Re-installation of windows: difficult to get hold of an iso

Similar Questions

• After the installation of Windows Vista, I get the error message "" windows/System / * ' file was not found "

  Original title: after the new installation of windows Vista it does not work.

  After the new installation of windows Vista on my laptop Lenovo at startup, it displays "windows/System / *" file could not be found... I also tried to fix.

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  If you continue to have problems with it contact lenovo

  http://www.Lenovo.com/us/en/index.html

• is shaded a d I canProblems installation of windows to date get the error code 80070490, tried to install windows vista from DVD upgrade areanot upgrade I can do?

  Windows update installation problems get code error 80070490, tried to install windows vista from DVD of the upgrade box is greyed out and I can't upgrade, any advise?

  Hi, Eve,.

  First run the preparation tool system update for your version of Windows.

  Start > right click on computer

  Select Properties

  Under system > Type system, you will see the 32 - bit or 64-bit system

  Download the tool for your system (x 86 is 32-bit, x 64 is 64-bit)

  http://support.Microsoft.com/kb/947821

  When finished, restart the update.  If the update fails, you will need to repair Windows.

  Your DVD says recovery?  This is the DVD, you will need to reinstall or repair Windows.

  What is the make and model of your computer.  The manufacturers provide a Recovery Utility in many cases.

  Ex: HP provides a Recovery Manager for their computers

  It is found by clicking Start > all programs > PC Help & Tools

  Click on Recovery Manager

  Follow the prompts on the screen to repair your computer

  How to automatically repair Vista using Startup Repair

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

• While performing a clean installation of Windows Vista, I get to the part "select driver to be installed" but there is no driver. What is going on?

  Select the driver to be installed problem during installation (Vista 32 bit)?

  So, I finally managed to get my office to start the disc because im trying to do a clean install because my family somehow acquiring an infection of Hadily on it. However as soon as I get to the part "select the driver to install" installation my computer comes up with nothing = / I scanned the Boot(x:) et le disque local (c), but it says that there is no drivers are found to install.) I don't understand what is happening? shouldn't the disc have everything you need? I was told "to put versions textmode of my SATA interface on a Flash DRIVE or a CD driver" but I don't know how to do this.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  It will be useful.

• After the installation of Windows Vista, I get this error: winload.exe tries to load a 64-bit application, but this processor is not compatible with the 64-bit mode.

  I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:

  Winload.exe

  Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?

  Thank you

  Ryan

  Hello

  Do a clean install of XP with the XP disk provided by Dell, if you.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.

  They should do this for a small fee.

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Vista installation was able to destroy this option of relocation:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP

  See you soon.

• Will the memory and the new installation of windows 7 to get rid of any exploit hacker

  I bought a new package ultimate single user official windows 7 on CD and I replaced it my memory stick with 4 brand new that I was also getting faulty memory diagnostic.

  How can I be sure that it has removed the activation of pirates feat.
  Also the person who has downloaded the 'bad' windows 7 would be initially he have known that it was a forgery and also be responsible for the pirate feat.
  If this last question is too serious to answer on this forum, then appreciate where I order it.

  I would check whether if you bought fully compatible memory, for example

  http://www.Corsair.com/us/learn_n_explore/

  A clean install of victory would destroy everything on the pc, when you start on the MS cd, early in the process of removing all the scores found, before continuing.

  If you have bad memory win7 cannot install properly

• during the installation of Windows XP, I get this error "the ordinal 410" "urlmon.dll" not found. Is there a way to do anything with XP. I'm in the middle of the installation

  My PC has a virus where it could not display icons, taskbar just shows the background wallpaper... my last resort is to reload XP... so I started and got this error "the ordinal 410" "urlmon.dll" not found.

  Hi Dodamoda,

  Thanks for posting. Do you get this error when starting Internet Explorer or some other place? Also, you said that the last resort was to recharge. Reload you the entire operating system already? Regarding the DLL error that you've published, please follow the article below the link if this problem is when you start Internet Explorer.

  http://support.Microsoft.com/kb/254490

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• During the installation of Windows 7 Ultimate, get error, "the installation program could not use the existing system partition because it does not contain the need free space."

  When installing win7 ultimate, {install} error message indicates "Setup could not use the existing system partition because it does not contain the free space required... I have 500 GB free, ram 4 GB 2.4 ghz quad... any help?"

  If you have any external storage devices such as external hard drive or thumb drive, unplug them, they might interfere with installation.

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

  try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

  Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Cite your version of IE and the full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) during the validation in an IE specific forum or a newsgroup. Please do it in your next reply.

  By "The Internet began" do you mean that you encounter errors Page can not be displayed ?

  Updates have you installed just before this problem started? Have you installed an update of the third-party driver that is offered by Windows Update?

  TIP: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

  Original title: screen saver does not start because MSVCR100.dll was not found

  After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

  ScreenSaver: Photo screensaver.scr - unable to locate component.

  This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

  The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

  Help, please. Thank you.

  Hello

  It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

  But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

• I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Help, please.

  Hello
   
  
  Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
   
  (a) ensure that all laptops the same hardware, the same manufacturer and the same model.
   
  (b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  Warning of the BIOS:
  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  
  (c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS.

• How can I get an installer for Windows Vista drive?

  Need windows on a drive!

  I have an acer aspire 5315 with OEM windows vista Basic. I want to perform a new installation of this version of windows on my laptop that there have been some problems (multiple annoying windows error codes) and want to start over. I have not provided with an installation for windows cd when I bought this laptop a few years again. I have a license for this laptop windows key but not drive! I am able to get one sent me free I paid initially for windows?  Thanks, Mike

  Hello

  Contact Acer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or ACER Alt + F10 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• IM invited to insert a cd with DSC20.msi. I can't find. don't have a cd. Can someone tell me where I can get it. It comes with the installer of windows Error 1316?

  I have a Dell Inspiron 1525 with Windows Vista SP2. I tried to uninstall Dell support Center, but an error message keeps poping up. "Error 1316. A network error occurred trying to read the file C:\Windows\Installer\DSC20.msi. Also get error 1705 when I try to uninstall it. He always tells me to pop in a cd with DSC20.msi. Or file not found. Can someone tell me where the hell I can locate this file. Thank you in advance for any help.

  Hello

  as this is a dell file Dell

  http://support.Dell.com/

  or try the dell support forums

  http://en.community.Dell.com/support-forums/default.aspx