Re: Unable to run P0056v200.exe (BIOS update) on Tecra S5 with Vista Ultimate

Similar Questions

• Problem running 4,80 Bios Update on the Satellite P100-473

  Hello
  I have a satellite P100-473 enriched with 4 GB of ram, using ubuntu 10.04 lucid 64 with nvidia driver.

  Problem with often increase GPU to high temperature (over 100 ° C) using sensors applet to check.

  I guess that's a BIOS and a driver problem.

  Windows 7 x 64 I don't have this problem with the latest nvidia driver (using speedfan to check the temperature)

  I tried to Flash the bios with the latest version => _Update.exe BD1_BIOS (V4.80) version 4.0, I actually and all flashing same mistake you Error - 121. update of DXE etc...

  While the .exe to extract the contents of the flash on your c:\tmp I'll try a bios flash with a bootable usb key and phlash.exe with the BD13C43. WPH.

  The problem is to find the phlash.exe official back... Phoenix does not provide such tools ;(

  I understand the need of simple bios flash on windows... but I don't understand the .iso missing for flashing at the start when the operating system does not match...

  If you have an idea thanks ;)

  Toshiba has offered traditional old BIOS updated (diskette), a long time ago. Now you can find WIN updates only.
  You can try to contact the closest service Toshiba and ask if they have traditional BIOS update.

• Unable to run Lightroom_4_LS11_win_4_4.exe

  I can't launch Lightroom_4_LS11_win_4_4.exe or Lightroom_4_LS11_win_4_4_1.exe on my Windows Vista Ultimate 32 bit, service Pack2 update. Nothing happened when I run exe files. No error, no warning. I downloaded several times and they were 787 MB.

  My latest version of Lightroom is: 4.3 [865747].

  Any suggestions? Thank you.

  Problem has been solved!

  I can't run the binary Lightroom_4_LS11_win_4_4_1.exe at all on my hard drive, which is the format NTFS.

  The simple solution is to copy Lightroom_4_LS11_win_4_4_1.exe on my WD Passport external hard disk which is FAT32 and double click on it from there and extraction / installation is complete and Lightroom 4.4.1 works well.

  I thank Adobe, really 'strong' programming mode.

• Pavilion 500-046: fan runs loudly after BIOS update

  So I downloaded the BIOS and sends an update notifications HP wireless. Consumer Desktoop PC BIOS update HP (family ROM SSID ZAEO). After the restart, the fan on my PC very strong rotates every 30 seconds or so for about 15 seconds then turns off; sometimes even more frequently. It's never happened before. Anyway I can fix this or go back to the old BIOS or something?

  Then I opened my PC and went home with a feather duster and a vacuum. This ended the problem.

  Thanks for your help Dave.

• Unable to run setup.exe for pcAnywhere

  I try to install Symantec pcAnywhere on my laptop, but Vista will not run the setup.exe, and I have a problem with the installer when I double click just not the program. Some game forums suggest workaround the command line to disable the InstallShield, but I was wondering if there is an easier way...

  
  

  I really need to access remotely to a computer at work, and the documentation suggests that all software is compatible. I already looked in the Symantec knowledge base, but it is a bit complicated and unnecessary.

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  You will need to contact Norton Support directly, not just read their questions of Knowledge Base.

  See you soon. Mick Murphy - Microsoft partner

• Update from XP Pro to Vista Ultimate in 2013

  I have a Dell desktop computer perfectly although I bought new in 2009.  I bought under Windows Vista Ultimate Bonus, which means that it's a license for Vista Ultimate, but came with the "downgrade" to XP Pro pre-installed.  Reference Dell shipped a Windows XP and a Vista Ultimate 32-bit SP1 with the PC reinstall drive.

  Now that XP reaches the end of the life cycle, I am considering upgrading to Vista Ultimate, so I can get a few years out of this machine.  Is this a good idea?  I'll be able to perform an upgrade to XP using the disc to reinstall Vista from Dell?  Are there pitfalls that I should be aware?

  Well, I took the lead with this update and I have to tell you, this has been the process much more time that I never crossed on a computer.  I went through a lot, too, including recently updated 5 computers to Windows 8.1 (which is from Windows 7 to 8 8 to 8.1 8.1 overview overview).

  Anyway, for those who may have the same idea I had, my biggest hurdle was enter about 20 minutes in the upgrade and running the "Windows could not update the configuration to start the computer.  Not proceed with the installation. ' After several attempts and a lot of research in these discussions, I fell on my stationary.  I needed to start the computer from the disk, and then click the Windows repair option below.  A start-up error has been detected, and I chose the hotfix and restart.  Finally, I was able to restart the process of upgrading XP successfully.

  A few hours later I always install hundreds of Windows, including Service Pack 2 updates, but everything seems to work.

• Want to update card mother/CPU to Vista Ultimate Installation

  I run a retail Installation of Vista 32.  Can I do the following to get my (other than the drivers/HAL) installation to work with new material as follows?

  1 insert my Vista 32 then produces DVD for Windows on my current hardware

  2. choose the upgrade option.

  3. when restarting the computer turn it off.

  4. put in the new material and current readers, turn on the computer

  5. let the 'upgrade' installation continues.

  6. Add all updates since I first installed Vista.

  Note: My install DVD has already integrated SP1.

  Thank you much for the help on this issue.

  When you change the motherboards you should be able to do a clean install to load the required drivers.

  See you soon.

  Mick Murphy - Microsoft partner

• Blue screen with Vista Ultimate after update

  I use Windows Vista Ultimate Edition and the update for Windows Vista for x 64-based systems (KB970653) after the download and update to the list of compatibility view Internet Explorer 8 for Windows Vista for x 64-based systems (KB973874) at startup, I get a blue screen.  I then go to restore before the update and the computer works fine.  What do you suggest me?  The KB970653 says it's an important update.

  Hi Mike,.

  Thanks for choosing the Microsoft Answers forums.

  I see that these updates are causing issues in Vista systems.

  Please go through the links below which contains the fix for your e. from follow the steps in the link provided by Kevin Hau - MSFT

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/276904c0-e775-4AC9-92b3-8abf465f8d4d/

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/276904c0-e775-4AC9-92b3-8abf465f8d4d/

  Cumulative update of zone of August 2009 for Microsoft Windows operating systems

  http://support.Microsoft.com/kb/970653

  Hope this helps,

  Kind regards

  Support of yama - Microsoft.

• Update problem with Vista Ultimate SP2

  I tried to install sp2 to Vista Ultimate twice, with the same results, he failed. The whole process took about 6 hours to complete. The second go round, I disabled my Norton 360 anti virus and turned to "silent". SP2 looked like, it had been installed with success, until I restarted the system. The pc then rebooted and was told that the upgrade was not successful and was recovering to its previous state.

  The upgrade works great on my laptop when I run "home premium". The upgrade of the laptop took less than an hour.

  No idea what is causing the problem, or do I just have to live with what I have?

  Hi Clocksnopper,

  Thank you for visiting the Microsoft Answers community forum.

  Clocksnopper, this problem may occur if any program on your computer interfered with the installation of the service pack, or if there is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  For more of this, you can try the steps present in the following article below:

  http://support.Microsoft.com/kb/947366

  Please let us know the results.

  Thank you.

• Satellite A110 (PSAB0) running hot after BIOS update

  I've updated the BIOS on my Satellite A110 (PSAB0) to the latest version and now the laptop works warm - fan runs continuously and the battery runs out of full of emptiness in a few minutes.

  Y at - it a setting or an other update to address this problem or how to restore the old BIOS?
  I'm sure that I opted to save the old version during the update, but I can't find it on my laptop.

  Thanks for any help

  Have you tried to reset the BIOS to its default settings?

  Also try to update the Toshiba Power Saver and common Modules and make sure the power options are on dynamic processor to avoid the CPU to run at full speed all the time.

• Equium A200-1VO does not run stable after BIOS update

  Hello

  I have a PSAF5E-002005KS A200-1V0. I updated my bios to help what he '20080212105826.zip' file and it doesn't seem to be as stable as it was before.
  It get error messages different copy, msdos errors etc.

  Can I return the bios to the original one and where can I find this please?

  Brian

  Unfortunately, the first version of the BIOS can be installed by a technician of the ASP.

  But I wonder about the error messages that appear after the update of the BIOS.
  Have you tried to reinstall the OS from the recovery CD? You must test the laptop with the factory settings!

  By the way; access the BIOS and set the defaults. And don t forget to save changes ;)

• HP Pavilion dv4-1120br: doubts about the BIOS update for my model with the operating system current instaled.

  Hello

  I have a HP Pavilion dv4-1120br, I know that this model of HP laptop is old, but I instaled the 64 bit of Windows 10 on my machine and saw that my BIOS is version F.30 and the last of them available on the site of HP F.66 has.

  The problem is that this model is not suport for Windows 10 because, as I said, is too old. Can I download and run the update of the BIOS for Windows 7 64-bit available in the Web site, or I need to downgrade my OS to Windows 7, update the BIOS and then pass it back to Windows 10?

  Thanks for the help!

  Cantarino

  Hello;
  
  Let me welcome you on the HP forums!
  
  Your second proposal is correct - as the updates to the BIOS on the HP site are specific to the OS version and if you try to run one for Win7 in Win10, it will refuse to run.

  Good luck

• My Toshiba Satellite player was working fine before an update to Vista. Vista does not recognize the drive. The disc is in the BIOS, but will not load with Vista

  Everything worked fine before an update to Vista, Vista now not regognizing my CD-Rom drive.  There is in the BIOS

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• I'm unable to save all the files on my pc which runs with Vista Ultimate operating system

  I'm unable to save all the files in any application. The dialog box type of flickers in the background, but nothing happens.
  Happens if I am recording a chart on the web using a web browser. Happens when I create a file in Excel or Word, Paint, and Serif (possibly other applications which I am not using at the moment) and then click on "Save as."

  It happens if I opened a pdf file from any source (be it on my drive hard or on the web) and click on "Save as" to save another copy.

  It happens when I'm using a web-based e-mail service, and if I want to add an attachment, as soon as I click on the Upload button, nothing happens.

  It happens when I try to export a scanned image of my scanner, to a file.

  I get no error with the exception of this shimmering when one would expect to see a dialog box.

  But, it happens when I create a new file in Notepad, which is a weird exception

  It started to arrive 3 days ago, and I have not loaded any new software changed the settings I can think. (with the exception of mcAfee who has downloaded an update almost everyday)

  I restarted my computer several times since and searched the net to find answers, but it seems I'm the only one afflicted.

  I would appreciate if someone can shed some light on this.

  Thank you

  I ran scandisk and check sfc, but that did not help. Instead of trying a system restore, I tried the opposite: installed at every possible update available.
  Result: Problem solved!

  I installed 14 updates:
  KB974306
  KB976325
  KB905866
  KB943729
  KB960362
  KB969058
  KB971512
  KB971514
  KB972036
  KB975364
  KB976470
  KB933713
  KB971513
  and Windows Internet Explorer 8

• need bios update hp pivilion dv6500 windows 7 ultimate

  recently updated since vista ulitmate to 7 ultimate need updating of the bios and other utilities software

  Hello

  Since it's a CTO machine, copy the following link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&TaskID=135&prodSeriesId=3369402&prodTypeId=321957

  Kind regards.