Re: Tecra A11 - 1FM - replacement RAM

Similar Questions

• Tecra A11 - 1EG replacement RJ45 Port

  Hi all

  Can someone point me in the right direction until you get a replacement RJ45 port accommodation as the current broke restraints.

  Thank you very much

  Craig

  As much I know RJ45 port is soldered on the motherboard. If you need to disassemble the computer laptop everything, delete the port, find new and solder on the right place.
  You want to do this alone? I mean you have experience with this sort of thing?

• Tecra A11 with 8 GB of RAM, installed as shown in 64 bit 32 bit with 2.98 RAM usable

  Tecra A11, new March 19, 2011, with the first installation? good word? Windows 7 Professional. Setup was easy. Open the computer, turn it on, follow the prompts, select the check box for 64 - bit, etc.. But present in control PANEL / SYSTEM AND SECURITY / SYSTEM as having a 32-bit operating system with 8 GB of RAM, RAM can be used WITH 2.98
  .
  Has no disks to reinstall from. No partition to leave. Listening to the phone Toshiba menu system, I can create Media Recovery disks from the computer, but if it happened once it happen? Tips on where to go from here please.

  Still have access to the previous, Toshiba laptop with Windows 7 Home Premium but also so can transfer all the data that it and start over.

  You have created a set of recovery using the Toshiba Recovery Disc Creator disks?

  Make boot from disk 1, and then select 64-bit when prompted. See how it goes.

  You can also update the BIOS because it is a new model.

• How to replace RAM on Tecra M9?

  Hello

  Anyone can help explain how to replace RAM on my Tecra M9L - 12K. Returning more I can see the most obvious place where the RAM would be installed but there is only 1 slot SODIMM here. The other is where and how can I access this? Sorry if this is a thread answered elsewhere, but I can't find the answer - maybe you could move me if this is the case?

  Help gratefully received

  Please download the user manuals of the Toshiba support page under http://eu.computers.toshiba-europe.com > Support and downloads and see page 59. You will find detailed how explanations do.

• Support for the maximum RAM, the Tecra A11

  Hey the Toshiba Experts,

  If I buy a Toshiba Tecra A11 PTSE1A - 07G 005, model and on the site it says it's only 8 GB expandable. I wonder with a flash BIOS or the firmware update, if it could support 16GB?

  Possible or impossible?

  Is not possible. It does not depend on the version of the BIOS, and the BIOS update will not change anything.

• Tecra A11 - less than 10 ips in Skyrim on

  Hello
  I have a Tecra A11 i7 which came with a wiped HARD drive
  I installed win 7 pro and the drivers from the Toshiba site, including the pilot Intel Turbo Boost Technology.

  Even with all the settings set to low temperatures, vid Skyrim runs only less than 10 frames per second.
  I upgraded 4-8gig ram, but this did not help.
  The GPU is Intel, so I can't use Geforce experience.

  I have a Dell Vostro V131 i5 which takes place to better Skyrim.
  But the screen is smaller and i/o ports are 90% of dead, so I'd rather use the Toshiba.

  There are 4 "unknown devices" in Device Manager, but none of them look relevant.

  Does anyone have any ideas?

  Thank you

  To be honest, I have no reasonable explanation because I don't have this video game and can not test it on my Tecra A11 - 19M.
  In my opinion this Tecra is typical business very bad for the games and the machine for office work.
  It does not offer good graphics performance and it is not the best for gaming.

  I use it for daily activities and games use different model Satellite P with nvidia GPU.

• Tecra A11 PTSEOU: Some keyboard keys not working not

  Hello

  In my Toshiba Tecra A11 PTSEOU - 08904L model, some of the keys on keyboard did not, initially, key 6 did not work. But now about 12 keys did not work.

  When I press one of these keys, I hear a single beep and nothing happens.
  Even I can't see the bios menu when you start the computer as "press f2 for boot menu".

  Is there something to do with the bios for this problem?
  I tried updating the bios, but the installation failed saying incompatible bios. Help, please

  Thank you
  Thawfeek.

  > Is there something to do with the bios for this problem?
  BIOS? Why ORGANIC?
  I assume that the problem of its equipment and you will have to replace the internal keyboard.

  Just to confirm the problem with keyboard: you can connect external USB keyboard.
  In case the external keyboard would work correctly, the problem is related to the internal keyboard.

• Tecra A11 - cannot burn CD - R

  Hello

  My Tecra A11 with Win 7 Pro 64 and a carpet * a DVD-RAM UJ890AS is not able to burn on a CD - R. CD - RW and DVD no problem, but when you try to burn a CD - R I got following error Code: 060277-26 - 2A 031000

  I tried the solution in
  http://forums.Toshiba.com/T5/computer-troubleshooting/error-code-380381-26-2a031000/TD-p/172666
  -without success. There is no filter in case key in my registry.

  I have tried 3 different brands of CD - r, I tried CDBurnerXP and the Toshiba Disc Creator - still the same error. It is written (copy of a music CD) track list, then the error pops up. The CD - R is not usable more after that.

  What can I do? Is it possible to Flash the firmware of the drive from DVD - if yes, where can I get the fw?
  Thanks in advance!

  Hello

  Have which brands you tried?
  I use TDK R and they work properly.

  In addition, I recommend the alcohol laser lens or cotton cleaning tip.
  Has also had problems reading and burning the discs that have been fixed after cleaning the lens.

• Re: Memory video Tecra A11 - 10 d

  Hi all

  I have a Tecra A11 - 10 d and in windows it show that my graphics card uses the 1200 MB of RAM as shared video memory. I didn't need as much memory for my graphics card, I think 256 MB is enough tacking into account that the onboard card has 64 MB of memory dedicated video.

  Now, on all computers, I know that in the bios, there is an option to set the RAM to the video card, but I don't see this option in the BIOS of my computer. I think / hope that an updated bios gives me this option. On the drivers download section I see a new BIOS, but I don't want to flash until I see the BIOS updated specifications.

  Can someone point me to such a document?
  Has anyone had this problem and resolved?

  Thank you
  Dan.

  Hello

  as I know, the video card will automatically if capture the amount allocated portable RAM. I doubt that you can make adjustments yourself. In the Bios of the Pc desktop, you can do as there is an option for the allocation of memory video card. Reflash the bios will not help you.

• Tecra A11 - space keyboard key issue

  Just wonder, if someone with an A11 has similar problems or my keyboard needs to be replaced.

  When I type, very often the space key is not accepted. Very annoying when you type without looking at the text of all time.

  Hello

  I m not Tecra A11 owner but on my other laptops Toshiba, I have never had a problem with the keyboard. Each key will be recognized properly if I press on it.

  I guess than your Tecra A11 is fairly new so it of still under warranty. Please contact the nearest authorized service provider. Guys can replace the keyboard because there is no unique key.
  But don t you worry not about it, it is covered by the warranty. :)

• Tecra A11 & Express Port Replicator II - USB problems

  Hello

  I'm having a problem with a port replicator that I simple couldn't have resolved for months. I'll try to explain this as best I can.

  We have a Tecra A11, which seems to work fine running on Windows 7 Professional. When the Tecra A11 is pluged in an Express Port Replicator 2, not USB ports in the port replicator's work at all. Very good cell phone fees and the LAN switches on the replicator fine, but the USB ports simly does not work under any circumstances. It would also be interesting to note that the green light next to the "eject" button lights never really.

  I downloaded and installed the latest series driver for Windows 7 from the Toshiba support page which has no effect. We had 2 replacements for Toshiba because they also agreed that the previous, we had were not woring correctly, but this obviously was not the case because we still have the same problem with our 3rd unit. The Tecra A11 was sent back to Toshiba with case notes clearly describing the question, and he was sent to us "no fault found".

  Unfortunately, we don't have any other laptops to test on the port replicator. but I'm seriously suspect that the problem lies in the laptop, rather than the port replicator. For any idea or suggestion will be greatly appreciated.

  Kind regards

  Steve.

  Hello

  According to your message, you are not sure if the problem is related to the defective laptop Tecra or express port replicator.
  Hmm theoretically the problem might be related to defective express port replicator or Tecra.

  If found some information on the USB ports and the repliators port:

  + Make sure that the element of Legacy USB in the BIOS emulation is set to "Enabled". This feature only works for the keyboard and mouse. Also note that the keyboard and mouse must be connected before you start the computer. A USB mouse, keyboard or the floppy drive connected to the Port Replicator via any other connection that a hub of the first level, will not work until the operating system has started. +

  I also recommend to check the version of the BIOS; If the most recent BIOS is available, then you need to update this

• Tecra A11 - 15 d: possibility to get a keyboard without a block number?

  Hello Forum

  Is it possible to replace the keyboard of a Tecra A11 - 15 d with a keyboard without a block number?
  (In general I prefer the keyboard without a block number)

  Thank you very much for your answers!

  Concerning
  Andi

  Hello

  I don't know if the other keyboard without the numeric keypad would be and would be compatible m.
  But if this replacement would be possible, then, you'd be able to get the part that is compatible with a Toshiba authorized service provider in your country.
  So I recommend you to get in touch with an ASP and ask for this keyboard replacement. Maybe you will get such part

• Re: Unable to run the HARD drive recovery in the Tecra A11

  My laptop is a TECRA A11 - 1 8 PTSE1E-07-J044AR with processor i5, 4 GB RAM and running Windows 7 64 bit. Recently I had a problem with one of the user (desktop profile) profiles and has not been able to create one despite several attempts, so decided to reformat to the factory settings. But nevertheless I tried the procedure, he went only up to the Boot Manager settings. After that, the warning screen never comes to the top and the laptop eventually normal startup.

  So I decided to ignore the recovery of HARD drive and installed Windows 7 32 bit through a CD of formatting of the main partition to C: drive, but keeping the recovery partition, just in case. Now, even if Windows installed fine, however, none of the drivers (LAN, WiFi, video, sound, etc.) are installed.

  Now my questions are:

  1 can I reinstall my old Windows 64 bit through the recovery of HARD drive? If so, how?

  2. can I continue with the newly installed 32-bit Windows and just install all the necessary drivers and utils from Toshiba? If so, where the sources?

  Would be grateful for any help.

  > 1. Can I reinstall my old Windows 64 bit through the recovery of HARD drive? If so, how?
  After the clean version of the OS that it is not possible to install the recovery image using recovery option of HARD drive due to lack of repair my option computer start-up advanced options (F8 at startup).
  You can install recovery using recovery DVDs image only. Did you create this recovery disk?
  > 2. I can continue with the newly installed 32-bit Windows and just install all the necessary drivers and > Toshiba utils? If so, where the sources?
  Of course you can do it. If Win7 32-bit is supported for this laptop model all the necessary drivers, the tools and the utilities that you can find on the download page of Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• Tecra A11 Touchpad Windows 10 questions

  After upgrading my Tecra A11-182 (PTSE0E-0LP046GR) for Windows 10, I have problems with the touchpad. The cursor jumps from time to time in other places on the desktop, as in Word 2010. Y at - it a new version of the driver for this device? The Windows Device Manager indicates that the most recent driver is installed. Thank you for your suggestions

  Achim

  The cursor jumps because your palm makes contact with the touchpad while you type.

  The advanced settings of Touchpad has an option called "Disable tapping" or «Disable the Touchpad when typing»
  If you do not have these settings, you must update the driver for the Touchpad (Synaptics or Alps) that is compatible with Windows 10.

• Tecra A11 - 1EG - cannot be accessed after the supervisor setting BIOS password

  Hello, I would like to know if anyone can help?

  We have started to put a supervisor on our laptop Tecra A11 password so that our students can not set passwords on the hard drive, etc.

  To enter the BIOS and set a BIOS password, press us F2 that the machine starts.
  Then we go to the security option, then supervisor password.
  After entering the password we use twice, press us F10 to save etc.

  The machine starts ok and will windows smoothly.

  The problem we have now, is that we cannot go back into the bios at all.
  As machine starts support us on the "F2" key as before, but unlike previously the screen remains white and the "Toshiba leading Innovation > ' screen no longer appears."

  If we keep our finger on the F' key or continue pressing the laptop restarts just without ever get to the BIOS screen where I guess that get us ask the supervisor password that we set earlier?

  Is there another key, that we should be pressing that start the laptop?

  I would add that we have added a password of supervisor for the screen of security BIOS on three of our laptops and all three have the same problem.

  Thank you

  Steve

  I think this should be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

  In some cases, you need to press the "INS" in Toshiba logo appears.

  Then appears a prompt for the password for the supervisor and if the password is certified then the BIOS could be entered by pressing the "F2" key