Satellite L500 (PSLS9A-01U012) - better update BIOS 1.6?

Similar Questions

• Satellite L500 (PSLS9A-01U012) - bad BIOS HWsetup

  first the card, I have the toshiba satellite l500 core i3 @2. 13 ghz 4 GB ram 500 GB hard drive
  I bought this laptop in December and has recently had a problem that required me to reinstall windows 7. I went to a set of recovery discs, only to be told that he could not find the recovery partition. the recovery partition is still there that I can see via easeus data recovery pro. thing is try to make a backup of recovery it says cannot find the recovery partition and now the hwsetup shows the bios version as a bunch of symbols instead of the number. is there a way to fix this without ordering a set of discs from toshiba?

  screenshot of hwsetup window is http://imageshack.us/photo/my-images/135/biosversionscreenshot.png/

  Hey,.

  I put t think that the problem is related to your installation of Windows 7

  In your case, I'll try to reinstall HWsetup and added value package. These two tools can be downloaded from the official website of Toshiba:
  www.MyToshiba.com.au

  Check this box!

• Re: Satellite L500-1WH stuck when updating BIOS

  Hi all

  I have a Toshiba Satellite L500-1HW, and today TEMPRO shown to me three alerts, one of them on a BIOS update. When I tried to run the application to update the BIOS (Phoenix UEFI WinFlash) he completed the first four steps, "Load the new BIOS", "Analyze old and new BIOS compatibility ', 'Reading old BIOS' and 'Save old BIOS to the backup file', but when he reached the stage of the las,"New Flash BIOS", he got stuck displaying the message 'Region of programming Bios... '. ». Now the laptop is turned on and in fact I can use it as the application of the BIOS update does not block the system, but I don't know what to do, I dare not just to finalize the program because I don't know if the BIOS is right.

  Please help me with this problem.

  Thank you.

  Hey,.

  Do you have any other programs like Internet browser, Skype or something else? All programs must be closed before you start the update of the BIOS, even AntiVirus, firewall, etc. In addition, the update should be done as an administrator

  In General, the BIOS update is not necessary. If only TEMPRO presents a new version, there is no reason to update. Never touch a running system ;)

• Re: Satellite L500-1XL - display problem after BIOS update

  Hello!

  I recently received a Satellite L500-1XL, works fine until I gave it to my friend...
  The problem is that he has updated the bios to V 2.10 (don't know why) and since then, the image on the screen appears as 15.4 "even in the bios.

  Any ideas what could cause the problem?

  Thank you

  Can you please make a picture how he looks in and post here?
  2.10 is the right version and I really put t understand what is the problem.

  Toshiba welcome screen appears as usual?

• Satellite L500-1XC - error while updating the BIOS

  Hi, just download the most recent update BIOS but there is an error everytime I try to update to come... "uefi bios winflash over 210 ac of 10% battery attached"

  Connected AC and battery not charging but tried to leave and remove too. Current bios 1.60
  I tried to find a BIOS flash utility but no permits. BIOS default loaded and tried in safe mode too.

  Any suggestions?

  Hello

  I think that's the problem because the battery is not completely charged so you can't update the BIOS. Can you charge the battery when the laptop is turned off? I mean you can see the battery LED and if the battery is charged it changes the color of the orange in white or green (it s mentioned in the user manual). Can you confirm this?

  On the other side, it would be interesting to know why the BIOS update is important to you. Problems with the computer? If it is not updated the BIOS isn't important, you can forget it. Never touch a running system ;)

• Satellite 300 CDT - need to update BIOS

  Looking for a driver to update BIOS for Satellite 300CDT model PA1261EYX-FR95 that I bought in France a few years ago. Or, would like to know the reference of 128 MB memory module

  Hello

  Please check this site for the upgrade of the BIOS:
  http://www.toshiba-tro.de/subpage/BIOS.html

  In addition, you can use these memory modules:
  PA2039U 16 MB
  PA2043U 32MB
  PA2044U 64 MB
  PA2054U-MS 128 MB

  I recommend you to search the web site for this memory module or check Ebay in

  Good bye

• Satellite L500 - 1 Q 9 - update for the display driver

  My problem is that I'm looking for new drivers for the ATI Radeon HD 5165. When I install http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-32.aspx # 1, these drivers do not work do not see the results of the work. These drivers seem to be the old http://ce.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?LNG=20&service=CE and some games do not work on them.

  Thanks for your help.

  Hey,.

  Is it really a problem of display driver you need a new version? If you need a new display driver for the games, you must update the first DirectX version and take a look if the game is compatible with your graphics card.

  If you can find t a new display driver for Satellite L500 check other specs of the laptop. Other models like the Satellite L650 also have an AMD graphics card and there you should find a newer version. :)

• Satellite L500-22R - ATI driver update

  Hi, I have a Toshiba Satellite L500-22R with an ATI Mobiliti Radeon HD 5145.

  I want to install new drivers for my card, but Toshiba doesn´t upgrade the driver from 2009 (version 8.653.0.0) and the official driver ATI is 13.1. The problem is that I can install page AMD because there is a problem of compatibility with the hardware.

  Can someone help me? I want to upgrade my version of driver and I can´t understand this situation.

  Hello

  Here is a page AMD providing this info:
  http://support.AMD.com/us/KbArticles/pages/AMDCatalystSoftwareSuiteVersion131.aspx

  + The following books * are not compatible * with this version: +.
  + All laptops launched after this driver release +.
  + Computers laptop Toshiba (please contact the laptop OEM for support of the drivers for these notebooks) +.
  + Computers laptops Sony VAIO (please contact the laptop OEM for support of the drivers for these notebooks) +.
  + Portable Panasonic (please contact the laptop OEM for support of the drivers for these notebooks) +.

  In some cases its possible to install these drivers, but you will have to manually do it from Device Manager. There, you have to click on the graphics card, choose the Advanced installation procedure which helps you to point to the folder of the driver that you downloaded from the page of AMD. The driver folder must contain the dll and ini files. These files are required for the update of the driver.

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Satellite L500-1ZP - sound problem after bios update

  Hello

  Yesterday the update of the bios is installed and everything went well. The only problem is when I now plug in my headphones, the sound also comes through the laptop speakers. Before the update to the bios that the headphones sound when I connected them.

  What can I do about it?

  I have Windows 7 x 64

  Thanks in advance.

  No problem, buddy! :)

  But thank you very much for this useful information!

• Satellite Pro U200: unable to update BIOS to v.3.70 - WIN

  Model No.: Satellite Pro U200 PLUA1E
  OS: Vista Business SP2
  Current BIOS: v. 3.50

  Try to update the BIOS to v3.70

  When I run P0044v370, I get a Windows Script Host message:

  "Script:
  C:\ProgramData\Toshiba\Common\_cabBDF1.tmp\autoExe c.vbe
  Line: 2
  Char: 1
  Error: Failed to create object named 'WScript.Shell '.
  Code: 8007007E
  "Source: WScript.CreateObject".

  I want to update the BIOS before the upgrade from 1 GB to 4 GB of memory. Also my U200 Pro keeps crashing and whenever before it restarts, I get a message saying something like "try to install the latest version of the BIOS" (it is not on the screen very long sorry can't be more accurate).

  I don't have have the recovery CD, I'm trying to boost performance because it runs very slowly.

  Everything is - I am in your forum people good hands! Thanks in advance.

  You have what Windows OS installed.
  It is Win XP?

  Update the BIOS needs an installation of the common Modules, so don't forget not that the common Modules are installed or this software update.
  The CM is on the page of the European driver Toshiba

  In addition, the P0044v370.exe unpacks the package I recommend creating a folder on the desktop and to decompress the files in P0044v370.exe first. Then move to this new folder and run the exe file in the folder.

• Satellite A-C50-1JU - manually updated BIOS

  Hi Forum,

  is their any chance of updating the bios manually? The laptop is a Toshiba Satellite C50-A-1JU with part number: PSCJEE. The Toshiba Service Station brings to each time a service error. Another update from the site Web DM10S140.exe crashes every time. I tried the compatibility mode, startet it as administrator, but never the actual accident itself. Operating system windows 8.1 and anti-virus is disabled. What I have now? Thanks for any help.

  Edit, sorry postet in the wrong section please move: (.)

  I think Toshiba Service Station is a tool not so important but interesting. If your laptop works well and stabile you don't need updates. Maybe it sounds silly now, but I use two laptops from Toshiba with the factory settings and without updates. The first is 5 years old and it is running Win7. The other is model Tecra, 3 years and also preloaded with Win7.

  All I have install Windows are updated. The first thing I did after installing recovery image is the deactivation of these tools like Toshiba Service Station.
  Believe me, you can live without it.

  In the end I have to say that I'm also sure that updating the BIOS won't help you any. The BIOS update has nothing to do with the Toshiba Service Station feature.

• Satellite A200 - corrupt 2.40 update BIOS for Vista x 64

  Hello

  I just downloaded new vista x 64 BIOS for my satellite A200 (PSAE3E) and I can't flash. I had to install four warnings before BIOS updated and 0 problems, but in this version of 2.40 vista x 64 when winplash flash new BIOS stop and there is the trace message:

  BIOS update failed, check the image failed. error code 200

  I put t know what happened.
  Where can I see what is this error 200?
  Has anyone installed this new BIOS?

  Do you use the 64-bit version of Vista?

  The mentioned BIOS is only compatible for portable computers with Windows Vista! (64-bit)

• Satellite Pro L300: BSOD after updating BIOS

  Hello

  After updating the Bios of the Satellite Pro L300, windows will not start!
  His show the blue screen of death!

  What can I do?

  Hello

  You are able to access the BIOS settings?
  I m not very well why this BSOD appears, but eventually the SATA mode settings have been changed after the BIOS update

  Usually the SATA mode must be on AHCI if the SATA drivers are installed.
  But if the SATA drivers are not included the SATA mode must be set to compatible.

  Please check this!

  In addition, you could set the BIOS default settings and may try to start the computer again.

• Satellite A80-135 PSA80: after updating Bios keyboard will not

  SATELLITE A80 - 135 MS (MS is for Spanish)?
  model PSA80E-04C00JSP
  SER 55XXXXXXK

  Windows xp sp3 Spanish

  -> Update of the riginal 1.5_ bios (bios ID EAT10 / EAT20 bios version: v1.50)
  for _v 2.8_

  Downloaded bios - 20070709170816.zip of the Spain of toshiba
  http://es.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=es

  Unzipped the file and found an excutable "windows installation" and "AT10280a.rom".
  Double-click on the installer and...

  .... Now the keyboard is used for nothing (strange signs instead of letters)

  During the update (windows xp) I think I saw something on a master (original rom backup) in c:/windows/temp
  but now I can't find the backup rom.

  Can anyone help?
  Would it be possible to 'downgrade' to the bios (1.5) original and if so... where can I find it?

  Thank you

  Hello

  I don t know why it happened after updating the BIOS, but I guess that the language of the keyboard settings are not correct.

  Go to Control Panel-> Regional Options & language-> language (second tab)-> Details

  Here, you must choose the right keyboard (Spanish) language?

  Good bye