Re: Recover the Tecra A11 - H11

Similar Questions

• Support for the maximum RAM, the Tecra A11

  Hey the Toshiba Experts,

  If I buy a Toshiba Tecra A11 PTSE1A - 07G 005, model and on the site it says it's only 8 GB expandable. I wonder with a flash BIOS or the firmware update, if it could support 16GB?

  Possible or impossible?

  Is not possible. It does not depend on the version of the BIOS, and the BIOS update will not change anything.

• Re: Unable to run the HARD drive recovery in the Tecra A11

  My laptop is a TECRA A11 - 1 8 PTSE1E-07-J044AR with processor i5, 4 GB RAM and running Windows 7 64 bit. Recently I had a problem with one of the user (desktop profile) profiles and has not been able to create one despite several attempts, so decided to reformat to the factory settings. But nevertheless I tried the procedure, he went only up to the Boot Manager settings. After that, the warning screen never comes to the top and the laptop eventually normal startup.

  So I decided to ignore the recovery of HARD drive and installed Windows 7 32 bit through a CD of formatting of the main partition to C: drive, but keeping the recovery partition, just in case. Now, even if Windows installed fine, however, none of the drivers (LAN, WiFi, video, sound, etc.) are installed.

  Now my questions are:

  1 can I reinstall my old Windows 64 bit through the recovery of HARD drive? If so, how?

  2. can I continue with the newly installed 32-bit Windows and just install all the necessary drivers and utils from Toshiba? If so, where the sources?

  Would be grateful for any help.

  > 1. Can I reinstall my old Windows 64 bit through the recovery of HARD drive? If so, how?
  After the clean version of the OS that it is not possible to install the recovery image using recovery option of HARD drive due to lack of repair my option computer start-up advanced options (F8 at startup).
  You can install recovery using recovery DVDs image only. Did you create this recovery disk?
  > 2. I can continue with the newly installed 32-bit Windows and just install all the necessary drivers and > Toshiba utils? If so, where the sources?
  Of course you can do it. If Win7 32-bit is supported for this laptop model all the necessary drivers, the tools and the utilities that you can find on the download page of Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• Windows 7 64 bit does not properly close the Tecra A11

  Last week my laptop Tecra A11 ceased to close properly. Windows 7 64 bit stops, the screen goes black but the power of the computer turns off is no longer. Power of the computer stops if I hold down the power button.

  I'm running a Toshiba Express Port Replicator to work and a Toshiba Dynadock U at home. The problem occurs on both sites. I have scanned for viruses, update Windows and defragmented computer, but none of these things had no effect on the problem.

  Anyone know how I can fix this frustrating problem?

  The same thing happens when the laptop is not connected to two external devices?
  Have you installed any additional software that may be responsible for this?

  Have you noticed the same problem as the use of the standby or hibernation mode?

• Not able to recover the Tecra A6 - installation is incomplete

  I'm 'attempt' on the restore disc a Tecra A6 with the restoration.
  Whenever I do this it fails and returns with a message "installation is incomplete - please re-run Setup" or tells me that is missing windows files and does not start correctly.

  I ran a utility for debugging on a boot cd and am sure that there is nothing wrong on the HARD drive...

  Someone at - it an idea on how to proceed?
  Or can someone advise if we can buy a new restore disc if you think it should be corrupted?

  Thank you very much

  Keith

  I can't say for sure the disc is damaged, but if some of the data can not be read and load correctly, I can imagine there is a problem with the disc.

  Try to contact the nearest authorized maintainer and ask if they can order new Toshiba recovery media for you.

• Tecra A11-125 - technical specification on the integrated chip

  Hello

  Where can I find more info for the Tecra A11-125? Specifically, I need to know the SATA standard for the chip: is Sata150 and Sata300?

  Thank you

  Oliver

  Hello

  I found an article on this laptop:

  http://www.notebookcheck.com/test-Toshiba-Tecra-A11-125-notebook.28130.0.html

  According to her, it is equipped with motherboard Intel HM55

  http://www.Intel.com/products/Notebook/chipsets/HM55/HM55-overview.htm

• Tecra A11 and BACK version of Symantec Ghost

  Hello

  Someone had a little luck in getting the BACK of Symantec Ghost version to work on the Tecra A11? If yes what version do you use?
  My problem is not keyboard in version 11.0.1. Mouse mat is ok. I have the KB/mouse USB Legacy emulation enabled in BIOS.

  And Yes, I know I should use ghost32 instead, but I really do not have to make that change right now :)

  What operating system is preinstalled on your Tecra?

• Tecra A11 - LED backlight problem

  I have great pain in my eyes after a day of working with Tecra A11 BIOS V1.7 = BIOS update. Wenn I bought it there was 1.4 BIOS the same problem with the eyes, LED backlight killing my eyes, a lot of pain after a day's work. V1.5 and 1.6 are much better (no pain) but new BIOS 1.7 is the same eye-killer than 1.4.

  Who will help me? Users of this forum?

  I want the people of Toshiba to help me, they sell the product ready 1/2, absolutely bad work! No contacts to Toshiba just this forum. Toshiba is interested in my problem with its Tecra A11 laptop bad and stupid BIOS updates? I'm really angry, never had such problems with laptop so much. So excuse my emoutions that I'm starting to hate Toshiba for the very bad experience with this Tecra A11. Why some users of this forum should help me? I paid a lot of money to Toshiba, so I want that people of the Toshiba to tell me what they do in their BIOS updates, silly kill my eyes with LCD backlighting. How many BIOS updates will be needed to make the Tecra A11 work correctly for 800 EUROS? I'll never buy anything from Toshiba.

  Hi dusanpov,

  First of all: cool! Nobody is perfect and that these things can happen that something does not work correctly.

  I put t know what problems you have with LED backlight, but a more detailed description would be nice. A friend of me also uses the Tecra A11 but it didn t tell me questions so I think this laptop works very well.

  And I think that it of normal that there is no contact with Toshiba and you won't get any help from Toshiba because you will need to contact a * authorized service provider *. If you have a problem with your laptop, connect with these guys here. They can repair the laptop and it's free if your laptop is under warranty. On the Toshiba site, you can find a list of them.
  Check this box!

  Finally, and especially if you have noticed that with an older version of BIOS, that everything works correctly, you can get this older version of a service as well. As you can see, it might be useful to communicate with these guys here.

  If you have any other questions, just after again! :)

• Tecra A11 - 005 00K for SCCM OSD mass storage driver

  I need to know the Tecra A11 mass storage driver so that I can laydown XP WIM of images using the SCCM task sequence. Well, any help would be appeciated.

  I tried the driver Intel ESB2 SATA AHCI Controller but need the correct model in the pilot. (IE. Intel ICH7R/DH SATA AHCI Controller)

  Thank you

  You can get the provider and the device for me id?

  You can get this by going to your device manager, the device in question, right-click, select Properties, click details and select the hardware ID from the drop-down...

  copy beyond what is inside of her and post here and I'll see what I can do...

• Tecra A11 & Express Port Replicator II - USB problems

  Hello

  I'm having a problem with a port replicator that I simple couldn't have resolved for months. I'll try to explain this as best I can.

  We have a Tecra A11, which seems to work fine running on Windows 7 Professional. When the Tecra A11 is pluged in an Express Port Replicator 2, not USB ports in the port replicator's work at all. Very good cell phone fees and the LAN switches on the replicator fine, but the USB ports simly does not work under any circumstances. It would also be interesting to note that the green light next to the "eject" button lights never really.

  I downloaded and installed the latest series driver for Windows 7 from the Toshiba support page which has no effect. We had 2 replacements for Toshiba because they also agreed that the previous, we had were not woring correctly, but this obviously was not the case because we still have the same problem with our 3rd unit. The Tecra A11 was sent back to Toshiba with case notes clearly describing the question, and he was sent to us "no fault found".

  Unfortunately, we don't have any other laptops to test on the port replicator. but I'm seriously suspect that the problem lies in the laptop, rather than the port replicator. For any idea or suggestion will be greatly appreciated.

  Kind regards

  Steve.

  Hello

  According to your message, you are not sure if the problem is related to the defective laptop Tecra or express port replicator.
  Hmm theoretically the problem might be related to defective express port replicator or Tecra.

  If found some information on the USB ports and the repliators port:

  + Make sure that the element of Legacy USB in the BIOS emulation is set to "Enabled". This feature only works for the keyboard and mouse. Also note that the keyboard and mouse must be connected before you start the computer. A USB mouse, keyboard or the floppy drive connected to the Port Replicator via any other connection that a hub of the first level, will not work until the operating system has started. +

  I also recommend to check the version of the BIOS; If the most recent BIOS is available, then you need to update this

• Tecra A11 - Compatible to express port replicator?

  Hey people, does anyone know if a Tecra A11 can be used with version PA3508E of the Express duplicator?

  Cannot afford the new while I'm between jobs, and I saw one of these 2nd hand on ebay.

  Hey

  Replicator Port Express is not compatible Tecra A11 and Tecra A11, you use the Port Replicator II with PA3680E-1PRP part number specifications.

  The second version of this port replicator is designed for these new models such as the Tecra A11 :)

• Tecra A11-13 q - are there drivers for Windows 7 32 bit

  Hello

  I want to buy portable (as in the subject).
  In the shop, there are only 64-bit Windows 7.

  My question - is there drivers for Windows 7 32-bit system if I want to change the system?
  Or I have to use only 64 - bit.

  And another. I found on the web that models the Tecra A11 form are - PTSE4E, PTSE1E, PTSE0E and in stores there are models such as 13 q, q 11, 131? who's who?

  Hello

  Yes, it seems that Win 7 32-bit drivers are available on the European driver Toshiba page.
  Check just.

  But even if the drivers are not available, you can install the Win 7 32-bit operating system.
  In most cases the Win 7 OS devices automatically recognize and install the common drivers in very rare cases, you will need to get the drivers on 3 third-party pages

  But as I said, it seems that the 32-bit drivers are released

  Welcome them

• External audio device for Tecra A11 - 11H

  Although the Tecra A11 - 11 sound better than most laptops, I would definitely come back to the full sound quality.
  Without any audio output the possibilities seem very limited.
  USB speakers seem to be either very low powered or high-powered, expensive, or boom-box.

  My daughter, a Windows user, has one of those gadgets
  http://www.cclonline.com/product-info.asp?product_id=57743&TID=gsearch
  with its 5.1 speakers and the result is really good (and I already have the same set of 5.1 speakers, currently unused).
  The problem is of course that Creative do not cooperate with the world of SILK.

  Does anyone know of a similar product that works well with Linux?

  There is in alsa:
  EDIROL UA-1000 and UA - 101
  Tascam USB Audio/MIDI ?
  ? interfaces or controllers US-122, US-224 and US-428
  Native Instruments RigKontrol2 ?
  ? * Native Instruments RigKontrol3 ?
  ? * Native Instruments Kore Controller ?
  ? * Native Instruments Kore Controller 2 ?
  ? * Native Instruments Audio Kontrol 1 ?
  ? * Native Instruments Audio 2 DJ ?
  ? * Native Instruments Audio 4 DJ ?
  ? * Native Instruments Audio 8 DJ ?
  ? * Native Instruments Guitar Rig Session IO?
  ? * Native Instruments Guitar Rig mobile ?
  ? * Native Instruments Traktor Kontrol X 1
  all this must work well...

• Tecra A11 won't recover/restart of sleep

  Hi guys,.

  I have a TECRA A11 model no - PTSE1A - 00M 005.
  It has Windows 7 Professional 64 bit and is up-to-date on all windows update.

  When I click the power button and send it to sleep (power button / stop is set to sleep) or close the cover and he goes to sleep, I can't click the power button again and recover or restart from sleep. It doesn't do anything.
  Power, power sector and battery plug lights up green but the hard drive does not start, or I do not see the hard drive Led light up.
  I have to keep the power button for 5 seconds to stop the laptop, and then restart it.

  In addition to this, I also have times when the computer is turned off correctly, but when I go to start it, it won't start. As usual the left 3 lights, but the hard drive light does not illuminate. The fan starts, but the computer will not start. I have to press the power button again for 5 seconds for the computer, close and then restart. The second time round it always starts.

  This problem has me baffled for a while now and I can't find a solution for this.
  Any help would be much appreciated.

  Thank you

  Since when did you notice this kind of behavior?

  Try please set the BIOS to default settings and check the startup problem.

  FN + F3 to put the laptop into sleep mode, close the cover and after a few minutes open the cover and press the power button. The same problem happens again?

• Tecra A11 - 1EG - cannot be accessed after the supervisor setting BIOS password

  Hello, I would like to know if anyone can help?

  We have started to put a supervisor on our laptop Tecra A11 password so that our students can not set passwords on the hard drive, etc.

  To enter the BIOS and set a BIOS password, press us F2 that the machine starts.
  Then we go to the security option, then supervisor password.
  After entering the password we use twice, press us F10 to save etc.

  The machine starts ok and will windows smoothly.

  The problem we have now, is that we cannot go back into the bios at all.
  As machine starts support us on the "F2" key as before, but unlike previously the screen remains white and the "Toshiba leading Innovation > ' screen no longer appears."

  If we keep our finger on the F' key or continue pressing the laptop restarts just without ever get to the BIOS screen where I guess that get us ask the supervisor password that we set earlier?

  Is there another key, that we should be pressing that start the laptop?

  I would add that we have added a password of supervisor for the screen of security BIOS on three of our laptops and all three have the same problem.

  Thank you

  Steve

  I think this should be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

  In some cases, you need to press the "INS" in Toshiba logo appears.

  Then appears a prompt for the password for the supervisor and if the password is certified then the BIOS could be entered by pressing the "F2" key