reboot with Vista problems

Similar Questions

• STARTING WITH VISTA PROBLEM

  All of a sudden (now about 3 months ago), for any reason and without any precedent issues, Vista has started to not initialize properly - no, eventually I discovered after several attempts, first by pressing enter and then CTRL + ALT + DELETE, and then succeed to open my office dafeult. Since then, I have tried several of the recommended "startup repair" patches (etc.), including the MS recommended ones, but so far nothing is. Any ideas anyone please?

  "I tried several of the recommended"startup repair"patches (etc.), including the ones recommended MS,

  It is useful here if you say that you tried!

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon,.

  Mick Murphy - Microsoft partner

• Satellite P100-434: wireless connection with Vista problem

  Just bought this laptop with Vista and so far could not get the wireless to connect, I have 3 other computers and they will all connect, I have reset the router and set up new accounts on other computers without problem, but unable to do it on the P100.

  I tried the new RADAR feature and will not pick up all the networks, but by trying to establish a new connection it shows that a wireless network is available but it is nameless, although my network is named, I took the passkey of the network so that it is open but still does not connect, LAN via ethernet fine work.

  Wireless switch is on, but when I drag off switching wireless says WE

  Hello

  I can't give you an exactly the answer why you cannot connect to your WLan with Vista because there are so many options that should be checked.
  But I think that you will find the solution yourself with a little help from the Microsoft Web site.

  Please see this site:
  Connect to a network with Windows Vista wireless
  http://www.Microsoft.com/technet/community/columns/cableguy/cg0406.mspx

  You will find many useful tips, screenshots and Tips how to connect to WiFi with Vista.

  Please post again if you have found the key

• My windows always reboot with driver_violation problem

  My windows 8.1 always reboot with driver_violation probem, I can't do anything. Who can help me?

  Hi Lodinsh,

  Welcome and thanks for posting your query in Microsoft Community, the best place for all your windows related queries.

  From the description, I understand that you are facing a problem with Windows restarts randomly.

  I would be really grateful if you can help me with the following information to help you best:

  1. You did it all changes before the show?
  2. What is the brand and model of the computer?
  3. You have installed all current windows updates and update all device drivers, after upgrade to 8.1 Windows?

  Method 1: After the update, if you have not updated the drivers, please go through the link below and download the drivers for your computer.

  Download and install the drivers: http://windows.microsoft.com/en-us/windows-8/all-drivers

  Check Windows updates for all the recommended, optional and important which may include updates to the hardware devices also. See the link below for more information on Windows Update.

  Windows Update: Frequently asked Questions: http://windows.microsoft.com/en-in/windows-8/windows-update-faq

  Method 2: In addition, you can perform the scan of the file system (CFS) Checker to check if there are any system files corrupted which may cause this problem. See the following steps to perform a scan SFC:

  1. Press the Windows key + X, select prompt (Admin) to bring up the elevated command prompt.
  2. In the command prompt, type the following command: sfc/scannow , and then press ENTER.
  3. After the scan, restart the computer.

  Hope this information is useful. Please update the status of the issue. We will be happy to help you.

  Thank you.

• Help! No audio output device is installed on a gateway with Vista problem

  I searched and nothing found which strives to resolve this problem. There the cirlce Red w / White x where is the volume control button.

  -J' tried to update the driver but it says that it is up-to-date
  -J' tried something with restart of audio and audio endpoint in services

  The computer is a Gateway laptop model: mt6723
  Sound, video and game controllers: Sigmatel High Definition Audio CODEC, unsupported Standard Game Port

  If anyone has any info that can help with will be greatly appreciated
  Thank you

  Alfred

  These hardware scan sites are a waste of time, better to look manually as shown above.

  Sound Device arise under the sounds?

  Otherwise:

  REBOOT - under sound click right panel where it says no Audio devices installed - check Show
  -Show hidden devices - disabled devices highlight speakers - lower right properties - turn on the device

  What are the drivers for your direct gateway system

  You can have this one - check under Device Manager sound

  32-bit Vista SigmaTel Audio Driver Version: 6.10.5365.0 - 05/10/2007
  HTTP://SUPPORT.GATEWAY.COM/SUPPORT/DRIVERS/GETFILE.ASP?ID=21535&DSCR=SIGMATEL%20AUDIO%20DRIVERVERSION:%206.10.5365.0&UID=242736959

  If you need it - download - SAVE - go to where you put it - RIGHT CLICK - RUN AS ADMIN - after restart
  each installation of the driver.

  Don't forget to compare versions in device - sounds like audio often rollback - so do drivers Manager
  of course, the installed version is 6.10.5365.0 - Run - Reboot - check until this version presents itself.

  Then repeat with this last one - Vista 6 - 10.5939
  HTTP://SUPPORT.GATEWAY.COM/SUPPORT/DRIVERS/GETFILE.ASP?ID=22199&DSCR=IDT/SIGMATEL%20AUDIO%20DRIVER%20VERSION:%206.10.5939.0&UID=242738947

  Don't forget to compare versions in device - sounds like audio drivers Manager often rollback
  Run - Reboot - check until this version presents itself.

  If the driver will update just don't use this method then reinstall (and later check the version).

  How to do to reinstall IDT (was Sigmatel) audio driver on the Vista system migrated
  http://www.IDT.com/content/Vista/HTML/index.html

  To find the only other drivers online gateway for your mt6723
  http://support.gateway.com/support/drivers/ddaStep.asp?tab=all

  Another thread with a possible fix
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/b5e3250b-2ffc-443e-8e67-4b0feaf6612e/

  ---------------------------------------------
  Pipersmyst last nights number you can try the above in my 1st message or do a system restore
  up to a point before the problem however, you will need to update your drivers for installing SP1.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Microsoft Vista SP1 update is not available because the audio driver
  http://www.IDT.com/?app=Knowledgebase&ContentId=4836

  Rob - bicycle - Mark Twain said it is good.

• Internet with Vista problem

  Hello

  I am able to connect to internet to all the computers in my house... except one... my office - he has Vista... don't know if it of a Vista issue or not.

  On my desk, I am only able to connect locally to the router, but not to the internet. When I run a "diagnose connection problems", I get the following message: "cannot communicate with primary DNS (192.X.X.X) - diagnostics network ping to the remote host server, but has not received a response.

  I am connected to the router and I know that I have a connection between the computer and the router... However, for some reason, the router doesn't connect with the internet.

  I tried reseting the network adapter "connecting to LAN" - but that has not solved the problem either.

  Any help is appreciated... problem was raised only in the last day

  Had the same problem - Dell called and they told me that last update of Windows has a problem and they had loads of calls since the update came out this weekend.

  Open system - system restore tools and restore before updating on 18 August and everything should be OK. Don't forget to turn off the automatic updates until Microsoft fixes the problem

• reinstall with Vista problem

  I tried to reinstall Windows Vista once a virus has infected my computer then I used a reinstallation disc sent with the computer. He told me that there was not enough space for the installation, so I formatted the single Partition that was available and it still won't let me reinstall and now I can't start from the bios, I only can boot from the cd - dvd drive. Why is it not let me reinstall Vista?

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Keyboard with Vista problems

  I have a Dell Studio and can not get my 4000 natural ergonomics of Microsoft to work with her.  A lot of shortcut keys will work for example the calculator, but he sleeps with no letters or numbers, and most of the other functions are not no longer works. I reinstalled it, rebooted and basically redone everything and again, it won't work properly.  Someone please help!

  Hi Mynae,

  Try to download the software from the link given below below and try if the keyboard does not work properly.

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK&type=keyboard&SKU=B2M-00012

  After return the result

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Strange rebooting with w530 problem

  I have my W530 for about 6 months and there was a little annoying problems early. I also have a T510 who has more than three years and they both the same OS (Windows 7) and the same brouser (Firefox 30) and AV (Norton Internet Security) software function. And yet, while the T510 always perfectly executed, the W530 hesitates and quivered for five to ten seconds when I click on the close button. Not a major, but quite annoying problem. On the other hand, the T510 closes very easily, immediately past the on-screen "Shutting down...". ».

  But it's not the worst. Worse than it is this constant stopping and hesitant as I type, as is happening now as tape this message... The cursor stops flashing for a few seconds and I have to wait until it is once again back alive... The same question is repeated in many other situations, like when I use the wheel in my mouse to go to the top or the bottom of the page, or when I try to move the cursor to the right of any page. This apparent interruption happens every few seconds as, say m, 12 to 15 seconds, which is a great nuisance.

  It can be the cause of this behavior of starnge? As I said, my T510 running the exact same software and none of these issues.

  Thanks in advance for any ideas.

  Hi legras,.

  Welcome to Lenovo Community!

  According to your request, we understand that you are facing problem with suspended frequently on ThinkPad W530 system.

  To resolve the issue please check with update all the driver for your system or application of ThinkVantage system update to download and install it. This kind of problem occurs with pilots or if there is a bad sector on the HARD drive.

  After installation, run the application so that it will look for all the required application and the driver for your system, and it will update.

  If the issue continues after updating the app, please check with the Lenovo diagnostic tool to check if there is any problem with the HARD drive or memory.

  Here is the link to access the download page and download the latest application accordingly, please click 'Select Product' and in 'FAST LANE' enter the MTM don't. Select the exact model.

  http://support.Lenovo.com/en_US/downloads/default.page#

  I hope this helps.

  Best regards

• speed with vista problem

  Hello
  I have internet café, I buy all new computer with process of amd le1661 and ram is 2 GB, but my computer is very slow please tell me what ineed to do
  thanx
  Micheline

  Hi DHILLON007,

  Take a look at this link which describes several things you can try to improve the performance of your system:
  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance
  Let me know if this helps or if you need further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Ping with vista problem

  OK, that was my story...

  It is a weird error.

  Anyway,.

  I recently changed my internet provider cos had problems with the old funding, etc. My new provider is clear high-speed I think. It's one of these usb connect modems.

  The speed seems pretty normal and I was able to go on websites. This site or the server is the only one I seem to have a problem with.

  Sound on a Korean server.
  But I'm going to Korean sites all the time and the speed is normal. In front a site I spend supposed to be slower then this site Oo, but again it loads quite fast while my friends can barely get on that.

  The site is nate.com / cyworld.
  Both nate.com and cyworld have the same server, I think.

  It was the Korean site the fastest, that I went. & While I was on the crappy internet. As almost as slow as dial-up. But then they merged with this site called nate.com and the search engine, it there was a little slow with the site. Minihp URLS seem not to be much affected, only slightly slower. But the search engine was so bad that I couldn't even use it. Just load and load, never go forward and never to expire. & While I was slightly fast internet from comcast.

  Now with my new internet provider.
  The search engine is fast again. But the minihp, (nate.com) index and links like these don't work anymore.

  http://Minihp.Cyworld.com/PIMs/main/pims_main.asp?tid=24235182
  http://Cyworld.com/_mjstyle

  Or whatever it is connected with them or have nate.com in it.
  Only one that loads with nate.com is the search engine that is as follows.
  http://mm.search.Nate.com/search/video.html?z=VD&s=&TQ=&q=%BF%ad+%B8%B0+%C0%BD+%be%C7+%C8%B8+m.c+the+Max

  Even more bizarre is like when I go to a proxy, which I was just testing. In fact, it loads the site. Some slow, some, as if I typed yahoo.com... like quickly. I couldn't just click on the next page buttons.

  This site has a proxy I used.
  http://myjobtool.info/
  It is one that has been fast measured.

  I don't understand why in all it can load into proxy, but not on my pc. Not like the session timeout thingie... COS barely, it took 2 minutes to load.

  It is not my browser, cos I tried in different browsers. So same thing.
  I tried to download some of the free internet speed increases, firefox addons and pc speed ups. Still nothing. I even tried to install stuff like... give your session in firefox as long to laod for slow sites. & a proxy for firefox. (the proxy would not accept the URL... that was so useless)

  Even more strange is that when I got my new internet. Everything about this great site loaded fast. So it's not like the internet too slow for it... COS it was freakin two days ago work!

  It was my favorite site and I used a lot.

  -Now

  So I googled around, several times and eventually find something.

  Here, this site is for my problem
  http://www.AOTA.NET/Server_Performance/sitedown.PHP4

  Then, how should I do?

  Uhm, lol

  Now his work.
  I don't understand, given how when I couldn't stay connected my friends could.

  But happy.
  Thanks for your reply.

• Problem with Vista updates

  There are similar problems, but my mobile repeat me it configures windows updates 3 / 3 and wrote 0% complete, then it stops and starts again only to say the same thing. I can't even start button for system configurations. Please notify. Could this be a virus or something with windows

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista problem: blue screen, Reboot, repeat

  Hello

  I'm desperate for some help with my laptop Gateway W340UI with Windows Vista.

  Ther last time I used it was last night while I played the Sims 2, and now it will not start.

  How it happens is that Windows error recovery starts and tells me that Windows has not started and that a recent hardware or software could be the cause. He told me that I can start with the Mode without failure safe mode with networking, Safe Mode with command prompt, last good known Configuration (Advanced) and start Windows normally. (I already tried all these and none of them work.) The loading bar appears indicating that its commissioning and then I get a blue screen that flashes quickly and so I can't read, and then the computer restarts.

  Someone please help I can't live without my cell phone.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with Vista update 02/02/2010

  Looking for help, installed windows update this week and after a reboot vista wouldn't start, just a screen empty. Started in safe mode, did a scan, found nothing. Restore system before the update 01/02/2010, problem solved, but now I'm afraid to update. Any ideas? Thank you.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 not stopped, why? With Vista and XP had no problem.

  Windows 7 not stopped, why? With Vista and XP had no problem.

  What can I do for her?

  Since I have Win7 on my pc does not more fully. All fans are
  turned on and the only way to stop it and hold the button for more information
  4 seconds.

  Can you help me?

  Thank you very much!

  Help!

  motherboard:Asus M2N - MX SE Plus (2 PCI, 1 PCI-E x 16, 2 DDR2 DIMM, Audio, Video, LAN)

  Life will be better

  I tried all the options, they are not working until I have to get into the BIOS and change the option to "Enable" APIC, save and reboot...
  My good computer shutdown!

  Please try to change the BIOS APIC option and find out for yourself on your computer!