Reader of CD-ROM/DVD-ROM CODE 10

Similar Questions

• D/DVD-ROM drive cannot read the CD or DVD

  Hello

  I use Windows Vista on my laptop. Its quite some time that I did not use my DVD/CD drive. Today, I try to use but cannot read any CD or DVD. I was trying to solve the problem of updating the drive, but still cannot fix. Can I use Microsoft FIX IT microsoft support but the problem still there.

  Something to say: windows cannot start this hardware device because its configuration (in the registry) information is incomplete or damage (Code 19).

  Click on 'Search the soluton' to send data about this device to Microsoft and to see if there is a solution available.
  I did it but the result is COULD NOT LOAD DRIVER SOFTWARE.

  Please advise what should I do?

  Thank you!

  Hello

  It is very rare for the methods in the 1st answer above does not fix a Code 19.

  You might have a disk problem as the CD/DVD is actually 4 discs in 1 case (CD & DVD and CD burn and)
  DVD playback). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD-ROM drive settings of
  someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Re: Satellite 5200-501 (old) Cd/Dvd-rom is not reading the CD rom/DVD

  Hello

  I have an old laptop of my father (purchased in 2003). I clean the laptop to use it for surfing the Internet.
  Unfortunately, I noticed that the CD DVD rom (with signature of driver of Aplix Corpation) doesnot read the Cd or DVd.

  2 questions.

  1 can someone help me with troubleshooting?
  -J' already checked the Device Manager and the device SCSI DVD Rom SCSI Cd rom works / is enabled;
  -Tried it lot the driver (version 5.1.2535.0 Microsoft), but it does not;
  -He begins to read a Cd/Dvd (blinks) but I still don't see a drive mapping;
  -In the management of the computer the CD-ROM (Dvd - rom) doesnot appear;

  2. has tried to remove the DVD CD Rom of the computer laptop but cannot get 'live', who still holds the DVD CD rom on its place.

  Please let me know what I could do.

  + The message was edited: changed laptop model name +.

  Hello

  I assume that you have installed Win XP on this oldi.
  Win XP and other systems such as Win Vista or Win 7 use the Microsoft CD/DVD driver and a STRANGE special drivers is therefore not necessary.
  The ODD (optical disc) must be recognized by Win XP automatically without installation of any other drivers driver update is not necessary.

  I recommend the removal of the CD/DVD drive in Device Manager, and then remove the upper and lower registry filters.

  Here is a document of useful knowledge Ms.
  http://support.Microsoft.com/kb/314060

• HL-DT-ST DVD - RAM GSA - H55L [CD-ROM drive] cannot detect, read, play CDs or DVDs.

  Running Windows XP Home Edition SP3 (build 2600) with LG HL-DT-ST DVD - RAM GSA-H55L [CD-ROM drive]. Updated all drivers and ran all the diagnostics; still only detect, read, or play CD or DVD.  Installed and run program Microsoft ATS Fix It - has not fixed the problem. CARPET directed me to this site.

  I had the system 4 years and have used the drive to read and burn many CD / DVD, so he's worked in the past.  Thank you very much in advance for any help you can provide.  I appreciate your time and your consideration.  MS

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Method 1.
  To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  Reference:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2.
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CD player does not read the CD ROM and CD music, DVD works fine

  My HL-DT-ST DVDRAM GSA-H42N DVD and CD player does not read the CD ROM and CD music, DVD works fine

  Hi Anil,

  We recommend that you download and run the Microsoft Fix and check if the problem persists.
  See your CD drive or DVD drive is missing or is not recognized by Windows or other programs

  See also: http://support.microsoft.com/kb/321641

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Does anyone know how to unlock region on a CD-ROM DVD player codes?

  Does anyone know how to unlock region on a CD-ROM DVD player codes?  I have this stupid Windows 8 and so far I only have PowerDVD. But I also have windows media player.  I am trying to get Windows Media Player to access the DVD that I used for Windows 7, but whenever I stick one in this computer stupid, by default it starts to Power DVD.

  According to the power dvd faq: "the limit is in accordance with the requirements specified by the major movie studios. PowerDVD allows you to change the codes of the region up to 5 times (also depending on your DVD player) and then automatically record fifth region code setting. Subsequently, you can only play DVD titles in the fifth code region or non - CSS all regions DVD titles. Area code will remain locked even if you reinstall PowerDVD. »

  Is there by chance a legal way around this? I wish I could watch my DVDs on my laptop when I want without locking on my other. I don't do anything illegal as piracy of DVDs, I just want to be able to watch them. Could someone please? Thanks in advance.

  Use another program like VLC player or Potplayer.

  It's by design, not much you can do about it. He was there for Vista/XP

  Otherwise, you will have to Flash a hack of firmware for this DVD region

  Go to default programs and change the format for windows media player

• Whenever I insert a USB in my PC is not autoplay, I do not have available to all group policy, and I can't read or write CD/DVD

  Original title: "Autoplay, group policy and CD/DVD"

  Hello

  I have two questions actually worry,

  First of all, I have Windows Vista Home Premium Service Pack 1 installed on my PC

  My first problem is that whenver I insert a USB in my PC it doesn't autoplay and the option is not available at all even when I get clich the drive itself, I went Microsoft support and installed security update 950582 and still no hope. I also can't find the NoDriveAutoRun or NoDriveTypeAutoRun in the registry because I don't have the key explore in both policies.

  In addition, I have not available to all group policy.

  My second question is that I can't read or write CD/DVD even if I have the driver installed, I tried the DVD Microsoft repair but it shows that the repair failed.

  Thanks in advance and hope to receive a solution soon.

  SAS ING.

  Hi Sas Eng,

  There are a few solutions to the question of automatic playback on the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  And if the solutions provided for the DVD ROM Lorien did not help, as you say, it is probably a hardware fault.

  Try the steps are on the link and let me know if it helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD/CDROM (CODE 39)

  I recently installed windows 7, my dvd/cd drive was working fine and I was able to burn a cd/DVD delivery thereof. Now it does not read the cd or dvd and in Device Manager it comes up with code 39, my model number is a6440a.

  Thank you

  PS - windows update does not pick up anything, and I can't restore the drivers in Device Manager.

  Published by landslide on 06/11/2009 06:52

  Take a look at this article:

  http://support.HP.com/us-en/document/c00817052

  This sometimes happens if a different burning software is installed.

• Tecra A2 - Mat * one reader not reading/burning CD or DVD

  Hi all

  My carpet * a drive does not work on my Toshiba Tecra A2.
  I am using windows XP and the drive is UJ-820 s serial number.
  It does not at all, will not reading/burning CD or DVD

  Any help would be massively appreciated

  See you soon,.
  Jim

  Hello

  It seems its time for a new CD/DVD drive :(
  To me it seems that the laser of the ODD lens does not work as it should eventually it s affected and cannot calibrate because of the stress of the material
  Therefore, in my opinion you a replacement drive are necessary.

  Notes; You may not use any CD/DVD drive. You need a compatible due to different master/slave/c-salt settings.
  In your case, I would like to get in touch with a local ASP and I ask for a compatible player.

• CD/DVD drive reads all formats of DVD and regions

  Hello
  My Teac-dw-224th-a bed not all formats DVD and regions.
  It reads CD but not DVD at all.
  No DVD - R and DVD not yet regular. I checked the DVD region.
  I reinstalled the driver and also tried with different software.
  What can I do?
  Help, please!

  Hello

  It is possible that your DVD drive incorrect region settings.
  In this case, it is not able to watch all possible movies to DVD from different regions.
  Of course, you can change the settings for 4 times. But after this change, the parameters have been set and it is not possible to change more.

• external dvd writer dvd1260i & it does not read any cd or dvd

  Mr President, I bought (1260i) writer, external dvd hp with one year in a store approved hp

  now it does not read the cd or dvd & it's within the warranty period. I want to repair or replace the product.

  Mr President, I also went to E-48/4, OIA E-44/2, OKHLA, BUILDING CARDINAL-JASOLA, GARDEN RAJOURI C-4 but they said that "we ddo does not address of office and its peripherals, we repair only portable and tablets.they send me to the other.

  "i.e. okhla jasola, jasola to rajouri garden & new garden rajouri to okhla.

  but nobody has solved my problem.

  so

  Sir please tell me the address of the appropriate service center & contact no.. in delhi & help me solve the problem

  Rajat salhi

  [Personal information]

  Sorry for the delay. I spoke with people in the service center below. Please visit them with the reader and the proof of purchase.

  Jabil Global Services India Pvt Ltd.

  107-A, first floor, cardinal Aurum

  Jasola District Centre, Jasola

  New Delhi 110025

  Contact: 8130496898 / 8130496899 / 8130496896

  Service level: carry - in

  It may take 3-5 days to get the replacement if necessary. Let me know if the issue not resolved.

• Cannot burn CDs or DVDs, get code error 380381-26-00037200

  Original title: DVD problem

  I can't burn a cd or a dvd, error code 380381-26-00037200 appears. CD DVD & cannot be formatted

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• DVD Player reads no CD and DVD

  I have a laptop Dell Inspiron with Vista 64 bit, which is a year old and a few days ago that the DVD drive stopped reading discs. When I insert a disc and try to open it I get a pop up window that says "insert a disc. Please insert a disc into drive f"and then there's a link to"help me choose a disc ". That is the way I use to access the computer disk (Windows Media player, iTunes), I get the same window.

  In the order I did the following: I restarted the computer. I tried to read several different CDs/DVDs that I know have worked before. I ran the anti-virus software, which has identified a virus, quarantined it and I removed it. I assured my drivers are up to date and I uninstalled equipment and reinstalled. I tried restoring the system several times, but after restarting the system restore, I get a message that says: he was not able to restore the system.

  Any help on this would be appreciated. Thank you.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Relocation of 7 home 64 bit by usb. Windows Setup needs a driver. message reads (a required CD/DVD drive device driver is missing).

  54i have a computer laptop m18x by Mei alineware reinstall 7 home 64 bit by usb. Windows Setup needs a driver. message reads (a required CD/DVD drive device driver is missing.) funny iam not to use a cd or a dvd. IAM using a USB flash drive. weird. If anyone can help.  Thank you wberlin

  Probably the installation media itself is corrupt. If your Alienware is preinstalled with Windows 7, then you should be able to reinstall using the recovery partition:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  To restore the image while preserving the data files:
  Turn off your computer.1.
  Disconnect all devices connected to the computer (such as USB key, 2 printer and so forth) and remove any recently added hardware in-house. NOTE: Do not unplug the AC adapter cable.
  Turn on your ordinateur.3.
  When the Alienware logo appears, press several times to access the 4. Advanced Boot Options window. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again.
  Select 5. Repair your computer.
  Select 6. AlienRespawn and backup emergency in the System Recovery Options menu and follow the instructions on the screen. NOTE: The restore process may take an hour or more depending on the size of the data to be restored. NOTE: For more information on AlienRespawn, see article 353560 at support.Dell.com knowledge base.

  Source:

  http://support.Dell.com/support/eDOCS/systems/M18x/en/mm/MM_en.PDF

  If the recovery partition does not work:

  Step 1: Download a copy of Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• My Windows Media says it is not compatible with any DVD security code I try to play.

  I use my DVD player on my computer all the time when I want to watch a movie and am not in a room with a DVD player. I just used it about 3 days ago and it worked fine. Now, when I put a DVD, a DVD, an error message appears saying that Windows Media is not compatible with security on the DVD (s) codes that I'm playing, and I need some sort of update. It doesn't tell me what I need and when I click on 'web help', I said that there is a mistake, and that there is no other info. I'm not a geek of any kind and do not really understand computers for use much more basic. Please help me understand what the problem is, and if I need an update, where. Thank you.

  Hi Mary,

  Thanks for posting this question in the Microsoft Community.

  I'll try to help you get the problem solved.

  I would be grateful if you could answer the following questions:

  1. Are what you signed up as an administrator?
  2. Are you aware of any change (software or hardware) performed on the computer before the show?

  You can perform a System Restore to the date when the computer was working fine and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.