Re: Error setenv.ini using form on NB100 recovery USB pen

Similar Questions

• Error message 'setenv.ini' not found during installation

  I want to install the XP Pro version of the cd but I get the error message "setenv.ini" not found

  Hello

  This occurs if you install Windows from the Microsoft or Toshiba Recovery disk?
  In addition, it would be interesting to know what laptop you have.

  The disc is maybe scratchy check it!

• NB200 - 10G - recovery process failed - Setenv.ini question

  Hello, I have a problem with my netbook.
  I want to recovery my windows with operating system windows xp delivered in my hard drive, but this reconstruction process failed.
  On the recovery screen GUI (RecoGUI) displays a message box and a message:

  "ERROR: Setenv file D:\Setenv.ini or X:\tools\Setenv.ini not found!

  wrote about this.

  so I tried to change the Mode of the controller SATA in the BIOS from AHCI to compatibility.
  But this change does'nt have effect.
  This error message always appears when I tried recovery and I don't have a recovery disk.

  What should I do?
  Thank you

  This s pity companion
  Seems that something was wrong with the partition of HARD drive and the HARD drive recovery procedure.
  From my point of view there is no much to do

  If the recovery of HARD drive does not work, then you can install the operating system only using a disc.
  Either you use a Toshiba Recovery disk or a Windows shared drive.

  Recovery disc can be ordered here:
  https://backupmedia.Toshiba.EU/landing.aspx

  By the way; Need a CD/DVD USB drive in order to install the operating system from the disk.

• Tecra M7: Unable to create recovery CD: lack CDDVD.ini - INI file load error: RDC_info.ini

  I recently bought a Tecra M7, but the system does not include recovery media, just a recovery partition and a recovery disk creator.

  However, when I try to run the Recovery Disc Creator, he responds with "error loading INI file: C:\Program Files\Sonic\RecordNow!\RDC_info.ini.

  I opened this file in an attempt to determine the error, but the content simply refer to a file named CDDVD.ini. I looked everywhere in the hard, even mounted the recovery Partition, but could not find this file.

  Search on Google, I found that this case is regularly brought disappeared, and that without it, the recovery media cannot be created. A person said Tech Support by sending an email the file, another was sent by another user.

  In both cases, the user was immediately able to make records. In any case, there seems to be a standard file, referring to the "Add_info.ini" (Application and drivers disks) and "Rec_info.ini" (OS Recovery Disk), fairly uniform and unchanging across all systems that use this method to create discs.

  Please, could someone email me them or post it here so we can all see?
  If/when I get this file, once I determined it works I post here.

  Daniel

  Hello

  You can buy a set of recovery disc for Toshiba for all £17 and£ 18. Maybe it will help if you can't find the file.

  Thank you...

• shared files Windows server 2008 when I try to access the logged error shows try 704 form again later.

  shared files Windows server 2008 when I try to access the logged error shows try 704 form again later. While it uses this file from the last three months

  Hi Maury,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please post your question in the TechNet Windows Server 2008 R2 Networking - read only forum.

• "Access denied" pop-up error while opening the form online Adobe in IE8.

  "Access denied" pop-up error while opening the form online Adobe in IE8. I use a crosslink to connect to the customer's network and then open IE with Tunnel of App. Tried to re - install Acrobat reader several times but always present problem. Even tried to change the properties of the PDF (-> Preferences - general/Internet/Security Enhanced Edition)

  Problem is resolved...

  Fact following the steps:

  Uninstalled Adobe

  Disable anti virus running to do a fresh install of adobe reader 10.0

  Delete the adobe folder under <> \AppData\Local>Adobe and <> \AppData\Roaming>Adobe

• Problem component form IN. custom form using forms of customization

  I have an obligation to use forms of customization to call a custom since the PO form form. The user wants to make changes to another table, return to the calling form and be able to discard all changes in both forms. I created the custom at the STATION before returning form and commented instructions commit.
  
  First of all, I used the internal command to customize the forms 'launch a function"to call the form. The probem here is that committed changes are committed to the database when the custom form is closed. My guess is that the launch of a function to open the form in a new session. Is it possible to change this in the configuration of the Application of finance?
  
  Second, I tried to use 'Run a procedure' with this code
  =' start FND_FUNCTION. EXECUTE (FUNCTION_NAME = > 'fnc_name', OPEN_FLAG = > 'Y',)
  SESSION_FLAG = > 'n', ACTIVATE_FLAG = > 'Y'); end '
  where this error "could not be determined due to the error ORA-00923: KEYWORD not found or provided. I replaced the single quotes around the literal with the double quotes, which resulted in a large amount of errors. I tried to replace the double quotes with three single quotes and got the FROM keyword error again.
  
  I appreciate all help. Thank you!

  FND_FUNCTION. Execute is an API on the client side that in the FNDQSF library, while the BuiltIn Execute a procedure studied the only DB procedures.

• How FTP a file from the client computer to the server database using Forms 10 g

  Hello
  I want a file from a client computer to the database server computer using Forms 10 G (or PL/SQL) via ftp.
  could you please tell me how can I do this
  
  Concerning

  Hello

  I gave u the adequate instructions on webutil configuration but u did not comply with it.
  I will post again please read correctly and follow it.

  How to get running with WebUtil 1.06 included with Oracle Developer Suite 10.1.2.0.2 on a win32 platform
  Solution
  Assuming a new 'Complete' installation of Oracle Developer Suite 10.1.2.0.2,
  Here are the steps to get a shape of small test running, using WebUtil 1.06.

  Note: Oracle_Home is used as an alias for your real oDS ORACLE_HOME.
  Feel free to copy this note to a text editor and do a find/replace on
  Oracle_Home with your real value (no slash). Then, it is easy to
  copy and paste the actual orders to be run from the copy of the memo.

  (* 1) * download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
  and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.

  (* 2) * copy or move jacob.jar and jacob.dll
  C:\webutile is the folder where you extracted Jacob and ends in ...\jacob_18
  CD C:\webutile
  Copy jacob.jar Oracle_Home\forms\java\.
  Copy jacob.dll Oracle_Home\forms\webutil\.
  Staging of Jacob is no longer needed and can be deleted.

  (* 3) * sign frmwebutil.jar and jacob.jar
  Open a DOS command prompt.
  Add Oracle_Home\jdk\bin in the path:
  set PATH=Oracle_Home\jdk\bin;%PATH%
  Sign files and check the result of success:
  Oracle_Home\forms\webutil\sign_webutil Oracle_Home\forms\java\frmwebutil.jar
  Oracle_Home\forms\webutil\sign_webutil Oracle_Home\forms\java\jacob.jar

  (* 4) * If you already have a pattern in your RDBMS that contains stored WebUtil code,.
  You can skip this step. Otherwise,.
  Create a schema for the stored code WebUtil and privileges to
  Sign in and create a stored package. Name of the schema "WEBUTIL" is recommended
  for no reason other than consistency based on users.
  Open Oracle_Home\forms\create_webutil_db.sql in a text editor and remove or comment
  the declaration of EXIT, in order to see if the objects have been created witout
  errors.
  Launch SQL * more like SYSTEM and the issue:
  Webutil IDENTIFIED BY password CREATE a USER
  DEFAULT TABLESPACE users
  TEMPORARY TABLESPACE temp;
  /
  GRANT CONNECT, CREATE PROCEDURE, CREATE SYNONYM TO webutil PUBLIC;
  /

  CONNECT webutil/webutil@rcci
  @Oracle_Home\forms\create_webutil_db.sql
  -Inspect SQL * Plus output for errors, and then
  CREATE a PUBLIC SYNONYM webutil_db FOR webutil.webutil_db;
  /

  Reconnect as SYSTEM and the question:
  Grant execute on webutil_db to public;

  /

  (* 5) * Edit Oracle_Home\forms\server\default.env and add Oracle_Home\jdk\jre\lib\rt.jar
  to the CLASSPATH entry.

  (* 6) * add edit Oracle_Home\forms\server\formsweb.cfg default insde:
  archive_jini = frmall_jinit.jar, frmwebutil.jar, Jacob.jar
  Archive = frmall.jar
  also add:
  webutil
  WebUtilLogging = off
  WebUtilLoggingDetail = normal
  WebUtilErrorMode = alert
  WebUtilDispatchMonitorInterval = 5
  WebUtilTrustInternal = true
  WebUtilMaxTransferSize = 16384
  baseHTMLjinitiator = webutiljini.htm
  baseHTMLjpi = webutiljpi.htm
  baseHTML = webutilbase.htm
  archive_jini = frmall_jinit.jar
  WebUtilArchive = frmwebutil.jar, jacob.jar, f90all.jar
  Archive = frmwebutil.jar, f90all.jar
  lookAndFeel = oracle

  (* 7) * Oracle_Home\forms\server\webutil.cfg edit and add:
  Transfer.Database.Enabled = True
  Transfer.appsrv.Enabled = True

  (* 8) * start the OC4J instance

  (* 9) * start Forms Builder and connect to a schema in the RDBMS used in step (4).
  Webutil.PLL open, make a 'compile ALL' (shift-control-K) and generate PLX (Ctrl-T).
  It is important to generate the PLX, in order to avoid the FRM-40039 indicated in Note 303682.1
  If the PLX is not generated, the library Webutil.pll must be fixed with
  path information full access to all who wish to make use of WebUtil. This is NOT recommended.

  (* 10) * create a new WBF.
  Open Webutil.olb and subclass (not copy) the Webutil opposes the shape.
  There is no need to subclass the WebutilConfig object.
  Attach the Webutil.pll library and remove the path.
  Add a logon trigger IT with code
  NULL;
  to avoid having to connect to a RDBMS (optional).
  Create a new button on a new canvas, with the code
  show_webutil_information (TRUE);
  in a trigger WHEN BUTTON PRESSED.
  Compile the FMB to FMX, after doing a compilation-All (shift-control-K).

  (* 11) * under Edit-> preferences-> Runtime in the form designer, click the "Reset to Default" If
  the "Application Server URL" is empty.
  Then add '? config = webutil' at the end, if you end up with a URL of the form
  : http://application-tier server: port/forms/frmservlet? config = webutil

  (* 12) * run your form

  Note: If you want to use Jacob and you can configure jacob too, if you follow the above mentioned instructions.
  Sarah

• DROP the USER using Forms 6i

  Hai All,
  
  I want to create and drop database through forms 6i users.
  
  The user creation works fine for me, but the deletion of the user does not work.
  
  I use the code
  FORMS_DDL ('DROP USER CASCADE TEMP_USER'); to remove the user.
  
  but it's not working.
  
  
  one you suggest how can I remove a user from the database using forms?
  
  
  Thank you
  
  Manu.

  It works through several sql?
  If so you could do a test with immediate execution...

  create a database procedure:

  create or replace procedure execute_immediate(ivStatement in varchar2) is
  begin
    execute immediate ivStatement;
  end;
  /
  

  and call from forms:

  begin
    execute_immediate('drop user test_user cascade');
  exception
    when others then
      message(sqlerrm);
  end;
  

  run errors of immediate installation of oracle, so you should see what is happening

  concerning

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• Compaq Presario CQ71 - error 1002 when using recovery (windows Vista)

  Hi guys,.

  I just encountered error 1002 while using the recovery... Recovery successfully crossed reformattng my drive, but crashed before reinstaling the original content. It's okay if I'm trying to hard drive or dvd rom recovery, all this translates into error 1002. I did some research and it seems that it is a very common error in hp without adequate solution products. I think I'm out of luck because my warranty expired years ago... How can I solve this problem? For me, it seems that recovery content originally placed on my hard drive (and later burned on the DVD by me) had been damaged. I see 2 possible solutions here:

  -to order an another recovery of the drives together (although I saw a few reviews it did not)

  -buy the new "Windows" and install a new fresh install (I will be able to perform the new installation at all?)

  I'd really appreciate pointers as I really don't want to lose my money for a solution that would work!

  Kind regards

  Robert

  Hello

  You can call the MSFT customer service and they will generally be able to find it for you.

  http://answerdesk.microsoftstore.com/msusa/en-us/answerdesk/answertech

• Windows 7 error 14001 while using iTunes on my windows XP, please help

  Windows 7 error 14001 while using iTunes on my windows XP, please help

  Please ask your question on the forum from iTunes here: https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Blue screen error: 0x0000001a when using system to restore with new hard drive disk

  original title: blue screen error when you use the system disk to restore with new hard drive

  I bought a new hard drive to my computer because the old one gave me a bunch of error messages on screen blues. I installed in the tower and tried to use my restore and system recovery disks that the manufacturer has given me, the process has got to the last disk then asked for the system once again restore disc, and then began to load the last steps and went to blue screen error. I don't know what to do, I mean it's a whole new drive hard, so where could the error come, theres nothing on the hard drive because I have not yet used really, yet. Help, please

  I have finally fixed the problem myself. The problem was that one of the sticks three memory was bad and the only way I could test this error. I took two sticks a left, used disks I had and was able to restore my computer, then I put a stick, turned on the computer, had no errors so I let him, so I put the last stick in and com immediately on, I had the Disconnections: memory management and that's when I knew that the last stick of memory was bad I took it back and now my computer works well and I can't buy more memory for not too. So if someone gets this BOSD error on memory, I'd say 8/10 computers have bad memory (not a number). If youcannot run the tool of diagnosis of memory like me then I would suggest to do what I did with the trial and error, it was the only way to understand the problem. Thanks for your help

• build error of createUser using the c# code sample

  I get the following build error when you use the c# code for the createUser use method example.

  I use VisualStudio2008 and the Blackberry_Admin_API - 5.0 - US.pdf c# code example.

  Build error States:

  Cannot implicitly convert type 'BESAdmin.BASemailExchangeWebService.EnableBlackBerryUserAttributesType' in 'BESAdmin.BASCoreWebService.EnableBlackBerryUserAttributesType' C:\VS2008\BESAdmin\BESAdmin\Form1.cs 76 488 BESAdmin

  The build error is on this part of the code:

  for (int j = 0; j)< attributes.enableblackberryuserattributes.length;="">

  {

  userEnableBBAttributes.enableBlackBerryUserAttributes [j] = attributes.enableBlackBerryUserAttributes [j];

  }

  Everyone has this same problem and found the solution?  It seems that there is something missing or incorrect in the sample code around type conversion between the EnableBlackberryAttributesType.

  Thank you, Ed

  Hi Ed,

  I tried throwing the code example in a project already created the mine and has not known this error at compile. The two types of objects must be the same, so I don't know why there is no conflict with assignment.

  Please try to use the sample code to create a user from the BAA API reference documents:

  http://www.BlackBerry.com/developers/docs/BAA/5.0.0/

  Or the Knowledge Base of the developer section:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/1608023/How_To_-_Get _...

  It can also be a good idea to recreate your proxy to do this.

  Let us know if the problem is still evident with the examples above.