Re: How to install Win XP on a Satellite A300 - 15 d

Similar Questions

• Re: How to install any boot on the Satellite A300 Vista Manager

  I want to install second OS on my A300 but can't do any boot manager works with Vista.

  IBM os/2 bootmanager can start Vista, but Vista say he can't run winload and hang up, Acronis bootmanager does not see any OS to Vista's NTFS disk...

  Hello

  Vista supports a clean Vista Boot Manager and there you can add all the installed OS.
  I did after I installed my Win XP as second operating system.

  First, I installed Win XP on the second partition but I couldn't start on Vista because Win XP damaged MBR (master boot record). That's why I started again from disk (NOT the Toshiba Recovery disk) Vista and the Vista disc to repair the MBR.
  Then, I started in Vista and edited the BCD. You can use the freetool like EasyBCD because that would be the best way to add a second operating system for the Vista Boot Manager.

  See you soon

• How to install Windows XP Home on Satellite A300?

  Please help me! How to reformat and install the operating system Windows XP Home for Satellite A300?
  Can someone help me with this?

  Thank you...

  Hello

  First you need to download xp drivers: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  Second, you must create the floppy or custom installation CD of Windows XP with integrated storage drivers. the custom installation CD, you can use Nlite http://www.nliteos.com/. There are guides in different languages, so you won't have a problem to create a. Don't forget it will have to include "Storage drivers", without them, Setup does not recognize the hard drive.
  Third install XP :)

  But be aware, you may encounter some problems, as audio doesn't work do not (updated Windows XP specific need or Service pack 3), some Fn keys not working do not, some unrecognized hardware and so on... You really have to patient when installing XP on new laptops. So good luck

  (Tip: download all readers and store it because it is quite possible that the LAN/WAN connection will not work without a driver)

  See you soon

• Re: Unable to install Win XP SP2 on Satellite A300 - 1 MM

  Hello

  I want to install Windows XP with Service Pack 2 on my laptop Tosiba Satellite A300 - 1 MM. I get an error message.
  Who can help me please?

  Hello

  Did you start WXP SP2 installation, with SATA drivers?

• How to install Win 7 on a Satellite M30X-165 (S)

  The laptop has a Pentium clocked at 1.6 GHz and 1 GB of RAM which I would upgrade to 2 GB. I want to change the OS from Win XP to Win 7. I know that Toshiba do not support the software and drivers for Win 7:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=235849𹥉

  But when I remove the hard drive, install Windows Vista and later upgrade to Windows 7 If this could be a way to use Vista drivers and Toshiba Software, especially software for function keys. I think that the third-party software should come through Win 7 update.

  Some devices are:
  Intel (r) PRO/Wireless 2200BG Network Connection
  Realtek RTL8139/810 x Family Fast Ethernet NIC
  ATI MOBILITY RADEON 9600/9700 Series graphics card
  ENE CB710 Cardbus Controller
  Realtek AC97 Audio
  TOSHIBA Software Modem (not important)

  Some software are:
  TOSHIBA ConfigFree
  Alps Pointing-device Driver
  ATI Desktop component
  TOSHIBA utilities

  Long ago, I had Satellite M70 that was machine WXP too. It was not supported for Win7 but I installed it to see how it will work. My problem was to find the display driver, but I found somewhere on the net and the machine was OK. I could use it but without specific Toshiba and utility tools.

  Unfortunately on this forum we do have enough information about these updates on old machines. I can only say: install it, test it and post comments.

• How to install Win XP on a Satellite L40 PSL48E?

  What are the steps to install XP?
  Where can I find the driver for this model package?
  Is it mandatory to buy an external floppy drive?

  Hello

  This very easy s boyfriend.

  You must first include the SATA drivers that are part of the Intel Storage Manager.
  You can find it on the European driver Toshiba page.

  You n t need an external USB FDD drive. You can use nLite software.
  It of free software and you should google for more details and where to find these software.
  It would help to understand necessary files of SATA for Win XP disk and create a new CD.
  So finally, you can use this new drive for the installation of Win XP.

  See you soon

• How to install Win 7 on a Win 10 computer which doesn't have a CD player

  I bought a new laptop of Lenovo win 10, but I can't not treat Win 10 so I bought a copy of Win 7 and want to install it but I don't have a CD player.  How to install Win 7?  I tried to look at the oem site but nothing seems to match back to Win 7, they all assume I'm going to Win 10, that I certainly do not.

  Otherwise I'll have to return the laptop because I don't live with Win 10, it takes too long to learn all the new shit and I'm not all media social hype apps that came with it.

  A little guidance would be welcome, please.

  Thank you

  KC

  Post proposed by the facilitator for the appropriate forum placed

  The first thing you need to do is to check if there is no Windows 7 driver for your model of Lenovo.

  I recommend also to dual boot, instead of decommissioning.

  In addition, downgrade rights are limited to systems that are preinstalled with Windows 10 Pro OEM. Other editions need to provide your own disc of Windows 7.

  There are ways you can download and create a bootable copy of the edition of Windows 7 you have.

  Option 1: Microsoft Windows and Office ISO download tool - HeiDoc.net

  then

  If your computer is UEFI, they are normally the systems that come pre-loaded with Windows 8 or later, you need prepare the ISO for such a configuration file or you will receive an error during installation. The USB key must be formatted in FAT32 and use the GPT partitioning scheme. To do this, you must use Rufus, a small tool that you can download for free.

  

  Rufus - credit: Pete bastard/Akeo

  After installing Rufus:

  • Launch it
  • Select the ISO Image
  • Point to the file ISO for Windows 10
  • Check create a disk bootable using
  • Select GPT partitioning to EUFI firmware as the Partition scheme
  • Choose FAT32 NOT NTFS as file system
  • Make sure that your USB in the device list
  • Click Start
  • Close when you are finished

  Learn more about decommissioning:

  How Downgrade Windows preinstalled 10 for Windows 7/8.1

  How: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first (recommended)

• How to install win. 8 64 bits on my IBM Thinkpad T40 32-bit

  How to install win. 8 64-bit ISO on my IBM T 40 Thinkpad 32 bit dvd

  Moved from the installation of XP, set at level and activate Forum.

  To learn more:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_8-windows_install/how-to-migrate-from-32-bit-versions-of-Windows-to/46a5b8f6-5fd3-4C67-9482-4573087480fb

• How to install the driver LAN for Satellite Pro A120

  In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
  The issue that there's no facility to do to complete the installation.

  And theres other question that I need the Ethernet controller

  My laptop was vista operating system installed, but I change and put Windows XP

  Please help me

  Hello

  LAN installation is very easy.
  First of all, you need the correct LAN driver.
  In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

  Once the LAN driver has been downloaded, you will need to decompress.
  Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

  Then finish the installation procedure.

• How to install Win 7 on Satellite P300?

  I have a laptop Toshiba Satellite P300. When I bought it, I had to this topic Vista Edition home premium. Now, I tried to install Win 7.
  I have the DVD of Win 7 Professional but when I want to boot from the DVD win 7 it wouldn t accept and the boot PC always from the hard drive even when I changed it on the BIOS as it doesn t recognize. I tried with another Win 7 DVD to format the hard drive and install Windows 7 as the normal procedure, but Toshiba doesn't recognize any DVD Win 7, it acknowledges that its original DVD system (hddrecovery files that combines the win vista and all the drivers of Toshiba for laptop, as you know).

  So, how to format the pc and install Win 7 (if you run the installer of win 7 on the computer I install Win 7 but I can t pc format and I still keep old files and I put t like) so please help me if you have a solution for that I thank you!

  I installed Win7 on P300 s brother without any problem. I don't understand what the problem with your drive in Win7.
  Are you using the original installation disc for Microsoft?

• Re: Satellite A300 PSAGCA: how to install Win XP as 2nd OS

  Hey any reader for the first time and shows for the first time.
  My comp is the Satellite A300 PSAGCA-02U010

  You 2 questions, hopefully someone can help me with.

  The issue of the first: like many people, I hate Vista.
  How can I run XP as a second OS that don't live my warranty?

  2. the volume level is not very strong (sound) when you watch a DVD etc. I tried different settings, and every time I do I have to restart to take effect, which is a pain that vista is slow to restart. I have downloaded the driver, but noticed that it is exactly the same as what is installed already :(

  See you soon

  > How can I use as a second OS XP who don't live my warranty?
  Installing programs or operating system would not avoid the warranty!
  You can install the Win XP as second OS without fear.

  But before install you anything, I would recommend the Toshiba recovery disc creation!

  With regard to the sound:
  As far as I know the parameters which are changes in the player are not not in trouble. You must increase the volume of every time when you start the software again.
  But have you tested different actors? For example, VLC player is a simple and free tools.
  I recommend to test

• Re: How to install Win XP for Satellite 1800 750 display driver

  How to install the video driver in my pc? Does not include the .exe archives.
  
  The pilot is Trident display Windows XP 4.12.01.2307 driver

  + The message was edited: link removed - too long.

  Hello

  You n t need the exe file.
  You can install the driver through the Device Manager, you must simply point to the folder of the driver you downloaded and Win XP would take the necessary ini and dll files automatically.

• How to install Win XP on Equium P200

  Hi guys,.

  I found a very useful tutorial, how to install windows xp on laptop Equium P200.
  Problem is that when I did everything what in this tutorial (used nlite, made the install xp with sata drivers cd) Win Xp is show error.

  When you boot from the cd, and all the drivers are loaded, it will show me a blue screen saying that installation was arrested for not to damage my pc and its saying that the error is in the pci.sys file...

  The ides what it could be?

  Thanks in advance

  Hello

  I m not 100% sure why this error but I've had an idea.
  Maybe the installed Intel Matrix Storage Manager doesn t support the good chipset.

  I ve towing different versions of the Intel Matrix Storage Manager and both versions support different chipsets.

  Always is it that there are different series Equium P200 which needs different drivers.
  I think you should visit the European driver Toshiba page and must choose the right notebook series! Compare the serial number located at the bottom of the device!

  Then try the installation again.

• How to install win xp pro (upgrade verdion) on a new hard drive

  I have a win 95, 98 and xp - pro upgrade disks and would like to know how to install the OS xp - pro, one a new 80 gig hard drive. I run two other computers with win xp - pro. years, I installed win 3.1 and updated for win 95 and win 98 and then then to xp - pro. Are there more recent methods today to install xp - pro on a new hard drive?

  . Are there more recent methods today to install xp - pro on a new hard drive?

  Hello

  There is no change in the installation of Windows XP mode.

  The only thing to do is to put the XP disk in the CD-ROM and follow the on-screen instructions.

  How to install or upgrade Windows XP

  http://support.Microsoft.com/kb/978307

  Kind regards

• PROTECTED M800-10v: how to install Win XP Pro

  Hello. I'm french, sorry for my bad English

  I protected M800 with vista installed pro.
  I can't install win xp because I have the blue screen.

  Can I install XP?

  Thank you

  Jean-Marc

  Is the BSOD 0x0000007B code?

  You must go into the BIOS and change SATA "Compatibility" or "IDE" mode

  Or, if this option is not available, you should use the F6flpy driver is in the Intel Matrix Storage driver package.