Re: Tecra M5 wakes up after hibernation without good reason

Similar Questions

• ultra computer window 7 not sometimes wake up after hibernation

  I am running windows 7 ultra on computer dell xps QuadCore 8300 and recently my computer sometimes wake up after hibernation when I move the mouse so I have to shut down the computer using the power button can you help me.

  Go to your control panel and go to your Power Options. No matter what plan you have selected, click on "Change plan settings", then click "change advanced settings of power."

  This should open a list of options, now click on the button '+' option of sleep and
  change the "Allow hybrid sleep" to "Off".

  Just a note, you can avoid only the computer from sleep mode hybrid, means the hard disk activity will remain intact. So the next time your windows is asleep, you can always get on easily by just moving the mouse or pressing a keyboard button.

  Please see the link below. And I believe that it is a desktop computer?

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• Qosmio G20 wakes up after hibernation for no apparent reason

  Hello all,.

  For a while now, I've noticed that my Qosmio G20 tends to wake up from hibernation at random times for no reason apparent. When I place it in hibernation during the night, it passes in a State of hibernation, but (normally) after a few hours suddenly waking up from that State for no reason.

  Obviously this isn't a big issue, but I prefer to Hibernate when it's possible (as opposed to the day before) and it's pretty boring to woke up at 04:00 by triumphing over the Qosmio music shine (it's still better than windows ' your da!) " : P)

  Any ideas?

  Kinder,.
  Lee.

  Hi Lee

  Please check the BIOS settings. I'm not 100% sure, but on a page on the side right, there must be some sort of wake-up option. Check if this option is enabled.

• Satellite L10-202 begins after hibernation without opening the lid

  Hello

  I have problem with start up after hibernation. When I close the lid computers go into hibernation. It's OK. But when I opened the lid it starts. Sometimes I don't even open the cover. I just take over and it starts.

  It is not critical, but it's very uncomfortable because when it is in hibernation, and I take it and move in a purse or bag it lights. Is it possible to configure something he'll start when I press the power button / stop and not when I open the lid?

  Hello

  As far as I know the Toshiba Power saver is responsible for the hibernation and the day before.
  In this case, I recommend first reinstall the Toshiba Power saver.
  Check it out.

• Z460, Ethernet does not work after wakes up after hibernation

  Hi, I used Ideapad Z460 for nearly 3 months. I have this problem. Ethernet does not work after wakes up to the top of hibernation. I have already updated the bios to the lates version (release date: 14/02/2011) but still this problem. Someone has an idea?

  Thanks for reading!

  try reinstalling power management, the default settings of the bios and also try this:

  Right click on my computer > manage > device management > network cards > select ethernet adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

  Restart your computer and check if it works.

• Satellite A200-27U not wakes up after hibernation when you open the lid

  I just bought a new Satellite A200 27U which goes a lot so far.
  However, I have configured in hibernation mode when I close the lid.

  I can't resume automatically hibernate when I open the lid.
  I have to press the power button.
  Is this normal, should resume automatically?

  If yes how to do it do?

  It is the same with my Satellite P200 and I think it's normal. It is the same on my second laptop preinstalled WXP.
  Putting into service is not automatically and after you open the laptop I have to press power button / stop too.
  But it is not so problematic. What do you think?

  You use Windows XP Home or Vista edition?

• Satellite L40 PSL40E not wakes up after hibernation when the lid is closed

  Hello

  I had a serious problem with my L40 PSL40E:

  If I put at the bottom of the screen I could not restart and had to reinstall Vista! After some updates it was fine for a few months now I've lost my entire hard drive AGAIN!

  Friends told me that this has something to do with the hybernation mode or bios (?) and to download some driver bios?

  But does not work the link to 02/11/2008

  The link to the BIOS should work... I visited the European driver of Toshiba page and the links work without a doubt. Maybe you should try it again.

  Generally, it is not a bad idea to update the BIOS and the operating system to the last State.
  Vista still has many bugs and you should check the from time to time if a patches and hofixes have been released.

  In the next time that the SP1 should be published, and you need to install the final version (if available).

• don't wake up after hibernation at all

  I have a Toshiba satallite running Vista Home and it went into hibernation and will not come out of it. I tried to remove the battery, release the battery died, each key on the keyboard while feeding system, any withdrawal of the laptop and trying to start it. I've been looking for days and tent everything to get it to you wake up with no luck. I have pluged to the top of each type of unit just waking and nothing. All I get is the power button lights up, housing starts of HD to go upward and the sleep icon will light up and the processor fan runs, but nothing else. It's a P305D-S8828.

  Any help would be much appreciated.

  Hi Jeff,

  I think Sandeep is one proposed that there is a problem with your hard drive or the motherboard.
  When you press the power button on your laptop you see anything on the screen? Are you able to get into the bios of your computer?
  You will be able to check to see if the hard drive is still detected by the laptop in bios. If the drive has failed, it probably won't see the upstairs.
  Warning: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• Dell 17r laptop doesn't wake up after hibernation

  As soon as the stop, the screen of the laptop, I need to turn on the computer laptop and off again to make it work.

  Any help would be appreciated.

  The problem was caused by drivers being obsolete.

  Windows Update does not pick up, then you will need to download the new drivers on the dell site.

  I recommend starting with the graphics drivers, but I did 3-4 changes

• My Vaio laptop gets really hot without good reason!

  Hello, my computer has been heating very quickly for no good reason, if I turn on my computer and it sitting idly... for 10-15 minutes my computer would be really hot. He went to the 70-80. even into the 1990s

  I put him on the wood or things that are not soft and hard, but despite this, it is still hot. All this happened when my computer has been returned by the repair shop Vaio due to a problem that had happened, however, I think that the purpose of this is because of the fan... She either is not working properly or is too dusty, or even perhaps the amount of heat... etc... Please I need your help, I can not clean! I'll need your help! I trust in you, my laptop Vaio costed me $ 1,000!

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/38924

• Equium - dead after hibernation, the system recovery does not work

  Hello
  I'm trying to fix the laptop of one of my friends, but so far without success. It's a Toshiba Satellite with Vista.

  She had problems with a black screen after startup in Windows Vista. I found a work around for this problem, but it was a little complicated for her... She doesn't know much about computers. ;)
  So I but it would be a good idea to tell him to always use hibernation. However, when I put the portable standby extended, all seemed fine, shutdown, power off.
  I tried and then turn it back on. Light turns green, cd drive makes noises. Nothing more. Screen remains completely black. No sounds. Keyboard input does not work. No access to the Manager startup or anything else. He left light until I pass him by pressing the button for a few seconds.
  I removed the battery and put back in place, without result.
  Connection to an external monitor shows no results.
  When I put the original CD recovery Toshiba, no results.

  So, basically a cell phone dead. Ah yes, I'm in the Brazil in a small village, away from the stores of tech support or computer. Maybe a problem material, but all was working fine until I used the hibernation.

  Any help or ideas would be very appreciated! ;)
  Daniel

  Hello

  My laptop could not wake up after hibernation too but I managed to wake up again.
  This;
  Disconnect the power adapter and remove the battery.
  Now, you will have to wait a while 1 hour should be sufficient, but you can leave the laptop disconnected for a longer time (all night long)

  After that, you must connect the battery and AC adapter and should try to light the device if it will not help you then you are in trouble
  This would mean that a serious hardware problem causing this problem and I doubt you could remedy without any help from the ASP.

• Windows freeze after hibernation Dell Inspiron 660

  Every day my computer hangs when I wake it after hibernation.  Device Manager indicates that driver graphic card Intel is up-to-date.  Current Windows updates.

  Any suggestions?

  Hi barbara2351,

  You can run hardware diagnostics to check the operation of the equipment.

  • Stop and restart the computer.
  • Immediately when the Dell logo appears, press the F12 key. The list of boot devices.
  • Select Diagnostics and press ENTER.

  If there is no problem found, update THE system BIOS.

  The link is http://dell.to/1cT735B.

  Note: Before updating BIOS please ensure that:
  * No external devices (printers, external hard drives, flash drives) must be connected.
  * All other programs should be closed and saved documents

  Please share the operating system.

  Keep me informed of the results. I'll be happy to help you further.

• Tecra M5 comes out of standby/hibernation without guest mode!

  My Tecra M5 goes into sleep/hibernation mode without problem, but after a few minutes will start up again without prompting. Ive tried to change the power settings but have failed. Someone knows something about this problem? -mgh2k

  Did you check Wake up on LAN option in the BIOS? This option is disabled?

• Tecra S1: OS cannot recognize the CD Rom after hibernation or standby

  Hello world
  I have a problem with my laptop Tecra S1 and the operating system Windows XP Professional. My laptop can not recognize the CD ROM drive after hibernation modes or in sleep. And when I checked the status of the device, he told me this message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) ». I tried to uninstall the driver and install it again, but it did not help. And if I restart the computer then the problem is solved but y at - it someone knows how to fix this problem without having to restart the laptop?

  Thank you very much

  B. regards
  Wael Devaud

  Hello

  Maybe this article can help you
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;316575

  Good bye

• Equium A110: Cannot use LAN after wake up from hibernation or standby

  Hi guys

  I can't use lan on my tosiba equium A110 after he wakes up from hibernation or standby. Lan icon there is bur that the internet will not work. Please help me.

  Another problem. When I try to cut something I can't paste it if I open a new folder. I need to keep the file open back cut once again and then paste it. I mean that if after the cut, I open any folder it won't paste it.

  Please help me.

  Thank you

  Hello

  Have you tried to update the connection? Something similar happens on my laptop, but not with LAN but with WLan. If you right click on the little icon of lan, you will see the option to repair. Check it out.

  Also found this possibility. I put t know if it will help but try it.
  1. go to [start]-> [Control Panel]-> select [System]
  2. the system properties dialogue box select [Hardware] tab-> click [Device Manager]
  3. in the Device Manager dialog box, select [network adapters]-> double-click [Intel (r) PRO/100 VE Network Connection]
  4. go in the [Advanced] tab-> property [Wake on settings] select-> Select [Wake on Magic & realized]
  5. Press [OK] to close the dialog box.