Re: Satellite L750D - recovery disk installer fails

So, I bought a L750D Satellite today in a chain store.
They had a double the RAM for free offer.
There is no disk in the packae and when you start the laptop, it goes into windows 7 and asks if you want to install the 32-bit version or 64-bit.
I understand that this example uses a recovery of the windows installation to install the required version.

My problem is that it breaks down. It crashed on the first machine to which I took and it crashed on the second they gave me too much.

Now, I tried to use the Windows 7/repair of my desktop PC Installation disk and that does not work either. A friend suggested I bring the machine, re - install the original 8 GB of RAM and then redo the installation. I suspect that this might be the problem, like rising to 16 GB might be the problem when you use a Windows restore Toshiba seems to have adopted as the ONLY way to install the OS of the computer.

I'll try it tomorrow, but that someone has other suggestions that I desperately need to have this machine work tomorrow.

I read a lot of discussion about this stuff all over the web, but no solution beyond buying a disk recovery tool. Seems a bit of a scam really.

TIA.

Hello

First of all, I doubt that the 16 GB of RAM would be supported on this laptop.
Then it was wrong to upgrade to 16 GB of RAM, and I guess that was the problem, why the Windows system can be installed for the first time.

Second: the disks are not part of the package, because all laptops from Toshiba (also from other manufacturers) supports a recovery system. Means that you must create a clean recovery disk if you buy the laptop. There is a Toshiba Recovery Media Creator called tool that creates the recovery disk.

I'm not sure if the recovery files would be still available on disk HARD because you said that you tried to install win 7 using a disc belonging to your desktop PC, so eventually the recovery files are now removed.

However, check if it is possible:
http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm7

Otherwise: order the CD here:
http://backupmedia.Toshiba.EU/landing.aspx

Tags: Toshiba

Similar Questions

  • Satellite L30 recovery disk failed: could not do language input error

    I have a L30-101, which has been slow to turn on. Another forum suggested going in ms config to ensure the maximum memory used to initialize and uncheck that some elements to start. When I rebooted, windows icons have been expanded and slightly blurry, so I undid the changes I did but windows is still not clear. The laptop works well otherwise, so I recorded that restore data, I needed and tried a system, but the computer can't find any restore points.

    As a last resort, I tried the Toshiba product recovery disk which I had never used it before. He begins to read it ok, then asks for the choice of the English language. About 10 minutes later it stops with the error message "could not get a writing of the language of the INI file! Article: [Commom] key InstallCMD file D:\Setenv.ini.
    When I hit OK to clear the message the Administrator page says could not initialize the raid class no RAID-continue normally.

    When I restart the laptop it brings back me to my previous state with blurry icons, another way to work laptop and all my old data is still there.

    I have since bought a new portable Satellite L450D that I write this, but I'm eager to try to lift my L30 and working again as a spare. I contacted Toshiba UK in case there was a problem with the recovery disk, but due to licensing issues they can only redirect me to the support of EU toshiba backup site to buy a new recovery disk. As I already have a recovery disk, I don't want to buy another for the same results. Does anyone have ideas on how I could get the recovery disk to load entirely and recover my laptop to its factory settings?

    At first, I must say that you should back up all your important data to an external device like external HD or USB. When you use the recovery facilities disc all the partition is deleted.

    I don't know why you cannot use livery recovery disk, but the only thing to do is to visit nearest Toshiba authorized maintainer and show the problem. If they can confirm recovery DVD is defective, I assume that you will get a new free of charge.

  • Satellite C660 - recovery disk fails error 1117

    Please can someone help. I tried to use my recovery disks to restore my laptop when it kept not start correctly. The disks did not work so I bought a set of discs from Toshiba on this Web site. I still have the same problem.

    What the failed hard drive or something else?

    If I buy a new hard drive recovery disks will work if the hard drive is not exactly the same as the one that is out?

    Hello

    Have you thought about the HARD drive?
    It could be a malfunction of the HARD drive that does not allow you to install the system.

    I recommend that you check the HARD disk for some potential problems.

    There is a nice tool called Drive Fitness Test. You can use it to check the HARD drive.
    Google simply to get the software.

  • Satellite M100 recovery disk failing after loading ramdisk image

    Hello world

    I have a Satellite M100 (bought mid-2006), 512 MB RAM, 60 GB HDD, Intel CPU T2050.

    I decided to have a cleaning and use the restore disc to return the laptop to factory settings, and then reinstall only what I really wanted.
    I had this done yesterday, I had forgotten something, then he ran again about 4 hours later.
    The first time that the restore worked, now it reboots once the progress bar reaches full when he says "Loading RAMDISK Image".
    After the progress bar reaches full, the mouse pointer appears for a few seconds then restart the computer.

    Nothing has changed with the hardware or BIOS, and what is on the HD should not have any effect because I am booting from the DVD.
    Can someone please help? I am at a loss to explain what happened in this interval of 4 hours.

    Thank you

    Hello!

    I agree with Akuma.
    Sometimes I can read here on this problem and I know you should only remove the partition on the HARD disk. Therefore, you can also use a Windows XP CD from Microsoft or the FDISK utility.

    After you delete all the partition, you should be able to run the recovery disk.
    Check it!

    Good bye

  • Pavilion dv6: create recovery disk media fails

    The disk is failing - takes forever to start and the PC hangs when I try to access it using Explorer. I have another drive, removed the PC drive and mounted in a USB SATA disk drive.

    I can see the recovery partition, there look OK, contains a lot of files, among them a 22Gig. A file 'bootmgr' in the root and a startup directory, especially of the WIM file.

    Can I use this partition to create a bootable USB drive that can recover my OS on this new hard drive?

    I know that I can buy a recovery kit, but if I use it, I'll save some money and the day 6-10 wait as the press kit...

    Waiting with hope in my eyes

    Kind regards

    Kjetil

    Hello:

    Use this guide to learn how to create a recovery media:

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01867124&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0004

    It only works with the hard drive in the PC.

    Here's a way you can reinstall W7 by using the product key of W7 25 characters on the bottom of your PC case.

    Make your own plain W7 x 64 installation media.

    Here is the link to the download site of Microsoft for the W7 Home Premium 64-bit SP1 ISO file.

    http://msft.digitalrivercontent.net/win/X17-24209. ISO Windows 7 Home Premium x 64 English

    Make sure you get all the 3. XX GB of the file to download.  Sometimes it reports 'Download complete', but you do not have the entire file.

    Burn the file on a DVD using the option of the program of your burner burn DVD file ISO then the DVD is bootable.

    Or you can use this tool to transfer the ISO to a flash USB 4 GB or DVD drive.  The tool also performs the bootable media.

    http://www.Microsoft.com/en-us/download/Windows-us b-dvd-download-tool

    Then install the drivers and software available that you need your PC support and driver page.

  • Satellite M40x - recovery disk removes all partitions?

    Hello

    The new Toshiba satellite M40X I bought about 5 years and it came with the recovery disk. Now my system is slow and reflection on the running on it recovery disk.

    When I bought the system I think she only had one C: drive and later I partition on three discs. Now, I want to know that if I run the recovery on my laptop disk then it would remove all partitions because I took the backup of the c: only?

    Thank you

    Hello

    If you run a recovery of all data on local disk c and D; you be wiped. Thus, you must back up the important data before you start

  • Satellite A50 - recovery disk is not working

    Hello

    I'm trying to do a clean install on my laptop, but the recovery disk is not working.
    The files transferred to the laptop, but once done, I get an error message that says: "the system is not fully installed. Please run Setup again."

    Does anyone have suggestions as to how to fix it?

    It took me four days to get to this point and make me very frustrated.

    Thanks heaps

    Naomi

    Hello

    What is the installation using another CD; That is to say the Microsoft Windows XP disk?
    Have you tried that?

    In my opinion, this would help to pinpoint the problem
    The error message can be linked to different issues; I mean the HARD drive or a single partition problem could also be possible.

    Try to format the drive HARD whole again. Delete all partitions from the HARD drive and check if you can proceed with the installation.

    But if you will not be able to install the OS by using the recovery disk and other disks then a question must relate to a part of the material. (possibly HDD)

  • Impossible to use the Satellite L350 recovery disk

    I bought the recovery disc for my Satellite L350-370 followed instructions beginning now stopped program to "waiting for odd vacancies" moment for this strange worked perfectly.

    Laptop only if off now and no keys work.

    Help!

    I really don't understand what is happening here. I used the disc of recovery many times and I've never seen this message.
    By default the BIOS settings and restart your laptop. When the laptop starts up and you see Toshiba welcome screen press F12 repeatedly to enter the boot menu. When the start menu is shown on the screen, place the recovery in the optical disc drive disk. After doing this choose the CD/DVD drive and press ENTER. What happens when you do this?

    ODD must begin to read the recovery disk and you should see recovery on the screen menu.

  • Need XP for Satellite A210 recovery disks

    I lost the recovery disc for my Satellite A210, is it possible to get replacements? Thank you

    Hello

    Visit the Toshiba page under https://backupmedia.toshiba.eu/landing.aspx
    Here, you can order recovery disks. I don't know if you can order recovery for your Satellite A210 but you can check in any case.

  • For Satellite 5200 recovery disk does not work

    Hello

    I try to use the recovery for Satellite 5200 disk but it won't work. I have the recovery disk in the DVD player and I tried holding C and also tried to change the boot sequence by pressing F12 at startup to the top but he's not in it.

    Someone at - it ideas?

    Is there a problem with the drive while the OS is running? Try to use different bootable CD and see exactly what is happening.

  • Satellite A50 - recovery disk not recognized

    Hello

    I have a Satellite A50 who I am rebuilding. I insert the recovery disk came with the laptop. I get a window with the message
    "This recovery and Applications CD is not configured to work with this machine (laptop). This CD is for: Satellite A50. Please use the good recovery and Applications CD".

    I'm looking at this message. I look at my laptop with Satellite A50 wrote about it. And I don't know what to do next. Can anyone help?

    Thank you... Peter

    I agree with Bob. Mobo was traded in the past?

  • The Satellite A100 recovery disk + explorer.exe

    OK, I have 2 problems,

    1. I did a virus scan and deleted TI explorer.exe I had a look in the folder with the 7z file manager and it wasn't there, also when I try the new task: explorer.exe it says it cannot be found. I can't explorer.exe from the recovery disk?

    2. I tried using the recovery disc after I couldn't find explore and he loading and all, while mouse came, then about 3 seconds later just restart computer. It's strange because I used the recovery disc b4.

    Help would be greatly appreciated.

    > Can I get the recovery disk explorer.exe?
    No, because the recovery disk only contains an image file and it would not be possible to get only the explorer.exe

    > 2. I tried using the recovery disc after I couldn't find explore and he loading and all, while mouse came, then about 3 seconds later just restart computer. It's strange because I used the recovery disc b4.
    I put t know how you used this disc, but you can only use it in a sense. You can start only this recovery disk and this will lead to a new installation of the OS and the HARD drive will be formatted too.

    If you want to get the job of the OS so I recommend you either reinstall the operating system, or you can assign to the OS to the point of time at the beginning.

    See you soon

  • Satellite A200 - recovery disk problems

    I just bought the (all new store big tech) Satellite A200 for a few months and not used because I was on business trip to take. This weekend, I opened it up and running for a while.

    After that I read the manual and found that I need to create a recovery from the tools provided disk. However, the problem start here:

    1. when I click on "Recovery Disc Creator", a message is display "no HDD Recovery area!, the toshiba Recovery Disc creator cannot be launched."

    2 then I call center service support and to inform that there is a problem with the "recovery disk creator" and I have to retrieve the laptop using the hard drive partition recovery (waiting when 0 turning on the system) and the next step is complete:
    a. the laptop's boot in the recovery screen function.
    b. when I try to "restore windows PC" (option 3), it is display and error message on file not found.
    c. when I try to click on "restoring the recovery disk" (option 5), it asks me to put in the recovery disk which I do not have?

    NOTE: I'm sure that the hidden recovery partition is therre. 1.46 GB. There is no way that I can access the hidden partition from a normal windows vista screen (without drive letter).

    Then, I called the support center again (now what difference person support) and to inform you that:

    1. my recovery partition is corrupted and I need to get the recovery disk again (which I did not), it's going to cost me AUD $66 (I got from HP one and cost me AUD $15 and will be free if I come and Pick-up) for administrative costs. And it is a procedure.

    2. I explain to the support staff that it is brand new in the box laptop and I consider it as defective on arrival (DOA or FOA.

    3. I also ask what causes the problem and has been a consultant with the following reason:
    a. I may have deleted the partition accident (impossible because I still can start on the recovery partition, but can not recovery which all).
    b. There may be a virus infect in my laptop which was remove my recovery file in the hidden partition (ridiculous, you can delete some files in the drive on which you cannot yet access).
    c. I should create a recovery disc when the first time LAPTOP computer service. Which it is recommended, I get a question that if I do not, or I forgot to do so, this means that the software will automatically delete the system restore image file? I have no answer for that.

    State (when I try to post this messgae), I'm still waiting for the staffs of complaint call fomr back (very tie when you talk in support of service these days).

    NOTE 2: I would like to raise these issues, not because I want something (I do both IT support) complaints but I just want to solve the problem:

    1. is there some sort (software) allow me to access the hidden drive in and out of recovery disc image, my laptop still have the partition.

    2. is there a link I can download image recovery (in iso format) disc again? I've known it is not a question of wise, but when I ask the support staff that can re - install windows vista with the license key from the bottom of the laptop and has advised that it is not work or turn on.

    3. is there someone out there has similar problem

    Hi Thomas

    I have a European model A200 (don t know what you model is) and the A200 was NOT equipped with the option of HARD drive recovery! This means that you cannot create your own recovery disk!
    My laptop came with the Toshiba Vista recovery DVDs!

    Still is it that your 1.46 GB hidden partition is not the Toshiba recovery partition but Vista hidden partition. It contains the WinRE files that are useful for repairing the operating system if something will go wrong!

    Second, the Toshiba Recovery folder is too big for the partition of 1.46 GB!
    So it is not possible that it would be placed on this s partition!

    So finally, it seems that you will not be able to create the own recovery disk and therefore, you have to order it from the ASP in your country.

    Welcome them

  • Re: Failure of Satellite M30 recovery disk write sector

    Hello

    While trying to reinstall XP through the recovery discs, I get this message:
    write the result of power failure = 1 disc = 128 sectors 14975-15039
    and I am unable to continue.

    I would clean the disc using Darik Boot and Nuke (DBAN), but cannot get this to start. The only software that has started successfully is Puppy Linux (which works on the RAM as a live CD), so it is really not installing on the HARD drive.

    Have you noticed that there is option 2 on the recovery disk: Expert Mode of recovery, but I don't know how to use it.

    Any ideas?

    Thank you

    When you use recovery media that you have two options, a standard and expert mode. When you use standard mode that OS will be installed on a partition and you can not set anything before development begins. The whole HARD disc will be deleted.

    Using the expert mode, you can create a clean partition and also to install OS on already persistent partition.

    To be honest expert mode will help you any. If the HARD drive is not defective installation in standard mode should work too.
    I'm afraid that the HARD drive is there problem.

  • Satellite 5005 - recovery disk not recognized

    I'm trying files my satellite 5005-S504 but when I put the original disc, one in the computer does not recognize say 5005 series disc and is not compatible with this PC.

    Help, please!

    Can you tell us more about your laptop?
    Is this laptop your day or you have bought used?
    East - the first time that you use the recovery disk?
    Maybe is exchanged mainboard?

    In any case, visit Toshiba US page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp for assistance

    There you can find description and DMI tool how to use it. After using this tool, the motherboard will have good information. Before the start of the recovery procedure this information is compared with the information stored on the recovery image. If these two pieces of information are the same, you will be able to install the recovery image.

    Surroundings and good luck

Maybe you are looking for