Satellite A-C50-1JU - manually updated BIOS

Similar Questions

• Satellite 300 CDT - need to update BIOS

  Looking for a driver to update BIOS for Satellite 300CDT model PA1261EYX-FR95 that I bought in France a few years ago. Or, would like to know the reference of 128 MB memory module

  Hello

  Please check this site for the upgrade of the BIOS:
  http://www.toshiba-tro.de/subpage/BIOS.html

  In addition, you can use these memory modules:
  PA2039U 16 MB
  PA2043U 32MB
  PA2044U 64 MB
  PA2054U-MS 128 MB

  I recommend you to search the web site for this memory module or check Ebay in

  Good bye

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Satellite A-C50-K9K - after updating the BIOS, cooling fan is very loud

  Gas station proposed to update the BIOS. 1.00 to 1.30. After updating the cooling system is 90% of the time. Load the default settings BIOS do not change.

  No backup of the BIOS. Is it possible to download BIOS 1.00 or solve this problem?

  The downgrade of the BIOS is not possible because you n t have the first version of BIOS and even if you get the 1.0 version of BIOS, the BIOS update procedure is not possible because the newer version is already flashed.

  But I recommend you set the method in Windows to optimize power or better management the cooling battery life

  + Control Panel--> Power Options--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method.

• Satellite L500 (PSLS9A-01U012) - better update BIOS 1.6?

  It's just a small thing, but my last PC Toshiba laptop has the option to boot from USB. I could boot a Linux and Windows from a USB key, and it was great. So here's my question. Is it possible to boot from USB without a BIOS update?

  Well, I know that the answer is probably no, so I'll ask the question. Thinking that there is an update for my BIOS, I visited the mytoshiba.com.au website and discovered that the only available update is that I currently have. Then I went on the site of decision-makers (Pheonix) BIOS, who headed biosagentplus.com, which scanned my computer to check updates. He claims that it is a new BIOS update available, but I must register and PAY for an annual subscription to just the chance to see what is the version number of this release. So my question is, where is this "update" and it supports boot from USB?

  Thank you.

  Hi Hambo,

  The fact is that not all laptop computers support booting from the USB device and if it s possible is described in your user manual.
  As far as I know it is only possible to boot from the USB on Satellite L500 floppy drive, but not USB key

  Also the BIOS update does that fix bugs and add new features for I n t see a reason to make the point.
  But if you make an update of the BIOS at any time, you must download site Web from Toshiba to form. This is the only site where you can get a compatible BIOS.

• Satellite Pro U200: unable to update BIOS to v.3.70 - WIN

  Model No.: Satellite Pro U200 PLUA1E
  OS: Vista Business SP2
  Current BIOS: v. 3.50

  Try to update the BIOS to v3.70

  When I run P0044v370, I get a Windows Script Host message:

  "Script:
  C:\ProgramData\Toshiba\Common\_cabBDF1.tmp\autoExe c.vbe
  Line: 2
  Char: 1
  Error: Failed to create object named 'WScript.Shell '.
  Code: 8007007E
  "Source: WScript.CreateObject".

  I want to update the BIOS before the upgrade from 1 GB to 4 GB of memory. Also my U200 Pro keeps crashing and whenever before it restarts, I get a message saying something like "try to install the latest version of the BIOS" (it is not on the screen very long sorry can't be more accurate).

  I don't have have the recovery CD, I'm trying to boost performance because it runs very slowly.

  Everything is - I am in your forum people good hands! Thanks in advance.

  You have what Windows OS installed.
  It is Win XP?

  Update the BIOS needs an installation of the common Modules, so don't forget not that the common Modules are installed or this software update.
  The CM is on the page of the European driver Toshiba

  In addition, the P0044v370.exe unpacks the package I recommend creating a folder on the desktop and to decompress the files in P0044v370.exe first. Then move to this new folder and run the exe file in the folder.

• Satellite A200 - corrupt 2.40 update BIOS for Vista x 64

  Hello

  I just downloaded new vista x 64 BIOS for my satellite A200 (PSAE3E) and I can't flash. I had to install four warnings before BIOS updated and 0 problems, but in this version of 2.40 vista x 64 when winplash flash new BIOS stop and there is the trace message:

  BIOS update failed, check the image failed. error code 200

  I put t know what happened.
  Where can I see what is this error 200?
  Has anyone installed this new BIOS?

  Do you use the 64-bit version of Vista?

  The mentioned BIOS is only compatible for portable computers with Windows Vista! (64-bit)

• Re: Satellite L500-1WH stuck when updating BIOS

  Hi all

  I have a Toshiba Satellite L500-1HW, and today TEMPRO shown to me three alerts, one of them on a BIOS update. When I tried to run the application to update the BIOS (Phoenix UEFI WinFlash) he completed the first four steps, "Load the new BIOS", "Analyze old and new BIOS compatibility ', 'Reading old BIOS' and 'Save old BIOS to the backup file', but when he reached the stage of the las,"New Flash BIOS", he got stuck displaying the message 'Region of programming Bios... '. ». Now the laptop is turned on and in fact I can use it as the application of the BIOS update does not block the system, but I don't know what to do, I dare not just to finalize the program because I don't know if the BIOS is right.

  Please help me with this problem.

  Thank you.

  Hey,.

  Do you have any other programs like Internet browser, Skype or something else? All programs must be closed before you start the update of the BIOS, even AntiVirus, firewall, etc. In addition, the update should be done as an administrator

  In General, the BIOS update is not necessary. If only TEMPRO presents a new version, there is no reason to update. Never touch a running system ;)

• Satellite Pro L300: BSOD after updating BIOS

  Hello

  After updating the Bios of the Satellite Pro L300, windows will not start!
  His show the blue screen of death!

  What can I do?

  Hello

  You are able to access the BIOS settings?
  I m not very well why this BSOD appears, but eventually the SATA mode settings have been changed after the BIOS update

  Usually the SATA mode must be on AHCI if the SATA drivers are installed.
  But if the SATA drivers are not included the SATA mode must be set to compatible.

  Please check this!

  In addition, you could set the BIOS default settings and may try to start the computer again.

• Satellite A80-135 PSA80: after updating Bios keyboard will not

  SATELLITE A80 - 135 MS (MS is for Spanish)?
  model PSA80E-04C00JSP
  SER 55XXXXXXK

  Windows xp sp3 Spanish

  -> Update of the riginal 1.5_ bios (bios ID EAT10 / EAT20 bios version: v1.50)
  for _v 2.8_

  Downloaded bios - 20070709170816.zip of the Spain of toshiba
  http://es.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=es

  Unzipped the file and found an excutable "windows installation" and "AT10280a.rom".
  Double-click on the installer and...

  .... Now the keyboard is used for nothing (strange signs instead of letters)

  During the update (windows xp) I think I saw something on a master (original rom backup) in c:/windows/temp
  but now I can't find the backup rom.

  Can anyone help?
  Would it be possible to 'downgrade' to the bios (1.5) original and if so... where can I find it?

  Thank you

  Hello

  I don t know why it happened after updating the BIOS, but I guess that the language of the keyboard settings are not correct.

  Go to Control Panel-> Regional Options & language-> language (second tab)-> Details

  Here, you must choose the right keyboard (Spanish) language?

  Good bye

• Satellite Pro L10: Unable to update BIOS

  Hello, I tried (three times) to update my BIOS using the Windows version, but everytime I try, it fails and sends a report to Microsoft - anyone know what is the problem and how to fix it?

  Hello

  First of all he must know that if you use the bad BIOS or bad BIOS update procedure, can damage the laptop (motherboard)
  I checked the Toshiba page and it seems that, currently, the BIOS release is 25/04/06 - version 2.6

  Please check this BIOS FAQ document:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  You can find the BIOS update.
  According to this document, you must use the traditional update of the BIOS (BIOS upgrade procedure 2).

• Satellite L655 (PSK1JE) - 100% after update BIOS fan speed

  Hello

  Yesterday, I do BIOS update since version 2.10 to 2.20. The update of configuration correctly but the problem is the fan, the speed is 100% all the time.

  others have this problem with this version of bios?

  Can I downgrade to the version of the bios?

  Thank you and waiting for your answers

  Hi kingofcopy,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default values.

  Have you tested the behavior of fan with cooling optimized battery option? In Windows power management, you can define more low fan speed in power management to reduce the activity of the fan.

  Check this box!

• Satellite 1950 - I can't update Bios

  Hello

  I just got a Toshiba SAT. 1950 second hand. (1 GB of ram, 2.4 ghz, 160 GB hd)
  I noticed that he needs a bios update, but the hard drive does not work.

  So I downloaded the BIOS file - V150.exe (768.748 13.12.2002 14:07), started the exe on another computer.
  extract the files on the disk, files on USB drive and started the Freedos USB.

  The depacked files are:
  all. ROM 524.288 25.11.2002 07:29 - a. -
  ALMBDD08. BIN 2,495 06.06.2002 12:40 - has-
  ATR60. BEATS 43 08.06.2002 13:15 - a. -
  Autoexec.bat 262 13.12.2002 13:26 - a. -
  PHLASH. EXE 74.249 24.05.2001 12:32 - a -.

  I tried to run ATR60. BAT for updating the BIOS.
  The phlash bios update screen appears but HANGS on the identification of the eeprom.
  The only thing I can do is to turn off the laptop and try again, with the same result.

  Where can I get a BIOS adequate up-to-date?

  Hello!

  I think you should try it using an external floppy drive.

  On the Toshiba site, I can find the following information:
  1 extract the zip file containing the BIOS upgrade to a temporary folder.
  2. Insert a 1.44 MB diskette formatted in the floppy drive.
  3 run the *.exe extracted to the temporary folder. Follow the instructions on the screen. A BIOS update diskette will be generated
  4. make sure that the laptop is plugged into the sector.
  5. turn off the laptop.
  6. Insert the diskette containing the BIOS upgrade in drive A: and turn on the laptop.
  7. follow the on-screen instructions.
  8. when the procedure is finished, remove the disk and reboot the laptop.

  Good bye

• Satellite Pro L40 PSL43E: How update BIOS

  Hello

  I hope someone can help please?

  My Sat Pro L40 was entering into an infinite loop of BSOD, and I think I This reduces up to an update of the BIOS that I need.

  I downloaded the correct one for my laptop model: PSL43E.

  I saved on the desktop and extract the files to a folder on the desktop.

  The instructions on this site say run the *.exe file

  I see only 2; that which is a small file winflash.exe.manifest and the winflash (and has an icon of chip next to him) to research in the properties of this file, it says it's an .exe file so I tried to run it.

  File pos up to with the "is it the right of a warning" I click ok and about 15 seconds later, a box appears looking for a file name and in the name of box says "here for the Fill bios image file.

  I'm at a loss what to do next because I can't get the update of the BIOS works properly.

  The laptop opens in safe mode on a user account inactive that I've never used (it does not open in safe mode in my own user account and enter the BSOD loop).

  Help, please!

  Great tips Maurice! ;)

• Updating BIOS for Satellite C55-A-1RG can not be downloaded - 404 not found

  I can't download the update of bios for laptop Satellite C55-A-1RG.
  I go to http://www.toshiba-greece.com/innovation/jsp/supportMyProduct.do?LNG=28&service=SE and when I click on the link

  02/12/14
  Update the BIOS
  Toshiba OS independent 1, 10 - WIN World Wide

  It shows me
  404 not found
  Nginx

  Nobody knows the correct link because I want to install windows 7, only the laptop for one of my clients and with the bios that have the laptop by default some options (start secure-> disable and start-> start MSC mode) and I can't install windows 7.

  If anyone knows of another way to install windows 7, it will be very useful.

  + The message was edited: link has been removed.

  Hello

  It seems that pilots could be downloaded again.

  You should be able to download this BIOS update package:
  [BIOS v1.10-VICTORY for Satellite C50-has, Satellite Pro C50-has, Satellite C55-has | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7936 & selSh ortMod = 4433 & language = 13 & selOS = all & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 89306 & OS ID =-1 & driverLanguage = 42]