Receipt monitor without furniture

Similar Questions

• move the Panel between monitors without losing data?

  I read here and here for help.  The best that I can deduct is to call SetSystemAttribute and change the ATTR_DEFAULT_MONITOR value before making a followed LoadPanel of a DisplayPanel.  Then to change the Panel of this monitor to the other, I have to call a DiscardPanel, then repeat the whole process.

  This changed with success my Panel of a second monitor.

  However, as soon as I throw the Panel, all the data control on this special group gets wiped.  So how do you change a monitor Panel to monitor without losing its data?

  According to the help:

  To open the panels on another monitor, call SetSystemAttribute to change the value of ATTR_DEFAULT_MONITOR before calling LoadPanel or DisplayPanel.

  I found is not exactly the case.  Repeat the call of the DisplayPanel just redraws the Panel.  Again, I must first close the Panel.  I tried a HidePanel instead, but it does not work.

  My group, I have a table of data.  I need it to stay resident while lighting the Panel between monitors.  Ideas?

  ElectroLund ha scritto:

  I think I'll just save me every row in the table and populates the table again after reloading of the Panel.

  It might be faster to duplicate control on a hidden side and duplicate and then again on the new main panel.

  (It is not an idea of mine: Luis gave him here)

• Satellite A100 - configuration of the monitor without software

  I need help!

  I almost tried to configure my monitor, but I don't understand.
  I am a passionate photographer, that's why I need to make a configuration of my monitor to get best results when my photos are printed.

  Does anyone know how to change the color and contrast of my monitor?
  I know there is some kind of software to make it easier, but I don't have the money to purchase some.

  Is there no alternative to the configuration without any type of software?

  Thanks a lot for your help! :-)

  Hello

  I do not know what Satellite A100 you exactly and what graphics card is integrated, but please check advanced display settings. There you can find different settings and also with the color settings tab.

• Lenovo T430 with intel graphic card can support two monitors without a dock?

  I want to use my current T430 to connect two external monitors. I can do without a dock?

  If you do not use the internal LCD screen, you can connect the two LCD external using the vga + mini Displayport connector.

• How to turn off the LCD on my T420i screen/monitor without spin mode sleep?

  I have been using an Ideapad Y450 before this T420i. I love the Fn + F2 shortcut that I turn off the screen without turning to the mode "sleep" or sth like that. It still works as awaken, only the monitor is off, it is still continue to play the music or to continue the download. The display should be activated by moving the mouse or type on the keyboard, but only when you click Fn + F2 again. How can I do that on this new computer? T420i? Or is it not possitive to do? I really want to be able to turn off the screen without turning off or turning to sleep.

  On my T400, I can choose Fn + F3 settings, press the combination to see if you have this:

  

  

  Once you set it to "Turning the display off", in the future, you would be able to quickly shut down.

• I'm trying to plug in an external monitor without success. I'm getting a signal on the screen again that there is no signal. What I'm doing wrong?

  I tried to connect another monitor using a connections of type d with an audio input jack separate pins. I have no video or sound on the new monitor even when I select the pc on the screen input.  I'm trying to hook up a monitor from 42 "to my laptop, so I can stream videos.  ANY IDEAS WOULD BE APPRECIATED CONTACT ME AT * address email is removed from the privacy * or * address email is removed from the privacy * Thank YOU

  Hello

  I suggest you to consult the following Microsoft article and check if it helps.

  Understand multiple monitors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  Add a second monitor:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-second-monitor

  Change the display settings on multiple monitors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

  For more information, see the following Microsoft article.

  Solving the multiple monitor problems:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  Multiple monitors: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Hope the information is useful.

• Tecra S5: No. 1920 x 1200 and 1680 x 1050 support on external monitors?

  Hello

  I have a Tecra S5 with nVidia Quadro NVS 130 M (512 MB)
  Officially, according to Toshiba, the external monitor plug is:
  + Max resolution: 2 048 x 1 536 +.
  + maximum refresh rate: 100 Hz +.
  + resolution not interlaced with a maximum refresh rate: 1920 x 1 200 +.

  I try to work with 2 different external monitors without success.

  First of all, I had a Samsung 245 b, 24 "(1920 x 1200). I have install the driver of Samsung, but the resolution was not supported. I also tried the forceWare laptop2go.com, but again no luck.
  So, I change my monitor and bought a Samsung 2243NW 22 ", 1680 x 1050. This resolution is the same with the native resolution of Tecra. I thought that this resolution could be supported. But still no luck. I could change the 1400 x 1050 or 1600 x 1200 resolution, but not the 1680 x 1050.

  There we really pity that Toshiba support 1920 x 1200 and 1680 x 1050 resolutions. Most of our days the monitors use these.

  Any help will be greatly appreciated.

  Thank you for your time

  Hello

  You first need to check if your graphics card would support such a resolution on external monitor.
  The user must provide all the details.
  If the card doesn t supports you the preferred resolution and then there is nothing to see.

  If the GPU can handle such external resolution then you should check if the graphics driver would also support such a resolution. The fact is that even if the graphics card, would support the external resolution, that you will not be able to choose if the graphics driver supports doesn t.

  As you can see that several factors are important

  Welcome them

• Satellite A500 - 1C0 - Bluetooth monitor does not start

  Hello
  I noticed that a new Bluetooth monitor was released for my Satellite A500 - 1 c 0 and so I tried to use it.

  First, I downloaded the Bluetooth stack and Bluetooth screen and install it. As soon as I restarted my computer loaded Windows system default Bluetooth service. I tried to manually start the monitor installed, so I tried a Bluetooth Monitor and it came, but nothing happened. Ultimately the only way to get the old dos application had to use system restore. When I restored it to the previous system I just installed Bluetooth Monitor without installing Bluetooth Stack, and there it is again. I only use Windows Bluetooth utility.

  How can I disable the utility and use Bluetooth Monitor from Toshiba or I can do it by default? It does not even start.

  Thank you
  Stefanos Constantinou

  Hello

  You can post information please?

  What operating system you use and that you have installed Windows recovery disk or Microsoft?

• Portege R600 - how to use the external monitor on the docking automatically

  Hi - I just got a new Portege; R600-102. It's a great machine - very light and fast.

  I connect to a Slim port replicator to the office and I wish I could anchor and automatically use the external monitor without opening the laptop. Can someone point me in the right direction on how to do it? This process has worked well on my recently retired Dell X 300.

  More precisely:
  # I have the laptop closed Portégé and standby mode
  # I anchor in the Slim Port Replicator (SPR)
  # I press the button 'on' on the SPR
  # I see the message "recovery windows" and the bars of the countdown on the external monitor. (So I know it's connected and you can see the external monitor)
  # The laptop turns on but use the laptop screen (private) LCD
  # I have to open it and manually tell it 'out to watch.
  What can be automatically?

  Thanks for the tips.

  Post edited by: ExDirectory

  Hello

  You use Windows XP Home or Vista edition?

• Portege M800: No image on the external monitor

  Hello
  Today, I tried to connect my PC laptop Toshiba M800 to another CRT monitor without success.

  I use the Fn + F5 keys, but nothing happens, I mean a small window opens which shows me the options LCD, LCD + CRT, CRT, LCD + TV etc, but nothing happens when I choose CRT or LCD + CRT.
  I use a VGA cable, it's ok because the same monitor and the same cable works fine when I use my Acer laptop.

  I even downloaded the latest display driver Intel and the last updated of the BIOS, but there still nothing...
  All ideas will be welcome. :)

  It's very strange.
  What is your laptop preinstalled with original Toshiba recovery image?
  What operating system do you use?

• HP ENVY 700-010xt CTO desktop: two monitors

  Currently I have one W2371d monitor connected to my computer. I have now bought a second monitor of the same type. Should how to tie the 2nd montor, I use Display Port or HDMI port? The computer seems to have a DVI, HDMI and display Port. The 1st monitor is attached to the DVI using a VGA to DVI adapter.

  The Office has a videocard of NVIDIA Geoforce GT 640.

  You are welcome.

  If there is a port DVI - D on your second monitor without adapter cable is certainly the way to go.

  StarTech equipped of a USB 3.0 video adapter.  You can use their Live Chat option to talk to one of their technicians.  In fact, they will be able to tell you which is your best option.  However, all of the options you mentioned would work.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Tecra M5: How auto to activate the secondary monitor?

  Hello

  When I my Tecra M5 with full-screen dock and turn it on, I would like that it allows to automatically activate the secondary monitor and set it on the primary monitor. Currently, when home he doesn't - and I have to manually enable the second monitor and place it in the primary.

  Any ideas?

  Thank you
  Fraser

  Hi Fraser

  As far as I know it of not possible to set the external monitor as the main screen on startup.
  But what the graphics card is installed on your laptop?
  On the Toshiba site I found a new version of the Intel display driver.
  But is it possible to automatically activate the external display and set it to the main monitor without using the docking station?

• Aero off when the external monitor is turned by Nvidia ControlPanel

  Please see subject
  Aero works perfectly when the office is developed for the 2nd monitor in normal mode.
  no work around?

  Post edited by: mhoffmann

  Sorry, I forgot to mention my hw: Satellite a100-02 b (geforce go 7600)

  .. and when I reboot Vista behaves a little bit strange.
  a few seconds, everything looks ok, but then it redefines the external monitor to 16-bit color and minimum Vfrequency (60 HZ)
  and a message appears that the 'Desktop Manager' was closed due to a problem.

  Maybe it's because...
  (1) it is an old CRT, not especially known (standard pnp driver)?
  (2) the ability of the graphics card vista is not sufficient in this configuration?

  I heard somewhere that there is a switch in the registry, which disables the dwm.exe test, if the material is
  able to support the aero technologies. What is a way to fix it?

  Hello

  I read about the registry hack that allows the function Aero Vista on graphics cards that are generally not able to manage the Aero feature.
  But I don t think that the modified registry key might help with this problem!

  In any case, I try to understand what you were doing on the laptop
  You have turned on the display on the second external monitor, then you have changed the position of the screen (you turn the display) and you tried to use the Aero on the external monitor.
  Am I wrong?

  Well, what to say, it s not easy to say if she s a problem or just a limitation of Vista Aero.
  I have never tested or used Aero after the display has been set at another position.

  I think you should test Aero on external monitor without rotation.
  Please also see this Toshiba knowledge base article on

  What are the requirements of Aero in Windows Vista?
  http://support.toshiba-tro.de/KB0/TSB7101O90002R01.htm

• HP Compaq and Dell Analog monitor compatible?

  I wanted to add that I also tried to pass the power to the monitor, computer cords and also VGA cables and nothing has helped so far.  I always get the saving mode on my Dell e193fp analog monitor.  My Hp compaq 5750 is loading windows xp, and I hear music... just no activity of the screen except "power saving mode hit any key or move the mouse.  Two of these units have not been used in a while, the office and the monitor have been inactive for more than 6 months.  If I disconnect the vga monitor, the power button cable transforms whenm amber green verses he is hung up to the red, white, gree, box blue 'self test' floats on the monitor.  I am unable to get one of the buttons before you take me to a menu on the monitor or the other.

  lalea878 wrote:
  

  I have it connect to the VGA port on the back of the HP compaq dc5750 Small Form Factor desktop computer... 15-pin.  The dell monitor has only a port... No. vga other ports except for power on the dell monitor.  HP compaq SN # {removed privacy}.  I've never hung a monitor up to a video card and didn't know that I could plug the monitor directly into the card?  I know not where the map is I have opened the HP and do not see it, but am not familiar with it.  This unit has a video card?  If so, how can I connect Dell e193fp monitor without using the VGA port?  Maybe the VGA port is disabled because my acer does not work on this HP compaq but works on my other HP compaq dc5750 SN #{removed privacy} / windows 7.

  THX

  Laura

  Connection cable vga card screen depends on whther or not your PC is configured with a video card. It is not necessary to open the PC. Just look at the back of the PC. If there is a card, it will be in one of the slots instead of the bottom basket I/O headers (as in the picture in my previous post).

  Test the display on another PC or laptop to test the display and cable. This is the method of troubleshoting simpleest. If it doesn't, then the problem is with the display or vga cable.

• W530: How to connect 4 external screens without USB DOC

  I want to connect multi monitors without USB - DOC.

  Is this OK as follows?

  1. change the type of connector of the Mini-affichage port to display the port.

  2. "port to port adapter display dual display ' connect.

  3. at each port, more "Display port for port adapter dual display ' connect...

  Please tell me the solution.

  Thank you.

  This configuration will not work.

  You need a workstation series 3 dock with 2 sets of DP ports.

  Need you a separator of RFP for each of the DP ports on the dock.