Re: Tecra M3 - processor replacement

Similar Questions

• Tecra 8100: Advice replace please - audio card?

  My 8100 Tecra faithful and beloved which is ideal for my purposes locked up the other day, in the middle of a session.

  Restart windows resulted in blocking machine once Windows is running.
  I started in safe mode - no problem.
  I have disabled all devices useless and then through a process of elimination of selectively allowing devices and reboot.
  I found that the problem was the Yamaha audio device - that turn on the machine and it would lock up, disable that and he would normally go.
  It worked fine now for a day with the disabled Yamaha audio device.
  I tried to uninstall/reinstall the device - no change.
  I even did a fresh install of XP - no change.

  I ran XP pro for over a year without problem (so far) and I consider not audio as criticism - just a nice to have.

  My questions are:

  Is there anything else I need to do in the way of diagnosis?

  Tips for common problems?

  Can anyone with experience of fixing these machines or similar notice if replacement of all of the audio card is likely to make a repair?

  I seem to remember the last time that I opened it about two years ago to change the processor that the audio Assembly was on a separate panel but is that all?

  Note that this is a _ancient_ machine and _not_ going to be taken to a repair shop where the Bill would be more that it is worth! I am competent to replace the sound card, more than that and I will probably continue to run without audio - I don't think that it worth replacing the motherboard just for audio...

  Thank you very much in advance for any constructive suggestion.

  Well, as you know these replacements are very delicate
  However, I don t think you will be able to replace this sound card but it s my personal opinion.

  From my experience, I know that the card (audio driver) his Yamaha is not fully compatible with Win XP SP1 and SP2. Update the audio driver is necessary.

  Google for it

  I searched a bit for some instructions how to remove these boards and found this page.

  There you should find a link to the page how to disassemble the Tecra 8100.
  http://repair4laptop.org/disassembly_toshiba.html

  Greetings

• Tecra A2 - keyboard replacement

  Hello

  Looking to replace a keyboard on an A2 and would like to know the part number to make sure that I get the right pair.

  Also A2 all models use the same keyboard

  Thank you very much

  Hi Mike,.

  Don't know what country you are, but searching on Google for "TECRA A2 KEYBOARD" produced several successes, including the United States 'Spare parts warehouse' which lists a single keyboard for the Tecra A2 (part number P000392120). This also seems to be compatible with the many other laptops Toshiba.

  It seems strong enough to bet that this keyboard would be compatible with your A2.

  HTH

• Tecra 8100 - processor/memory upgrade

  Thanks for the help with previous enemy of apology from answers not responding not pc crashed.

  have cannabilised ibm t22 and equipped with 512 ram pc 100 to tecra no idea why, I kinda figured that pc100 is overheating as sage pc100 memory chips, the processor is a 900 I adapted this tecra 600 instead and he sees it only as a 700 despite being a fsb 100 very happy with the gain processor but confused on the question of temp memory It works a HDD 40 gig and xp with a fine dvdwriter, outside temp issue, ideas, thanks

  Hello

  Do you know why laptop manufacturers recommend users to use just original material or tested upgrade parts?

• Re: Tecra A9 - 11M - replace the HARD drive with a larger

  I have a Tecra A9 - 11 M with Windows XP Professional installed. I would like to replace the hard drive with a larger drive and install Windows 7 Professional.

  Any suggestions on recommended records say 500 MB?

  Difficulties to install Windows 7 on this model?

  Hey,.

  > Any suggestions on recommended records say 500 MB?
  I assume you mean 500 GB and not 500MB, right? ;)

  Well, the Tecra A9 already supports SATA interface and there is no limit of capacity on SATA interface, so you can install a 500 GB HARD drive or more (750 GB, etc.). Just make sure that it s 2.5 SATA HDD.

  You can choose each brand of HARD drive because each model will not work. You can buy a Toshiba HDD, Western Digital HARD drive or another. No problem ;)

• Hp Pavilion dv6-3078tx processor replacement

  I have a Hp pavilion dv6-3078tx which is almost 3 years. I was wondering if I could replace the processor because it is quiet, slow, I currently have an i7 processor intel core 720qm 1.60 ghz which is very bad: (.)

  Manufacturer: Hewlett-Packard

  Model: 1448

  Chipset: bridge intel dmi host

  SouthBridge: Intel HM55

  I am looking for a better then the i7 Proccesor intel core 720qm and has 2.4 ghz or more.

  Thanks in advance

  * Click on the star of CONGRATULATIONS on the left say "thank you."
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c02657339.PDF

  Processors supported are in Chapter 1, page 1.

  The best you can do is the i7-840QM

• HP G62-355dx processor replacement?

  Hello

  I have a HP G62-355dx with windows 7, 64-bit and an AMD Athlon II Dual - Core P340 processor!, I would like to know if one can replace the processor with an AMD Turion 64 x 2 Dual - core T-60 processor 2 GHz?

  Thank you very much!!

  Hello

  You can find a list of processors supported on the following manual #1 page:

  http://h10032.www1.HP.com/CTG/manual/c02641795.PDF

  Kind regards.

• HP pavilion dv6-2115sa card mother and processor replacement

  Hello world

  I have a HP Pavilion DV6-2115sa

  Product number: WB330EA #ABU

  It is out of warranty and one day when he began cutting during the boot. I brought it to a local store and they gave me a ridiculous price for a replacement motherboard.

  I came across one with HP Pavilion DV6-2113sa auction to sell for a small price with a motherboard completely functional.

  I wanted to ask if it is possible to move the motherboard for my laptop and possibly putting my processor in the new motherboard?

  I would very much apreciate any responses as the id would like to know if there is any time to do the 2113sa?

  [removed s/n of privacy]

  Hello:

  I would speculate that it is certainly possible.

  Here are links to the two models.

  http://support.HP.com/US-en/document/c02054970=

  http://support.HP.com/US-en/document/c01977848=

  I would say that they have the same processor family that they have the same motherboard.

  Paul

• Tecra A11 - 1EG replacement RJ45 Port

  Hi all

  Can someone point me in the right direction until you get a replacement RJ45 port accommodation as the current broke restraints.

  Thank you very much

  Craig

  As much I know RJ45 port is soldered on the motherboard. If you need to disassemble the computer laptop everything, delete the port, find new and solder on the right place.
  You want to do this alone? I mean you have experience with this sort of thing?

• Re: Tecra A11 - 1FM - replacement RAM

  Hi all

  I have a Toshiba A11 - 1FM with standard memory: 3 072 (1 024 + 2 048) MB with technology: DDR3 RAM (1 066 MHz)

  I want to upgrade to:
  8 096 (4 + 4) MB with technology: DDR3 RAM (1333 MHz)

  Is this possible?
  This module of memory RAM can you recommend?

  Thanks in advance
  Nenad

  According to specification for laptop, your laptop can be upgraded up to 8 GB.
  You're right about the modules inside. There are two DDR3 1066 MHz (PC3-8500) modules.
  You can upgrade RAM to the maximum level, but you must use compatible modules only.

  There is no sense to use faster RAM if the FSB speed is slower. You can use faster Rams, but they will run with low speed. Original use and 100% compatible RAM.
  Compatible 4 GB of RAM for your laptop Tecra has PA3677U-1M4G part number.

  Buy two of them, share original modules and everything will be OK.

• Tecra A2 and replacing the screen

  Hello

  Looking for help if possible

  My son has an A2 which has recently developed a display:-((, nous avons vu sur ebay un écran de remplacement (LMT14C502U) after that problem a little research was reported as a compatible replacement we bidded one won :-)), the replacement arrived complete with inverter.) When we arrived to replace we found we cannot :-((, the original screen is a N141XB-L02 and the connector is different.

  The question is is it possible to buy either a cable sheet which should be or is it possible to get a PIN for the various screens and convert the existing cable?

  Thanks in advance

  Notebooks are specific products and parts are adapted on a particular model. This means that you must use original parts.
  It is unclear to me that you can use different hardware components and simply connect with certain cards.

  If you want you can contact the nearest Toshiba authorized provider, but I am sure that they will confirm what I wrote to 100%.

• DV7 3010eg card mother and processor replacement

  I want to change my HP Pavilion DV7 3010eg motherboard and processor. As well as the graphics, if possible. Need suggestions. Please guide so I can do.

  Well, you can certainly to some extent, but the question is whether you should. There is no Motherboard upgrade. You have the best AMD motherboard that can fit in the plastic case, with the highest card and the best video. You can upgrade the processor to a:

  AMD Turion™ X 2 Ultra Dual-Core M640 35 - W, 2.60 GHz with 2 MB of L2 cache

• Tecra S5 - after replacing the HARD drive I can't install Windows XP

  I can't boot from the CD, I tried booting from CD via BIOS, by pressing 'C' but I had no luck.

  Any ideas?

  Hey Buddy,

  What disc you are trying to start exactly?
  Have you tested different discs?

  You should check the boot order in the BIOS. Configure the CD/DVD drive as first boot device and test it again!

• Noise noisy fan on Tecra R850 (HDD vs SDS)

  _Computer_
  * OS *: Windows 7 64-bit
  * Toshiba * Tecra R850
  * Processor *: Core i7 2620M Sandy Bridge
  * AMD HD6450M Grafik *:
  * BIOS *: version 3.90

  Gentlemen.

  in our society, we use the portable Toshiba Tecra for 3 months.
  The fan noise is to us aloud, you always hear the fan sitting a meter away from the computer (no CPU load).

  What helps a little was to change in the
  Control Center Power Options (change Plan settings-> change advanced power-> TOSHIBA Power Saver Settings-> cooling method settings * to * + battery + Optimized).

  But you can still hear the fan turning at 40%-45% when the CPU/system temperature is 40 degrees Celsius.

  On the guy last week also receives a new laptop of Toshiba R850, it is very quiet.
  The difference is that, in his notebook, an SSD is installed (instead of a HARD drive).

  If the SDS make the difference of fan noise? (we do not believe it).

  Maybe someone has had the same experience and has a solution?

  Thanks in advance

  Respect,
  VILSG

  Hi Paulo

  Thanks for the useful comments Paulo. Are there more positive things after replacing HARD drive?
  You may notice faster access to the SSD and performance of mobile in general?
  What is with the consumption of energy when you use your battery Tecra?

• Tecra M2 PTM20E Wireless problem.

  Hey

  I just bought this laptop that was used I installed very different drivers for the wireless, but none of them work. I also have a problem with the battery.

  I think there is a problem with the network card if yes is it difficult to replace?
  Thanks for any answers I've attached screenshots here below

  http://Tinypic.com/r/246883k/6 - network driver cannot click anything that nothing works

  http://i45.Tinypic.com/fdesya.jpg - problem battery sound in a foreign language, but it means windows can't find a driver for battery

  http://Tinypic.com/r/2vtnm7a/6 - no internet connection that you can see that the window is empty

  http://i49.Tinypic.com/bis86c.jpg - home edition everest showing the map as a one intelPro.

  Sorry for the foreign language: P

  One of the photos shows the network cards and it seems that your Tecra supports processors Intel 2200 802.11 B/G WLan card

  Go to Device Manager and check if the WLan Intel 2200 card is recognized.

  If it s not, install the driver WLan Intel (Intel PRO/Wireless 2200/2915) which can be found here:
  http://APS.toshiba-tro.de/WLAN/?page=downloads

  the first photo shows only Intel ProSet is just and only the tool for configuring Intel Wlan driver and NOT so possibly the driver WLan is missing.