Re: Satellite L500-1WH stuck when updating BIOS

Hi all

I have a Toshiba Satellite L500-1HW, and today TEMPRO shown to me three alerts, one of them on a BIOS update. When I tried to run the application to update the BIOS (Phoenix UEFI WinFlash) he completed the first four steps, "Load the new BIOS", "Analyze old and new BIOS compatibility ', 'Reading old BIOS' and 'Save old BIOS to the backup file', but when he reached the stage of the las,"New Flash BIOS", he got stuck displaying the message 'Region of programming Bios... '. ». Now the laptop is turned on and in fact I can use it as the application of the BIOS update does not block the system, but I don't know what to do, I dare not just to finalize the program because I don't know if the BIOS is right.

Please help me with this problem.

Thank you.

Hey,.

Do you have any other programs like Internet browser, Skype or something else? All programs must be closed before you start the update of the BIOS, even AntiVirus, firewall, etc. In addition, the update should be done as an administrator

In General, the BIOS update is not necessary. If only TEMPRO presents a new version, there is no reason to update. Never touch a running system ;)

Tags: Toshiba

Similar Questions

  • Satellite L500 (PSLS9A-01U012) - better update BIOS 1.6?

    It's just a small thing, but my last PC Toshiba laptop has the option to boot from USB. I could boot a Linux and Windows from a USB key, and it was great. So here's my question. Is it possible to boot from USB without a BIOS update?

    Well, I know that the answer is probably no, so I'll ask the question. Thinking that there is an update for my BIOS, I visited the mytoshiba.com.au website and discovered that the only available update is that I currently have. Then I went on the site of decision-makers (Pheonix) BIOS, who headed biosagentplus.com, which scanned my computer to check updates. He claims that it is a new BIOS update available, but I must register and PAY for an annual subscription to just the chance to see what is the version number of this release. So my question is, where is this "update" and it supports boot from USB?

    Thank you.

    Hi Hambo,

    The fact is that not all laptop computers support booting from the USB device and if it s possible is described in your user manual.
    As far as I know it is only possible to boot from the USB on Satellite L500 floppy drive, but not USB key

    Also the BIOS update does that fix bugs and add new features for I n t see a reason to make the point.
    But if you make an update of the BIOS at any time, you must download site Web from Toshiba to form. This is the only site where you can get a compatible BIOS.

  • Satellite L500-1WH is upgrading to i5 processor possible?

    Hello

    is it possible to upgrade the processor i3 in the Satellite L500-1WH to the i5 processor?

    I have an i5 processor to an HP laptop and I want to upgrade the Toshiba, if possible.

    Thank you

    Hello

    Similar questions have been posted in the past. If you want to use the forum s advanced search option, you will get a lot of discussion on this topic.

    First of all you need to know that laptop upgrades from manufacturers (any manufacturer) don t CPU support officially.
    In case you want to upgrade the processor, you can do it at your own risk.

    Second, you should check the chipset that is used in Notepad.
    I guess that this device supports an Intel HM55 chipset.

    I found info on the processors that are supported by the chipset HM55 (click on compatible products)
    http://Ark.Intel.com/products/43183/Intel-BD82HM55-PCH

    But even if you choose one of the processors referred to and supported, the BIOS can it not support because the BIOS has been designed and modified to the L500 and not tested with other pieces of equipment.

  • Re: Satellite L500-1XL - display problem after BIOS update

    Hello!

    I recently received a Satellite L500-1XL, works fine until I gave it to my friend...
    The problem is that he has updated the bios to V 2.10 (don't know why) and since then, the image on the screen appears as 15.4 "even in the bios.

    Any ideas what could cause the problem?

    Thank you

    Can you please make a picture how he looks in and post here?
    2.10 is the right version and I really put t understand what is the problem.

    Toshiba welcome screen appears as usual?

  • Satellite L500-1XC - error while updating the BIOS

    Hi, just download the most recent update BIOS but there is an error everytime I try to update to come... "uefi bios winflash over 210 ac of 10% battery attached"

    Connected AC and battery not charging but tried to leave and remove too. Current bios 1.60
    I tried to find a BIOS flash utility but no permits. BIOS default loaded and tried in safe mode too.

    Any suggestions?

    Hello

    I think that's the problem because the battery is not completely charged so you can't update the BIOS. Can you charge the battery when the laptop is turned off? I mean you can see the battery LED and if the battery is charged it changes the color of the orange in white or green (it s mentioned in the user manual). Can you confirm this?

    On the other side, it would be interesting to know why the BIOS update is important to you. Problems with the computer? If it is not updated the BIOS isn't important, you can forget it. Never touch a running system ;)

  • Satellite L500 - 1 Q 9 - update for the display driver

    My problem is that I'm looking for new drivers for the ATI Radeon HD 5165. When I install http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-32.aspx # 1, these drivers do not work do not see the results of the work. These drivers seem to be the old http://ce.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?LNG=20&service=CE and some games do not work on them.

    Thanks for your help.

    Hey,.

    Is it really a problem of display driver you need a new version? If you need a new display driver for the games, you must update the first DirectX version and take a look if the game is compatible with your graphics card.

    If you can find t a new display driver for Satellite L500 check other specs of the laptop. Other models like the Satellite L650 also have an AMD graphics card and there you should find a newer version. :)

  • Satellite 300 CDT - need to update BIOS

    Looking for a driver to update BIOS for Satellite 300CDT model PA1261EYX-FR95 that I bought in France a few years ago. Or, would like to know the reference of 128 MB memory module

    Hello

    Please check this site for the upgrade of the BIOS:
    http://www.toshiba-tro.de/subpage/BIOS.html

    In addition, you can use these memory modules:
    PA2039U 16 MB
    PA2043U 32MB
    PA2044U 64 MB
    PA2054U-MS 128 MB

    I recommend you to search the web site for this memory module or check Ebay in

    Good bye

  • Satellite L500-22R - ATI driver update

    Hi, I have a Toshiba Satellite L500-22R with an ATI Mobiliti Radeon HD 5145.

    I want to install new drivers for my card, but Toshiba doesn´t upgrade the driver from 2009 (version 8.653.0.0) and the official driver ATI is 13.1. The problem is that I can install page AMD because there is a problem of compatibility with the hardware.

    Can someone help me? I want to upgrade my version of driver and I can´t understand this situation.

    Hello

    Here is a page AMD providing this info:
    http://support.AMD.com/us/KbArticles/pages/AMDCatalystSoftwareSuiteVersion131.aspx

    + The following books * are not compatible * with this version: +.
    + All laptops launched after this driver release +.
    + Computers laptop Toshiba (please contact the laptop OEM for support of the drivers for these notebooks) +.
    + Computers laptops Sony VAIO (please contact the laptop OEM for support of the drivers for these notebooks) +.
    + Portable Panasonic (please contact the laptop OEM for support of the drivers for these notebooks) +.

    In some cases its possible to install these drivers, but you will have to manually do it from Device Manager. There, you have to click on the graphics card, choose the Advanced installation procedure which helps you to point to the folder of the driver that you downloaded from the page of AMD. The driver folder must contain the dll and ini files. These files are required for the update of the driver.

  • Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

    Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
    Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

    Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
    Took battery and RAM to see if I can delete it?

    Any ideas anyone?

    I think you mean BIOS * update * and do not upgrade ;)
    An upgrade is not possible

    However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
    Moreover I would load the default settings in the BIOS before starting Windows.

    If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

  • Satellite A300 - my stucks laptop on BIOS when USB is inserted

    Hello!

    I have a problem with my Toshiba Satellite A300. I had burned linux on a USB and tried to boot from usb. So when the laptop open, I inserted the USB and you press F12. The pc just stuck on Toshiba - Leading Innovation Screen.In the past, that I was doing the same thing and it worked very well.

    Now, I can't boot from usb.
    Can someone help me please?
    Thanks in advance!

    Set the BIOS to the default settings, restart the laptop and press F12 on startup laptop. When the boot menu appears put USB in laptop satellite.

    In the start menu, choose the USB option and press ENTER.

    What happens when you do this?

  • Satellite L500-1ZP - sound problem after bios update

    Hello

    Yesterday the update of the bios is installed and everything went well. The only problem is when I now plug in my headphones, the sound also comes through the laptop speakers. Before the update to the bios that the headphones sound when I connected them.

    What can I do about it?

    I have Windows 7 x 64

    Thanks in advance.

    No problem, buddy! :)

    But thank you very much for this useful information!

  • Satellite Pro U200: unable to update BIOS to v.3.70 - WIN

    Model No.: Satellite Pro U200 PLUA1E
    OS: Vista Business SP2
    Current BIOS: v. 3.50

    Try to update the BIOS to v3.70

    When I run P0044v370, I get a Windows Script Host message:

    "Script:
    C:\ProgramData\Toshiba\Common\_cabBDF1.tmp\autoExe c.vbe
    Line: 2
    Char: 1
    Error: Failed to create object named 'WScript.Shell '.
    Code: 8007007E
    "Source: WScript.CreateObject".

    I want to update the BIOS before the upgrade from 1 GB to 4 GB of memory. Also my U200 Pro keeps crashing and whenever before it restarts, I get a message saying something like "try to install the latest version of the BIOS" (it is not on the screen very long sorry can't be more accurate).

    I don't have have the recovery CD, I'm trying to boost performance because it runs very slowly.

    Everything is - I am in your forum people good hands! Thanks in advance.

    You have what Windows OS installed.
    It is Win XP?

    Update the BIOS needs an installation of the common Modules, so don't forget not that the common Modules are installed or this software update.
    The CM is on the page of the European driver Toshiba

    In addition, the P0044v370.exe unpacks the package I recommend creating a folder on the desktop and to decompress the files in P0044v370.exe first. Then move to this new folder and run the exe file in the folder.

  • Satellite A200 - corrupt 2.40 update BIOS for Vista x 64

    Hello

    I just downloaded new vista x 64 BIOS for my satellite A200 (PSAE3E) and I can't flash. I had to install four warnings before BIOS updated and 0 problems, but in this version of 2.40 vista x 64 when winplash flash new BIOS stop and there is the trace message:

    BIOS update failed, check the image failed. error code 200

    I put t know what happened.
    Where can I see what is this error 200?
    Has anyone installed this new BIOS?

    Do you use the 64-bit version of Vista?

    The mentioned BIOS is only compatible for portable computers with Windows Vista! (64-bit)

  • Re: Satellite L500 - crackling noise when audio plays

    Hi all

    I bought a few weeks ago L500 (Windows 7 64-bit). Everything is fine except for the sound. 1 h or more after running computer, the speakers begin to produce a "cracking", "metal" noise when the audio is reproducible, regardless of the source (CD, system sounds, movies, MP3s...). It's just like there are hundreds of "micro-pannes". The same thing with the headphones. This seems also affect all media files, for example the length of 10-minute videos take 12 minutes or so play due to these micro-interruptions. The sound gets worse over time and gets normal once the system is rebooted, but a few minutes later the noise comes back.

    I have all the latest Toshiba driver implemented to date, BIOS, LAN, sound cards, etc..

    What can I do? Any idea will be welcome.

    Thanks in advance.

    Hello

    I don't know much L500 series but creaking sound is annoying problem for A500 series. I think that a graphics card driver is a troublemaker. If your laptop is equipped with an nvidia graphics card, go to his site and update a Vga driver. In my case, it solved my problem. (B-)

  • Satellite A-C50-1JU - manually updated BIOS

    Hi Forum,

    is their any chance of updating the bios manually? The laptop is a Toshiba Satellite C50-A-1JU with part number: PSCJEE. The Toshiba Service Station brings to each time a service error. Another update from the site Web DM10S140.exe crashes every time. I tried the compatibility mode, startet it as administrator, but never the actual accident itself. Operating system windows 8.1 and anti-virus is disabled. What I have now? Thanks for any help.

    Edit, sorry postet in the wrong section please move: (.)

    I think Toshiba Service Station is a tool not so important but interesting. If your laptop works well and stabile you don't need updates. Maybe it sounds silly now, but I use two laptops from Toshiba with the factory settings and without updates. The first is 5 years old and it is running Win7. The other is model Tecra, 3 years and also preloaded with Win7.

    All I have install Windows are updated. The first thing I did after installing recovery image is the deactivation of these tools like Toshiba Service Station.
    Believe me, you can live without it.

    In the end I have to say that I'm also sure that updating the BIOS won't help you any. The BIOS update has nothing to do with the Toshiba Service Station feature.

Maybe you are looking for