Receive errors STOP 0x0000007B INACCESSABLE_BOOT_DEVICE and blue screen error.

Similar Questions

• Satellite M40X-169 when it is connected to the wireless device stop with restarts and blue screen

  Hello.

  I had the problem with my laptop when I connect and get connected to the wireless network. My laptop stops with the Blue error screen, then restarts.

  Maybe you can help me solve this problem, because I can't work normally when I need to be connected.

  Plaese help me.

  Hello

  It is not easy to give you a precise answer, but try to remove WLAN card from Device Manager, and then restart the device. You can also check the Toshiba download page and try to install the latest driver for the WLAN card.

• HP elite e9160f had compatible windows error/process stop notice and blue screen freezes.

  HP e9160f Vista Home Premium running is compatible notice of error switch Windows and blue screen freezes.  Any suggestions?

  I went ahead and ran the HP disks to reset to the factory settings and loaded Windows 7.  No problems now!  Thank you for your help and persistence.

• Satellite A500 - crackling sounds and blue screen

  Hey everybody.

  I bought a laptop Toshiba Satellite A500-19w about 4 days ago (today it is Sunday, March 7, 2010).

  I had the sounds of crackling of my speakers which have been mentioned so many times in the forums, no real solution.
  I also experienced the crash of the blue screen, that's already happened 7 times while I was not strongly using my newly buy laptop.
  I'm not looking for a repair or a replacement, because I find it quite unacceptable to have to think about the errors, faults & fixes as much as the laptop is brand new.

  What I want is a refund, but I'm not sure on how to do it.

  I know that Toshiba has some sort of refund policy, but if someone can tell me exactly how it works, because I want to get rid of my laptop as soon as possible (I will not buy any more portable Toshiba, especially since I had some similar problems with my Qosmio f30).
  If someone can give me some guidance, because I don't want to be mocked or used and cheated out of refund.
  I bought my Toshiba in the Middle East (perhaps refund policies are different here).
  Thank you.

  Post edited by: mihran

  Hi mihran.

  If you want to pay off your laptop, you should talk with your computer store where you bought it. Only the can repay your laptop and not Toshiba directly.
  Of course it is also depending on the country where you life, but normally you can pay within 14 days I think. So in your case I speak with the seller or give them a call. They explain how to do this.

  But let me give you a little advice: regarding your problems with the crackling sound and blue screen I recommend that you contact an authorized service provider or ask a new A500 (this should be possible if you have only 4 days). Generally, I can say that a friend of mine has Satellite A500 and he is quite satisfied with her. This laptop has a great design equipped with new material for a good price. :)

• Cannot install windows - MEMORY_MANAGEMENT exception and blue screen

  Hello

  IM unable to install windows on my laptop computer, because whenever I try to install it, after installation there is exception MEMORY_MANAGEMENT and blue screen. It all started since a few exceptions on my previous windows which gives began several exceptions like DRIVER_IRQL_NOT_LESS_OR_EQUAL as errors and PC rebooted each time. Then I thought to install new windows and the problem started. I'll be very grateful if you look forward to my problem

  Thanks :)

  First run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  (1) If you do not know your readers make / model number AND your computer is no longer able to load Windows:
  (a) Renmove the drive of your desktop and check the label for the serial number and model.
  (b) remove the bottom cover of your laptop, remove the disc and check the label for the serial number and model.

  (2) If Windows is still usable, install 'Speccy', it provides information of the computer/system in detail on your:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test drive - create a Bootable CD:
  (or connect the drive to anther PC and install the appropriate test software)

  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.

  List the factory utilities, walk.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital disks, download the file .iso from WdDiag:
  http://support.wdc.com/product/download.asp?GroupId=613&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also try Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  = Test SSD - modified software: 24/10/14 =.

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:
  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:
  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  PNY support: http://www.pny.com/support/contact-us

  Samsung: http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/about/whitepaper07.html
  Samsung Magican review:
  http://www.TweakTown.com/articles/5638/Samsung-magician-4-2-first-look-new-SSD-Toolkit-adds-rapid-mode/index.html

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  J W Stuart: http://www.pagestart.com

• Re: Can't do and blue screen with the recovery tool

  Hello

  After I start my computer, leaving the office, but I can't do anything, everything freezes!

  I tried the recovery (with F8) tool and it starts, but after a while the bluescreen apears.

  Can someone tell me what is the problem?

  Thank you

  Hey,.

  What laptop, you have exactly and blue screen appears exactly?

  If disk HARD recovery doesn't work you should try the Toshiba Recovery disk recovery facility.

• 1000008e and blue screen errors c5

  Hi someone can help me with blue screen errors? I get them all a few days or more. I tried to update some drivers for my laptop (Dell Inspiron 1545)

  and I always do those windows when they appear.

  The two that I got today are:

  Product
  Windows

  Problem
  Stop unexpectedly

  Date
  10/01/2011 13:43

  Status
  Solution available

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini100111 - 02.dmp
  SysData. XML
  Version.txt

  Additional information about the problem
  BCCode: c5
  BCP1: 01FFE68C
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 8C12E010
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: 03ef9b1f-2a5a-45e3-b3a6-5fd007644934

  1 today:

  Product
  Windows

  Problem
  Stop unexpectedly

  Date
  10/01/2011 11:43

  Status
  Report sent

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini100111 - 01.dmp
  SysData. XML
  Version.txt

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 8 128770
  BCP3: BF7AD7FC
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: 8864aed8-7896-422f-b5d6-99e51972bfc1

  Thank you

  Gill

  Hello GMS611,

  Looking at the Dell site for the error that you specified, you have confirmed that all drivers, firmware, and BIOS are updated? Are you getting this error when you start?  I want to confirm you are updated and then run a check disk as Abdul suggested.  Please let us know status.

  Dell support:

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&CS=19&l=en&s=DHS&ServiceTag=&SystemID=INSPIRON1545&OS=WLH&OSL=en&CATID=&impid=

  Thank you

• Computer immediately freezes and blue screens. BIOS error could not be read.

  Hi bought a computer from a friend worked perfectly for them now, I plugged my old PC cables and it worked fine for like a week, then when I turned it on it just completely frozen, he told me that the specifications of the processor then instantly frozen before even that came to the sign in screen, caps lock shift etc. on the pc do not work and then it worked fine for a week and then this morning I went and I registered and it blue planned to tell me something about bios couldent read it you stop fast and now I am to plant him as soon as I turn it on, the only new material I installed was a new adapter wireless a few days ago , but the problem started before that, any help you can give would be great, thanks.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

• Error on kernel stack inpage error and blue screen

  (Note: this post was created on behalf of another user.)

  Recently, my PC had blue screen errors.  Thinking it was probably a problem of aging HD, the HD has been replaced and a new install of Win XP Home Edition with Service Pack 2.  Blue screens persist despite the new drive.

  The error is a "Kernel Stack Inpage Error".

  It is a new drive with the same errors as before so I think that it is not a virus and probably a problem with another piece of hardware.  There is a minidump file available if need be.

  Can someone please help with these errors?

  Thank you.

  If you would like to get BSV and run it, then choose:

  Options, lower pane Mode, all the drivers

  You'll be on your way and see the battery and your ATI drivers.

  Updates Microsoft released the second Tuesday of each month (Patch Tuesday) so it would be on 07/12, but since you have SP2, I can't say what would happen or what updates you decided to install.  If you have accepted the recommendations of MS for video drivers (which are usually poorly), who knows what is happening.

• Receiving intermittent crashes and blue screens

  Original title: blue screen of death

  I built my computer and have intermittent crashes/blue receintly screens.

  When I boot back I get this error message:

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  More information about the problem:

  BCCode: 1a

  BCP1: 0000000000041201

  BCP2: FFFFF68000007000

  BCP3: 95A000300E17F847

  BCP4: FFFFFA80043101A0

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 256_1

  He tells me to check the for more info .dmp file, but I can't open the file.

  Hello

  For information on using BlueScreenView and MyEventViewer to troubleshoot Bluescreens see methods
  stated in this thread - top 3 responses.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -------------------------------------------------------------

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Processor	Name of the computer	Number of processors	Major version	Minor version
  090310 19983 - 01.dmp	03/09/2010-12:35:40 AM	PAGE_FAULT_IN_NONPAGED_AREA	0 x 00000050	fffffa81'80e63b3b	00000000 00000000'	fffff800'02ce75ff	00000000'00000005	Ntoskrnl.exe	Ntoskrnl.exe + 70740	NT kernel & system	Microsoft® Windows® operating system	Microsoft Corporation	x 64		4	15	7600

  Have you recently added any hardware? Have you updated any drivers just before this started? (Check
  Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
  Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
  products could be at fault as well as reader questions.

  Use the troubleshooter above for pilots and memory.

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of the installation of a faulty material or failure of
  material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently, remove it to see
  If the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run
  Diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the owner
  Manual for your computer.

  Fix a defective system service: Disable the service and confirm that this resolves the error. If so,.
  Contact the manufacturer of the system service on a possible update. If the error occurs during the system
  startup, restart your computer, and then press F8 at the menu character mode that displays the operating system
  choice. In the Windows Advanced Options menu that results, select thelast known good Configuration
  option. This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this resolves the error. If she
  is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume: Run Chkdsk /f /r to detect and repair disk errors. You must
  Restart the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check for
  problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.
  
  BCCode: 50 0 x 00000050<-- read="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Please help - Virus? Can not enable automatic updates and blue screens during the virus scan

  Hi, I think I might have a virus.  Here are the symptoms:

  • I can't activate the automatic updates
  • MS Security Essentials blue-screens in an analysis complete (I can do a quick scan)
  • I was able to run a quick scan of the Scanner for MS without problem.
  • When you open Internet Explorer I always get "stopped unexpectedly" and it gives me a choice to go to the previous page or home page
  • I have AVG Antivirus but it was blue-screening during a scan, so I uninstalled and installed MS Security Essentials
  • I ran a chkdsk /r and no errors not found on my hard drive

  I searched the internet and I tried a few suggestions, but so far I have not made progress.

  I am running XP SP3 and I don't remember disabling the automatic updates.

  I am open to any suggestions, just some guidelines at this stage.

  Hello

  ·         What exactly happens when you try to activate the automatic update?

  ·         You receive no error message from error code?

  I suggest to reset the Windows Update components and check if the problem persists. Visit the following link and click on Fixit.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

  http://support.Microsoft.com/kb/916261

   

  Note: The article also applies to Windows XP service pack 3.

  Let us know if it helps.

• STOP: 0 x 00000050 blue screen/not turning on

  Hello

  Yesterday I updated my computer with 4 or 5 updates automatic and little time after the screen flashed blue then the computer restarted before I could see what he says. It restarts successfully but later same updates came back to the top and it's the same thing. Today, my computer was not able to turn it on.

  A black screen appears with the start modes, but none works. I was able to open some forms of parameter with the function keys and managed to do stop at the blue screen and it says:

  STOP: 0 x 00000050 (0xF321B2C8, 0 x 0, 00000000 00000001, 0xBF88784B) downstairs

  Hi master bri.

  If you are able to start your computer in safe mode, and thenrestore the computer and check the result.

  Once you have started the computer successfully, install the update that is mentioned in the following article.
  See You receive an error message "Stop 0 x 00000050 ' when you restart a Windows XP-based computer

  If nothing works, then repair install XP. Try these steps to repair install Windows XP:
  a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
  b. on the "Welcome" screen, press ENTER to start the installation of Windows.
  c. accept the license agreement and Windows will search for existing installations of Windows.
  d. Select the XP installation you want to repair in the list, press R to start the repair.
  e. the installation program copies the necessary files to the hard disk and restart.  Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
  f. when the installation is complete, check if Windows starts correctly.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stop the random system, blue screen.

  Hi, my computer is windows 7 64 bit. for the past few months, my computer has been stop randomly, for example, while playing games, often it works fine. However, many times my computer just freezes and produces a continuous noise of stuttering. When I try to reset, sometimes it restarts successfully, and sometimes it isn't. my computer is an Acer Predator G5910. When I try to reset, it would not produce beep sounds and the little blue light does not appear. I wanted to wait a while later to restart. the computer freezes often also when I don't do anything. for example, if I went to the bathroom and to the left of the screen nothing running home computer, it would freeze again and I have to reset. Blue screens recently have popped up but disappear too fast for me see whats on it.  and sometimes, my computer works perfectly well. I have no idea what still recently, we used our warranty and they said they changed everything inside the computer. It is one of the technical information, I received in the blue screens: 0x0000001E (0xFFFFFFFFC0000005, 0x0000000012DA0D60, 0xFFFFF8800F2D68C8, 0 x 0000000000000000)

  nvlddmkm.sys - address FFFFF8800F2D68C8 base at FFFFF8800F278000, DateStamp 503f8bb8.
  There was no stop code.  I would really appreciate if someone could help me in this situation. I also want to clarify that I am not a professional on computers.
  Here is the link to skydrive for the latest dump files, that I could find.
  : https://skydrive.live.com/?cid=5c4d5ca7c75785d3#cid=5C4D5CA7C75785D3&id=5C4D5CA7C75785D3%21174
  Thanks in advance!

  Hello

  We have three audits of bug:

  LEAPC_INDEX_MISMATCHERREUR (1)

  This indicates that there is an inconsistency in the index of State APC.

  This is an internal error in the kernel. This error occurs at the output of a system call. One possible cause of this bug check is when a system file or driver has a sequence do not call system to enter or leave the regions controlled or critical.

  -It is usually hardware related bug control.

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  Nom_image: material

  MODULE_NAME: material
  
  0: kd > fffff880018c7548 ln
  (fffff880'018 c 7530)   ndis! ndisOidSendToMiniportDirect + 0 x 18 |  (fffff880'018 c 7620) ndis! ndisFQueueRequestOnNext

  ^^ It seems that the exception occurred in ndis! ndisOidSendToMiniportDirect + 0 x 18.

  PAGE_FAULT_IN_NONPAGED_AREA (50)

  This indicates that invalid system memory was referenced.

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  -----------------

  1 Intel Extreme Tuning Utility - Office control - uninstall as soon as possible.

  2 make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  3. If you're still crashing after what above, run Memtest for NOT LESS than 8 ~ (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• STOP 0 x 00000050 blue screen after installing the Windows security update [Vista]

  As the title suggests, after installing an update of security on Vista, I got a blue screen on reboot. Error code 0 x 00000050. I see the suggestions of some places on the internet saying that I have to go in safe mode, but even when I try this I get the error.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Service Pack 2 the computer power off randomly creates a stop disputive. Got blue screen twice.

  I guess that the title line roughly amounts to the top of my problem. The disruptive cases started after installation of SP2 and at this point, I want to go back to SP1, how can I do this?

  Hi Orman,

  Thanks for posting on Microsoft answers Community Forums.

  To fix the error on a blue screen on your computer, you can access the link below and follow the steps:
  http://support.Microsoft.com/kb/958233

  In case you are unable to solve the problem and still want to uninstall Vista SP2, access the link below and follow the steps:
  http://support.Microsoft.com/kb/948537

  It will be useful.

  Kind regards

  Srinivas

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think