Readers or removable drive opens in the new file Explorer

Similar Questions

• Network with Windows Home Server hard drive. With the new files that wouldn't be no automatic update.

  Installed Windows Home Server 2011 on my files allocatted to share on my wireless network, including a hard drive 2 TB external. Worked well able to watch movies, listen to music etc... As several files have been saved on the external hard drive (800G now) he would not recognize the new content (files or movies) previous content is ok, but nothing new would not reconise. Unplug the hard drive from the PC, pluged into the TV via USB and all the files are there, old and new. My PC is 3.2 GHz 1 G RAM and running Windows XP I was wondering if anyone know what would cause this? It would not be because I only have 1 g of ram?

  original title: unable to recognize new files

  Hi Tony,.

  Since the issue is with Windows Home Server, I suggest that you post your question in the Forums Windows Home Server.

  Windows Home Server Forum

• Stop "save under", the opening of the new file?

  I've saved an Illustrator CS3 file in PDF at various stages.  I have to make small changes to the .ai file and then save to the PDF format throughout the book.  The problem is that the .ai file is closed and the new pdf opens in its place.  It is a nuisance as I reopen the .ai file and a few times that I accidentally found myself working on the PDF file.

  Can you keep the original file open and the saved pdf file and not opened?

  Thank you

  Using save a copy instead of save it under. keep in mind, however, that you must save the changes to the file HAVE separately.

  Peter

• Windows XP Add Remove Programs opens, but the list of programs will not appear?

  Windows XP Add Remove Programs opens, but the list of programs will not appear? Can check the programs add and romove, but when the next screen appears to list all installed programs nothing happens, it just says: waiting will list is bieng prepared, expected 15 minutes still nothing, never had this problem before. Thank you

  Alas...

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Click Start, run and enter the following command:

  regsvr32 appwiz.cpl

  Click OK and you should see a message like this:

  DllRegisterServer in successful appwiz.cpl

  Restart and see how things look now.

• Unable to see the new files from the external hard drive in Windows Media Player library

  Original title: music is dead

  Windows media player does not recognize my external hard drive on all my computers windows 7, but works fine on my xp. has taken the laptop shop they led produced songs media player then reinstalled them, and it worked. but when I added more songs on the ext. harddrive and tried to play on windows media player 7 it does not find new! can't afford to take to the store whenever I have download music and want to play on my Media Player 7. is it auto recognition? When I plug the ext. harddrive inside automatically so reads the news on it?

  It has been fixed thought

  I had posted a question on my Ext. harddrive, my windows xp Media Player recognizes new music I have add out of it, but all my computers which are used to windows 7. then I myself especially when I add the new music on the hard drive for media playyer on xp I have spend the toolbar and click on file, then click Add to library computer search and it adds to the media player library. but windows 7 does not have this option. I noticed if you click file, and then manage libraries, and then the music lets me add my Ext. harddrive (e drive) to the library list. on a computer it support of new music and videos found on the hard drive, on two computers it just music, so I downloaded a song and a video on the hard drive, plugged into the computer and media player says that it has been updated of library, and yet there they never found the new files. Why have they changed? XP was so easy. new is not always better!

  Hi Bob,

  According the description preceding, Windows Media Player is not picking new music on the external hard drive.

  I suggest you to perform the following troubleshooters.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Open the troubleshooter in the Windows Media Player library
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Post us the results once you try the steps above.

• Anyone else want to get rid of the words "Press to open" on the new lock screen?

  Is there a way to get rid of the words, "Press to open" on the new lock in iOS10 screen? I really don't need to be reminded every time how to unlock my phone, not to mention that I think that they look ugly.

  Tell Apple

  feedback line

• Everytime I open a new firefox window, a new tab opens with the new window. How do I stop this?

  Everytime I open a new Firefox window, the new window opens to the page of hope (as I want him), but then a tab opens with the new window. I want Firefox to stop doing this. When I open a new window I want just the window to open it. I don't know how to solve this problem I've known idea how I did that happen. First of all, it happened when I hit Ctrl + N to open a new window, but I did not hit the "N" itself. I pressed one of the other keys around the "N" and this issue has started.

  It's quite strange!

  Have you tried to reset Firefox? You will find all the information you need to reset, here:

  Firefox - modules to reset and refresh settings

  Let me know if it worked!

  See you soon!

• My dvd drive opens at the beginning and will not be closed.

  My dvd drive opens at the beginning and will not be closed. How can I solve this problem?

  Hi Showme66,

  A. from when what happens?

  B. what happens when you try to close the drive?

  C. recent changes made on the computer?

  D. the DVD drive opens automatically at startup?

  This problem may occur if one of the following scenarios is true:

  • Drivers filter in the CD and the DVD storage stack are not migrated successfully to Windows Vista.
  • You have uninstalled the CD software that fails to withdraw properly in the registry.
  • You have installed software that adds filter drivers in the CD and the storage stack of DVDs that interfere with existing filters.

  To resolve this issue automatically, click the fix this problem link. Then, click run now button from the Automated Troubleshooting Services page and follow the steps in this wizard.

  http://support.Microsoft.com/kb/929461

  Please post back the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] Marking a post as answer, or relatively useful, you help others find the answer faster

• How can I get my PDF to save mode landscape instead of portrait orientation? I am able to turn to see the landscape and save the file. However, when I open the new file is saved, it's back to portrait mode. Help!

  How can I get my PDF to save mode landscape instead of portrait orientation? I am able to turn to see the landscape and save the file. However, when I open the new file is saved, it's back to portrait mode. Help!

  Hi samanthac39242619

  You must register to organize PDF service https://cloud.acrobat.com/organizepdf & use PDF tool organizing to turn the pages at all times.

  Kind regards
  Nicos

• Problem with writing in the new file every day, error #1

  Hi, I have build a vi that writes data measured for each second of the file. This vi will be used for the acquisition of long-term data and I want to write the data to a separate file every day, else the file becomes

  very large. The vi is supposed to work like this, first set the folder to save it and then start logging with the "datalogon" button, first write the column names in the file and after that write data

  every second. If the date is the same newspaper, data, if the date is not the same write the new file name, write the column headers and write the data again every second. The date is used as the file name.

  This work is quite good only at the beginning of the vi I get the message "error 1 occurred open/create/replace the file writable spreadsheet String.vi-> write to the spreadsheet (string) .vi-> NHR file -

  SerialDaq - 03 APR 2013 .vi. I did some tests and it seems that in the first or the second round of the loop, the path in the annex is ' file name:------"and not drive:- and this seems to be caused by the fact

  that I first write the column headers, and then the data (if I write only the data of the problem does not occur).

  So I (think) for what is now the problems but don't don't know how solve it, I would appreciate it if someone could help me with this.

  Regards, Martin

  I made the change you mentioned and to my surprise I got the error message and also, with the vi you sent, I took look at it and found that:

  -If I first enter the "folder to save the file', then run the vi and then press on the" data connect "I don't get the error.

  -If I first run the vi, then enter the folder ' save file to "and the hit" the data log on ' I get the error.

  I also tried with the vi original (without the connection shiftregister in the case of false and init for removal) and which gives the same result as above. If I get the

  error message and choose stop the vi, start the vi again once I don't get the error because the folder in which the file is entered. This issue appears only when there is no file «»

  to save the file "in the dialog box.

  While I'm writing this I realize that "folder to save the file" is outside the while loop so only executed at the start of the vi is maybe I have to put it inside the while loop? A tried

  This and at first, it seems that the problem is solved, I don't get the error message on my screen, but it still appears on the error handler in another part of the vi (visa series).

  Oh, Yes. The 'name of the resource visa' and 'file to save the file' are both outside a while loop and are only read at the start of the vi, at the moment they have not a valid

  the error value is generated.

  Problem solved, thank you for your comments!

  Regards, Martin

• CS6 Illiustrator crashes when you create the new file

  Hello.

  I'm using windows 7 x 64. And I installed the two Illiustrators x 64 and x 32. I open the Illiustrator but when I try to create the new file Illiustrator stop working.

  Windows 7 Hompe premium x 64

  processor i3 4x2.93

  RAM: 4 GB

  network with printers

  

  error reaport

  

  Hi Philippe,.

  We are really sorry for all the inconveniences that made you.

  Try the following steps to check the issue.

  1 try resetting preferences

  Press Ctrl-Alt-Shift on PC as soon as you click on the Illustratir icon to reset the preferences to the default settings.

  2. If this help not try to remove all printers from the system one & check.

  3. in addition, you can try to set the boot system & check if still HAVE plant if you try to create a file.

  At the same time if these steps does not resolve your problems you can contact Adobe support by following the link below:

  http://helpx.Adobe.com/contact/

  Thank you

  Florian

• Windows Homer Server Media Center not showing the new files I downloaded

  So I installed WHS2011 and thought that the library would easily work. It seems that the new files I put on the server are not get updated when I try and view them through the Media Center. Also when I serach for libraries on another device, it shows me two homeservers, one who say no files present and the other who has files (but does not update the index!). What is going on? (the file types are the same as the other files that are appearing fine)

  It is a basic installation, the only change I made is to move the directory to a new hard drive and update the WHS settings to point to the serverfolder updated on the new hard drive.

  I checked the settings on the media section of sharing control panel and it's on, I also checked on the dashboard and the media of Stentor is enabled.

  Why are my new files not updated in the index?

  Why two media servers on my other devices?

  Hello

  Your question would be better suited for the TechNet forums.

  I suggest you to ask your question to the forum Server TechNet for better assistance.

  http://social.Microsoft.com/forums/is/whs2011/threads

  Thank you.

• Server data store will automatically get updated when the new file (with the same name) is placed in the landing area

  
  Hi guys,.

  The data store server-side will get automatically updated when a new file with the same name is loaded in the landing area?

  for example

  1 data store created for server-side get the file named UK.xls (he has 5 rows)

  2 snapshot created for the above data store

  3. created with the snapshot process

  After that if I remove 2 lines from the same file and load again to the landing (with the same name). So by re-running the process will take the last file OR do I need to reload the file in the data store every time when there is a change in the file. We also tried with option to work but the last file was not picking up.

  Any help will be really appreciated.

  Please lets us know your updates.

  Please advice

  Thank you

  VT

  Hello

  When you create a snapshot, you create a snapshot whose task (provided that you use a data store server-side) can be run from a job. To refresh the data, run the snapshot in a job task. If you create a task at the time the snapshot and the processes that use it, they will automatically connect and will be 'upstream' data through the snapshot in the process. You can then choose whether it would be appropriate to write the snapshot or not (for the effectiveness of performance if you want to do the straight through processing) by activating or deactivating the bucket of data staged that the snapshot written to. The snapshot in the work task means that the data is refreshed.

  For the work of design to the Director, you can refresh the snapshot by running again it manually in the context menu.

  Kind regards

  Mike

• How to associate VM Windows drive letters with the vmdk file?

  Guys,

  I couldn't find a forum ESX 3.5, so post the question here.

  # vmware - v
  VMware ESX Server 3.5.0 build-317866

  with Windows 2003 SP2 invited and many readers of mouted on clients.

  I need to know how to map the Windows drive letters to the vmdk files on the host. for example

  C:\ > hand NET
  

  Share name resource remark

  ---------------------------------------------------------------------
  $           R:\                             Default share
  $           B:\                             Default share
  $           C:\                             Default share
  $           S:\                             Default share
  $           X:\                             Default share
  $           P:\                             Default share
  $           Y:\                             Default share
  $           Q:\                             Default share
  $           I:\                             Default share
  $           F:\                             Default share
  $           W:\                             Default share
  $           G:\                             Default share
  $           D:\                             Default share
  $           T:\                             Default share
  

  
  

  [root@esx01 DB1] # ls-l *.vmdk
  -rw - 1 root root 142807662592 6 June 2008 DB1_1 - rdmp.vmdk
  -rw - 1 root root 367 14 Jul 22:02 DB1_1.vmdk
  -rw - 1 root root 285615325184 6 June 2008 DB1_2 - rdmp.vmdk
  -rw - 1 root root 367 14 Jul 22:02 DB1_2.vmdk
  -rw - 1 root root 1073741824 6 June 2008 DB1_3 - rdmp.vmdk
  -rw - 1 root root 363 14 Jul 22:02 DB1_3.vmdk
  -rw - 1 root root 142807662592 6 June 2008 DB1_4 - rdmp.vmdk
  -rw - 1 root root 367 14 Jul 22:02 DB1_4.vmdk
  -rw - 1 root root 128849018880 6 June 2008 DB1_5 - rdmp.vmdk
  -rw - 1 root root 367 14 Jul 22:02 DB1_5.vmdk
  -rw - 1 root root 37580963840 Sep 26 17:58 DB1 - flat hard
  -rw - 1 root root 337 14 Jul 22:02 DB1.vmdk
  -rw - 1 root root 287762808832 8 November 2008 FOO-DB1_1 - rdm.vmdk
  -rw - 1 root root 364 14 Jul 22:02 FOO - DB1_1.vmdk
  -rw - 1 root root 21474836480 18 April 2009 FOO-DB1_2 - rdmp.vmdk
  -rw - 1 root root 374 14 Jul 22:02 FOO - DB1_2.vmdk
  -rw - 1 root root 42949672960 18 April 2009 FOO-DB1_3 - rdmp.vmdk
  -rw - 1 root root 374 14 Jul 22:02 FOO - DB1_3.vmdk
  -rw - 1 root root 429496729600 10 October 2009 FOO-DB1_4 - rdmp.vmdk
  -rw - 1 root root 350 10 October 2009 FOO - DB1_4.vmdk
  -rw - 1 root root 429496729600 10 October 2009 FOO-DB1_5 - rdmp.vmdk
  -rw - 1 root root 376 14 Jul 22:02 FOO - DB1_5.vmdk
  -rw - 1 root root 107374182400 18 December 2010 FOO-DB1_6 - rdmp.vmdk
  -rw - 1 root root 376 14 Jul 22:02 FOO - DB1_6.vmdk
  -rw - 1 root root 107374182400 18 December 2010 FOO-DB1_7 - rdmp.vmdk
  -rw - 1 root root 376 14 Jul 22:02 FOO - DB1_7.vmdk
  -rw - 1 root root 161061273600 Sep 27 2008 FOO - DB1 - rdmp.vmdk
  -rw - 1 root root 374 14 Jul 22:02 FOO - DB1.vmdk

  I need to know what vmdk is used for the drive in the Windows of the client prompt. I'm afraid that I could not understand it in the vmware.log or hostd.log files.

  Thank you!

  Steve

  Hi Steve

  You cannot map the drive letter for the vmdk directly, but you can map the drive Win on a specific vm using the SCSI number

  An easy way to map the vmdk with disks of Windows is:

  On the virtual machine 'change settings', note in down all the vDisks SCSI address example (disc 1 = SCSI (0:1), 2 HDD = SCSI (2:4)))

  If you go to Windows disk management and right click the individual disks and select Properties, you will see that target and LUN ID discs

  where for 1 HDD = SCSI (0:1), 0 is target ID and LUN 1 ID and 2 HDD = SCSI (2:4), 2 is target ID and LUN 4 ID

  You map just for numbers of hard disk drive letters

  Please allow points to useful/correct answers

• I can't add new tabs to my window, or by clicking on the little + on the right of the last tab or CTL T or the new file tab. This problem was recently

  1. Question

  I can't add new tabs to my window, or by clicking on the little + on the right of the last tab or CTL T or the new file tab. This problem was recently

  The Ask toolbar is initially only in versions of Firefox 3.6.x. uninstall this extension.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons