Receive the error code 80040006 try to update Windows Live

Similar Questions

• When you install an automatic update. I received the error code 652. try three times. Always code error 652. She strives to update of Miscrosoft Silverlight (KB2164913) need help.

  When you install an automatic update. I received the error code 652. Have tried three times, always the error code 652. She tries to Miscrosoft Silverlight Update. need help

  Hello

  ·        Remember to make changes to the system?

  Follow the steps mentioned below.

  Step 1:

  There may be some third-party software that runs in the background, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Step 3:

  See the article mentioned below.

  Description of the update for Silverlight: September 1, 2010

  http://support.Microsoft.com/kb/2164913

  To get help after your query in the Microsoft Silverlight Forums. Click on the link below.

  http://forums.Silverlight.NET/forums/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I received an error when I try to open Windows live Director?

  I've used it before. I try would be updated since it's broken, but the dowloade stopped at the end and says the same error

  I received this message:

  Sorry, Windows Live Movie Maker had to close unexoectedly. Please restart Windows Live Movie Maker, and then try agan. (Error 0 x 80004005)

  Hi, Liampenn

  More Windows Live programs and services have their own support forums that will be able to offer a dedicated support to your problem.
  Please visit the following link: http://www.windowslivehelp.com/product.aspx?productid=5

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried to update my cc and received the error code: A12E1

  I tried to update my cc and received the error code: A12E1

  Hi Samson,.

  Welcome to the community!

  Please perform the following steps:

  (1) restart the computer.

  (2) if the error persists, rename the OOBE in OLD OOBE folder of

  Mac: MAC HD/Library/Application Support/Adobe

  Windows: C:\Program Files (x 86) \Common Files\Adobe and

  C:\Users\ (UserName) \AppData\Local\Adobe

  3) download Creative cloud once more and try to run.

  (4) if it you is still facing a problem then Quit/end the notifier AAM address

  Windows:

  Press Ctrl Alt Del

  Start the Task Manager

  Click on the "processes" tab and check if you have AAMNotifier running

  If Yes, click end task

  Mac:

  Go to Spotlight (magnifying glass at the top right on your screen)

  Type activity monitor

  Press ENTER to open the activity monitor

  Check in activity for AAMNotifier monitor

  Leave this process if you find

  Thank you!

  Ankit

• Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading?

  Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading? Tried to look at the code but nothing helped. Any suggestions?

  You can watch the following article to see if this will help with the error 80070643.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643>

  UTC/GMT is 15:50 on Sunday, August 19, 2012

• I'm very frustrated with Windows Update after receiving the error code 80070005

  After receiving the error code 80070005 for these last months.  I tried several suggested corrections but have not been able to get updates either.  My operating system is Vista Ultimate 32-Bit Windows operating system and have service pack 2 installed.  any help would be appreciated

  Hello

  As I said that it is a very difficult issue to resolve.

  Did you use all of these methods, including the last link to the other thread?

  If you have used all then possibly an InPlace upgrade/repair Installation might
  help that allows to maintain the programs and data backups although redundant
  are always a good idea.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =====================================

  If nothing works then, you can use BING or Google and search for all types of suggestions
  many whom will be totally false.

  Perhaps the best choice is a new installation. You can use copy and paste to the backup
  the data on CD, DVD, or USB drives.

  I hope this helps.

• I got the error code 646 on uninstalled updates. Does anyone know what this means?

  What is called NVIDIA GeForce 8300GS tried to install something on my computer yesterday.   He ruined my size and audacity of things on my computer.   When I am gone to see if it was of Micorsoft I discovered that I'm not getting their fixes is installed on my computer since May.   I got an error code today for 3 correct code 646 was, but I don't know what that means?   Is that what someone else has this problem and is there a solution for this?

  Vicki M

  Screen resolution:

  ·

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Error 646:

  http://support.Microsoft.com/kb/2258121/en-AU

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• I can't install Service Pak 2 for Windows Vista. I received the error code 0 x 80070490, which has a link on the home page, but it is not working properly and it took me nowhere. Help!?

  Install Windows Vista Service Pak 2 upgrade

  I received the error code 0 x 80070490, which has a link on the home page, but it is not working properly and it took me nowhere.

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Receive the error code 646__in installation KB973709, KB972581 KB 974234

  Receive the error code 646

  in the installation of KB973709
  KB972581
  KB974234

  OK... I had the same problem with the download of the 2007 Microsoft security updates. When I tried to install updates, I receive error 646. I finally solved my problem by going to the Download Center on Microsoft and I install manually.

  Here are the steps that I took... which I think should work:

  (1) go to the Microsoft Download Center: http://www.microsoft.com/downloads/en/default.aspx
  (2) look for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB974234)
  3) click on the link for the download and then click on download and run. I think you have to accept an agreement, then click on continue or OK
  4) repeat for all downloads that you can not install
  (5) run Microsoft Update new and click search the updates and if updates have been installed successfully, they should no longer appear in the updates that must be installed.

  I don't know if it is not relevant or if it helped me succeed to install updates manually, but before I manually installed my updates I followed the instructions David_O posted under this thread http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f3390e74-9961-4aae-8a05-554c1a9cf1a2?prof=required&lc=1033 . I suggest that first of all try to download manually by following my directions. If it does not, then it's a possibility instructions of David resolved an issue that allowed me to download them manually disable Microsoft downloads site.

  I can't believe all the research and the suggestions of the technicians did not work... sometimes your own research is the best!

  I hope this helps! Good luck!

• I get the error code 8007005 when downloading updated 951847

  I get the error code 8007005 when downloading update 951847. It produces about 60-70% of fact. I tried a few times and still nothing. I have an Acer Aspire M5620 running Windows Vista hope first Edition, SP1. I use the automatic updates. I tried following the instructions on changing permissions, but I do not have the same path as in the answers here. He said that this is an important security update. Any help appreciated.
  I tried to use Mr. FixIt and he could not run the error code giving 2838

  Hello Redbiker_co,

  Method 1: -.
  Please download Windows Installer CleanUp utility from the link, below
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  After installation, run the tools by clicking Start--> Programs--> Windows Clean up.
  On the inside of the window, you will see different installed versions of the .NET Framework. You should choose & Remove only that versions of the .NET Framework, that fails to deploy every time-for which you receive error code. (i.e. you should only remove .NET Framework 3.5 & its application solutions packs)

  Then, restart your computer and manually install the following updates in the order
  (1) package Microsoft .NET Framework 3.5 from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en

  (2) Microsoft .NET Framework 3.5 Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ab99342f-5d1a-413D-8319-81da479ab0d7&displaylang=en

  (3) now, download the KB951847 patch manually.

  Method 2: -.
  Error code: 8007005 means of problems with permissions. Please perform the procedure below

  Run cmd.exe with administrative previlliges (right click on this file as an administrator)
  and type: secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose

  Now restart your computer & try to visit the Web site updated Microsoft or try to download the file manually from the link below

  If no help verify the steps using the link below
  http://update.Microsoft.com/microsoftupdate/v6/showarticle.aspx?articleid=13&ln=en

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  --

• Receive the error code 80070002 when installing CrashPlan?

  I have a backup of my files (CrashPlan) service on a MacBook. I was trying to download and install the same service on my Windows 7 Desktop, I get the message displayed in the image below:

  http://i.imgur.com/iIBoy2E.jpg

  I studied the error code and found this: http://windows.microsoft.com/en-us/windows/windows-update-error-80070002#1TC=windows-7

  I followed the steps, even if the error I received was not as a result of an attempt to update Windows. Restarted my computer later and I tried to re - install CrashPlan. Still did not work.

  I'd appreciate any comments on this page or anything else I could do. I already contacted the company to see if it was what they could do on this subject, but I think it might be a problem with my computer?

  Thank you.

  Hello

  Sorry for the delay in responding.

  You can try to run the game in compatibility mode and check if the problem persists.

  Compatibility mode runs the program using settings from a previous version of Windows.

  Make older programs run in this version of Windows: http://windows.microsoft.com/en-us/windows7/make-older-programs-run-in-this-version-of-windows

  Keep us in the loop to help you further.

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can't send or receive emails using Windows Live Mail. Receive the error code 4402. I can send and receive email on my hotmail account.

  I can't send or receive emails from Windows Live Mail. Receive the error code 4402. I can send and receive emails from my Windows Live hotmail account. In Windows Live Mail, it also says my server is an http / imap server. Can it be replaced by a pop3 server, so, how? Thank you

  Well, took me a few hours and without the help of a person (TIP!), I've fixed it. Remove the live mail client account and re-apply / restore the account. Solves what seems to be a sync error. -19 October 2011

• Error code 204 trying to download CC on new laptop (2nd computer) it will not download and receive the error code 204. I tried turn off anti-virus and firewall and get the same error code. How do we install CC?

  Error code 204 trying to download CC on new laptop (2nd computer) it will not download and receive the error code 204. I tried turn off anti-virus and firewall and get the same error code. How do we install CC?

  Please ignore. I disabled the anti-malware and the app is trying to install.

  Thank you

• "VMware converter-all-4.3.0 - 292238.exe NetBSD conversion starts do not/vmware-sysinfo - lin32.sh" received the error code (2) result:. / vmware-sysinfo-lin32: 1: syntax error: "(" unexpected

  Someone at - it successfully converted NetBSD? Thank you.

  Need to VMWARE Converter: Support for NetBSD 3.0 and later, please. I get the below error

  VMware Converter Standalone GUI show me this message: failed to query the source of linux computer

  = vmware-converter-worker - 5.log =.

  [#3] [2011-02-02 09:23:15.300 03084 info "App"] Results of the query to the host 172.30.2.48
  [#3] [2011-02-02 09:23:20.494 03084 error "App"] [Converter Agent SysinfoQuery] while trying to run "C:\Program VMware vCenter Converter Standalone\plink.exe - noprompt - stdin - Pei 22 [email protected] cd nokeycheck /tmp/.vmware-sysinfo-udhrkaaejqfyrfgf/;.» "/ vmware-sysinfo - lin32.sh" received the error code (2) result:. / vmware-sysinfo-lin32: 1: syntax error: "(" unexpected
  [#3]
  [#3] [2011-02-02 09:23:20.494 03084 error "App"] [Converter Agent SysinfoQuery] received an error code (2) of the ssh client which is dealt with later
  [#3] [2011-02-02 09:23:20.494 03084 error "App"] [Converter Agent SysinfoQuery] vmware-sysinfo execution failed; return code: 2; result:. / vmware-sysinfo-lin32: 1: syntax error: "(" unexpected
  [#3]
  [#3] [2011-02-02 09:23:20.494 03084 error "App"] [Converter Agent SysinfoQuery] Query(): Took exception, cleanup before you bail out ([converter Agent SysinfoQuery] implementation of vmware-sysinfo failed; return code: 2; result:. / vmware-sysinfo-lin32: 1: syntax error: "(" unexpected)
  [#3] )
  [#3] [2011-02-02 09:23:21.296 03084 error "App"] [Converter Agent SysinfoQuery] while trying to run "C:\Program VMware vCenter Converter Standalone\plink.exe - noprompt - stdin - Pei 22 [email protected] cat /tmp/.vmware-sysinfo-udhrkaaejqfyrfgf/vmware-sysinfo.log nokeycheck" received the error code (1) result: Cat: /tmp/.vmware-sysinfo-udhrkaaejqfyrfgf/vmware-sysinfo.log: no such file or directory
  [#3]
  [#3] [2011-02-02 09:23:21.296 03084 error "App"] [Converter Agent SysinfoQuery] received an error code (1) of the ssh client which is dealt with later
  [#3] [2011-02-02 09:23:21.296 03084 error "App"] Converter SysinfoQuery the Agent failed to retrieve the log file. return code: 1; result: Cat: /tmp/.vmware-sysinfo-udhrkaaejqfyrfgf/vmware-sysinfo.log: no such file or directory
  [#3]
  [#3] [2011-02-02 09:23:21.998 03084 error "App"] SysInfo query failed with error [converter Agent SysinfoQuery] implementation of vmware-sysinfo failed; return code: 2; result:. / vmware-sysinfo-lin32: 1: syntax error: "(" unexpected
  [#3]
  [#3] [2011-02-02 09:23:21.998 03084 info "App"] Programmed timer cancelled, succeeds StopKeepAlive
  [#3] [2011-02-02 09:23:32.240 04928 info "App"] [Converter.Worker.DiagnosticManagerImpl] build LogBundle.

  You are using a generic NetBSD kernel?

  so I think that it is similar to the Open and FreeBSD.

  hotclone is the waste of time - it won't work.

  Use Coldclone - or dd the entire disk - write a descriptor for him then and use it as vmdk.

  In the other BSD systems I boot first time in single user mode - as everything else probably does not work.
  Can I fix fstab and etc/rc.conf if necessary

  I'm in a hurry - if you need details for dd-road let me know and I explain a bit...

  Ulli