Re: Satellite L645 - peripheral Bluetooth not detected

Similar Questions

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Satellite A500-19W does not detect battery

  Hello

  I have a portable Satellite A500-19W which is 6 months old.

  I bought this laptop while I was in Egypt and now I've moved (Dubai) UNITED Arab Emirates.

  Lately my laptop started suddenly does not detect battery.

  To remedy this that I have to remove the battery and clean the terminals then re - put the battery and turn it on and it's OK.

  This happened twice this week and caused my data loss because the charger is disconnected (if the charger is connected, the laptop computer continue to work, but the battery indicator does not light up)

  Now, my questions are the following
  1 - is this problem under warranty?
  2 - should I pay for anything when getting this laptop in service in Dubai noting that I bought in Egypt?
  3. is there a cure for this problem without going through the service center?

  Thank you

  1 / Yes. These questions should be covered by the warranty. Material is junk.

  2 / the nearest service contact and ask, but I'm sure you don't have to pay for the repair. The two countries are countries in EMEA, and avoid any kind of problems.

  3 / it is not much, you can do about it so please contact and explain the situation. They should check your laptop and find a reason why this happens.

  Don t waste your time and contact the closest service. If you have need for addresses and phone numbers you can find on http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• New PA3533U-1 b RS/AS for Satellite A300D battery is not detected

  I recently had a new battery PA3533U-1B SR / regarding my age Satellite a 300 d.
  When I put the new battery in the laptop, unplugged computer, press the power button, the Red battery light blinks several times, no power.

  When I plug the power to the laptop, the red light on the battery remains red as-if the load, once windows has loaded the battery shows as not detected.

  I kept the battery charge during 12 hours +, both the 2nd and 3rd battery I received, and none of them show only detected.
  When the laptop is off, new battery, ca, red light stays on for about an hour then it continually flashes. This occurs at the same time. After loading it lights up to insert ac, then when windows loading, undetected bat.
  When I put my original battery in turns without ac and battery and correct information shows.

  I returned the 1st battery, once I reported a 2nd defective, he sent me a 3rd. The dealer has a very positive feedback and good comment, I recently received an email from the merchant who quote
  "There could be a problem with the system, as one you returned to us work perfectly well."

  I have a good loyal battery which lasts 20 minutes, which recognizes at all times and costs without problem.
  If you could please help it would actually prevent me from going crazy, thanks in advance :)

  Are these batteries original battery Toshiba Toshiba name on the label of the battery?
  Start your laptop without battery power only, and when the windows are fully charged the battery in place. Battery is correctly recognized?

• Satellite A300d - new battery not detected

  I recently had a new battery PA3533U-1B SR / regarding my age Satellite a 300 d.
  When I put the new battery in the laptop, unplugged computer, press the power button, the Red battery light blinks several times, no power.

  When I plug the power to the laptop, the red light on the battery remains red as-if the load, once windows has loaded the battery shows as not detected.

  I have checked the connection and passed through Device Manager-uninstall/install, but came with no luck. It is the 3rd replacement battery, I had this company who have a very positive opinion. Is it my laptop or battery?

  I have a good battery minutes 20 faithful who recognizes all time and expenses without problem.
  If you could please help it would actually prevent me from going crazy, thanks in advance :)

  Hello

  I recommend you to keep the charge of the battery for a longer period if the time
  The battery is working correctly? I mean the laptop can charge the battery and no flashing red led is visible. Right? Well, it means that this laptop is OK!

  In such cases, it s battery related question keep the battery in a few hours or maybe day this helps if not, then I recommend you to get in touch with the retailer and ask another battery

• Satellite L10 103 does not detect my WLAN

  Hello again,
  Well, now my restore CD does not work I open a topic on the real problem.

  My toshiba that satellite L10-103 doesn't detect my WLAN, he finds other local networks without WIRE, but not mine.
  You have evidence?

  Hello

  Are you sure that the internal Wlan card supports the WLan standard even as you have WiFi router at home?

  My old laptop can't detect my WiFi at home because the wifi card does not support the Wlan standard as my router.
  I had to buy a USB WLan external to connect right old portable wireless stick.

  PS: Try to update the Wlan driver. Sometimes it helps

• Satellite A300 PSAG4A: Webcam not detected in Device Manager

  I have a Toshiba Satellite A300 PSAG4A 02L00M with Vista Home Premium 64-bit.
  The webcam is not working and it is not detected in Device Manager.
  When I install the Chicony camera drivers, I get the "Webcam driver open fail. Error message.

  The fact that I can't see the Webcam in Device Manager tells me that there may be a hardware failure.
  However, I hope that this is a setting that I can fix myself.

  I had restored the laptop to factory also and I've updated the bios.
  I tried to uninstall all the USB controllers and reboot the PC.

  Is there something I can do?
  It's maybe a software problem?
  There may be a setting?

  Best way to test the operation of the equipment is to check with the factory settings installation operating system with the Toshiba recovery image. As I see that you have done this already.

  So if cam still doesn't work properly, I fear that there is a problem with the hardware.
  It cannot be matter of software because the recovery image contains the driver for the cam.

• Satellite L50T - Has - Touchpad not detected

  I have a Toshiba Satellite L50T-A running 64-bit Windows 8. All of a sudden my touchpad has disappeared from the settings. When I do a search for new material, it is not detected or the other. What a trendy?

  I wish I had pictures with exactly what I need to do.
  Thank you in advance.

  Hello

  If I understand you right touchpad is not detected and do not appear in Device Manager, right?

  Problem is that you can not do much and touchpad to work force.
  What you can try is to test the feature with the factory settings. With other words, you can set the BIOS to default settings and reinstall the original recovery image. After that this laptop will have the same parameters as for the first day after the first start.

  If you do this, and the result is the same, that it is possible that the touchpad is defective or there is a problem with the touchpad to the motherboard connection. This should be controlled by the service of Toshiba.

  You use an external mouse at this time?

• HP Probook 430 G2: HP Probook 430 G2 - HW Bluetooth not detected on Device Manager

  Hello team HP,

  I just bought HP Probook 430 G2 and using the Windows 7 Entriprise 64-bit SP1 operating system.

  Why bluetooth HW is not detected in Device Manager, I know that this laptop has built-in bluetooth.

  

  Please kindly help.

  Thank you

  You are the very welcome.

  You are right.  This wireless card has built in bluetooth.

  See if this driver installation get the bluetooth to work.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1

  If this is not the case, check the BIOS to see if there is a setting to turn bluetooth on or off.

  If this isn't the case, install it and see if it detects the bluetooth radio and turn it on using the software.

  Once you turn on the BT, you can either go to the use of the software or uninstall.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_154636_1

  If none of the works above, I suggest that you contact HP technical support and submit a case under the guarantee pension, because I think that there is something wrong with the wireless card.

• Bluetooth not detected in Samsung ATIV Smart Pro

  Bluetooth is not detected in ATIV Smart Pro, is there a solution to this? There is no option for me to turn it on in the background. Can anyone help?  Thank you very much, your help is much appreciated

  Hi Lewis,

  Please follow the steps in the link to ensure that airplane mode is disabled and activate the Bluetooth settings.

  Check out the link:

  How to register a Bluetooth device in Windows 8

  http://www.Samsung.com/us/support/howtoguide/N0000504/9856/116930/XE700T1C-A04US

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Satellite A500 - 18Q - battery not detected after installing Windows

  I have Satelite A500 - 18Q (PSAR3E) and Windows 7 32 bit

  Windows is not detected battery. What should I install to the Windows recordnize the battery?

  Hi marnin,.

  Have you installed Windows Toshiba Recovery disk or normal drive of Microsoft?

  Normally for the battery you n t need an additional driver. He will be recognized automatically.

  Can you charge the battery when the laptop is turned off?

• Satellite M30x + Win7: DVD not detected by the CD/DVD drive

  Hello

  I use a M30x since 2004 with its CD/DVD drive * a S mat. DVD-RAM UJ-831
  When I was with Windows XP, I have never had problems to read or write on CD, CD - R, DVD, DVD - R or DVD - RW. But recently I installed windows seven, and since that day the drive won't recognize the DVD. I can still read and burn CDs and CD - R. I'm burning the same Virgin DVD-+ R/RW as before, but the drive won't detect them. Those I have already burn are not detected or the other.
  My computer says that the CD/DVD drive work properly and drivers are up to date.
  I tried to clean the lens, but nothing has changed. And I tried to reinstall the drivers, but I could not found for windows seven.

  Thanks for the help.

  Hello

  Have you tried to delete the upper and lower registry Filters >
  Pleas check it!
  http://support.Microsoft.com/kb/270008/en-us

  You will find the registry key where filters must be removed.

• Satellite 5200 903 does not detect the wireless adapter

  Hello everyone,
  I wonder if anyone can switch me to it...
  Since I reinstalled the operating system (my XP pro SP2) PC seems not detecting don't nor the wireless adapter in the device under network adapter Manager.
  Also the light of the flexibility wireless no longer not.
  I also have problems to access the BIOS to check if the card is detected there, have not a Toshiba HW setup in Control Panel as described in the manual.
  Any suggestions?

  Hello Juliana

  The question is how did you install the operating system? If you use the restore CD to install all tools including Toshiba HW setup. If the unit is pre-installed with the Microsoft Windows XP Home edition CD, you must install all the stuff of Toshiba late.

  Just a little explanation about the wireless network card. Basically, if the wireless switch indicator turns not on s clearly indicate on hardware problem. I guess that the wireless card is faulty. Also check if the card is listed in the Device Manager.

  If you want to enter the BIOS settings pres ESC key at the boot routine and keep it down for a few seconds.

  Good bye

• Satellite M40-276 - memory not detected in the Bios upgrade

  Hi people!

  New kid on the block!

  I have a client with a toshiba Satellite m40-276. I've updated his memory to give it a little more to play with...

  Went into the bios to see if everything was OK but no projected additional memory. I removed the new and old memory and put in the new 1 GB module and restart the computer.
  The bios has not yet changed the size of the old memory?

  Went to windows and of course that the memory has been detected it normally?
  I added the other memory module and went into the bios again, but no change it?

  Windows, however, recognized that the two modules?

  His computer is the same bios to factory and has never been updated.

  My questions are... why the bios doesn't recognize the upgrade memory? It will help in upgrading the bios?

  Enjoy all the suggestions I can get on this issue.

  Thank you

  bookie56

  Generally, if you upgrade RAM using tested compatible modules, that should be recognized correctly.
  We do not know what modules you use, and I guess that there is a compatibility issue.

  RAM on Satellite M40 276 can scale up to 2 GB of RAM and compatible modules are:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• Satellite Pro 4260DVD does not detect WLAN CardBus

  Hello

  I had a problem with my Satellite Pro 4200 PCMCIA, which worked very well with 2 cards different Ethernet but when I tried to use the WLAN, it could recognize only a SMC EZ Connect 2.4 GHz 11 Mbps Wireless Cardbus Adapter (SMC2635W). I'm now running on XP Service Pack 2 and the big question mark is that XP didn't detect all other cards except the SMC a WLAN.

  I tried the Linksys Wireless-B 2.4 GHz 802. 11B (WPC11 ver.4) and the generic IEEE802.11b WLAN CardBus card 2.4 GHz/11 Mbps but XP has not yet detected the card. The power of the map light was off and blinked only one time that when I plug. Both cards worked great on my old friend laptop IBM, which is finally older than my laptop. I bought this laptop 6 years ago and never had any problems with the front PCMCIA.

  I have worked on this issue with my friend for about a week and we have no idea if this is a hardware or software problem. I first thought that it might be the PCMCIA 16 bits problem but I think that the SMC card is also not the 16 a bit. I did update the BIOS but I don't think it will make all the differences, if I did. Please help me solve this problem that I'm dying to know what really happened. Thank you!

  See you soon,.
  TR

  Hello

  Well, the 4200 Pro Satellite does not for me but I found something on the Sat Pro 4220. This laptop supports PC - Card16 - bit PCMCIA and CardBus 32-bit (2 x PCMCIA type II) or 1 x PCMCIA type III
  In this case I don't think that it? s a matter of 16 bits.

  What you can do is to try to change the settings in the BIOS.
  In the "configuration" box, you can set the configuration of the device to "devices".
  In addition, in the "PC card" box, you can change the mode of the controller "CCIP compatible" or ' cardbus/16-bit' or 'automatic selection '.

  Try all the settings. Maybe one of them will be working.