Rays LAN2LAN remote access

Similar Questions

• Smartphones blackBerry for PC remote access

  Is there any application for Blackberry to have remote access to the PC? for example, logmein or similar to microsoft mobile 6.5? Thnx

  Hello and welcome!

  Take a look at RDM + (aka RDM liked) by Shape Services. You can find it in the App World or here: http://www.rdmplus.com/rdm/bb/index.html

  I think this will do what you need. There is a free trial to use and review before you buy.

  Good luck

  Ray K.

• No remote access after you activate the Radius AAA

  Hello

  I can't access our catalyst 4006 after activating the AAA for RADIUS. I have install IAS on our domain controller configuration / a catalyst as a Radius client and configured a remote access policy that points to an ad group to allow access to the switch. When I try to connect to catalyst by my user information in AD, it seems to crash after I type my password, asks for the password again, then says access denied. This happens both on the console and through a telnet session. I have included below the configuration of my AAA.

  What Miss me?

  Tim

  (Cisco IOS 12.2 v software (25) EWA14)

  AAA new-model

  !

  RADIUS-server host 10.100.x.x auth-port 1812 acct-port 1813 key xxxxxxxxxx

  Server RADIUS ports source-1645-1646

  !

  AAA Radius Server Group server RADIUS

  Server 10.100.x.x auth-port 1812 acct-port 1813

  !

  AAA authentication login default group local line Radius servers

  the AAA authentication enable default group, select Radius servers

  Authentication servers-Radius AAA dot1x default group

  Group AAA authorization exec default for authenticated if Radius servers

  Group AAA authorization network default Radius servers

  AAA dot1x default arrhythmic accounting Radius Servers group

  AAA accounting by default start-stop group Radius servers directly

  !

  line vty 0 4

  by default the authentication of connection

  Tim

  I think that the immediate problem is that the source address of your switch ussed is not address who is pregnant with Ray. The Radius Server is 10.100.182.250 and it is in the subnet of the interface vlan 182. If the address of the interface vlan 182 will be the source address of the Radius request. Difficulty which is to use the command of source ip range address and specify the address at which you want the switch to be used. Of course, in the short term, it would be easier to change the Radius Server to wait 10.100.182.2 as the address of the customer.

  HTH

  Rick

• Remote access IPSec client IPSec network remotely

  Hello

  I have the following problem.

  We have two sites to connect with an IPSec VPN L2L.

  Site A: 192.168.13.0/24

  Site B: 192.168.2.0/24

  On both sites, we an ASA5505 (basic license) to finish the tunnel.

  On Site B, we also got a remote access vpn to which we can connect using the vpn client.

  The lan2lan tunnel works very well and if the remote vpn access.

  Now I want to connect to the Site using my vpn client connected to Site B.

  Configuration:

  Site b:

  same-security- allowed traffic intra-interface

  same-security- traffic permitted inter-interface

  nat network object

  Subnet 192.168.2.0

  NAT dynamic interface (indoor, outdoor)

  NAT (inside, outside) static source 192.168.2.0 255.255.255.0 destination 192.168.13.0 static 255.255.255.0

  the SITEB object network

  Subnet 192.168.2.0 255.255.255.0

  network of the VPNPOOLB object

  255.255.255.0 subnet 192.168.25.0

  network of subject-group 10

  object SITEB

  object VPNPOOLB

  access-list standard split1 ip 192.168.13.0 allow

  access-list standard split1 permit ip 192.168.2.0

  IP local pool pool1 192.168.25.1 - 192.168.25.254 255.255.255.0

  access-list allowed extended L2L object-group 10 ip 192.168.13.0 255.255.255.0

  L2L 1 crypto card matches the address L2L

  REMOTEACCESS group policy

  Split-tunnel-network-list value split1

  address value pool1 pool

  Site A:

  NAT (inside, outside) source static 192.168.13.0 255.255.255.0 static destination 192.168.2.0 255.255.255.0

  NAT (inside, outside) source static 192.168.13.0 255.255.255.0 destination 192.168.25.0 static 255.255.255.0

  the SITEB object network

  Subnet 192.168.2.0 255.255.255.0

  network of the VPNPOOLB object

  255.255.255.0 subnet 192.168.25.0

  network of subject-group 10

  object SITEB

  object VPNPOOLB

  L2L 192.168.13.0 ip extended access-list allow 255.255.255.0 object-group 10

  L2L 1 crypto card matches the address L2L

  There is no vpn-filters or other special air in place...

  So tempted to my Site A vpn client ping while I was debugging ipsec 255 on site B:

  the asa matched l2l-tunnel for traffic from 192.168.25.x to 192.168.13.x

  .. but when im making a detail his see the crypto ipsec is no packets be encrypted...

  then of course no package to reach my asa on site one.

  Everything but the connection from the pool of clients to implement one works very well.

  concerning

  TJ

  A number of things:

  (1) B site, crypto ACL is as follows:

  access-list extended Lan2Lan allowed object-group 192.168.13.0 ip 255.255.255.0

  --> doesn't look like not to he refers to any object-group in the access list.

  It should be:

  access-list allowed extended Lan2Lan object-group 10 ip 192.168.13.0 255.255.255.0

  (2) it is also not advisable to configure the dynamic map with sequence number low instead of the greatest number of seq in the crypto map. Your site has at present the following:

  card crypto RemoteAccessMap 1-isakmp dynamic ipsec RemoteAccess

  RemoteAccessMap 2 crypto card matches the address L2L

  I propose the dynamic map to a number of lower sequence as follows:

  No RemoteAccessMap 1-isakmp dynamic ipsec RemoteAccess crypto card

  card crypto RemoteAccessMap 65000 ipsec-isakmp dynamic RemoteAccess

• Homekit remote access does not

  Hello.

  I have a Schlage door sense block 100% functional when connected by bluetooth with my iphone (ios 10) either when I m with the sense or Homekit app it management.

  The problem starts when I try to work remotely.

  Yes:

  (1) my 3rd generation Apple TV (Maj) is connected with the same iCloud account that I use in my other devices, including my iPhone

  (2) Apple TV shows as 'connected' when I check my hub within the Homekit app status

  (3) Apple TV is "always on."

  (4) I tried to connect a disconnect in icloud again several times.

  Need help please!

  I chose this lock exclusively to access remote homekit.

  Thank you!

  It seems that the fault is in schlage's recent firmware update.  They have posted the following on their web site about seven 18, 2016:

  Some clients of Schlage sense suffered a loss of access remotely through the 3rd generation Apple TV after update of their lock to the version of the firmware 3.42.

  We are aware of the problem and are working quickly to resolve.

  In the meantime, you can learn more details about how to set up an Apple TV and iPad for remote access and automation of your Schlage lock and other accessories HomeKit.

  http://Unlock.schlage.com/blog/unlock-Schlage/Schlage-sense-and-remote-access-th rough-apple-tv

• My Mac has been hacked, abrupt configured mailboxes. Remote access?

  Yesterday on my Mac a sudden notice appeared saying Exchange mail has been added. It was my old College e-mail although it should no longer be valid. Then a pop up says something invalid certificate and a person is faking d'[email protected]... Etc. Who is my former college. Then I tried to print something, and he says he can't trust my local printer and it took forever to print a document. Then 2 pop ups asking if I don't mind garguillo and other netbios to receive s of incoming connection, which I refused. I unplugged and changed the password of my iCloud. I don't have on the sharing options and I never configured this old email on my new Mac Pro retina. Is it possible, he had remote access? What could have happened? What are the main precautions to be safe on Apple devices? Can someone list them? I'm really worried. I have kaspersky from App Store download.

  A

  The first step and perhaps the only necessary one, is to get rid of your software "anti-virus". All these software are worse than useless on a Mac, and it may well be the cause of the problem, or make the problem worse.

  Please remove "Kaspersky Security" by following the instructions on this page. If you have a different version of the product, the steps may be different. The product includes a Safari extension which may not be revoked by the uninstaller.

  Back up all data before making any changes. Never install a software "anti-virus" or "anti-malware" again.

  B

  Verify that the date (including year) and the time indicated by your system clock is correct.

• remote access MacMini... MOM help

  Question: how to set up remote access to the computer of my mother, so that I can address any technical questions she has?

  I have an iMac end 2013 with El Capitan 10.11.5.

  My mother's computer is a mac mini upgraded to 8 MG of RAM and also with El Capitan (do not know if there were other updates since I was there last).

  I would like to be able to connect to the remote computer in order to see its screen and be able to help in updates remotely.

  I heard that El Capitan was the built-in ability, but I wanted to know how to put in place.

  Thanks in advance for your help.

  MOM help

  Set up and use Back to My Mac - Apple Support

• Is it possible to remote access to files on airport time capsule without a great second computer mac at home?

  Hello!

  I read the articles on access distance to another mac, but what I need is to remote access to files on airport time capsule without a great second computer mac at home.

  Only Mac... Mac you will use for remote access to files on the Time Capsule... is necessary.

  Set up and use Back to My Mac

• alternatives to LogMeIn Pro for remote access?

  Greetings.  Currently, we have systems in the United States, Switzerland and the Mexico that I supported via remote access using LogMeIn Pro.  We paid for a subscription before free LMI Pro has been abandoned even to appreciate the characteristics of LMI Pro.  But as LMI has eliminated this free service, it seems their subscription rate more than doubled each year.  We currently need remote access to 3 Macs and 2 units of Windows (ew).

  Last year, we paid $174. for the annual subscription in support of these 5 systems.  I just checked on the price of renewal and it shows $349.00 for renewal.  This is getting too expensive!

  Last year, I invested in ARD to support my mother MacBook and the MacBook from an old friend, rather than pay LMI for a subscription in support of these systems.  ARD was a good alternative for these systems, but it is not a realistic alternative to remote systems for charity I help support.  Partly because of the PC, also because what it requires port forwarding in the router and finally because I have to be at my computer to use ARD to access those other systems.  LMI offers the possibility to access systems through an iOS app and can be used by other members of the team of charity, anywhere in the world everyone is physically located.  That's why we have maintained the LMI Pro subscriptions for a number of years.

  But with the perennial increase rate of LMI ridiculous (I think they can take their pricing of Obamacare), I'm on my eternal quest for an alternative to remote access.

  Can anyone offer advice?

  Thank you very much for your review,

  Dee Dee in Florida

  There are:

  -Apple Back to My Mac

  Set up and use Back to My Mac - Apple Support

  -Team Viewer free for non-commercial and paid for commercial use.

  -GoToMyPC, it also works with Mac

• Is it possible to remote access to my Mac Boot Camp partition?

  I know this may sound stupid, because my Mac partition is offline due to Boot Camp, but I just wanted to know if it was possible to remote access and open terminal applications / mac from my Mac at a training Camp. I don't mean for the use of Google Drive either. Looking something like a reversal Parallels/VMware.

  Hope that explains it.

  Too bad. I found a solution. Used Paragon Software HFS + to access and modify the shared files of Mac in Bootcamp.

• Back to my Mac drive remote access

  I tried to set up my Time Capsule and the hard drive connected to it to be accessible on the internet via Back to My Mac. My Time Capsule is the main router and the modem to the ISP provided is in bridge mode. I followed the instructions of installation to the letter, but it still not connect when I try to on the internet. I tried to connect life iPhone tethering and friend home as well with no luck.

  Tried to help out a little and when I go to the iCloud tab in system preferences, I get the following message on the CCMM: Back to My Mac can be slow because multiple devices on your network provides network services. Turn off NAT and DHCP on one of the devices and try again.

  The problem is that NAT is enabled, my Time Capsule is set up for back to my Mac and I enabled sharing of files on it, as well as on WAN access records. I also tried the deactivation and activation CCMM on both Time Capsule and in settings iCloud, still the same error. My only goal is to be able to connect to the Time Capsule and access the files remotely.

  I hope someone can help.

  Thank you!

  provided the ISP modem is in Bridge mode

  It may or may not be, because ISPS generally have some strange ideas about what the term "Clipping" might mean.

  What is the number and model of your modem?

  If all goes well, it is a simple modem.. .with a single Ethernet port the device... as in the example just below, which is the type of device that you really need to be able to access on your network from the Internet devices.

  

  I hope once again, it is not a type of modem/router or gateway device, which combines the functions of the modem router and separated in one package... as in the example below. Often, it is not possible to configure this type of law only as a simple modem device... and what the ISP calls 'Clipping'... is not really. Thus, you're left with a problem NAT which slows down and restricting remote access.

  

• NB - remote access is not possible

  I have a remote that gives me a secure access to the server from my employer, so I can work from home through my netbook.
  However, I can connect to my place of work, but when I try to access the foldersand, click the icons I get a message that says: this action is only valid for products that are currently installed.

  The remote access works without problem, when I use it with my AppleMac which is in the same room.
  I'm not familiar with the PC, so do not how to solve this problem.

  Hi Monkey_1,

  To be honest, this remote control software does not know about me, and I've never heard.

  I think the best idea would be if you contact the local administrator of your company or the manufacturing of this software. Here he s a user to user form on Toshiba laptops and I doubt anyone can help you in this case.

  Normally, such software will install the directors of the company and you must ask him about it!

  Good luck! :)

• Sharing screen or remote access

  Hi all.  I need some guidance on how to gain access to another Mac computer that is not on my wifi network.  My mom is a bit lost when it comes to computers and calls all the time asking questions about that or the other.  I wish I could help more, but I can't always do more in its place.  I assumed that she could do a screen with me sharing, but I did not understand that yet.  What is the best way to be able to see its screen and help her to?  I have a time machine from the airport, an Airrus SB6183 as my modem and an iMac or MBP to use.  It has an iMac.  Are our different ISP, my comcast, ATT hers.  If you could provide some info that would be great.  Thanks in advance.

  Jack

  Understand the Messages and screen sharing and test this or use some screen sharing service; Perhaps TeamViewer or an alternative, either commercial or potentially as free if the associated licenses allow your intended use.  It will be by far the best approach here.   Add the Messages application to connect and work through the sequence to accept or request required screen sharing.   Or for the

  You're probably not going to use Apple Remote Desktop (this forum), because it is a commercial product and one that is overkill for this use.   Messages and screen sharing will be sufficient, or the built-in screen sharing client can be used to share the desktop.

  Otherwise, remote access means to find a VPN and a VPN server and probably configure dynamic DNS to allow you to get the IP address of the remote site, and probably all operating in a gateway of firewall box you have acquired for the remote site.   Modems will probably have to be moved in their mode bridged, that leads them to the gap and allows your gateway box control liaison network without NAT clutter it.  ISPS are only material if they block the access of particular network involved, or do not allow the modem to be toggled in bridged mode.

• Battery Bluetooth Toshiba v Vodafone Remote Access Card

  I have a conflict between the Toshiba Bluetooth stack on my Dell Latitude D410 (Windows XP SP2) installed and My Vodafone Connect Remote Access Card. When I insert the card, I get an error message asking me to verify that the card is inserted. When I uninstall the Bluetooth software, the card works satisfactorily. Disable Bluetooth doesn't have the same effect. Any ideas?

  I assume you are using the USB Toshiba bluetooth adapter

  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/Toshiba/USB-BT-adapter.html

  Otherwise, the Toshiba Bluetooth stack does not work on your laptop. Follow these steps to make it work.
  Delete Vodafone software and the Toshiba Bluetooth Stack.
  Download the latest battery Bluetooth from the following URL and install it:

  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/download.php

  Now install the Vodafone card again. Now, it should work.
  Note the order of installation is important as otherwise you will get a COM port conflict

• I gave remote access to a scam.  What should I do?

  I was on my computer when I got a message saying that my computer has a virus.  I couldn't use the mouse, or close the session.  My system froze.  I was told to call the number on the screen.  When I did I gave them remote access.  Pretty quickly, I knew it was a scam but they dial for a few minutes.  Should I be worried?  The scam was supported IT Aspire.

  Completely erase your hard drive and he re-partition. Reinstall a new copy of OS X. change all of your passwords. Report it to your banks and credit card companies. You can just for the re - issue new credit cards.

  A good rule to follow: If you don't know what is on the other end of a web link, then don't click it. There is no real viruses affecting a Mac, as update you OS X means that you should go to El Capitan to protect against the latest RansomWare - KeRanger.

  Identify the fraudulent email 'phishing '.

  Beware of the local browser Tech Support, Phishing scams

  Remove the browser pop up problems

  Malwarebytes | Free Anti-Malware detection and removal of software for

  Apple Macintosh computers

  Adblock more 1.8.9, GlimmerBlocker, or AdBloc k

  Remove the adware that displays pop-up ads and graphics on your Mac

  How to remove adware FlashMall of OS X

  Stop advertising and pop-up advertising windows in Safari - Apple Support

  2.11 DetectX

  Useful links about Malware problems

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty of pop-ups in browser that support Safari.

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.