Re: Remote control Quosmio G30 - 161 & IR receiver

Similar Questions

• Qosmio G30-161: cannot receive the signals of TV in MCE

  I recently bought the Qosmio G30-161 and have problems with watching TV via the media library. I get an error message that there is no signal. However another TV tuner I installed separately I'm not having any problems.

  I read somewhere that this could be solved by installing the last disc of tv tuner. If anyone can confirm this? If Yes, when I try to download the player from Toshiba online support, which comes in a file zip, after extracting it I don't see an option to install it.

  Thank you

  The second TV tuner installed on your Qosmio?
  Have you tested to receive TV signals without the second tuner but only with Qosmio internal tuner?

• Need help with my Toshiba remote control and receiver for Qosmio G30 161

  Hi all

  I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.

  I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.

  Also to confirm that I'm under addition of Windows XP MCE.

  Anthony Worlock

  Hello

  This remote will work, if you use it without any special drivers and special software, only in the Media Center.

  But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.

  Please try this tool and check if it works.

  By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)

  Welcome them

• No requireed receiver remote control in Vista - Qosmio G30

  The G30 Vista versions do not need of the separate remote receiver, using the built-in IR receiver on the front panel.

  Update an Qosmio XP MCE to Vista simlilarly would not require the remote receiver separated, and it should be the Vista version of the remote control?

  Hello

  As far as I know the face before of the Qosmio G30-103 (it is a unit of XP MCE) for computer laptop, you'll find the windows of the infrared receiver and this sensor is able to receive signals from the remote control. BUT this is only supported using the Qosmio Player!
  For MCE, you will need the remote control receiver extra with a USB connector that usually comes with the laptop.

  Good bye

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• Toshiba 42Z3030D TV not receive signals from the remote control

  I can't use any (Toshiba or the distance from Sky TV) remote on my TV.

  Everything works on the TV when I use the buttons on the side of the TV but the TV does not seem to receive all signals from remote control.

  I changed the batteries in the remotes, and it still does not work.

  Can anyone help please?

  Model: Toshiba 42Z3030D TV

  T couldn't be possible that your TV remote is malfunctioning?
  Maybe you need to replace.

• do I have to set my remote control receiver only?

  I have a STR-K790 receiver. I need the codes for a universal remote, unless I can fix manully

  Hi Stooney,

  You will need to use a remote control to set a radio station in the receiver STR-K790 system.

  Is the universal remote you are talking about is branded Sony? If you use a universal remote control from Sony, the control code for Sony receiver is 01 or 001. However, we are unable to provide support for remote controls designed by other manufacturers. Manufacturers may set different code numbers in their universal remote controls to identify the infrared (IR) signal of a Sony product. Thus, the code number used to operate a Sony product in one remote can be different from the one used by another.

  For more information on the planning of a third-party remote control, contact the manufacturer of the remote control.

  If my post answered your question, please mark it as an "accepted Solution".

• Receiving IR of HP and MC remote control does not work after upgrading Vista to Windows 7.

  I upgraded a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Home Premium (32 bit) respectively of Vista and an HP HDX 18 and found that the small remote controls supplied with the PC HP no longer work the IR receiver to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in the section of the Human Interface of the HD-18 referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.

  I can not find a model of dv9249 specifically on the hp site. I found the dv9200
  series. you have a link to your specific model?
   
  in all cases, try to remove the Device Manager devices and if requested if you want
  to remove drivers, select Yes. then make a stop at cold and then turn it on.
  Finally, see
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Ene-CIR-receiver-conflict-in-Windows-7/TD-p/161289
   
  link of a person found an alternative driver that solves the problem) on the page
  (See above).
   
  It seems that several HP models affected related issues.
   
  If this does not resolve the problem, suggest that also posting in the forums of HP.
   
   
   
  On Saturday, January 15, 2011 19:12:50 + 0000, shanewc wrote:
   
  > I upgraded a HP HDX 18 and a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Vista Home Premium (32 bit) respectively and have found that the small remote controls supplied with the PC HP do work more the receiver IR to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in humans
  Interface
  > HD-18 section referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Other remote controls for 4 Apple tv

  Hello

  I recently got a 4th gen apple tv.

  I find the new remote control very difficult being that I'm visuakky with impaired faculties.

  Does anyone know if the offer from apple or a sell a more tactile remote control like the old TV one of its customers with disabilities

  I live in the United Kingdom

  Thank you

  In my view, it is possible to use the previous remotes ATV with ATV 4. Of course, you'll be without Siri and the trackpad, but it is very convenient.

  You can also form a multisystem remote sends the commands of the ATV. Note that the distance of Siri transmitted via bluetooth, but ATV 4 has an IR receiver also.

  I use my remote TV with HDMI-CEC, allowed on television. The volume must be disabled on the ATV. It works by sending commands via the HDMI cable connecting ATV to all. It is intended to allow the control of a DVD player with the TV remote control. The direction of the arrow keys and enter replace the trackpad button, while back works as a Menu. Haven't found a substitute for the Home button, however. Now, HDMI-CEC varies according to each model and manufacturer, but you may find that you already have the remote you are looking for. On your game, HDMI-CEC will be called * Net or * link; still another denomination.

• Qosmio F20-132: Question on the use of the remote control

  Hi ppl, I just read the manual of my laptop and I realized something that I didn't realize before

  I can use my remote control without using the "infrared adapter" using the USB connection, but it does not work inside the Win XP MCE, but I can use it to turn on my laptop and off and use other features, I will try in the future to use some other aplications with the remote control. I guess many of you guys realized it when you bought your laptop, but I said at the beginning when I opened the package ' what the hell? remote control... but I really need this adapter? Sherazade, that sucks.

  by the way someone is using the remote control with other applications (such as ahead nero, chis tv, or linux inside)?

  Hello

  I downloaded the manual for this unit, and according to the information of the remote control receiver is required if you want to use the MCE Remote control.

  In addition, remote controls USB only works with Win MCE and so cannot be used directly with Qosmio Player
  Additional some application programs can not supported control functions remotely.

• Apple TV (3rd generation) remote control suddenly stopped working

  I used aluminum remote on my 3rd generation Apple TV for years without a single issue.  Then last night, after working fine most of the evening, it simply stopped working.  The first thing I did was to get the distance within two feet of the Apple TV, and then I was able to make it work.  To me, this indicates a battery is weakening, so I replaced it.  Same problem: Apple TV does not remotely, unless I get very, very close.  Just in case, I got a new battery, I tried a second.  Same question.

  I did a bit of digging in the community forum, and here's what I've tried:

  -restarted successfully the Apple TV via the software and then again just unplug the power cord and wait 10 seconds, but the problem persists.

  -successfully paired and re-paired remote control, but the problem persists.

  ATV shows a solid light when I push buttons, unless I come to this beach to two feet and then it flashes once as her answers ATV.

  I have looked on the IR through the camera of my iphone, but don't see any red flashes... and yet the ATV receives the signal from the remote control if it is close enough.

  Curiously, as part of my diagnosis, I noticed that the "UP" button had become insensitive, even from the beach which work the other buttons.

  I have not dropped the remote or mistreated it somehow, so can't see why it would break suddenly without reason.

  I'm puzzled.

  Your troubleshooting sound research.

  I would buy a new remote from Apple and try it.  They are $19.00.  If she is doing the same, the receiver IR of the ATC is responsible and return the new remote control within 14 days for a full refund.

  If it works keep the remote control.

• Application or remote control for SRS - X 11

  I love this little speaker. Such sound rich and vibrating a small unit. However, I realized that something was missing. I hung it on a portable turntable across the room. When I received a phone call on my landline, I had to walk across the room to lower the volume. I was wondering if there is an application that I can install on my cell phone or if there is a bluetooth remote for this speaker?

  Thank you

  Hi Salbertarose,

  Welcome to the community of Sony!

  Sorry for the late reply. No remote control and app are available for this Bluetooth speaker, however, this Chamber has a Bluetooth AVRCP profile that leaves your Bluetooth device control media playback.

  It will only allow you Select music and read by using your Bluetooth device. General controls like the volume control and turn the speaker and the cannot make the paired Bluetooth device.

  I hope this helps.

  Best regards

  -Mark

  If this answers your question, please mark it as "accept as a solution.

• Sony Bravia 4 K Ultra HD model XBR-43X830C & remote control RCC-TX100U - don't pair / work! Help!

  I bought (via Internet) remote control Sony RMF-TX100U touch pad to pair upward with my Ultra model HD Bravia Sony 4K 43 '' TV XBR-43X830C, since the remote control of the touchpad does not come with this TV in particular. I followed all THE procedures of paved remote reset touch that is to remove the batteries, batteries, hold down the respective buttons and receive the flashing red light (twice) on the remote control, I did. Also, I did reset the TV rather than unplugging it. On television, I went to settings, remote and followed the onscreen but which are basically press and hold the Volume - button and then press the "microphone" button while continuing to hold down the key, - Volume for three seconds, remote pointed at the IR receiver TV. I did it over and over again and nothing happens! I find NO Google search solutions to this problem. Can anyone advise of alternatives to get this remote touchpad to play nice with my Sony TV? I'm assuming that this remote is COMPATIBLE with this particular set? Some say yes, some say no. Please advise. Any help will be greatly appreciated. Thank you in advance!

  Doc technical marketing for your TV on the Sony site.

  https://docs.Sony.com/release//specs/XBR43X830C_mksp.PDF

  Shows:

  Optional accessories

  Remote control Touchpad (RCC-TX100U)

  Cable MHL (DLC-MC20)

  Subwoofer (SWFBR100) wireless

  4 K Media Player (FMP - X 10 (for the USA. only))

  Should work.

  Try to make a power-pull reboot... turn TV off, draw power for a minute, plug in and restart.

  Put different batteries in the remote control.

  Try again.

  If it doesn't work, distance could be faulty.

• Remote control

  I had a remote that came with the computer, but I can't seem to find how to make it work, all the batteries and everything works.  Send an email to [email protected] that the version or the hp's got is p6-065uk

  Hello

  I'm not 065uk , but I think that your machine is a 2065uk. The remote control should come with an IR receiver. You must plug the RECEIVER on #2 and both of them is the TV tuner (you may need an antenna for port #1 too). It can be used like any TV remote.

  

  1 - TV (air port)

• Tecra 750: Question on the infrared remote control and TV

  Hello

  I wonder if anyone can help. I have an old Tecra 750 which I use as a sound system to play my MP3 collection. It has an infrared detector on it and I was wondering if it is possible to use this to receive a TV remote control IR, so I can use a remote control to navigate through my audio files. Does anyone know how or where I could find how? Y at - it a freeware to help maybe? Is it still possible?

  Thank you!

  Hello

  The computer uses infrared IRDA, and it is not compatible with the type of infra-red used by normal remote controls.

  You could get an external infrared remote control which must be plugged into the USB port.