Read both sensor and accelerometer

Similar Questions

• Series read several sensors (Encoder + accelerometer)

  Hello

  Im working on this project where demand encoder interface and accelerometer to the marker. I tried to read the serial data and use it to establish a curve (real time).

  

  Problem;

  1. whenever I run it will be always pop out error

  2. There is delay in labview signal when I try to read through real-time graph.

  

  Thank you

  Effendywoo

  
  

• My BDDVDRW drive will recognize is no longer read the audio CD, but both DVD and BD

  I have a HP pavilion dv6 under Windows Home Premium with a HP BDDVDRW CT40N. I have never had any problems with the optical drive. About 2 weeks ago, I started ripping of audio CD on my hard drive using Windows Media Player. I pulled about 15 CD over the 2 weeks. Then all of a sudden the drive read audio CD - I put a CD in and nothing, even after hours. If I click on the player it ejects and answers please drive inset.

  So I thought it was the CD and inserted other CD, even the ones I had just ripped - nothing. But it reads the DVD fine; I just saved a DVD with it.

  The machine is about 5 years old, but it works well, so I thought maybe it was the reader. I have another computer; It only a little more than a year, with a HL-DT-ST BDDVDRW CT40N and running Windows 10. I started to rip from CD with this computer also with Windows Media Player. Guess what - same thing.  I was able to extract only 3 CD before he showed the same symptoms: can't see CD; no problem with DVD.

  Finally, I went to my wife's computer, a different HP running Windows 7 with a DVD - RW disc. This time, think of some sort of virus or malware may be responsible, I made sure that there was no Internet (not ethernet WiFi or Bluetooth). I ripped a CD and then the same thing.

  All three computers has failed using different CD - it wasn't the same CD that was torn apart last before failure.

  I doubt very much that three different computers with different symptoms of operation and different readers might undergo the same material unusual problem in few days after execution of the software even on different CDs. There must be something about the use of this extraction software (Windows media player) or disk characteristics of driver that blocks the CD (apparently after extraction).

  I'm only moderately tech savvy, but successfully, sometimes after a considerable effort, more than anything I tried. I have had no success with this (towards even a problems prior restore point) and am at a total loss.

  Help, please.

  While they inspected, CD is not detected by the computer. You can do the following steps the solved the problem.

  1. Scan of the SFC
  • Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
  sfc/scannow

  2. run the disk check in Windows 7

  • Open the Start Menu and click on the button of the computer on the dark right side.
  • Right-click the hard disk you want to check, and then click Properties.

  3. click on the Tools tab and click the check now under error checking.

  4. you will now see this window. Follow the steps below for what you want to do.

  5. to only scan the disk for errors

  Note: This will give you just a report if there are drive errors or not and will not attempt to correct.

  • Let off both boxes, and then click the Start button. (see screenshot below step 4)

  6. only scan and try bad sectors recovery

  Note: this analysis tries to find and repair errors on the hard drive itself, physical and it may take much longer to complete.

  • Uncheck the automatically fix file system errors . (see screenshot below step 4)
  • Select the search for and attempt recovery of bad sectors .

  7. only scan and trying to automatically fix errors

  Note: This will automatically attempt to repair problems with the files and folders that the scan detects.

  • Check the automatically fix file system errors . (see screenshot below step 4)
  • Uncheck the search for and attempt recovery of bad sectors .

  8. to analyze automatically try to fix the errors and bad sectors recovery

  Note: This will scan for file errors and physical errors (steps 6 and 7). It will attempt to repair problems with the files and folders and retrieve physical errors.

  • Check the automatically fix file system errors . (see screenshot below step 4)
  • Select the search for and attempt recovery of bad sectors .

  9. Click on the Start button and is not 10 or 11 below depending on the whether the drive is currently in use or not. (see screenshot below step 4)

  10 if the selected hard drive is not in use, you will then see to check the startup disc check the disc now.

  • When the analysis is complete, you will then see
  
  results. Click close.
• Click OK. (see screenshot below step 3)
• Stop, you're done.

11. If the selected hard drive is in use, then click on the schedule the disk check button. (see screenshot below)

Note: If the hard disk that you selected in step 2 is in use (for example, the C: drive or the partition that contains Windows 7), you will be prompted to reschedule the disk check for the next time you restart your computer.

• Restart the computer.
• At startup, you have only 10 seconds to press any key to cancel the check disk of measures 7 or 8. (see screenshot below)





• Once the scan is complete you will see a report similar to this below briefly until the computer restarts automatically.



If the problem persists, you can run repair for Windows 7.

Brand of kindly as answer if that answers your query. Let us know how it goes.

Thank you.

• I would like to create an interactive pdf in Indesign - two guest on 1 page in Indesign that when exporting to adobe reader in pdf format, I can simply add new names that populate both copies and then be printable. Any help out there is how to make an ext

  Two invites on 1 page in Indesign that when exporting to adobe reader in pdf format, I can simply add new names that populate both copies and then be printable. Any help out there is how to make an invitation in Indesign, but now how to make 2 copies on a single page that someone else ie the customer can add their own names. So each field name must complete on both guest. Sounds simple, but is not really there to help. I think he called an interactive pdf. Thanks in advance.

  AutoFill is the easiest part, he lies. If both fields have the same name, they will have the same content: type in one and it appears in the other.

• P3015 - can you print header on both duplex and duplex not?

  OK, so I read the posts on bugs with the firmware and printing backwards. I am convinced that this is not the problem that we have.

  We have a P3015DN. Try 2 we have letterhead.

  Staff sometimes want to print duplex on letterhead sometimes single-sided.

  I know this sounds simple butI don't think that this is possible.

  An example: Document1 has two pages, the word on the first page and on the second secondpage firstpage.

  If I load the paper as indicated for letterhead (2 tray settings are A4 and every type) have one side it prints two pages correctly the way straight to the top.

  If I change the settings to print both sides and print the document it prints the page one to the back of the paper to header (and backwards) and two page at the front of the book and upside.

  Is this correct behavior?

  Is there a way to get around this? I tried rotation (which brings them the correct way to the top), but it still prints pages and then two in the front and one at the rear. (although I also change the parameter from the front to the back on the back of a plan)

  Probably HP cannot have highlighted a printer allowing printing two-sided all or nothing?

  Any help is appreciated, we have 10 of them that will come back in a week if not.

  According to the manual of LaserJet P3010 series user's Guide (http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01612470/c01612470.pdf - see page 105) you should be able to set the Alternative letterhead mode in the driver:

  Load letterhead or paper pre-printed the same way for each employment, to printing on one or both sides of the page: 

  one) Open the Options section of the Document, and then open of the printer features section.

  b) in the Alternative headerdrop down menu Mode, select on.

  c) in the product, the paper in the same way that you would for printing on both sides.

• When I try to import multimedia an error reads "in QuickTime and or the appropriate codec does not appear to be installed."

  When I try to import multimedia an error reads "in QuickTime and or the appropriate codec does not appear to be installed."

  [moved based on duplicated... messages which I deleted... MOD]

  You try to make a DVD or Blu - ray (or both)?

  This absurd error with 2 exports that you describe. If Yes, provide the screenshot of mediainfo John queries.

• Adobe Reader DC/2015 and SCUP

  We seek to use SCUP/SCCM to get Adobe Reader DC.  We used successfully the transition of v9 to v10 and then the v10 to v11 previously.

  SCCM-SCUP - Guide to Business Administration , says "DC products, catalogues of transition and updated in a single file" - but when the catalogs are installed (both classical and continuous) only updates seem to be present.

  Just in case I did a test and deployment of the machine, that I targeted who has 11 Reader installed with SCCM shows that it is in line with no installation CD.

  Am I missing something obvious or are the files of missing transition of the catalog?

  There is no catalogue of transition from 11.x to DC.

• Does Verizon iPhone 6s more support both GSM and CDMA network?

  Agents I knew, I had confused information about what my 6s of Verizon Plus iPhone supports. Only one person in the store said that it supports as well the networks outside the United States, but no other network except Verizon in the USA. Another person said that it supports only the USA and outside CDMA network. Once I get it unlocked, it supports both GSM and CDMA outside Verizon networks in the United States and in other countries? It's the truth? Thank you very much!

  Yes. It supports both GSM and CDMA, however, many carriers non-CDMA using us what they call a "CDMA SIM". It will not work on these networks.

• Impossible to use both: iMusic and previous music library

  Hello

  to use iMusic on my iphone and ipad, I have to activate the iCloud music library; but when I do that, all my old files, in this case, various language courses, disappear or cannot be played more.

  I chose "merge" btw.

  Anyone know how I can use both? And also, why the * Apple does it?

  Hello builtthispool,

  Welcome to Apple Support communities with your question about music and language courses.  I use Apple music and I also have a lot of audio files that are usually not in the iTunes store.  I am happy to answer your questions.

  First I wanted to give you this link that will explain a little about the differences between music from Apple and iTunes game:

  iCloud library: understand the differences between music from Apple and iTunes game

  Especially take note of this article:

  Music to Apple and iTunes game are not backup of your original music library services. Be sure to back up your music library so that you have a copy of your music and other information if your Mac or PC is already replaced, lost or damaged.

  Before you begin working with the help of Apple's music or iTunes Match, whichever you choose, you'll want to save your language course.  Here is a link to explain how to back up your iTunes library:

  Manage and backup your iTunes library

  Once you have saved your iTunes library, you can decide which service you want to use.  While both services download songs that are not in the iTunes Store, it is possible that they may not download or correspond to classes because of the type of file.  What you can do instead is to synchronize files physically connecting your iPhone / iPad to your computer.

  Media synchronization between your iPhone, iPad or iPod touch and iTunes on your Mac or PC

  Have a great day!

• Apps should now be updated on both iPhone and iTunes

  Before the latest iTunes update, if an application has been updated on the phone or on iTunes, it would update each other through sync.

  Now, an application must be updated in BOTH iPhone and iTunes. I used to always update the app on the iPhone and then sync, cancelling the need to update in iTunes.

  Why do we know must update the application twice instead of once made previously? He could do a little faster sync without having to download on iTunes, but that savings is probably lost when need to also download in iTunes.

  I synchronize at least once a day.

  You see the thinning introduced with iOS App 9. When you download an app from the App Store directly on the device, it downloads a specific application for that device and download only the features that work on this device. This is done to save space on the device. Apps for transfer is no longer the device to iTunes, so they must always be updated in iTunes as well as on the device.

  You can find more about this with your own research, but here are a few articles, you can watch.

  http://www.IMore.com/app-thinning-iOS-9-explained

  http://arstechnica.com/Apple/2015/06/app-thinning-will-be-a-major-boon-for-8gb-a nd - 16 gb-iPhone-iPad.

• I and issue with the version of 29.01, seems I have installed two, a Favorites appears, the other not. I can both uninstall and reinstall with bookmark?

  Somehow, it seems that I have two versions of 29.01installed. One is the American version and the other British version. One that has all my favorites and viewable history, but there is no visible address/firefox browser toolbar. The other version has none of the bookmarks, and using the profile search product not available, but this version has no visible address/firefox browser toolbar.
  Can I uninstall both versions and then download and reinstall a new version and at the same time find all my favorites and the browser history?

  Make sure that you do not delete personal data when you uninstall Firefox because that will remove all Firefox profile folders.

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/KB/backing+up+your+information
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission get full and unrestricted, access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when the iPhone is connected?

  How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when plugged in? I recently upgraded my PC. I have restored my backup of iTunes on the new computer and it works fine. The iPhone, however, is waiting to synchronize wirelessly to the PC that I no longer use, and iTunes does not recognize my iPhone when I plug.

  I came across this problem recently and had to talk to Apple

  If you mean the computer name listed in the settings - iTunes WiFi - Sync

  Then, it's exactly what I'm talking about

  I had to not reset my - no joke - general - reset - Reset all settings - no content has been damaged and there is NO need for a restore

  Lost among others

  All my WiFi passwords

  All of my alarms

  All my preferences of location services

  BUT he did remove the old name of the computer from there

• I've just updated and I lost my reading later work and all the articles I've been saving. That's happened?

  I've just updated and I lost my reading later work and all the articles I've been saving. That's happened? I'm very unhappy about it. Help, please.

  Said its compatibility with the 4.0.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/read-it-later/

• I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up ever since I downlo

  I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up, since I downloaded the new version of Firefox. I want just the old version of this back because I can't download the Adobe stuff which is necessary to protect my computer against hackers apparently not. It would have been nice to know he had a problem with the new update of Firefox BEFORE I downloaded it. I have Vista, which is usually a problem with Adobe and Firefox. I don't seem to be able to run a lot of Adobe at all on my computer because of the Vista.

  This has happened

  Each time Firefox opened

  http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox

• Is it possible with the serial number of an Xserve to read the configuration and the year of production?

  Is it possible with the serial number of an Xserve to read the configuration and the year of production?

  This will show you the model and year: https://checkcoverage.apple.com/

  If a specific configuration (like the 1 TB disk instead of 500 GB for ex) will not be determined. You can only learn by starting the Xserve (or open and look into it.)