Receive the error message"insert disc" when playing DVD
Original title: windows media DVD player
When I try to play a dvd I have message to insert a disc
Hi Richard,
The problem persists during a particular DVD playback?
Your CD or DVD drive is missing or not recognized by Windows or other programs, so you cannot play or access a CD or a DVD. This issue would have occurred after you installed, uninstalled or updated a program or you updated Windows.
Otherwise, this issue may occur if one of the following conditions is true:
- You upgrade the computer to Windows Vista or Windows 7
- You install a service pack Windows
- You install or uninstall a CD or DVD recording program
- You uninstall Microsoft Digital Image
Perform the steps from the link below and see if it works.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 ( )http://support.microsoft.com/kb/322756/)
Answer please if you have any questions.
Tags: Windows
Similar Questions
-
Original title: 0x000000f4 beginning physical memory dump
STOP: 0x000000f4 (0 x 00000003, 0x89cb3a18, 0x89cb3b8c, 0x805d29b4) beginning physical memory dump
This is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower... What do I do? Help, please...Hello
You did changes to the computer before this problem?
Step 1: Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427 -
I am running Windows 7. I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed. Also, I lost the ability to transfer MP3s to iTunes and convert them. All of the suggestions. I had a virus attack and had to wipe my hard drive, and then reinstall the programs. ITunes is since that happened. Before I could copy a file from my Olympus digital recorder and make the transfer. Now, I can not drag and click between the windows.
Thank you
Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
1. after the download is complete, select autoruns & right click on it
2. click on "extract here".
3. on the extracted files, click "autoruns" application select it & right click and click"Openorrun"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
4. what which is complete, Open or run "autoruns".
5. in the opened window, click 'all'.
6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
7 right-click & click delete & okOption (2)
Click on this link:http://www.pcerrorfixtip.com/VistaAudioLib.dll-157425.html
He helped?
-
Original title: my computer is corrupt and needs fixing!
I received calls from a person in India who said that they are Windows services centre telling me that they have received the error message saying that my computer is damaged, and they want to help me. But I have not received any error message on my screen. When I asked them how they got my number they said it's from the database of Windows. The number they gave me is 02921252715 and when I called the number of the person on the other end told me that they are a company called Windows e-solution, independent company and is not attached to Microsoft Windows. What should I do? Are these authentic calls and approved by Microsoft Windows?
Hello
Its a SCAM!
Avoid scams to phone for tech support
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspxIn the United States, you can contact the FBI, Attorney general, the police authorities and consumer
Watch groups. Arm yourself with knowledge.No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
computer. So that's the fraud or scams to get your money or worse to steal your identity.Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
phone calls to help you fix your computer
http://www.Microsoft.com/protect/fraud/phishing/msName.aspxScams and hoaxes
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3Microsoft Support Center consumer
https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1Microsoft technical support
http://support.Microsoft.com/contactus/?ws=support#TAB0Microsoft - contact technical support
http://Windows.Microsoft.com/en-us/Windows/help/contact-supportI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Receive the error message after that firewall creative cloud update changes to our network.
Receive the error message after that firewall creative cloud update changes to our network.
We have a user, who tries to update through the creative application of cloud. We tried to find what is blocked but have met a dead end.
When the cloud creative software attempts to shout that we see a connection attempt https://ops:443 / ims/token/v1
I did some research and the only reference to the IMS for Adobe, I could find was the IMSService. This seems to be an authentication service. The problem is that "ops" are not a valid domain.
This issue seems to only affect the Creative Software of clouds as I was able to update a test computer with Creative Cloud via Adobe Application Manager.
The user's system and our test system are running OS X Yosemite
Hello
Can you please check is below the links with white combination ports on your firewall. Adobe creative cloud desktop application uses these ports only.
Address Ports ccmdls.Adobe.com 443 IMS - na1.adobelogin.com 80 443 IMS - prod06.adobelogin.com 443 na1r.Services.Adobe.com 80 443 prod-rel-ffc - ccm.oobesaas.adobe.com 443 prod-rel - ffc.oobesaas.adobe.com 443 LM.licenses.adobe.com 80 443 ccmdl.Adobe.com 80 swupmf.Adobe.com 80 swupdl.Adobe.com 80 ACP.adobeoobe.com 443
interaction.Adobe.com 443
Thank you
Ashish
-
reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again. the deleted copy is missing in the trash folder too.
Unplug your backup disk, restart, and try again.
-
Prob Winmail.
Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.
Using a digital signature? Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.
Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.
Steve
-
Original title: when I try to start The Witcher Enhanced Edition 2 since the Launcher I get the error message:
witcher2. EXE - not found entry point
The procedure entry point? setfilesystem@system@fmod@@QAG?aw4fmod_result@@P6G?aw43@pbdhpaipapax2@zp6g?aw43@pax4@zp6g?aw43@44|14@zp6g?aw4 3@4|4@zp6g? aw43@paufmod_asyncreadinfo@@4@z5h@z could not be located in the dynamic link library fmodex.dll
Any suggestions... ?
Hello Nashcat,
Have you tried to run the Launcher in compatibility mode?Have you checked CDprojekt site for an update for the Enhanced Edition? Maybe they are aware of this problem? -
Receive the Error Message When you try to activate
I had a disk crash hard and after repair of the drive, I reinstalled Vista Ultimate SP2. Now when I try to activate, I get the error message that the product ID is alread in use. What should I do to reactivate my software. It's black, real retail box version with original product id always sticker glued to the box.
Hello
It is used by the earlier original installation.
Make a phone activation, ignore auto guests and brace yourself for a real person explain your situation.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
I get the error message when I try to update Java (online or offline), or uninstall old java in 1606. But only on this suburb running vista on my other two running Xp and W7 without problem, is there a known compatibility problem?
Are you access denied messages when you try to uninstall or 'you don't have privileges... "
You are comfortable with using 1) a command prompt? (2) editing the registry?
Try this:
Don't forget to back up the Windows registry before making any changes
How to back up and restore the registry in Windows XP
http://support.Microsoft.com/kb/322756
Uninstall Java
Uninstall Java
-
I am running XP Home Edition and have used the Norton Internet Security software for years. Support includes an update of the software each year when they are available. I received a message that the latest version of the software was ready to install. Well, I installed the latest version and unfortuantely, I continuely receive the following error message...
Symantec's Service infrastructure has encountered a problem and needs to close. Contact Microsoft to resolve.
Is there someone out there who has experienced this error that might be able to help?
Confused and frustrated.
Hello
Thanks for posting on Microsoft Community. I understand that you receive an error message after update Norton Internet Security on the Windows XP computer.
I apologies for the inconvenience and I it's frustrating if things do not work as expected. However no need to worry I'll be more than happy to help you.
Please help me with the little information.
(1) what is the exact full error message?
(2) is it a paid version?Is it that you use not paid version, you can use this link to delete and reinstall Norton Internet Security.
You can meet with the screen shot to help you better.
Reference: how i: post a screen shot on this forum?
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053Until you, you can also post the your query in the Forums of the Norton Support to improve assistance.
http://community.Norton.com/Response with more information to help you.
-
First post: I have a hp Envy 4-1030us ultrabook comes with windows 7. from 3 months (after about 1 year of use), he started having the BSOD (blue screen of death) to STOP the messages of error 0x0000007e constantly interrupting sessions. factory reset which has worked for 2 months but started to do it again. tried the factory reset again, but now he makes mistakes BSOD after 2-10 minutes of use. I was so fed up that I had a new OEM DVD of windows 8 and try to start it from the external DVD player connected via USB (laptop doesn't have a DVD player in itself). When I get to the custom installation, without partitions or drives are listed and the error message 'we could not find all the readers'. Since it is an ultrabook there is a 32 GB SSD and a 500 GB HARD drive. in windows 7, these discs are seen without problem. What I am doing wrong? Why install it windows 8 can't see the internal drives? Thanks in advance for any help you can give.
Hello
See the links below:
http://www.eightforums.com/tutorials/9573-SATA-driver-load-Windows-8-Setup.html
-
Original title: The system has recovered from a serious error-
The system has recovered from a serious error-
When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.
What is the solution for this?
Hi Sandeep,
Thanks for posting your question in the Microsoft Community forum.It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.I may need a few more details to better understand the issue.Method 1: I suggest following the steps listed in the article and check if it works.Error message: the system has recovered from a serious problemMethod 2:
I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.You can see the article for more information:A "System has recovered from a serious error" message after every restart.Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
Receive the error referenced memory before you receive the logon prompt Windows session during the boot process. Have replaced the RAM on the computer. Windows Xp SP3.
If anyone can identify the update that they think that may be the cause of the problem, you can navigate to the uninstall folder and determine what files have been updated. If they can not start (except in the Recovery Console), you can also sort updates the date by using the dir command in the folder c:\windows (all $NtUninstall records).
Problem is who writes all updates with Patch Tuesday comes around (say... it's today!-be prepared for positions "broken Windows my computer updates" start coming!).
For example:
When you install an update, first installation makes a copy of the files he wants to replace in the $ $NtUninstallKBnnnnnn... folder.
That's why you can uninstall the update later. Running uninstall the update will sometimes remove the updated files, then copy the original return files. Sometimes uninstalling copy just the original preupdate on top of the most recent files. It can also remove some registry keys, so Windows Update do not think you have more (look at the spuninst.inf file).
Look at this update of security for example (KB950762) that updates c:\windows\system32\drivers\rmcast.sys:
If you have installed, it will create this folder:
c:\windows\$NtUninstallKB950762$
You will have the front update file c:\windows\system32\dllcache\rmcast.sys in this folder since the installation of the update makes a copy of the original file for you.
Then look at the file spuninst.txt spuninst folder and you will see what will happen if you need to uninstall the update:
DEL "c:\windows\$hf_mig$\kb950762\sp3qfe\rmcast.sys".
COPY 'C:\WINDOWS\$NtUninstallKB950762$\rmcast.sys' 'c:\windows\system32\dllcache\rmcast.sys '.
COPY 'C:\WINDOWS\$NtUninstallKB950762$\rmcast.sys' 'c:\windows\system32\drivers\rmcast.sys '.
COPY 'C:\WINDOWS\$NtUninstallKB950762$\spuninst\spuninst.txt' 'C:\WINDOWS\$NtUninstallKB950762$\spuninst\spuninst.tag '.In this case, uninstalling just copy the original file on top of the files that have been applied in the update, the spunint.inf updates registry tips and that's all.
Notice that it also replaces the file in the dllcache folder too - c:\windows\system32\drivers\rmcast.sys is one of the 3498 drop that PAM cares everything (it's number 2500 in the list). In dllcache files are backup files.
If you were to access your drivers folder and rename c:\windows\system32\drivers\rmcast.sys to rmcast.lem, almost before you can Flash the 'missing' file will be replaced with the copy in the dllcache folder and you will see this in the event log:
Event type: Information
Event source: Windows File Protection
Event category: no
Event ID: 64002
Description:
File replacement was attempted on the protected system file c:\windows\system32\drivers\rmcast.sys. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5598.It is WFP in action and this means that WFP is working!
-
I received the error message: 0x0000ffff after running the system restore
Original title: 0x0000ffffhas run the system restore and got this error code. How should I do?
Hello
could a. you give the error message as well?
b. are you try to create a system restore point or restore the computer to a previous state?c. Why do you try to restore the computer to a previous state?
We can try the following methods and check.
Method 1.
Disable the security software and then try to run the system restore and verify.Method 2.
Let us run restore the system from the command prompt and check. Follow the steps described in the article below to get there.
Start the restore of the system from a command prompt
http://Windows.Microsoft.com/en-us/Windows7/start-System-Restore-from-a-command-promptMethod 3.
I also advise to use the boot minimum troubleshooting to find the conflicting program.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135You can also consult the methods listed in the section below to learn more.
No restore points are available when you use Windows Vista, Windows 7 or Windows Server 2008 operating system in a dual-boot with an earlier Windows operating system configuration
http://support.Microsoft.com/kb/926185System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questionsI hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
How to delete photos in my profile?
When I go to "recent photos" in "change photos" in my profile, I am presented with a lot of pictures which I won't use or have available. How can I remove the unwanted?
-
I use win vista 32 bit, and for awhile, it can not be updated, just take time and nothing, why this happen and how do I fix this?
-
This change has occurred in the last 30 days, but when I open the Start Menu I can are more done right click anything and get the 'Normal' list drop-down all appear is a box and she's 'Properties' and you open the properties of the task bar. Any idea
-
What would make a driver error?
I type and it starts to Flash and then at the bottom of the screen it came with recovery window NIVDIA 296.65 stopped working clear up to now to do it again? should I update the drivers?
-
vertical streaks on LaserJet 1018 printer
How do you clean the printer LaserJet 1018 print path?