Received fax history report

Similar Questions

• OfficeJet 6700 premium print date and time on the fax history report

  Running Windows 8.1 on my OfficeJet 6700 Premium AIO H711n fails to print the date and time on the historic report of the fax.  I need this information to check the box of cylinder head of the fax the documents have been sent.

  Hello dcflorida,

  I did not the 6700 but on another machine, I had to 'reset', time and date in the printers preferences.

  If you haven't done it yet, go to Settings/preferences/time and Date on the All in One printer set up (once again if necessary).

  IF your machine does not have the time / date on the history report, it includes it in the Confirmation page?

  Here is the link to the Manual too.

• hp8625: hp8620/25 can not receive fax

  I have installed my Hp 8625 in a wireless (Ooma Linx) port that connects my phone to voip Ooma (line2)

  I am able to send faxes, but test the incoming fax, I have this error message 252 or 283

  I consulted the Ooma Ph service, they are unable to help him.  Since I am able to send faxes, I thought that the configuration is correct with the Ooma device.

  Test HPFAX 888 473 2963, the fax is sent but incoming error 283.

  Help expeditre this question.

  Thank you.

  Welcome to the community @Hpfaxkl HP

  I saw your post on fax error codes see you and I wanted you to know their meaning. See the below pictures to their definitions and try the steps recommended, you'll see to try to solve!

  

  Interpretation of the Error Codes in fax or fax history reports Communication error

  

  

• Cannot receive faxes officejet 6500 wireless

  Hello

  I suddenly have problems to receive faxes. Alone was able to cross over early today, and as I understand it, it took 8 minutes to my fax machine to connect. I get error reports saying type is "received" and result in "error 244 *.» I tried instructions support on the HP site, and those who, unfortunately, were not very useful. One thing, I thought may be useful was turning power switch on the ECM - however, it is not all the instructions to do it on my model!

  I have the HP Officejet 6500 Wireless

  model E709n

  Running Mac OS 10.7.4

  My Fax is on a separate phone line: it's a VOIP line I've had for quite some time

  Any help is greatly appreciated! Thank you!

  Take a look at the link below, you will find a resolution hopefully:

  http://support.HP.com/us-en/document/c01661987

  Let me know if you need additional assistance. I'm here to help. Thank you!

• Photosmart 7520 - unable to receive faxes

  New photosmart 7520, (Window XP) reception of fax problems. Test Fax - spent, several times report. When first installed and then received fax he stopped receiving.  Uninstalled and reinstalled, I wasn't able to scan either. Scan fine at the moment, but still not able to receive faxes. I have an answering machine on the same line, with the cord from the phone connected to the back of the printer, ext 2, and the fax cord connected to the wall outlet.

  Hi TaTToo214,

  You can send a fax?

  How many rings before answer on the printer?

  How does that compare on the answering machine?

  For a better fit, the printer must be on 6 rings and the answering machine set to 4.

  Please consult this document:

  http://support.HP.com/us-en/document/c01633010

  It's for a different model, but it has good troubleshooting procedures.

• OfficeJet Pro 8610: Cannot receive faxes

  I am able to send faxes but not receive them. I turned off in error correction, changed the fax speed to slow and auto answer enabled. None of this has worked.

  I think the problem might be the way that the printer and fax are connected. I have a cable modem and the telephone line goes directly from the modem jack. My phone service is through Comcast cable, then nothing is plugged directly into the wall jack to the phone.

  I have a phone on the same phone number, which is plugged into the upper Jack on the printer. The (phone) cord frrom the modem cable to the printer is plugged directly underneath.

  Hello @foxtail09,

  Welcome to the forums of HP.

  I understand that you Officejet Pro 8610 is unresponsive to faxes.

  I would like to help.

  Everything seems correct.

  Your phone line has a service of voice mail on this subject?

  Voicemail could be intercepted the fax before that the printer gets it.

  Run a test fax report to determine the status of fax on the printer and whether or not it is properly configured to send and receive faxes.

• Error with the received Fax

  We have a new laser jet 400 MFP all-in-one at our reception and have been very happy with it, except for a problem that we have at all times.  When we receive a fax it will recognize it and receiver say page 1, and then he began to compose the 102 and gives us an error.  Later, she will recompose the same number 102.  This happens not on each fax but at least 80% of received fax messages.  When I run the fax test report pass us the test.  When I send faxes are received as we know.  As I mentioned a few faxes come through but most of the time our machine begins numbering 102.  Thanks for your help!

  Number 102, is what is used to test the unit after Assembly.  Looks like there in the test configuration.   First thing is to disable the transmission of fax - the screen saver:

  -Press on the Fax icon

  -Press the button menu fax

  -Press on the delivery options

  -advance fax

  This parameter must be OFF.  If it is LIT, press OFF.

  Let me know if it works-

• HP Officejet Pro 6830: Receive faxes with a HP officejet pro 6830 w / answering machine

  I had an OLD officejet model that could receive faxes even if the answering machine was not connected directly to the fax machine the 6830 manual says that it must be directly connected.  My current Brother printer does NOT receive faxes because of this problem.  Anyone know if I directly connect my machine to this model (Officejet 6830) to make it work?  I won't buy it if it will not work.

  Hello @JPJ408,

  Welcome to the Forums of HP Support!

  I understand that you are looking to buy a printer all-in-one HP Officejet Pro 6830 for fax purposes. While the User Guide advise you to plug the answering machine directly on the back of the Officejet unit, it is not necessary.

  If you have a fax with an answering machine on her line, the only requirement is that the fax is set to two rings higher than the answering machine. Most of the responders are put back on 4 rings. As a result, you would set your Officejet to automatically pick up on 6 rings. In this way, when a voice is heard, you can manually respond to the call before the answering machine to pick up. If you are not home and then people can still leave messages on your answering machine. If you have a fax to come through, do not respond. The answering machine will pick up after 4 rings. At this point the fax machine "listen" on answering machine message and if fax tones are detected, the fax will take over and receive the fax.

  I hope this helps clear up any confusion.

• Can not receive faxes?

  I have HP Officejet Pro 8500 a Plus all-in-One printer, Windows 7, I can send faxes but cannot receive faxes? Can someone help me? I have a TV Brighthouse cable with telephone with answering service.

  Normally, it's something in the configuration that prevents the fax from the reception.  This document should work you through the problem.  Let me know what happens.

• HP Officejet Pro 8600 cannot receive faxes

  HP Officejet Pro 8600

  ================

  Cannot receive faxes.

  Able to send faxes.

  Have a line telephone/answering system equipment, with 4 lights.

  I send a fax to the 1-888-473-2963.

  A few minutes later my phone/answering machine equipment has started ringing 4 times, asking to leave a message.

  Then I heard the ringtone that a fax has been available and I checked the printer display. I had an option:

  "receive faxes manually.

  I pushed this option and the incoming fax was printed.

  If this case should be closed.

• I can't receive faxes on my all-in-one HP Photosmart 3100

  I recently installed Windows 7 32 bit. Now I can't receive faxes on my all-in-one HP Photosmart 3100

  Hello Travis_C,

  I managed to fix this problem in all things, read the manual. It seems that the automatic response was some how turned 'OFF' and this is why no faxes received. Thanks for your reply,

  See you soon

  BJP1

• How to configure my Mac (OSX Lion) to receive faxes directly from my HP Officejet 6500 +.

  I have a Mac OS x Lion and a HP Officejet 6500 +. I would like to save incoming faxes directly to my computer, rather than having the 6500 to print them. I installed the driver of HP6500 on Mac: print and outgoing fax jobs. Using the configuration Print & Scan on Mac System Preferences, I can select the Officejet 6500 fax, click on "receive options" and turn on "receive faxes on this computer": I got him to answer after 1 ring and save faxes to an appropriate folder.

  The problem is that the incoming faxes even print directly on the 6500 and are not registered on the computer.

  I tried following the instructions on the manual for 6500 located here: http://h10032.www1.hp.com/ctg/Manual/c02519721.pdf but the indications on page 57 for the implementation using the HP tell me to select the "applications" icon in the toolbar and it isn't here.

  Any help would be appreciated, thanks.

  Well, this got me half way there, thank you.

  Once you have installed the software which recommends ShlomiL, then you must enable the option Archive digital as described, which won't be available unless the device is physically connected via a USB cable. Wireless is not an option. The value "Digital Fax archiving" 'Save to Folder' and then choose a folder that is accessible in writing-world. The folder must be specific for incoming and used faxes for anything else! The 'Notification of incoming Fax' value to what you want.

  Then go into the front panel of the 6500 and disable printing fax. (There is an option buried under "base set up the fax / Fax HP Digital")

  Finally, create an automator workflow that automatically prints any picture of new place in the folder of incoming faxes created there are two steps. Set it to print on a printer laserjet cheap rather than ink-jet 6500 ridiculously expensive. (Or skip this step if you're ok with not having a copy of incoming faxes).

  You can ignore the options useful and well-designed integrated on your Apple about "receive faxes on this computer". HP only plays nice with that.

  I still hate the HP, but at least now I didn't spend $35 for a new inkjet cartridge every two weeks.

• OfficeJet Pro 8600 spits out a blank second page when receiving faxes

  I have a brank new Officejet Pro8600 and it's the same as my last HP all-in-one has started doing.  Even if he receives only one fax from page, it seems to read as two pages and also spits out a blank second page.

  My frustration is more, because I just replaced my last all-in-one to do the same thing.  It's a waste of paper and very boring.

  I'm happy that I got this sent to me, because I was really pulling my hair, and it looks like you are too.  I finally came up with a workaround, that nobody at HP and Verizon could help.

  Finally, I changed the configuration of the fax on legal size paper, and it works like a charm.  For some reason, it was as if the received fax was not aligning with the dimensions of the letter, but now that I changed the settings, I have more the problem of paper all this waste.

  Craig Pettigrew

• Play a voice message before receiving faxes

  I have a HP 6500 has connected to my desktop computer that is connected to a telephone VoIP (MagicJack) system.  Through the MJ I can receive faxes, that part works fine.  My question is:

  Is it possible to have the HP (or my computer) answer the call, then play a voice message before receiving faxes so that callers 'voice' can be a warning that they called a fax line until they get a blaireing beep sound in their ear?

  Thanks for any help you can provide.

  George

  George, welcome to the forum.

  I know what you're trying to do, but have never heard of this fact.  Here is a guide that can help you solve your problem.  It will allow you to use your answering machine with the FAX.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• HP Color LaserJet M476 MFP Pro: How to receive faxes on pc and print later?

  How to receive and record the incoming faxes on pc and brought it back later.

  Hello

  the series M476 supports nto, receive faxes to a computer.

  Below you can find the data sheet:

  Fax features: Interface PC support: No.

  http://store.HP.com/wcsstore/hpusstore/PDF/cf387a.PDF

  Kind regards

  Shlomi