hotfix with the processor installed in your desktop PC.

  Have you tried to use the Wizard for Windows HP printer installation?

  I recommend to try it. It can solve the problem you are experiencing.

  If it is truncated, without success, then click on the following link and select Windows 7 from the list provided on the HP document.

  Uninstall the HP printer software.

  Once you have completely uninstalled the printer software and driver, run the HP printer install wizard again.

  Please keep us in the loop by posting your success or lack of success with the installation of the software of the printer here in your thread.