Re: Satellite A - alarm after an intallation of USB modem

Similar Questions

• Satellite L500-1WP: after Win8.1 upgrade USB 3.0 drive external does not work

  Satellite L500-1WP

  After updating Windows 8 to 8.1 my drive USB 3.0 external do not work.
  Windows message: "device not recognized".

  Hello

  I guess you are talking about an external HDD that supports USB 3.0 standard.
  Right?

  Have you tried to connect to another USB port external HARD drive?
  The USB ports work correctly in relation to other USB devices?

  The USB 3.0 device supports Win 8.1?

  You should check this.

• Satellite A300-14 - after Windows 7 installation no modem not recognized

  Hey guys, how are you?

  Unfortunately, I discovered today that the Modem is installed with the drivers on Windows Vista 32-bit, but does not work. However, I formatted my PC and installed Windows 7 Ultimate 64 bit and: no modems at all! I don't know why Device Manager is unable to see and my capture device.

  I need help guys.

  Thank you.

  My laptop is: Toshiba Satellite A300-14

  Hi dr.anm,

  Have you tried to reinstall the modem driver? I checked the Web from Toshiba site and I can find a driver of modem for Windows 7:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satellite A100-405: after ranging from sleep USB devices will work

  When I bought my laptop about a month ago, I received a message on the peek at the energy of usb hub (I hope it's the right translation, because I have a Dutch version) whenever I have start from standby mode.
  On the windows site, he said that you can turn off this message, so I did.
  But now when I start the laptop to sleep, my usb devices no longer work.

  Can someone please help me solve this problem. Or can someone tell me if it is a hardware problem that can't be solved by returning the laptop for Toshiba?

  Hello

  You must update the BIOS again! There is a new version 5.20 !

  This should fix any problems that may occur after the update to version 5.10 of Bios.

  Please come back and to report if this procedure has helped or not! Good bye

• Satellite A300 starts after Vista update

  Hello everyone!

  I had a problem with my Satellite A300. After installing Vista updates laptop is restart automatically, so it is not commissioning and screan is black, but buttons is the lighting, the cooler works.

  You have a solution to this problem?

  Hello

  Remove the battery, disconnect the adapter and wait for about 30 minutes.
  Then reconnect both parties and try to turn on the laptop.

  Check it out!

• Satellite M110: The USB Modem broadband wireless fails to install

  Hi all

  I have a satellite M110 machine under XP SP3.

  I've tried two different brands of wireless USB modems. The two installation the corectly modem drivers and Device Manager shows this. However, pilots of Port of Coms do not install. The installation wizard displays the message "driver did not install correctly, Access is denied."

  Modem providers cannot explain failure given that the modems will work on my desktop machine (vista) without any questions just plug-and-play so to speak.

  I tried-

  (1) disable all anitvirus programs and firewalls.
  (2) deactivation or deletion of all other modems and internet connections
  (3) update BIOS
  (4) restart completed after all the above steps
  (5) verified all the drivers are the latest and the greatest part up to date.

  Returning the status 'out of box' re-loading of windows is not an option I've run a number of programs on my machine that are no longer available in the format that I use in my business. A suggestion was made by a tech Windows registry values are incorrect and are blocking the installation?

  You said, that the Wireless USB modem works on your desktop with Vista. Modems supported by Windows XP or Windows XP SP3?
  I would like to do a downgrade to SP2.

  In addition, I think that the best way would be a reinstall of Windows. If it s not an option, try it on another HARD drive in the laptop.
  You don't, so no risk of losing your data.

• Satellite L300 - USB modem now reported as unavailable

  I have a laptop Satellite L300, of Vista / Factory - I use a USB Modem to connect to the internet (this usb modem worked perfectly on the laptop until recently and still works perfectly on my PC - so not defective)

  I now receive messages (all 3 usb ports) that State the: the modem we unavailable

  Other usb devices IE mouse, keydrive etc seem to be fine

  I uninstalled the drivers USB, rebooted, checked for hardware changes and rebooted. But still does not connect to the internet.

  Does anyone have a solution?

  Hi Debzs,

  Can you try to remove the modem drivers, please? After that, restart your computer and install the latest drivers for modem manufacturing.
  Check this box!

  Also if other devices are working properly, theoretically it could be a hardware failure on your modem :(

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support

• I have sporadic outages during anywhere from 1 to 5 minutes.  Everything started after I bought a new modem. TWC said, of course, that the modem is fine.  Any ideas?

  I have sporadic outages during anywhere from 1 to 5 minutes.  Everything started after I bought a new modem. TWC said, of course, that the modem is fine.  Any ideas?

  TWC does not yet support some routers, I hope they will be soon.

• Satellite M645 - Hang with USB modem

  Need help, my Satellite M645 (PSMPML - 00H 003) always hang using with USB specially if you use USB modem.

  Help

  Hey Buddy,

  Can you post more information about this behavior? The entire notebook to hang or freeze if you connect the USB modem? Is it so if you connect a USB mouse or a USB?

  What operating system is currently installed?

  If you have USB problems I recommend an update of the chipset driver. Have you ever done this?

• Satellite U500 - problem with Windows 7 and HSDPA USB modem

  Hello
  My wife recently purchased a Toshiba Satellite U500, that came pre-installed with Windows 7 64-bit.

  A few days later, I bought a modem high-speed HSDPA USB by Alcatel. The problem started immediately that we plugged the modem, that drivers would not install.
  Then I went to the Web of Alcatel site and found the drivers for windows 7 for her. But then we hit another road block since now the drivers are installed and it does not detect the modem, but whenever we try to connect to the internet, screen flickers at the connection for a moment and then disconnects again.

  I found cela a lil strange so I tried to connect using my own pc which has a 32-bit Windows 7 and it works fine there.
  It is the same for a machine that still had Windows XP. Makes me think its something to do with 64-bit Windows 7 itself. Could someone help please?

  Thank you and best regards.

  I don't think that someone here can help you with this problem. You will be very happy if someone on this forum has exactly the same model of laptop including same USB modem.

  In my opinion, you have two options: either you can clarify this point with the support of Alcatel (they have enough experience with own products) or with people from the nearest Toshiba service provider service.

  Have you tried to test the features with the Win7 32-bit version?

• Satellite L505-112 - 31 error code in device USB modem Manager

  I have a USB stick modem: Huawei e172. I downloaded the latest drivers for Windows 7 64 bit. I have a Nokia n95 with firmaware update to version 30 and the latest drivers...

  Is causing me this problem in Windows 7:
  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  To start I have the problem with the huawei e172. After the update of the Nokia n95, I have the same problem with this phone.

  Excuse me for my English but I'm from the Italy.
  Technical support Microsoft tell me that the problem is on the Toshiba Windows 7. In fact, if I try the modem usb stick on another pc with Windows 7 64 bit it works fine.

  Hello

  It's really hard to say what causes this problem on your laptop. Do you use the same drivers on the other PC?

  Are you running the factory settings or you have installed your own version?

  In your case, I'll try to update the chipset drivers on and BIOS. The two you can find on the Toshiba site.

  Alternative you should contact the manufacture of your USB modem. Maybe they can tell you more

• USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  Hi ahmedman_10,

  ·         You follow the steps in the article of my previous answer?

  Follow these steps in my previous answer and at the same time this article, follow these methods.

  Method 1: Follow the steps in the article.

  USB port may stop working after you remove or insert a USB device

  Method 2: Update the latest drivers for chipset.

  How to manage devices in Windows XP

  For reference:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

• Windows 7 x 64"looking for preconfigured folders' 10-20 minutes after the base peripheral USB pluging

  As in the question.

  Windows 7 x 64 'preconfigured search folders' for 10-20 minutes after pluging base peripheral USB - flash stick, mouse, keyboard.
  The installation of the drivers is displayed.
  The small circles looking for minutes and minutes.
  Then the message becomes - installation of the unit
  It lasts still minutes (5 to 10 or more)
  At the end some time, that the device is installed sometimes it fails.
  If I unplug the unit and plug it into another USB port - all again.
  During the whole process, the computer becomes very slow and unusable.
  The Task Manager shows CPU idle but there is no update on the user interface, new programs may not start.
  When the end of the installation then it catches up and everything opens and update with a normal speed.

  I have the same problem as Windows 7 Ultimate SP1.

  If a driver online is available for a USB device, it installs ok.

  If the system is based on the preconfigured drivers folder it will not install.

  I've removed all USB devices (including root hubs), reset and rebuilt the cache driver and nothing works.

  Rebuilding my PC will take ages! There must be a faster solution!

  I found the solution!

  You need to repair or rebuild Windows DriverStore. (which would make a reinstallation)

  You need access to a working Windows machine to solve this problem, but your PC will fix the driverstore himself.

  To do this:

  1) go to "C:\Windows\System32\DriverStore\FileRepository" from a working PC that is copied to a USB drive or a network share.

  (2) on your PC goto Device Manager and find the device that settles (look for the yellow triangle).

  (3) right click and select "Update Driver Software".

  (4) select "Browse my computer for driver software".

  5) navigate to the location of your good copy of the DriverStore

  (6) "Include subfolders" check and click Next

  Windows will now search the driver good store and will be re - install the pre-configured drivers.

  Ignore any warnings about the driver being unsigned and let your PC to install them.

  Work pilots will be given on your pc, the driver cache will rebuild and your device will start working.

  Hooray!

  If you move the device to another USB port it will now install automatically, as it should.

• I plugged my USB Modem to the computer, it's MMX352G micromax modem. After you connect to the internet, all browsers open the pages of the BM, but in the taskbar sign of the network is to have a red cross. Why?

  I plugged my USB Modem to the computer, it's MMX352G micromax modem. After the internet connection all browsers open the pages of the World Bank, but in the task bar sign network is to have a Red Cross and when I go over it, it says not connected, but I can always use internet in my browsers. Why? It causes an adverse effect on my computer.

  Hi Akash,

  Welcome to the Microsoft community. According to the description of the bar icon problem tasks of the network have a red x, but you can still access the internet. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You use a third-party security software?

  I suggest you follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Windows wireless and wired network connection problems

  You can read this article for more information:

  How can I troubleshoot network card?

  I hope this helps. Let us know if you need more assistance.