ReadyNas NV + unable to communicate via Raidar/Frontview V1

Similar Questions

• P1102w "unable to communicate with any wireless router using the provided SSID"

  Hi all, apologies if there is an answer to that somewhere, I took a look, and several people have had something similar, but without a clear resolution.

  I got a job p1102w successfully for about 2 years now and this week he suddenly won't print wireless. No recent changes to the network, no change to the printer, no changes to the computer.

  No luck with simple things so I reinstalled the printer (it works via USB), but when I get to the wireless network configuration steps I encountered a problem.  Automatically scan for wireless networks detects my home network, but by selecting translates "unable to communicate with any access point or wireless router using the provided SSID. The same error message occurs when you try to connect to a network wireless of my neighbors.

  Any ideas would be very appreciated.

  Isaac

  At this point, I would say that there is a problem with the card wireless in the printer.  Do you know if this printer is under warranty?

  www.HP.com/go/warrantycheck

  If your printer is still under warranty, then I suggest call HP for Technical Support on this printer.

  Contact HP worldwide | HP

  Jason

• Re: Satellite L300D - unable to connect via WiFi network

  Any help please? -I just L300D with Vista professional.
  Crossed troubleshooting but still unable to connect via the wireless network - no probs with other laptops.

  When going through "Toshiba assist" message arrives "this wireless network device is disabled.

  Please activate the device"- button wireless is activated with light yellow?

  any ideas?

  Are you sure that the laptop wireless switch is on?
  Look in the Device Manager. Maybe it's the wireless network card disabled. So activate it.

  Also try an update of the WLAN driver. You can find it on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com

• Satellite L350 - unable to connect via a WLAN

  Hello
  New to this lark of thread

  You just bought a L350
  I have managed to connect to the Internet via a cable, but am unable to connect via wifi.
  WiFi is turned on. He finds my BT Home Hub but when I connect, it just says: it's impossible.

  Help, please

  Have you checked the Wifi device in Device Manager? The driver is properly installed?

  Try turning off your firewall, which could block the Wifi connection.

  Also try to press Fn + F9 to toggle wireless devices

• Unable to communicate with the printer HP 4630

  Continue error message of "Unable to communicate with the printer." Even when connected by USB.

  Have reinstalled the software several times, checked the wireless (no problem), printed many pages of configuration directly from the printer.

  I keep trying to add the printer to my preferences. One thing is that it will only add like a scanner or fax, a PRINTER. It is also called Hello Scanner. Why can't I add as a printer?

  Now, it will not also let me COMPLETE reinstallation of the software, it freezes at the section add printer and I can't move forward. So frustrating...

  Help!

  Hi @PKahn

  It seems that the computer does not recognize the print driver.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• HP Officejet Pro 6830: Unable to communicate with the Scanner

  Printing is fine and just impossible to scan.

  I tried to solve the problem of scanner/copy of the measures:

  1. run a 'HP Print and Scan Doctor' to check

  2. click on 'Scan of difficulty' to identify the error

  3A through the steps with all green ticks, with the exception of the driver with a «!»

  4. with the result, I went and download the latest driver to update the scanner and also did a update system for you ensure that the printer is so far

  5. after the update I still get this message from the scanner "Unable to communicate with the Scanner" and when I press the button of scan/copy the printer only a "ding" sound occurs but nothing is scanning / copy

  Note: I brought the printer 2 months ago and this is the first time that's happened

  Hi @Flash1688,

  Welcome to the HP Forums!

  I see that you are unable to communicate with the Scanner with your HP Officejet Pro 6830 on Windows 8.1. I'm happy to help you!

  If you just try to make a copy with the printer, it works? You see on the screen of the printer error messages? Copy of Documents. Also, if you lift the lid of the scanner during the copy process, you see a light come ON and the scanner bar moving?

  In the meantime, please, try the procedure described in this guide, a message 'no computer found' for HP Officejet 6810 and HP Officejet Pro 6830 e-all-in-one printerand let me know what happens!

  I hope hear from you soon!

  "Please click the Thumbs up icon below to thank me for having responded."

• Error: "unable to communicate with the TWAIN device" with brother MFC7820N

  Original title: can I connect a scanner through a switch?

  I'm trying to analyze something like I did it many times with my brother MFC7820N hung on my tablet. But recently, I replaced a 2nd router I had in my system that failed with a new Dynex switch.

  I have my internet modem and 2 computers connected to a Linksys wireless router. I have another ethernet cable connecting the router to a new switch. I have my 2 printers attached to the switch. One is a Brother HL-2700CN color laser and the other is a brother MFC7820N mutli-function. It use PaperPort to scan stuff on him, since provided on the CD with the device.

  So today I open PaperPort and click the Scan button and it appeared an error saying unable to communicate with the TWAIN device box.

  So I clicked on a doc shown in PaperPort that I had scanned a few weeks ago and I click right and select Print and printed to this MFC7820N.

  Then I come back to click on scanner again and yet again, it appears that box. So I watch and WIA-Brother MFC-7820N LAN is displayed in the Scanner marked drop-down list box. So I switched the power of the MFC and tried again and it still appeared that same box again.

  OUCH! I'm going nuts! You have any ideas?

  Hi Jeff has Davis,
   
  Method 1: Uninstall and reinstall the driver again and check if it helps fix the problem.
   
  See this article for more information:
  How to manage devices in Windows XP
   
  Method 2: Try the suggestion given in this article:
  'Could not enable TWAIN Source' or 'He has not find scanner' Error Messages are displayed

• ScanJet G3110 - 'unable to communicate with the scanner' error message

  This Scanjet has worked well over the years.

  I don't remember making any changes, but now when I click on any option (for example copy or scan to email... all options) I get the error «unable to communicate with scanner» HP

  When I click on "Preferences of the Scanner", the Apple preferences page with a popup that reads:

  To use the "HP Scanjet", preferences preferences pane system must leave and reopen it.

  I click OK and system preferences change to 'Preferences system (32-bit)'

  I click on the HP icon and it opens to "no value / not connected".

  I have reset the scanner; have you checked all connections... no change.

  I put on computer.

  The scanner scans noise when it starts up.

  But when I press the "scan" button (or any button) on the scanner itself, nothing happens.

  Using OS X 10.6.7

  Any ideas?

  Hello nikhil_gupta

  The Scanjet series of scanners is of commercial products. I suggest you post in the HP Business Support forum for a better chance to find a solution, because it's the boards of HP for the consumer and there are people less familiar with this product range.

  You will find the Board Commercial Scanjet here.
  HP Business Support Forum: Scanners

• Error "" unable to communicate with your printer - this may be due to a firewall - check port TCP/UDP 139 is unlocked - reconfigure the firewall.

  "Unable to communicate with your printer - this may be due to a firewall - check port TCP/UDP 139 is unlocked - reconfigure the firewall.

  Original title: how to install the printing software to solve the error message?

  Hello

  Follow the troubleshooting steps in the following article and make sure that port 139 is unlocked:

  Windows Firewall may block some programs to communicate on the Internet after you install Windows XP Service Pack 2

  See also:

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  Note: Information provided in the article applies to Windows XP with Service Pack 3 (SP3) installed.

  If you use a third party firewall, I recommend you contact the software vendor for assistance.

• receiving the message "unable to communicate with the TWAIN device.

  I get the message "unable to communicate with the TWAIN device.

  Hi Kim,

  What is the brand and model of the scanner?

  For now, you can have a look at the link:

  http://nuance.custhelp.com/app/answers/detail/A_ID/3572/~/%E2%80%9Ccannot-communicate-with-TWAIN-device%E2%80%9D-error-message

  http://www.computing.NET/answers/Windows-XP/BRO-MFC240C-scanning-problem/160840.html

  http://www.hwkb.com/Uwe/Forum.aspx/scanner/615/scanner-problem-TWAIN-vs-WIA

  http://forums.techguy.org/hardware/270578-brother-mfc4800-scanner-kicking-my.html

• error: unable to communicate with the printer

  I can print a test page for the hp deskjet 3510 series: hp printer assistant application on my laptop and I can print to the printer by sending an email, so I know that it is connected to the network and I know that my laptop can be printed on it. But when I try to print from Word or any other application I get an error: unable to communicate with the printer

  Any ideas?

  Download and run this: http://support.hp.com/us-en/document/c03286146

  What did he say?

• Unable to communicate with the printer E710 6500

  I have a HP Officejet 6500 a Plus E710n-z.  He has in the past, but is no longer connects (by wireless) to my computer (Apple OSX 10.8.4).  It became intermittent in the last month, and then did not answer at all.  I had a growing list of items to be printed.

  I followed each step- http://support.hp.com/us-en/document/c02205477 .

  WiFi to each is not a problem.

  The printer has been disconnected (deleted) as the printer from the computer.  I was able to add in the part 'scanner' printer, but cannot add to the printer - it has the message "unable to communicate with the printer.

  What should I do next?

  I you sent a private message with the steps you need to perform the reset.

  Good luck
  Kyle

• HP laser jet 8150n, unable to communicate with the printer?

  I have problem with my printer, I have him connect with lan cable and the green light only works printer not at the top of the Tower, I can search and find but when it verifies something it says 'Unable to communicate with the printer' one has the solution? Thanks in advance.

  I'm sorry, but you have the wrong forum. These are the forums of consumer printers of the class, and you have business to printers in class forums business like yours. Just follow the link and you will be in the right place.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UBw16U2PVM4

• HP Officejet 4620: Network printer shows unable to communicate after being unused for 4 hours.

  Printer prints as it should after being turned on.  After being unused for about 4 hours but always enabled, when ordered to print the printer does not print and the computer displays the error "unable to communicate with printer."  However, if the printer is then turned off and then turned back on, it prints without error.

  There are a few possible solutions.

  1. Firstly - check if your firmware is up to date. (Firmware update instructions)

  2. make sure that your point of Wi - Fi networks firmware is up-to-date.

  ? -Is this wireless light (little blue light by the wireless button) stay on all four hours?

• Internet Explorer message: "unable to connect via the parameter to wide band".

  When I try to connect to Internet Explorer, I get a message saying unable to connect via the parameter to broadband. We have AT & T Wi - Fi that I seem to be the only one of 4 people in our House, that has a connection problem. We all have different types of computers, some run Windows 7 and others are Vista. Don't no if this material. I preformed a few tests without results of troubleshooting. Help, please

  [Original title: programs network networking Internet site Internet website URL website network]

  Hello

  ·         What is the exact error message you get when connecting to internet?

  ·         Which is the browser you use to access the internet?

  ·         You are able to use other internet applications such as messenger etc?

  I suggest you follow the steps below:

  Method 1:

  Follow the steps in the link below to connect to the internet in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 2:

  Follow the steps outlined in the article below if you can not connect to internet:

  http://support.Microsoft.com/kb/956196

  Method 3:

  If the steps above do not follow the steps in the link below for network connection problems in windows:

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  I hope this helps.