Read error-getdatatype TDMS

Similar Questions

• Read error - SOLUTION system configuration data

  Today, I found a solution to the error of notorious boot not only on the toshiba, but some other brands also.

  The error is: System configuration data read error.
  He invites to start with 2 beeps which prevents the computer laptop Moldavian from.

  I tried everything I could to remve this message but noything helped me.
  Replace all, cmos battery, updated the bios, loader, drives, keyboard and etc.

  Today, I found a solution very simple that I want to share with you guys.
  This solution worked for me and I hope it will work for you too.

  Are you ready? :)

  Go to the Bios and change the Bios language french.

  Post here if it works for you also.

  Thanks for sharing your experience with us. But its really hard to believe that your solution would be linked to all devices such problem

  However, good to know that this small change in the BIOS has helped you to resolve the issue

• Satellite A300D-135 - BIOS - System Configuration data read error

  After starting a Satellite A300D-135 laptop computer, the following error message appears:

  
  3070M extended RAM passed
  512 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
  Fixed disk 0: TOSHIBA MK2546GSX
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  After pressing F1 the machine starts Windows, very well, but the error message is quite irritating, while it comes with a loud BEEP

  I tried the following things so far (in that particular order):
  -Load BIOS default
  -Flashed the BIOS with the latest version of the BIOS (2.80) for this type of model
  -Reinstalled windows with HARD drive format

  All the these did not work.

  I saw the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but so far I have not been able to find a working solution.

  It might me a hardware problem, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work perfectly under Windows, so this does not seem the question). Another solution that is mentioned in some forums, replace the battery. But because the phone keeps time correctly I don't think it's the case either.

  Any ideas?

  Kind regards
  GJ

  Hello

  The POST (power on self-test) BIOS checks and detects errors on the motherboard.
  I think it has something to do with the hardware on the motherboard problem.
  I doubt that you can solve this if update of the BIOS and the BIOS default settings didn't change that.

  What to say; I think that the technician of the ASP should run tests to check what's wrong or what cause this I think it is question of s mobo.

• Equium A300D - 13 X - Configration system data read error

  Hello

  I have a problem with my Equium A300D - 13 X laptop, everytime I turn on my laptop it starts and loads the initial startup screen as usual, Toshiba once asked that loud "BEEP" comes from my laptop, and lists the following information:

  Phoenix TrustredCore (tm) NB
  Copyright 1985-2006 Phoenix Technologies Ltd.
  All rights reserved

  Herring of the ITA (DDR2 + T/RS690M/SB600)
  CPU speed = 2000 MHz

  639K system spent RAM
  1918M extended RAM passed
  1024 KB of L2 Cache
  Occult system BIOS
  Video BIOS with a shadow
  ATAPI CD-ROM: MAST * ADVD-RAM UJ-850 S
  Fixed disk 0: WDC W2500BEVT-00SCSTO
  Fixed disk 1: Hitachi HTS542520K9SA00
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  I replaced the hard drive and flashed the BIOS settings as advised by Toshiba Helpline but the problem persists.

  Help, please! because the "BEEP" is now getting on my nerves!

  See you soon

  Hi andrew_net82,

  It seems that the BIOS has detected an error with a certain part of material...

  Before doing something I recommend you load the default settings in the BIOS. If you are in the BIOS Setup, press the F9 key.

  If it doesn t work you need for professional assistance from an authorized service I think. Guys need to check which part of the material is defective and must be replaced.
  List of the ASP, you can find on the official website of Toshiba.

• Satellite P10-304 Disk Read Error

  Hi people...

  I am trying to upgrade my computer portable HARD drive. I use an external enclosure and cloning software to clone the Toshiba HDD to a WD Scorpio drive more.

  The clone worked as far as I can tell and I can actually it boot via USB of the outer shell, but when I install in the mobile I have a disc read error. The speaker came with another Hitachi drive I tried the same result. I tried using the recovery disk of the product with the new drive but it wouldn't boot either, I tried the CD with the old drive so I know it works.

  Any suggestions as to what could go wrong for me here?

  Thank you!

  Will be the new HARD disk that is recognized by the BIOS?

  How much disk space a new HARD drive? Maybe the new HARD drive is great for this laptop and it could be interesting also how much disk space has the old HDD.

  In addition, I would like to make a BIOS update.
  What you can find on the European site of Toshiba.

• Equium A200-1VO - "a disk read error has occurred."

  Hello

  I had my Equium A200-1VO since December 2007 and has never really had any problems with it atall.

  However, last night after a Windows Vista update and restart, my laptop won't start upward. I get a black screen announcing:

  "A disk read error has occurred.

  Please press Ctrl + Alt + Delete to restart»

  I've had no BSOD, and no other suggestion that something was wrong, everything worked perfectly. I checked the HARD drive to see if it had come off his link and reinserted it. But I get the same message.

  I am presented with the only possibility to use the recovery disk, but this means wiping everything out there and start again. I'd rather try to recover my documents before taking radical measures, if it is possible atall.

  If anyone has any suggestions I would be very appreciate.

  Thank you very much

  Mark

  Equium A200-1VO
  -Numtxpackets® Pentiuma® Dual - Core Processor T2310 - genuine Windows® Vista® Home Premium Edition - DVD Super Multi (Double Layer) in car-2 048 (1 024 + 1 024) MB of RAM (667 MHz) - 15.4 "WXGA TFT screen 1 280 x 800

  Hello

  In my view, the error message says a lot: theoretically, your HARD drive may be defective and must be replaced but before that I would test using fitness to drive or another program. Just use Google to find such programs.

  Maybe something was tangled up in your Windows installation. About reinstalling Windows?

  You didn't back up your data to a second drive? I m wondering about this, because the backup should always be made.
  However, if you use an external HARD drive box you can save it on another computer.

  Good luck! :)

• Satellite Pro 4600: disk-read error occurs - press Ctrl Alt Del to restart

  I have a Pro 4600 which displays the error message "a disk read error has occurred. Press Ctrl Alt Del to restart "as soon as TOSHIBA logo goes.

  The laptop was given to me because the person who had tried to move to XP Pro and don't could not make it work, error with the CD Rom drive and she deleated the old OS (Win2000) off the coast.

  I took the hard drive and did a fresh install of XP by attaching the drive to another computer. The hard disk starts well on the other computer, but I get the error message on the Pro 4600.
  Any ideas. I know that I need to replace the CD Rom, but if I can't make it work, I don't want to drop money in it for a new CD Rom

  Thank you, Bob

  Hello

  Are you sure that the CD drive is dead?
  I have goggled a bit on the net and found some practical information that there may be some HDD malfunction.
  Some guys advised to use the command CHKDSK C: /R to solve this problem.

  But if it's a cd player error, it should be possible to disable the drive in Device Manager.

• Satellite M40 does not start from hard disk - read error

  "I push the button - briefly see the In Touch with tomorrow TOSHIBA screen - then ' + a disk read error occurred press Ctrl Alt Del to restart +".

  I control alt delete brings me briefly on the screen TOSHIBA where I can choose either F2 or F12.

  Do I need a startup disk and where can I get one in order to boot from the CD ROM?
  Do I try to get into the Satellite M40 product Recovery DVD-ROM - this concern for me as the hard drive will be reformatted and all data will be lost.

  I'm stuck please help!

  Hello!

  If you enter the product recovery disc, Windows will be relocated and will be erasing all data on the HARD drive.

  I think that your HARD drive is damaged. You can check this with the Drive Fitness Test. Here you can download:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  By the way: you can save the data on the HARD drive, when you put it in a box external HARD disk. Then you can save the data on another PC, if the HARD drive is ok and have no errors.

  Good bye

• Satellite L305D-S593 - disk read error

  My Toshiba Satellite L305D-S593 suddenly stopped. At first I thought he had a little more heated or something, but when I tried to turn back on it gave me a message saying disk-read error press ctrl alt del to restart. I did several times in the same direction. While I tried to reinstall windows, I got lucky if she showed to the installation screen once it did, I followed the instructions for installation clean (I had to do it once before, but for different reasons).

  Once he brought me to the menu had to select a partition to install on I said to do it on the main HDD after some loading and that time, he said that it was impossible to complete the formatting required. So I Redid the process and I noticed the music said it had 288 GB of available memory, but before that, I had only about 40. To remedy this, I clicked on the format button and it says that it cannot complete the action because the disk is about to fail.

  PS My processor is 64-bit AMD Turion dual core mobile, with 4 GB of RAM

  Hey,.

  In my opinion, it has something to do with the HARD drive itself, I guess that it s a bad sector so Windows Setup can format t HARD drive properly. I mean before you tried to reinstall Windows, the system could not start due to a disc read error. This means that the files on the HARD disk are confused because of bad sectors

  You can install Windows Toshiba Recovery disk?

  If it doesn t work too, I'll try to replace the HARD drive. Usually, it is not complicated and can be done in 5 minutes.
  In addition, you can check the HARD disk for errors with diagnostic tools special as Drive Fitness Test. Google a bit for such tools, they are freeware, so it s no problem to find. ;)

• Error 6 TDMS Open to PDM

  Hello

  I have an application that uses the TDMS VI to generate a log file.

  The application ran successfully for 12 days. (Each errors and some settings - hourly - has been correctly written in my TDMS file).

  Then, the following error has occurred:

  Error 6 TDMS Open to TDMS - write data Subvi V1.5.vi MULTIMETER D2XX V1.2.vi->

  Possible reasons:

  LabVIEW: File generic i/o error.

  =========================

  NOR-488: IO abandoned operation.

  I join my VI who manage the TDMS files.

  The error seems to come from the "OPEN TDMS" VI. The corresponding TDMS file is actually at the location specified, and its content is OK (all the news expected are present). The file is called LogFile_0_1.TDMS.

  Depending on the size of PDM, the application automatically creates a new file. I tried to force to get a new PDM from the file (assuming that the current file has been altered or blocked). A new TDMS file was created (LogFile_0_2.TDMS), but only the first tab (root) was created. Then, the same 'error 6' was still there, exactly as before.

  Don't you think that this problem can come from Windows?

  Or is it my application? This is not optimal, it is that this "TDMS - write data Subvi V1.2.vi" is called on every second and the function "OPEN TDMS" is called unconditionally (even if no changes on the TDMS file are required).

  How to explain that this bug appears after about 12 days only?

  I'll also the LogFile_0_1.TDMS that I have converted to Excel and the LogFile_0_2.TDMS file that was not created correctly.

  Thanks in advance for your support.

  Michael

  My guess is that you forgot to close the PDM file and whenever your VI is called a reference is created.

  It could be that after a week has reached the maximum possible number of references, and you got the error.

  Kind regards

  Marco

• 0xc00000e9 then a disk read error occurred. Press CTRL ALT DEL to restart

  desktop computer is Compaq windows update.  on restart received status 0xc00000e9 32\ntkrnlpa.exe leader: \windows\ system information: windows failed to load because the kernel is missing or corrupted.  Installed recovery disk, now have "a disk read error has occurred. Press CTRL ALT DEL to restart".stuck cycle.    suggestions?

  shonkg,

  HD can be at fault... do a chkdsk and make sure that your player or files are not damaged.

  http://www.w7forums.com/use-chkdsk-check-disk-t448.html

• disk-read error press ctrl alt del

  I start to load Windows XP Pro and I get an error MSG before it comes to the first Windows XP logo, it reads the disk read error press ctrl, alt, del start I have checked all my connections and cables. I can add another hard drive and use bad like a slave and it starts up fine, and I went to the slave and looked everything I could think of, go back, it just above starts with the same error.

  Hello

  I suggest you get into the Recovery Console and use the where command prompt to run the chkdsk command. This scan the hard drive for bad sectors and recover any information from reading. To get instructions on how to enter the recovery console in Windows XP:
  How to install and use the Recovery Console in Windows XP 
  The KB above also shows how to use the Recovery Console prompt.
  a. Insert the Windows XP startup disk in the floppy drive, or insert the Windows XP CD into the CD drive and restart the computer.
  b. Click to select all the options required to start the computer from the reader, if you are prompted.
  c. when the "Welcome" screen appears, press R to start the Recovery Console.
  d. If you have a computer dual-boot or multiboot, select the installation that you must Access from the Recovery Console.
  e. When you are prompted, type the administrator password. If the administrator password is blank, just press ENTER.
  f. type in the following command and press ENTER:
  Chkdsk /r
  g. once the command is executed type "exit" (without the quotes) to exit the command prompt and check if the problem is resolved.
   
  See also:
  http://support.Microsoft.com/kb/315265
  Note:
  
  Warning of Chkdsk.
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• What happens when you get this message a disk read error occurred press CTRL, alt, delete

  I have a blue screen, which has this message "read a disk error occurred press control, alt, delete to restart, and when I do go to the first page of windows then return to the error.

  This should help you: http://www.tomshardware.com/forum/250364-32-solution-disk-read-error-occurred

• Boot disk hard read error and other critical and dangerous errors. .

  After logging in, a "File Recovery" window opens and lists a number of errors. The desktop is black, and the saved files are missing.

  Here are some of the messages: -.
  Hard drive boot sector read error; Criticism
  System blocks are found; Criticism
  Error 0 x 00000024 - NTFS_FILE_SYSTEM; Dangerous
  0x0000002E - DATA_BUS_ERROR error; dangerous
  etc, etc.
  It also gives the message that it is strongly recommended to fix the errors found all and provides a button to click for repair
  When I click on the button repair it prompts me to buy a license for the full version of the File Recovery software.
  Should I buy a license, or is it a virus or a scam?

  Hello

  It's a scam.

  File recovery is a family of scareware programs Rogue.FakeHDD computer infection. This family of computer infections pretended to be a hard drive diagnostic and repair programs which scans your hard drives for errors and then allows you to correct. In reality, however, this program is a computer virus which displays false information, hijacks your computer and hide your files and Windows Start menu to make you believe that your hard drive has failed. This family of computer infections spread through Trojans that display fake computer error messages. When you click on one of these messages it will then launch file recovery program in the hope that you will buy it

  Follow these steps for removal.

  http://www.bleepingcomputer.com/virus-removal/remove-file-recovery

  See you soon.

• A startup problem after that Windows updates were installed and a disk read error occurred.

  I have a laptop Dell Inspiron 9400

  Windows Vista Home Premium SP2 operating systems

  Last night, he showed 16 updates are ready to be installed the automatic updates.

  So I clicked to install the updates as I always do.  I have everything done exactly the same thing.  When updates

  have been made install prompted me to restart now for the updates to take effect.  I have clickedd the button

  Restart now and he acted like he was going to reboot except is went to a blue screen with a message that says:

  A disk read error has occurred.

  Press Ctrl + Alt + Delete to restart

  I tried several times by pushing the Ctrl + alt + del keys to restart my system, it does not start...

  It shows the DELL screen with the loading bar, which is in charge of the left to the right.  It then displays

  Back to the blue screen with the same Message (an office read error)...

  I tried once or twice as the system restart in Mode safe mode (F8)...   This doesn't work anymore...

  He always flashes back to the BLUE SCREEN with the same message.

  Please, can someone tell me why this would happen as a result of the windows updates...?

  How this can be fixed or what should I do to get my back operational system?

  Thank you...

  Shelly928

  Hi Shelly928,

  You can read the following article and try the steps to solve the problem:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Hope this information is useful.