Recommendation of program database for a single project

Similar Questions

• Configure two MS for two databases on a single host, EM for first DB cannot open

  Hi all
  
  My 10 g database version 2.
  
  In the beginning, I created a database called "ORCL" and configured the EM to her, not manually of course. and it was working fine.
  Then, later, I found that I need to install a second database called "ORCLDW", and since I have used DBCA to create, EM is configured automatically as well.
  
  EM for ORCL is: http://phoenixbai:1158 / em
  EM for ORCLDW is: http://phoenixbai:5500 / em
  
  the problem is that the EM for ORCLDW works perfectly fine, even if I can't open the EM for ORCL.
  
  When I use 'emctl start dbconsole', it works for a very long time, but still, he tells 'EM for ORCL is started successfully.
  However, when I try to open the URL: http://phoenixbai:1158 / em
  Once again, it lasts very very long and doesn't have to open it.
  
  Then, someone at - it never met the similar situtaiton?
  someone has an idea of what could be the reason? and how to check and fix it?
  
  I thank you very much in advance and wish you all a great weekend!

  PhoenixBai wrote:
  Hi all

  My 10 g database version 2.

  In the beginning, I created a database called "ORCL" and configured the EM to her, not manually of course. and it was working fine.
  Then, later, I found that I need to install a second database called "ORCLDW", and since I have used DBCA to create, EM is configured automatically as well.

  EM for ORCL is: http://phoenixbai:1158 / em
  EM for ORCLDW is: http://phoenixbai:5500 / em

  the problem is that the EM for ORCLDW works perfectly fine, even if I can't open the EM for ORCL.

  When I use 'emctl start dbconsole', it works for a very long time, but still, he tells 'EM for ORCL is started successfully.
  However, when I try to open the URL: http://phoenixbai:1158 / em
  Once again, it lasts very very long and doesn't have to open it.

  Then, someone at - it never met the similar situtaiton?
  someone has an idea of what could be the reason? and how to check and fix it?

  I thank you very much in advance and wish you all a great weekend!

  the default behavior for OEM is that it supports a single database for each host
  If you need to support multiple DBs, use Grid Control.

  BTW - OEM is NOT necessary to run or support of Oracle's RDBMS

• CSS for a single source project based on XML files

  I use the 3.5 TCS (10 FrameMaker and RoboHelp 9) to create manuals of single source and HTML help. The source files are a book of FrameMaker structured XML files. What is the secret in RoboHelp 9 to set and use a single CSS file for the entire project?

  Currently, the HTML files that RoboHelp product only contain paragraph fethi < paraname > tabs, which do not seem to relate to one of the tags in the files RHStyleMapping.css or default .css.

  Thank you very much

  Jesus-

  Hi Jesus,

  HR, go to file > Project Settings > import > FrameMaker settings > edit

  Your main CSS is likely to be RHStyleMapping.css, but you will definitely secondary CSS applied to take into account the elements not mapped. The unmapped entries are those with the prefix fethi. If you see fethi, you should consider mapping for something directly in your css to take control of the formatting.

  See integration http://framemaker.mattrsullivan.com/2011/04/02/an-overview-of-framemaker-and-robohelp-inte / for more details. This post is about unstruct FM, but is always valid for you.

  -Matt

• Install a network infrastructure for a single-node Windows Server cluster

  Hello
  
  Can you suggest me how to install a single-node RAC Oracle 11 g on a Windows Server 2008 x 64-bit? It's for testing purposes and I do not need two nodes. I know that Linux is better, but my company uses only Windows servers. Our former consultant has been able to do, but doesn't tell us how to, this server has been lost.
  
  I know that to install the first grid Infrastructure. Run the installation program "Oracle Grid Infrastructure", I could install a "Grid Infrastructure for a stand-alone server" successfully. But this Grill is not a RAC database. When you try to install the database software, which is available to me to install only "single-instance database", not "Real Application Cluster installation".
  
  Run the installation program "Oracle Grid Infrastructure", I have tried select the option:
  'Install and configure a Cluster Network Infrastructure'-> typical Installation:
  The name of the SCAN: SRVORAC-cluster
  Validation of ANALYSIS information
  INS-40922 SCAN invalid name - insoluble in IP address.
  
  Is it possible to install a network infrastructure for a cluster to a single node or a node on Windows Server?
  
  Published by: user521219 on January 30, 2012 12:46

  Hello
  You probably misunderstanding about single-node RAC. This feature didn't need that you have only one physical machine in a RAC, this in fact means that in a CCR environment (2 or more nodes), you can run your database on a single node (single instance), and then later you can move this single instance to another node of the RAC (so that you can make some fixes on this node making your database available all the time). It also has a few other advantages, see below.

  http://www.Oracle.com/technetwork/database/clustering/overview/UG-raconenode-2009-130760.PDF

  http://docs.Oracle.com/CD/E11882_01/install.112/e25666/whatsnew.htm#sthref8

  Salman

• 'Normal' code and OBJECT-oriented programming code in the same project

  Hi guys,.

  Have large existing application written in ordinary data workflow code.

  Thought to add a new module, but he wrote in OOP - to learn.

  Is it possible to add OBJECT-oriented programming code to an existing project?  If so, it's a good idea or not?  What kinds of things should I be conscious re. mix of types of codes?

  Thank you.

  LVOOP is a natural extension of type-def clusters in libraries, so he has no problem mixing with 'normal' LabVIEW code  The only precaution that I recommend is the following:

  Class libraries always loading all their confined subVIs (called "methods" in the jargon of OBJECT-oriented programming), and the standard libraries of LVLIB always loading libraries contained everything (including class libraries).  This behavior "one thing costs so everthing charge" may be a domino effect through your project with all sorts of unnecessary things from loading.  To avoid this, be careful putting classes inside libraries and don't always put subVIs in classes if they do not need to be (I often have a regular library to hold 'to support' subVIs to a set of classes.)

  -James

• Photo Story 3 for Windows English project

  My son saved his photo story 3 for Windows (English project) on his computer.  It is a windows XP. Teacher wants that this format used (Photo Story 3 for windows) and asked his students to save it in a removable format or a zip drive.  We erased all information on the zip drive, but it shows again there is no space available on the zip to save him. I reinstalled Photo Story 3 as indicated by the program without problem. But, always the same answer. Should we just by another zip drive? Help!

  Hi, Carolyn,

  You just right-click and "format" drive?

  What brand is the zip drive?

  On an Iomega Zip drive:

  PC Windows users

  1. Insert the diskette in your Zip drive to be formatted.

  2. Open my computer and right-click the Zip drive icon.

  3. Select Format from the context menu of the player.

  4. Select the type of format:

     • Short format allows to quickly erase all data on a disk, so you can reuse it.

     • Use Format Long to repair a disk that has developed the errors or to format a drive where you have forgotten the password.

  5. Click Start to start formatting the Zip drive.

  http://www.Iomega.com/support/manuals/zip1u/main.html?http :// www.iomega.com/support/manuals/zip1u/use_disks.html

  If the above does not work, the flash drives are not that expensive.

  http://www.bing.com/shopping/search?q=flash+drive&qpvt=flash+drive&form=hure

  Alternatively, install the app from skydrive.  Drag the files from the zip drive to Skydrive

  https://apps.live.com/SkyDrive

• How to make a database for an application

  How to make a database for an application. I can create it outside somewhere in my computer and then copy it into the current folder? or is there a standard way?

  Yes you can do it outside if you wish, two programs I've used SQLite Browser and sqlitestudio two do work but sqlitestudio has more features and is the one I now use exclusively.

  There are many others, however, simply search for sqlite application in google.

• for authentication single controller 5508 AP

  Hello

  in our project, they are two of 5508 wireless controller

  We need to set up sso AP for two wlc

  the licenses we bought for only for a controller

  as shown below

  Cisco	AIR-CT5508-500-K9	Cisco 5508 wireless controller series APs up to 500
  Cisco	CON-SNT-CT08500	Range Cisco 5508 SNTC-8X5XNBD
  Cisco	LIC-CT5508-BASE	Basic software license
  Cisco	LIC-CT5508-500	AP 500 Base license
  Cisco	SWC5500K9-80	Cisco Unified Wireless Controller version 8.0 SW
  Cisco	AIR-PWR-CORD-UK	AIR Line Cord United Kingdom
  Cisco	AIR-PWR-5500-AC	Cisco series 5500 redundant power wireless controller
  Cisco	AIR-CT5508-HA-K9	Cisco series 5508 wireless controller for high availability
  Cisco	CON-SNT-CT5508HA	1 year, SNTC 8X5XNBD Cisco 5508 series Wi

  My question to switch to wlc reduancy we're going to assign for each AP in high availability of the primary and secondary ip address

  APSSO how will tip work

  in each access point how to assign IP primary and secondary for each APs at APSSO

  and the licenses are purchased for a single controller

  specialists please advice of the work of these APSSO topology for two controller

  Syed,

  With SSO, you must initially have an ip address for both controllers.  Then when configure you SSO, the controller HA will be the primary backup.  License is required on the controller sku non-HA.  Failover will automatically happen without problem for the AP or end users.

  If you went with N + 1 and not use the SSO, then you need an ip address for each controller and each controller must be configured.  There are many deployments of N + 1 there, but SSO becomes popular due to rapid failover.  The only question is if SSO gets corrupted then both are in decline and that's the advantage of N + 1.

  Your list is great for either.

  -Scott

  Please evaluate the useful messages *.

• Install Oracle GoldenGate Linux to synchronize two schemas from database on a single server

  Hi all

  I have to synchronize two schemas from database (Oracle 12 c) in a single host RedHat Linux to demonstrate and understand the use of OGG V12.1.2.1.0. I try to do. But it's complicated and confused me because I am new to Oracle and Linux. I followed this tutorial ( install Oracle GoldenGate for Oracle 12.1.2 on CentOS/6.x to 6.x/RHEL Linux 6.x EL ). But it is difficult to understand how I can match with two diagrams of database on a single server.

  
  And I found this tutorial (Oracle GoldenGate on Linux: two-way replication of Oracle 11 GR 2 to Oracle 11 g 2). He said: "" If you have that one host, it may be useful to change the /etc/hosts file to create aliases forhost01.example.com and host02.example.com.". What it really means?

  The other seems to be useful. But it's totally different from 1. Is that this will help my job since I use 12 c Oracle Server?

  Can I get some tips to continue my task?

  Here's another tutorial - http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/goldengate/12c/OGG12c_Integrated_Replicat/index.html

  It has everything set up on a single Linux host.

• The fonts in Illustrator are swoop for use with a laser engraving? If not, how do I convert a font for a single path... not an overview of the police?

  The fonts in Illustrator are swoop for use with a laser engraving? If not, how do I convert a font for a single path... not an overview of the police?

  "I try to avoid cutting each line twice.  This is double the cost.

  I hear you. I was there for more than 30 years.

  There are very few single line fonts. And most of the people is the property of specific burning software (i.e. the TTF or OTF fonts). Apart from these burning programs, what had to happen is for a foundry of fonts specifically design a single font. And, from what I've heard of these smelters (for the last 30 + years), the market is too small. I'm not saying that they are correct, it's just that it is their perception.

  Good luck

  -OB

• How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you

  How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you

  How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you

  After two execution plans that have the same sql_id, so we can see what you're talking about.

  See "Oracle Explain Explain Plan optimizer" by Maria Colgan of the Oracle optimizer group

  http://www.Oracle.com/technetwork/database/bi-Datawarehousing/TWP-explain-the-explain-plan-052011-393674.PDF

  Examine the various aspects of a selectivity to parallel execution plan

  performance and understand what information you should be brilliant

  the plan can be overwhelming even for the most experienced DBA. This document

  offers a detailed explanation on each of the aspects of the execution plan and a

  Overview of what caused the CBO to make the decision, he did.

• Hello, I would like to take advantage of the promotions on Adobe Photoshop for a single user (valid until tomorrow), but I have two questions.  First of all, I intend to buy a new computer for a month and for the moment, I don't know if it will be

  Hello, I would like to take advantage of the promotions on Adobe Photoshop for a single user (valid until tomorrow), but I have two questions.  First of all, I intend to buy a new computer for a month and for the moment, I don't know if it will be a pc or a mac. Do I have to decide at the time of the purchase, what system I'll use?  Secondly, I also have a plan for about a month to open an individual company. If I buy the program as a person, could I then use it as a business?

  Creative cloud is cross-platform. Licensing is not serious. By definition, an "enterprise" might as well be a single person. It is totally irrelevant, as long as you purchase a full license appropriate regardless of any promotion.

  Mylenium

• I just remdered and recorded an intro I would like to use for all my projects, it is saved in a (* perl) file and is the only option to save in this format.  "When I try to open this file and start a new project using tha the intro file, I get an error.

  I just made and recorded an intro I would like to use for all my projects, it is saved in a (* perl) file and is the only option to save in this format.  When I try to open this file and start a new project using tha the intro file, I get an error "the file is not a supported file or codex is not installed.  How can that be, I made the file using this program and he does'nt recognize files it creates?  Please advise... Thanks /.

  grethell

  What version of Premiere Elements you are using and on what computer operating system is running?

  You cannot import a project file (.prel) in another.

  For now, generalize choice

  a. export your Timeline (your intro) content to a file saved on the hard drive of the computer. And then import that

  file in new projects by using the new project add Media/files and folders. See publish + Share/computer/and the other

  choices here to generate this file intro for later use in other projects.

  b. you can set up what is called a dummy projects - this is a project with nothing other than the intro file. And, at all times

  you want to use the intro, you open one of these saved dummy projects and add your media sources.

  A lot of things to discuss. Please fill in some details more and then we can refine the answer for your particular situation.

  Thank you.

  RTA

• AMT: cannot allocate memory - is there limit to the databases on a single box num

  Hello
  
  Specification of the server:
  Windows 2008 R2 x 64 with all updates applied
  
  Oracle 11.2.0.1 Standard Edition with Patch 16 applied (which corresponds to all the live database version)
  
  10 GB OF RAM
  
  I have a standby server that has all my databases to watch over him
  
  Recently, I added about 8 new databases on hold to take to 102 and since then I get an intermittent error of TNS. AMT-12531: TNS: cannot allocate memory
  
  I have scripts that loop in all databases one at a time, they start the standby database, apply the new recovery logs archived and close the database
  
  It worked perfectly for years but I started having problems after you have added a few other databases, it probably defective 1-3 times so it is inconsistent.
  
  With all databases only idling server use 6 GB out of the 10 GB RAM available so there is a lot of memory free
  
  If I withdraw half a dozen databases in the scripts, it starts working again.
  
  I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages
  
  Server has been restarted several times and sometimes travel a couple of times before failing and sometimes will fail in the first inning thanks to
  
  Failures are normally towards the end of the script, IE. has applied the newspapers to 95 databases and fails when the 96th!
  
  I reorded the data bases in the script and it still fails at the end, not on a specific database
  
  I also added restarts listeners for scripts that made no difference
  
  I've now changed my scripts, then real windows service does not work for databases and the script makes a net start before applying the newspapers and a net stop eventually. She's now going through without a problem but I would go to the bottom of the issue and keep windows running services in the starting and stopping of their adds time for labour to apply the logs across all databases
  
  Thank you
  Robert

  Have you tried a note

  AMT-12531 on Windows 64-bit [ID 1384337.1]

  I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages

  I don't think that you need several headphones if a listener is enough to support all of your databases running on a server.

• How can I get audio to play for a single slide in Captivate 5.5?

  I am using Captivate 5.5 on Windows 7.
  I added text to speech audio to my slides.

  Previously, I could get a glimpse of a single slide with audio.

  A few days ago the audio has stopped playing to preview the slide.

  The audio plays when I preview project, then 5 slides, etc.

  Do you have any suggestions on how I can get the audio to play again for a single slide?

  Hello

  Look in the timeline panel. More specifically, the area where names appear on the left side. Now, look down. You should see a small speaker icon. My guess is that you've clicked on it to cut it. Jump to the right and literally SCREAMS she's dumb, right?

  Please report only as a problem to Adobe. Ask a clearer indication!

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks