Re: Satellite P200 - FN The keys causes a BSOD

Similar Questions

• Satellite P200-RT1 - FN keys do not work after downgrade to XP

  Hello
  I have a Satellite P200-tn1, PSPBOC.
  I lowered my operating system from Vista to XP.

  Now, I have a driver problem, I installed all the drivers for my computer. I installed all the HotKey utility for my computer as well and I have a question. Some of my FN key functions do not work. The ESC to F5 functions work, but all the functions above are not.
  I'm really looking for the brightness of the display and dimmers keys F6 & F7 to work, if possible, I would also like the button toggle F9 key to work as well, which, from this moment, they do not.

  I was wondering if there is a driver I'm missing and if the driver is there. I took my computer in three computer stores now and no one can understand this. Please help me!

  Thanks Ken.

  Hello

  It seems that your laptop is a Canadian model and as a result, you can download the drivers on Toshiba Canada website:
  http://www.Toshiba.ca

  The problem is that I can't find Windows XP drivers on this Web site. :(
  The only way I know, is that you try the drivers and utility on the European site. Normally, the models are very similar and maybe it works. It s worth a try.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  Try to download and install controls (pilot) and Toshiba Accessibility.

  Welcome them

• Satellite P200 - need the drivers of SD card and Win7 Tochpad player

  Hello everyone,

  I own a Satellite P200-1E9 PSPB3E and installed Windows 7 Professional 32 bit. All right, but I have 2 small driver problems.

  First: my touchpad works, but I can't scroll the text or on the internet! Where can I get the driver for the touchpad? Should which driver I use? I have to search for a driver, but can not find!
  Second: my SD card reader does not work. No drivers on the Toshiba homepage!

  I hope you can help, thx :-)

  Hi clemensgroh,

  In your case, I'll try the Vista drivers. I did the same and they worked for me. You can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  There you can get the Flash Media Driver and Touchpad driver. :)

• Satellite C660/C660D - shift key causes the screen to go black

  After purchasing the Satellite C660/c660D less than a month ago.
  I am disappointed to see the SHIFT key (left), as well as the CTRL pressed, causing the screen to go black intermittently when you type my blog...

  Course not blogger like tested also in word.
  All the ideas that is weak given the reviews and prices...
  Help... dosnt do it every time, but most of the time. Not happy!

  It is a fault, I don't expect this brand

  Thanks for any help

  Hello

  > I am disappointed to see the SHIFT key (left) and the CTRL pressed, causing the screen to go black intermittently when you type my blog...

  What does this mean exactly? Press SHIFT and CTRL button turn off the display, and you are not able to see anything on the monitor?
  Is this good?

  Have you checked if this happens with the help of an external USB keyboard too?
  If this isn't the case, I guess that your keyboard is malfunctioning and needs to be replaced.

  One of my friends had a problem with my keyboard. The cursor jumped around and some characters are displayed two times this could be resolved by the BIOS update I m do not know if your laptop uses the latest version of the BIOS, but you can check this too.

• Satellite P200 - 144 FN keys do not work

  Hello

  I have a dual-boot configuration, and I came across a problem. I have XP and Vista installed, and the FN keys do not work under XP. I had a look at the manual and it said something about Fn-Esse. Can someone help me solve this problem?

  Thank you
  Neo-Tech

  If I m not mistaken the P200-144 belongs to the series PSPBGE and European Toshiba driver page doesn t provided no details on the FN-Esse driver or something like that

  As far as I know the Hotkey Utility driver must be installed to control and use the FN keys.
  Also note that the driver installation procedure is very important.
  If you install drivers or utilities in the wrong order and then some features could not work as should.

  On the European driver page, you should find a txt file called installation instructions.
  Follow this order, and install as mentioned it.

• Satellite L750 - what the key features of FN control tool?

  my brother, what is the name of the driver fn which allow you to display the f1-f2-f3-f4-f5-f6-f7-f8-f9-f10-f11-f12
  on the screen

  Toshiba Satellite L750-169

  You need to install additional package from Toshiba.

  This package contains several tools and utilities, and what you need is utility of flash cards.

• Satellite U405 - pressing the keys of enlightenment start the laptop

  When the computer turned off, if I touch the light keys / multimedia, the computer starts.

  This is especially problematic because the computer starts even when I just close the lid (because illuminaton keys are activated by the lid itself).
  Any suggestions? If not how to solve the problem, could you please tell me how to turn them off?

  I don't think you can turn it off. If the button is feeling a press when you close the lid, perhaps the jury of the sensor must be replaced.

  I would like to send the laptop to an authorized Service provider to get that replaced part. There is a list of the ASP on the Toshiba site in the support section.

• Satellite P200-1I4, the graphics card can be changed/updated?

  Hi, recently bought a laptop and was wandering if I could install a better graphics card in this model? It came with: Intel GMA X 3100

  THX

  Hello, Tommy

  Unfortunately graphics card can not be changed or updated. Hardware for laptops is designed on a different path with respect to the workstations and the graphics card is part of the motherboard.
  Sorry but there is nothing to do.

• Satellite P200 - after the BIOS update I can't start the machine

  After the BIOS update I can't boot the laptop because the system doesn't recognize the relecommunicarions password.

  Before updating the password is 0000.
  After when I try to set the password incorrect password start apeeras

  The BIOS password can only be removed from an authorized service provider. So I think that there is no other way.

  On the Toshiba site, you can search the nearest:
  http://EU.computers.Toshiba-Europe.com

• Satellite P200-RT3 - the screen turns black during the Vista installation

  Laptop worked very very slow for a while (everything worked very well - just very very slow), so I decided to restart costs after the support of all my data to the top and make the factory since HARD drive restore.

  The recovery is going very well and then after restarting Vista and is preparing to launch for the first time (prob trying to load the graphical interface of Windows), display dies - black towers with some artifacts along the top of the screen. Restart in Save Mode does nothing once it is in mode safe is it says that "Windows is unable to complete the installation in mode safe process - please restart." Restart normally translates into artifacts, like LKG configuration.

  Think something went wrong, I did the whole process again with the same result...

  Thinking the recovery partition is buggered, I grabbed a Vista Home Premium disk and installed from there... same result.

  Think display Vista drivers are buggered, I installed XP Home to rule out the possibility of a crystal display liquid buggered... XP installed fine.

  Try the recovery again... no luck.

  Hello

  Just FYI: you can create a recovery disc yourself. You know about it?
  You must only start the Toshiba recovery disc creator, which is preinstalled on your laptop. You can find it on start > programs > TOSHIBA.

  The Toshiba Recovery disk contains an image of the factory settings and it s identical to option HARD drive recovery but the drive erases the entire HARD disk.
  In my opinion, the disk is very useful, because if your drive HARD get faulty and you need a new one you can restore the settings from the factory with this disc.

  Anyway, if you have a problem during the installation of recovery, you should go to an authorized service provider. It could be a hardware malfunction, because a mistake shouldn't t normally appear due recovery facility.

• Satellite L350-20F - Windows Defender causes a BSOD

  Hi, I hope someone can help me with this problem.

  I bought this laptop in February and within 4 weeks it developed a memory problem and had to be sent back to Toshiba.
  2 weeks later, the computer was returned.hen I got home I started to reinstall and restart it as a new machine and got this error message associated with Windows Defender
  ... * 0x800106ba *.
  By phone, Toshiba engineer wiped the drive and the system was reinstalled via pre purchased the recovery disc.

  The same error message returned on startup so I'm completely at a loss.
  *
  Help!

  Thank you

  Hello!

  I think that the problem is not the laptop, it s Windows Defender that is causing the problem.

  I searched using Google with this BSOD code and the first result is this link to the Microsoft Knowledge Base :)
  http://support.Microsoft.com/kb/931849

  I think that this could be useful for you to solve this problem.

  Good bye

• Why the AHCI mode is disabled in some models of Satellite P200/205?

  Hello.

  My laptop model is Toshiba Satellite P205-S6277 (PSPBGU-00W016B). Chipset Intel 945 PM Express, Intel 82801 GBM (ICH7-M).

  According to the information of the intel.com my laptop processor / chipset are fully compatible with the AHCI mode. But my SATA controller works in IDE compatibility mode and there is no way to enable AHCI SATA mode in the BIOS.

  So I have two questions correlated.

  1. why this AHCI mode is completely disabled by the BIOS? Is it possible to activate this mode in future versions of BIOS?

  2 If this mode is completely disabled by the BIOS in the models of laptop of all PSPBG and PSPB0 then why Intel Matrix Storage Manager (driver that improves the functionality of the AHCI mode) is available at downloads driver recommended for these series of laptop on sites European Canadians, Toshiba and even specially for my Toshiba laptop model on the site?

  I already posted the same question to the site we Toshiba but unanswered for a month.
  Maybe there is someone who is able to answer this question?

  >.. There is no way to enable AHCI SATA mode in the BIOS.
  How you tried to activate it exactly?
  I have Satellite P200 and the two modes are available. I have model laptop but can not imagine that the AMERICAN models, or models even Canadian work on a different path and BIOS must be the same.

  Toshiba service best place where you should ask for help. Call them and ask for explanations. If you are right and the AHCI mode is unavailable, they know why.
  Over the past 3 years I have worked with 4 different laptop models and all have absolutely identical SATA settings.

• Satellite P200-199 4 GB Ram upgrade

  Nice day

  I'm trying to upgrade a satellite P200-199 2 X 1 GB Ram to 2 X 2 GB Ram. DDR2

  When you install the new 2 X 2 GB of Ram, the computer will not start upward.
  If I install 1 X 2 GB of Ram, the computer starts.
  If I install 1 X 2 GB and 1 X 1 GB (orig) of Ram the computer does not start.
  It seems that the laptop is limmited to 2 GB.
  I verify that this is the last BIOS update v1.7

  Is there a way work about to run with 4 GB of RAM

  Thank you.

  Hello

  According to the data sheet Toshiba Satellite P200-199, the laptop supports my 2 GB RAM
  http://IL.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?DISC_MODEL=0&action=PRI NT_WITH_BACK & LNG = 29 & service = IL & PRODUCT_ID = 132098

  4 GB of RAM is not possible

• Bad display on Satellite P200

  Hello

  My P200 under Vista has a terrible display, all the fonts are blurry and in general, the view is terrible.
  I tried to change the display settings of but nothing seems to make any difference.
  All of the suggestions.

  Thanks in advance, IanB

  I use the Satellite P200 almost a year now and all I can say is: use recovery media, install the original recovery image and be happy. I don't know how long you use your P200 and as you have driver display, but for your problem, I have three explanations:
  -You use some bad graphics driver
  -L' display is faulty or
  -You need glasses

  Please don't be crazy for my last comment. It has nothing with your person directly. I just wrote about my own experience. Satellite P200 has the glossy LCD screen brilliant (TruBrite) and using the standard display (1440 x 900) resolution image on the screen is quite clear.

• Satellite P200-10s - problem with the Tilde key

  Hello

  I recently bought my laptop and installed a game (Oblivion) and in this game, we can call the console of the game but I can't call because the key does not work. The Tilde key about 1. I have been googling and noticed that a lot of people with windows vista on laptops have this problem... can someone help me?
  Is it possible that key hangs on the mode full screen?
  (Sorry my English)

  Thanks in advance,
  Francisco

  Hello Francisco

  This game is not known to me, but it will be interesting to know if this game is designed for Windows XP Home edition or Vista operating system. In any case if the same question is noticed by many other users of laptop I don't see any solution here. It seems that the problem is not caused by laptop faulty or something similar. If your laptop works well, you game homepage and see if there is a solution.

  Manufacturers of laptops have noting to do with it.