Re: Question on touchpad menu

Similar Questions

• HP Omen: Questions of Touchpad HP Omen

  Hello

  I just bought a new HP omen and it's a great laptop but I have problems with the touchpad.

  I have it configured as I want it in the Control Panel, but I still have questions, specifically around right click. The two questions I have are:

  1. Right-click involuntary. I discovered that this happens when I leave my finger on the touchpad while using a second finger to click. This always results in a right click, which is annoying, because I don't want to remove my hand from the touchpad, whenever I want to click on something
  2. Impossible to do a right click with right click on the button. The right click button only works if I put my finger right in the right corner at the bottom, which is annoying that I'd rather widely that the clicker is shared 50: 50 left and right. Basically, I stop everything and find very precisely the lower right of the touchpad everytime I want to do a right click.

  I can't find solutions to any of these problems online. Can anyone help?

  Kind regards

  Craik

  Hello @Craik ,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked into your question your

  Omen Notebook and mouse not working not properly. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
  
  If you proceed to the section setting of TouchPad pointing the sensitivities it should help solve the problem.
  
  Hope that solves your problem with the mouse and touchpad
  
  Thank you.

• Questions of Touchpad on Satellite A30

  Hi all

  Recently, I sent my Satellite A30 for repairs because the touchpad is dead. Since I had 'fix', his erratic behavior. Sometimes, I lost all the horizontal movement, with only the operation of the vertical direction. Sometimes during a windows session, I lose the feature full touchpad (including the left/right button).

  I also noticed that a fresh windows session allows me to use scrolling (side of the touchpad) and also rear ease in web browsers. However, after a few moments, windows stopss recognizing the scroll and the b/f gestures (even if the touchpad in my tray icon highlights the fact that I use).

  I've updated my ALPS drivers to the latest version, but that didn't fix it.

  I'm guessing that it's a software issue and not a hardware fault as a reboot solves these problems temporarily. I don't know if there is a hardware problem that confuses the software. I have no idea.

  If anyone has any ideas or has experienced this before, please let me know as it's more boring.

  See you soon,.

  Jason

  Hello

  It's not easy to say why this touchpad problem.
  Questions sometimes very strange occur due to overheating. I noticed that if the temperature goes down to the critical level of the operating system stops, the laptop crashes or many strange issues occurs as a malfunction of the touchpad. In your case, I recommend that you check the cooling modules and try to use the vacuum cleaner for cleaning. Maybe it helps.

  The second possibility is that the touchpad has a malfunction. You know, it has been replaced in the past and it is possible that there is something wrong with the hardware.
  You can contact Toshiba service partner and explain the situation after the replacement of touchpad.

  Good luck

• [T420i] Question option Touchpad ' tap and go '.

  Hey guys,.

  I have a problem regarding a specific touchpad settings which always resets automatically after restart. I don't speak of the possibility of scrolling or moving objects with just a tap - I think that this option is called "tap and continue." To keep focus on the selected object you want for a quarter, it is necessary to draw again.

  Painfully, this behavior is not present after a reboot and I mind setting up again and again. I hope you know a solution for this problem.

  Best, Benjamin

  Hi, Benjamin

  You can try to install the latest UltraNav driver and see if that helps your question. The latest driver is the 16.2.19.2 version and can be found here.

  It will be useful,

  Adam

• Question about the menu item displays do not correctly the status of 'active '.

  Hello

  I've reproduced for purposes of training "Influence," tutorial site

  and my questions are the following:

  As you can see on the site

  Homepage 

  (1) the order of top menu contact us, has the same features as the other components (speakers, time and place) - see picture attached.

  However, when the user clicks about us contact.

  the menu item is not barred to the outside like any other.

  I checked the condition of the assets is correct.

  The anchor link is placed on the foot of page, designed on the page A-master separately from the Home Page.

  I tried to place the anchor to the Home Page at the last point before the beginning of footer, but no result.

  (2) also if you do a simple test, you will see that by clicking on the heading "Contact us", the menu Time & Place is highlighted

  and if you click on the 'Top' menu, or if you are in "Time and place" content and you click on 'Top', the 'Speakers' menu is also highlighted.

  Please note that this behavior is also indicated to the site of origin INFLUENCE ...

  What I am doing wrong?

  BR

  Nektarios

  Replied here: https://forums.adobe.com/thread/2063776

• Question to the menu...

  Hello

  I have a question for the menus.

  I have a project where I use the menu widget for a horizontal menu with subpages to some pages in highest level, like this:

  

  In this case, the page of "Untitled 2" would be only to a category. How could prevent the people of the opportunity to click on this page itself, but only to choose from subpages, Untitled 10 and 11?

  Thank you.

  Ulf

  I actually found the answer myself

  In the 'Menu options' chose just "Include page without hyperlink" - that did the trick.

  Ulf

• Two questions about the menu widget

  Hello

  I'm doing a horizontal menu with the menu widget.  I have 2 questions and a photo to refer to:

  A - when I create the menu widget, I want to add a submenu to the menu drop down and be able to establish links with something other than a page of the site.  How do I do that?

  B - there is a page in the menu widget, but I don't want it to be in the widget menu because there is another button on the site that I will use to post a link to this page.  How to keep this page is displayed in the menu widget?

  

  Thank you - guy deaf

  Michael-

  I don't know how to answer your first question, but to your second question, right click on the page when it is in outline view, click the Options Menu, and then click exclude Page Menus.

• Beginner question: UL Nav Menu and text

  OK, I appreciate the input in advance.  Even if I use one book Dreamweaver and online tools like Lynda.com... There are a few questions that I have not found the answer too, or don't know how to phrase my question correctly in a browser search to find the right answer...

  So, my question:

  I used the Spry which are great, but I took the time to learn how to create a Pull Down Menu of a non ordered list and CSS Nav.

  This UL is driven by text in the list... so what to do if you want to create a type of unsorted list Nav menu drop down, but to use only background for the menu nav graphics (i.e. the text is already anchored in the graph from Photoshop or the graph has no text and is just a chart).  Whenever I completely remove the text of a list item, that do list element disappears, which makes sense, but the question of how to create a Nav Menu with only the graphics that will crumble in several levels?

  Is what I ask not a real standard practice and I shouldn't do that?

  If there was a menu of level one, I know that I could use floated just the DIV tags, but since I pull down I don't see how it works in a nested multiple Nav drop-down Menu.

  Again, sorry for the noob question... and I thank you in advance for your answers.

  Whenever I completely remove the text of a list item, that do list element disappears, which makes sense, but the question of how to create a Nav Menu with only the graphics that will crumble in several levels?

• 

It's a perfectly acceptable list item.  And it would be how you do these menus...

If there was a menu of level one, I know that I could use floated just the DIV tags

No need of div not tags, really.  Just floating images and pile them up with margins.

• small question standard dvd menu nav...

  I'm working on a small project right now, it's a concert band. 10 titles, 10 chapters. an hour of time altogether. and I have a 'bonus' of chance from the back stage. now I created a playlist. each song, as well as the bonus feature is his own scenario. I created a playlist for the presentation of the feature, and then I have the pages of chapters, which is where I need help.

  I have 2 pages of Chapter 6 songs on 1, 4 on the other (I didn't like the way it looked with 5 and 5, in comparison to the wallpaper 'background' and such) anywho, I WANT to be able where I click on 1, the song when its done to return to the menu and select the next song, that for each song to the menu. I have this great work. question is, is anyway to set up where she did this if left to play, BUT if you press "next chapter" on the remote control while watching a page of chapter link individual song, it passes to the next logical song? I tried several things, but can't seem to get to do. Still allows for this? DVD allows for this? I thought I had to do...-DVD, but now I don't remember.

  is anyway to set up where it comes from if to play, BUT if you press "next chapter" on the remote control while watching a page of chapter link individual song, it jumps to the next logical song?

  If I click on tell link to 1 song, 1 minute go ' oh, song of evil * skip next chapter * 'it just goes back to the menu.

  As the establishment, no.  I do not know I see it's a big problem: 'Oops, wrong song, next successful chapter, go to the button in the menu for the next song, you play the next song.

  The main alternatives will give place to play all songs once you select one from the menu.

• Questions from the menu bar

  Recently, I opened Firefox and everything is messed up. All my settings were gone. I managed to change some settings back, but now the menu bar does not respond, it's just all in gray. The back button is the same way. The address bar does not even address, or if this is the case, it's a different tab. And all my changes to my settings disappear after I close the program. What exactly happened here?

  1. In the menu bar, click on the help menu, and then select restart with modules disabled... Firefox starts with the Firefox Safe Mode dialog box.
  2. Put a checkbox reset bars of tools and controls and to reset all preferences default Firefox user.
  3. Click make changes and restart

  For more information, you can try to look at the changes to the toolbars and window sizes are not saved , and the Preferences of Firefox reset to troubleshoot and resolve problems.

• Satellite P50 - C - questions mouse Touchpad

  I have a portable P-50 C and since I upgraded to Windows 10, I had problems with my mouse. If the needle touches accidentally any link, it locks automatically, without my volition. It's particularly irritating when I leave just apage unintentionally because the pointer was pointing in this direction. I don't know how to solve this problem. I'm not an expert in computers and want a simple cure for this.
  Thank you all out in advance!
  Sharada

  I have the same laptop with the same problem - I knew not that it was linked to windows 10 but if it is, then it has not been resolved with the last anniversary windows update. Unfortunately the drivers for the touchpad seem to lack the possibility to reduce the sensitivity or disable the tap to click function.

• Satellite 5200: Question on TouchPad scroll function

  My Satellite 5200 Series has a scroll wheel PHYSICS to the title of the two touchpad buttons 'the mouse'. I found a useful feature heavily but cannot find all the current models that have preserved it.

  It was rejected?

  Is there another way to scroll with newer machines?

  I would rather not add an external mouse because it blocks a precious USB port AND I actually use my laptop outside on my KNEES.

  Hi Tatterdemalion,

  Most modern laptops using a touch pad have a scrolling function software (which can be disabled if you wish) to control automatic scrolling. This is very useful for navigation text in Word documents or web pages etc., the technique (when enabled) is to set the top left or right of the touchpad to 'activate' and by touching this area temporarily, it will change the pointer of the foam to indicate the auto scroll option. Then only, drag the pointer slightly down and the screen starts to scroll until you tap the key again.

  A manual scroll mechanism is also available and can be used simply by stroking the right side of the touchpad (down to scroll down and up to scroll to the top) and the bottom of the touchpad to scroll left and right.

  I find these features useful, but I know other people who find them extremely irritating. It is useful to check.

  Kind regards

• Questions of Touchpad on Satellite P10-304

  Hello

  Recently, my touchpad started to malfunction. If I move my finger on it constantly when starting it works fine under windows, but inactivity for a second round causes freeze it. If I close and then restart apoint.exe, it works as long as there is a constant activity on the pavement.

  First of all, I uninstalled the drivers, then installed the latest versions. This does not solve the problem. Then, rather excessively I formatted the hard drive, the reinstalled windows and drivers, it does not solve the problem.

  I would say that it was clearly a hardware failure, but it works perfectly, as long as there is a constant activity, and when it does not freeze, restart apoint.exe sorts it until the next idle!

  Help, please

  Hello

  I think it would be only a malfunction of the equipment.
  After the new installation of operating system and drivers of Tosh the touchpad should be activated without touching them.

  But what of the function FN + F9?
  The touchpad works if you select or clear the FN + F9 key?
  Please consult the

• Questions of Touchpad on Satellite A100

  Hi all,

  My name is Bill, and I bought a Satellite A100 6 months.

  I am facing a strange problem with my touchpad. More precisely, the right button does not respond. Sometimes it automatically snaps and other time she made a left click unlike my settings that I put to right click.

  Usually, I use a USB external mouse and I do my job all of a sudden the right button is clicked without clicking.

  The most interesting is that I sent my laptop to my local service and they had replaced the touchpad with a new, but after a while (about 1 month) the problem reappears.

  Can - what someone knows something about this? I gather that maybe the motherboard is responsible, but I'm not sure.

  I want to note that I checked almost anything on software problems (I used the recovery CD, I installed new drivers for touchpad, I watched updated touchpad and so on)

  I think I'm very unlucky.

  Kind regards

  Bill

  Hello

  a solution would be maybe to send your machine to your servicepartner once again and to quote the problem persists.
  If they ask you, then tell you think so it may be something with the main card. Then they will check it properly.

  :)

  You know, if you have already checked everything, this may be a hardware problem.

  Welcome them

• Satellite C-50-questions of TouchPad

  Hello world.

  Yesterday I bought a brand-new C50 of Satellite. Everything works fine, except the TouchPad allow me to scroll. Time scrolling with two fingers and a finger on the side do not work. I tried to update the drivers etc, but apparently they are up-to-date. I don't know what else to do. It's really annoying.

  Thanks in advance!

  Hello

  Have you checked all the settings and options of the touchpad?
  Please do. try changing different parameters, including the option of scrolling and check the functionality of the touchpad.