My windows always reboot with driver_violation problem

Similar Questions

• After restarting windows and then no error in config/system is finally windows starts successfully with no problems quo. __

  "windows couldnot start because the following file is missing" c:/windows/system32/config/system.
  This message appears at the first start, but when I press ctrl + Alt + Delete, restart windows and then no error in config/system does finally come windows starts successfully without problem usually. I searched on the internet that all solutions are given if windows XP does not start. But in my case after restart only a single window loads successfully. I'm dubious before using the recovery console.
  Please help everyone,
  no case I found the solution to this particular problem.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).

  These can cause corruption in the file system that must be fixed before you do anything else. If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  
  Never, never, never start with the support engineer technical 'expert' who are hired by Microsoft to implement the KB307545.  You are likely to be in for a frustrating waste of time and might just make things worse.

  Always, always, always start with a chkdsk with first error correction.

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so corruption of file system must be fixed first using the XP chkdsk program and run chkdsk can solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable CD from the Console of the Recovery XP (no XP media required).

  A CD of XP Recovery Console is not the same as the recovery disks that may have come to a store to purchase the system.

  If you have any bootable CD to run the XP Recovery Console or that you are not sure what type of bootable CD you have, can create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  If you need instructions to create a bootable XP Recovery CD of Console, we can predict that too (just ask).

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the Recovery Console and restart the computer and the report with your progress.

• Strange rebooting with w530 problem

  I have my W530 for about 6 months and there was a little annoying problems early. I also have a T510 who has more than three years and they both the same OS (Windows 7) and the same brouser (Firefox 30) and AV (Norton Internet Security) software function. And yet, while the T510 always perfectly executed, the W530 hesitates and quivered for five to ten seconds when I click on the close button. Not a major, but quite annoying problem. On the other hand, the T510 closes very easily, immediately past the on-screen "Shutting down...". ».

  But it's not the worst. Worse than it is this constant stopping and hesitant as I type, as is happening now as tape this message... The cursor stops flashing for a few seconds and I have to wait until it is once again back alive... The same question is repeated in many other situations, like when I use the wheel in my mouse to go to the top or the bottom of the page, or when I try to move the cursor to the right of any page. This apparent interruption happens every few seconds as, say m, 12 to 15 seconds, which is a great nuisance.

  It can be the cause of this behavior of starnge? As I said, my T510 running the exact same software and none of these issues.

  Thanks in advance for any ideas.

  Hi legras,.

  Welcome to Lenovo Community!

  According to your request, we understand that you are facing problem with suspended frequently on ThinkPad W530 system.

  To resolve the issue please check with update all the driver for your system or application of ThinkVantage system update to download and install it. This kind of problem occurs with pilots or if there is a bad sector on the HARD drive.

  After installation, run the application so that it will look for all the required application and the driver for your system, and it will update.

  If the issue continues after updating the app, please check with the Lenovo diagnostic tool to check if there is any problem with the HARD drive or memory.

  Here is the link to access the download page and download the latest application accordingly, please click 'Select Product' and in 'FAST LANE' enter the MTM don't. Select the exact model.

  http://support.Lenovo.com/en_US/downloads/default.page#

  I hope this helps.

  Best regards

• HP Officejet 7410 / Windows 7 - reboot cell phone problems

  I have a new HP Pavilion dv7 laptop with Windows 7 Home Premium operating system.  I was able to connect to my HP Officejet 7410 All in French - one by downloading the Windows 7 compatible driverand software from the HP website.  It worked fine for 5 months.  Now, every time I turned off my laptop and restart it, the HP Officejet 7410 does not work.  I uninstall and reinstall the driver and the software after each reboot.  How can I solve this problem?  Help, please.  This uninstall/reinstall takes a bit of time.

  Here is another page, this one is for McAfee 9.0.

• reboot with Vista problems

  We experienced the blue screen of death several times on our computer so we have removed the partition that was there. The computer ran fine for a few days, but crashed during a Skype conversation. Now, can't do a reboot. We wanted to use our Vista installation disk to help restart, but can not find. We have only the support of disk with the liscense on that code.

  What is my best option at this point to get Vista running again?

  Hello

  like you've lost your vista disc read this;

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  and take a look through this google info how to uninstall grub from linux

  http://www.Google.com/search?hl=en&SA=X&EI=ItmcTcbAM4yevQOrtLDkBg&ved=0CBUQvwUoAQ&q=how+to+remove+grub&spell=1

• Windows 2008 R2 with audio problems - No Audio output device detected

  We are always on the 4.0 update 3 and will move to 5.1 here in the coming months, but we are testing a new environment of Citrix xenapp on 2008 R2 servers and noticed that it is not a sound card. On our 2003 32-bit servers, there was and we have audio broadcast to their thin clients, etc... The upgrade of vmware with vmware tools 5.1 9 will provide a fix for this or is this a known limit? Everyone fell on this? Thanks in advance.

  There is not its virtual card in ESX, the remote Protocol is handling that, in this case RDP/ICA/HDX.

  Linjo

• HP Deskjet 3051 a J611: help with Windows 10 drivers? Incompatibility problem?

  Hello, I had to get help with a problem with my printer HP Deskjet 3051 a J611.

  I was always able to properly scan using my printer until I installed the update for Windows 10.

  I use a Sony VAIO computer Fit portable (may 2013 model) originally shipped with Windows installed Pro 8.1.

  After I installed Windows 10 and I tried to use my scanner two weeks later (it prints very well), I can't seem to use the same program I was using before 10 Windows to use my scanner. I tried to use printing HP and doctor Scan to fix my problem, and he told me that my printer had an unknown driver error that it could not solve. I also tried to reset my laptop (and power cycling the printer) and to uninstall and reinstall the driver for my printer.

  One thing to note: I use my printer using the wireless and wired (via USB), Wi - Fi for the scanner and the printer.

  I usually use the printer function when I want things quickly, using an app on my Android phone, or otherwise, using my laptop (wireless, of course). But when it comes to use the scanner, I find it works much more quickly to use it via USB on my laptop via the Wi - Fi.

  Thank you for your help (for that).

  Sincerely,

  ~ Miguel G

  Hello
  
  Thank you for using the HP Forums.

  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?
  
  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
  
  Please download and install the software FULL of printing to HP for your operating system (Win 10) features:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050a-e-all-in-one-printer-series-j611/4311836/model/5096936#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• Driver with ATI Radeon HD 3850 AGP under Windows 7 Pro 32 bit problems

  Windows 7 Pro 32 bit reports after installation of the driver that no driver is present. There was patch drivers provided by ATI to solve these problems, but these drivers did not resolve the problems. Has anyone had success with this installation, and if so, would you please provide me with how you did this? Thank you. BTW, I did the ususal uninstall and then install, reinstalled the operating system via a facility clean and then installed the drivers, etc, etc. So far,nothing has worked. After Googling this issue I found that many others have had similar experiences with these driver problems. Now I have XP Pro and Win 7 Pro installed via dual boot and XP Pro is running pilots ok with no problems. Thank you!

  I came across the work of question three years ago on one of my machines.

  It is a problem of compatibility between the nForce 3 and AGP.  I don't remember the exact details, but with a nForce 3 and similar day SIS chipsets and a few others when they had a dual-core CPU in them, they would change the AGP port to use a PCI driver or something of this nature to enable the multi-core support (such as it's been hacked on toward the end of their development).  On Windows Vista and upward, such a workaround solution does not work.  SiS and some other published updates driver for the motherboard chipsets which he sorted, nVidia did not worth it, despite nForce 3 sold as Vista compatible.  nVidia pulled this stunt with a lot of things at the time, including their GeForce 5 cards, saying they supported Vista, same with the beta drivers and then they just canned originally.  They took both.

  It is a solution that will be the kind of work, but as you may have guessed, you will need to disable one of the cores of your CPU.

  You can do this by going to msconfig, click on the Startup tab, click Advanced... and changing the number of processors at 1.

  Reboot and your graphics drivers will spring magically to life.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet atwindowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Windows 8 pro with media center - Nvidia Geforce 8400 M G card and driver video problem or something else?

  Hi I have a problem with my Windows 8 pro with media center, my laptop has a Nvidia Geforce 8400 M G graphics card and driver crashes all the time also popups and windows menu has a black background, the only solution is a reboot, can you tell me what is a problem? Thank you

  Hi MAXUSVAN DERT.

  Glad to know that you have posted on the community of Windows 8.

  From your description, I can understand that you are unable to connect to Windows 8 pro with media center and you have a problem with installing the drivers.

  To install the drivers for Nvidia Geforce 8400 M G please follow the link below and check if the problem is resolved.
  http://www.nvidia.com/Download/index.aspx?lang=en-us.

  If the problem is not resolved, then try to install the drivers in compatibility mode.

  Follow the steps to install in compatibility mode:

  a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.
  b. check the run this program in compatibility mode for: box.
  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
  d. try to install the driver and verify.

  See also this link for compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Also try Nvidia Support - check with the support that she might be a known issue.

  http://www.nvidia.com/page/support.html.

  Hope the above information helps. If the problem is not resolved, please get back to us and we will be happy to help you.

• I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  Hello, by default the firefox session restore feature only allows you to save last 3 windows open. to change this, type on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.sessionstore.max_windows_undo. Double-click it and change its value to 4 (or more).

  http://KB.mozillazine.org/browser.sessionstore.max_windows_undo

• Firefox is not always compatible with the connection to my comcast email account. I need to clear the cache, and then I can back into my email account. Is there a way to permanently solve this problem? Thank you.

  Firefox is not always compatible with the connection to my comcast email account. I need to clear the cache, and then I am able to get back into my email account. Is there a way to permanently solve this problem? Thank you.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".
  • https://support.Mozilla.com/kb/cannot+log+in+to+websites

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package.

  Original title: I'm loading Quciktime.

  When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. "How to do this?

  Hi Tonyb13apb,

  ·         The issue is limited only during the installation of QuickTime?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Uninstall and reinstall QuickTime and check.

  http://support.Apple.com/kb/HT1925

   

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  a. click Start, select run.

  b. type msconfigand click OK.

  c. the system dialog Configuration utility appears.

  d. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

  e. When prompted, click on restart to restart the computer.

  If the problem persists, you can contact Apple support for more help and information.

  http://support.Apple.com/kb/HE57

  Let us know if it helps.

• I need a list send me Windows based utility of magnification for XP, am a MSN user with vision problems and cannot zoom in easily on what I have.

  I need a list, sent me to my XP Windows-based magnification utilities, am a user of MSN base with vision problems and cannot zoom in with what I have, and the work of the "Magnifier" somewhat well but could use something better.

  Any ideas?

  Hello

  Please refer to the links and check if it helps.

  How to set accessibility features for people who are blind or who have low vision in Windows XP

  http://support.Microsoft.com/kb/308978

   

  Windows XP accessibility tutorials

  http://www.Microsoft.com/enable/training/windowsxp/default.aspx

  Overview of the magnifying glass

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/magnify_about.mspx?mfr=true

  I hope the information is useful!

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!