reconfiguration of the updates of Windows stop at 15%

Similar Questions

• My system installs the updates of windows, whenever I stop

  My system installs the updates of windows, whenever I stop.  What should I do to prevent this?

  See: http://support.microsoft.com/kb/910339 . All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• HP ENVY dv6 Notebook PC: press the / STOP the envy of hp dv6 7204se do not work after the update of windows 10

  the power button of my hp dv6 7204se envy key do not work after the update of windows 10

  any help on this please?

  .

• Dell Vostro 1510 Audio has stopped working after the update of Windows Vista.

  Nice day!

  My computer (vostro 1510) began to revolt recently and I wonder if you could help me with this.

  Basically, last week I was talking to my friend on Skype when suddenly my computer restarted due to the update of Windows (I have Windows Vista Business 32-bit). After he turned his back, I realized that there is no audio from the speakers. I tried using headphones but still - no sound.

  Immediately, I went to the 'Sounds' menu and checked if my speakers were still 'active '. They have been.
  Next thing I decided to do was to reinstall the Realtek audio driver, however, did not help or the other. Since then, I tried to reinstall several times but, unfortunately, everything remained the same.

  Then, I thought that maybe something was wrong with my hardware, however, audio spent ALL Dell diagnostics audio tests (so my hardware is very good, yes?). I also tried "System Restore" option and returned to the point before the update... Nothing has changed!

  In addition, as far as I know, all the audio settings in Windows (checked in Registry Editor) are OK.

  What should I do now? My last hope is to completely reinstall the system, however, I decided to contact you first.

  Thanks in advance!

  Solved the problem by reinstalling the operating system.

  Thank you!

• Product number: QH753EA #ABU: Wifi works do not since the update of Windows 10

  Since the update to windows 10 my wifi stopped working. The key of the keyboard is permenantly orange and that changes in airplane mode when you press. I can connect to internet with the ADSL cable. Network shooting report problems it says only: the "Wireles capability is disabled" but I cannot turn it on.

  Return you to W7.

  I highly doubt that Realtek will publish all the drivers for this model card W10 since they ceased support of the drivers for this card model to S8.

• Unable to install the update to windows? 0x800A01AE & 0 x 080070570

  Unable to install the update to windows? cordially 0x800A01AE & 0 x 080070570, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

  http://support.Microsoft.com/kb/910359

  Manual procedure to solve the "0x800A01AE" or "0 x 080070570" error messages to manually resolve this problem, follow these steps:

  1. Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net stop wuauserv
        net stop bits
        output
  2. Rename the Catroot2 folder.

     Note Do not follow this step if you are using Microsoft Windows 2000.

     To rename the Catroot2 folder, follow these steps:

     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        
        net stop cryptsvc
        Ren %systemroot%\System32\Catroot2 oldcatroot2
        net start cryptsvc
        output

     Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  3. Rename the folder "C:\Windows\SoftwareDistribution":
     1. Click Start, click run, type %any, and then click OK.
     2. Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
     3. Type SoftwareDistribution.old, and then press ENTER to rename this folder.
  4. Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
        regsvr32 c:\windows\system32\wuapi.dll
        regsvr32 wuaueng1.dll
        regsvr32 c:\windows\system32\wuaueng.dll
        regsvr32 c:\windows\system32\dllcache\wucltui.dll
        regsvr32 wups2.dll
        regsvr32 c:\windows\system32\wups.dll
        regsvr32 wuweb.dll
  5. Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net start bits
        net start wuauserv
        net start Eventlog
        output

        Solved...!

  Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• Error NET HELPMSG 3521 while checking the Update Service was stopped and the error code "8024000".

  Original title: error NET HELPMSG 3521 while checking the Update Service was stopped.

  Windows Vista. 32-bit, SP1 and 2

  Long story short, I tried to fix my problem of update windows since the beginning of July 2011.  My computer does not stop when you install updates automatically or manually.  I got a 8024000 error.  A shot an email to Ms support and I received an email quickly with some procedures to do.  I don't have to make these 4 days later.  Here is the part of the email.

  This problem may be caused by the following factors:

  1. the Windows Update service has stopped.

  2 corrupt Windows Update temporary files.

  3. bad Internet connection settings.

  4 corrupted DLL files.

  Step 1: Check the services concerned of the update of Windows

  1. click on the button 'Start' in the 'Search' bar type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. double-click on the service "Windows Update".

  3. click on the 'general' tab. Make sure the "Startup Type" is "Automatic" or "manual". Then please click the button "Start" under "Status of Service" to start the service.

  4. repeat the above steps with the Background Intelligent Transfer Service (BITS).

  I completed this step.

  Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update

  1. close all open windows.

  2. click on the "Start" button, click "All programs" and click on "Accessories".

  3. right click on "Command prompt" and click "run as Administrator".

  4. in the window "Administrator: command prompt", type "net stop WuAuServ" (without the quotes) and press ENTER.

  Make sure it is said that he has been arrested with success.  OK, it worked.

  5. click on the button 'Start' in the 'Search' box type "%windir%" (without the quotes) and press ENTER.

  6. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".

  7. right click on the folder, select Rename, and type "SDold" (without the quotes) to rename this folder.

  8. while still in the window "Administrator: command prompt", type the command "net start WuAuServ" (without the quotes) in the window to restart the service Windows updates

  It did not work.  I received a message...

  The syntax of the command is

  NET [accounts: computer: config: continue: file: Group: help: helpmsg: localgroup: pause: print: session: share: start: statistics: stop: time: use: user: view]

  C:\Windows\System32>_

  I tried again from the beginning and now get the following error: NET HELPMSG 3521

  "MS supports has not returned my emails to the technology or the Manager.

  Can someone help me?  Please notify.  Suzzz-Q

  There are many other measures that followed the foregoing.  If anyone is interested in reading all of this...

  Step 3: Component of Windows Update registry

  ============================

  1. click on the "Start" button, click "All programs" and click on "Accessories".

  2. right click on "Command prompt" and click "run as Administrator". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Enter the following command and press ENTER.

  REGSVR32 WUAUENG. DLL

  You will get a window "DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  4. then please proceed to enter the following commands one by one. A success notification is received after each command.

  REGSVR32 WUAPI. DLL

  REGSVR32 ATL. DLL

  REGSVR32 WUCLTUX. DLL

  REGSVR32 STINKS. DLL

  REGSVR32 WUPS2. DLL

  REGSVR32 WUWEBV. DLL

  If please test the issue again and let me know the result. If the problem persists, I'll help you check your Internet connection in our next communication. To clarify the issue and provide more specific troubleshooting steps, please help me to collect the following information.

  How to capture a screenshot

  ======================

  1. press the button print screen (print screen) on your keyboard.

  2. click on the "Start" button, type "mspaint" in the search bar and press ENTER.

  3. in the Paint program, click on the "Edit" menu, click "Paste". Click on the "File" menu, and then click "Save".

  4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".

  5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box"Save as type", click on"Desktop"in the left pane and then click on"Save ".

  Please send this JPEG file to my e-mail account to * address email is removed from the privacy *.

  How to retrieve system information

  =============================

  System information can provide us with more information about the current state of the system. I would check for you. Please send it to me using the following steps:

  1. click on the "Start" button, type "MSINFO32" in the search bar and press ENTER to start System Information.

  2. on the pop-up window, in the menu bar, click on 'File' and click on 'Save', type a file name and choose NFO as "Save as type", click on "Desktop" in the left pane and click Save.

  Please send it as an attachment to * address email is removed from the privacy *. If the file is too large to be sent, please right-click on the exported file, choose "send to"-> "Compressed file (zipped)" and then send the zip file for * address email is removed from the privacy * for further research.

  How to recover the WindowsUpdate.log file

  ================================

  1. click on the "Start" button, type "WindowsUpdate.log" (without the quotes) in the search bar and press ENTER. We will see a file named "WindowsUpdate.log".

  2. now click on the 'File' menu and click on the "save under".

  3. in the left pane, click "Desktop" and click the "Save" button.

  Hello

  Instead of all of the previous steps, you can just try the steps as shown in these methods and check if these help.

  Method 1:

  To resolve the error 8024000 follow the steps in the link and check if it helps.

  Windows Update error 8024000

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-8024000B

  Method 2:

  See also article on the resolution of the problems with the installation of updates and check if this may help:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• I can't install the update for Windows Vista Service Pack 1 (KB936330). I get error code 800F081F & dt000.

  I tried to solve this problem, almost every day since the 01/08/2012 a period of 3 to 7 hrs @ a time, following troubleshooting instructions everything including the fix It Center without success. I even tried to do it manually.  I need a disk to achieve? Please give me detailed instructions thoroughly. Is this a common problem with Windows Vista.

  What are error codes: 800F081F & dt000

  Hello

  1. have you made changes on the computer recently?

  2 is the issue specific to this update?

  3. are you able to install other updates successfully?

  4. What is the brand and model of the computer?

  5 all the troubleshooting steps you have done?

  Try these steps and let me know the status.

  Method 1.

  I suggest you follow the steps in this article.

  Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Method 2.

  Clean boot : Try to set up your computer in a clean boot state and check if you are able to install the update. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Disable Firewall: turn enable or disable Windows Firewall: http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3.

  Learn how to install Windows Vista Service Pack 1 (SP1): http://windows.microsoft.com/en-us/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. The virus scanner is provided so that the computer is virus-free before you start to install the updates.

  Method 4.

  The system update tool scans inconsistencies in the computer where it is installed. It usually takes less than 15 minutes to run the scan. However, the tool might take much longer on some computers. Although the progress bar seems to stop, the analysis is still running and you should not cancel the update.

  The system tool that corrects problems with Windows Update is available for Windows 7, Windows Vista: http://support.microsoft.com/kb/947821

  For reference:

  Windows Update 800F081F: http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/2cf14002-250f-4cd3-baab-185b13d1e501/

  I hope this helps.

• 'Check the updates of Windows', has not highlighted, lack of "Updates of history"

  My Windows Update is unable to work. 'Check the updates of Windows', has not highlighted, lack of "Updates of history". Failed to check the updates. There is no virus, spyware, unwanted software detected. A similar experience?

  Thank you for your response. The Scaner Windows has the result of no viruses, etc..

  I have solved this problem in line with someone, i.e. first stop the service update of Windows, and then delete all the files in "C: Windows/.../Softwaredictribtion/datestore", finally restart the update of Windows. Now it's working.

• When getting the updates for Windows 7, Windows 10 is always as it wants to download - it's August 1st

  I reserved a copy of win 10 last year, then changed his mind. After many hours of searching for the KB, I managed to get all the updates removed that prompted 10 of Windows to download and install (or so I thought). Now, it's August 1, 2016, and I want to get the value of a year of updates for Windows 7. When I check the updates for Windows 7, I want to install, I get the message that the download of Windows 10. Is this REALLY the download? I stop downloading and closed.

  Can someone please help me to get the updates, I need for Windows 7 without Windows 10 showing its ugly head?

  Hi AnnGilliland,

  Thanks for posting in the Microsoft Community.

  To avoid Windows 10 update on your Windows 7 computer, you can reset your component to update Windows 10. Please refer to this link: How to reset the Windows Update components.

  Please mark as answer, if this post responds to your request. Do not hesitate to contact us if you need future assistance.

  Kind regards

  Gilles Ova

• Problems with the update of Windows on Windows 8 and also updated to Windows 8.1.

  Original title: update windows 8 to 8.1

  I really hate this computer is a laptop HP 2000 I got it from a friend and the place its been annoying the * out of me, I try to install the KB update, so I can skip all the other updates and I get an error of BS I use windows update, and I get 188 updates and when im installing the 180th update just white out and stops off the coast while he was on the charger, so I start backup it and now its stuck in an endless loop with the "configuration of the updates to Windows restore changes Failure" he was giving me an infinite loop of spinning points and all I want is to install windows on that 10

  Hi Giovanni,.

  Thank you for your response with the current state of the question.

  I suggest you try directly upgrade to Windows 10 of Windows 8 through the media creation tool.

  I recommend you to check the system requirements for the installation of 10 Windows on the computer.

  https://www.Microsoft.com/en-in/Windows/Windows-10-specifications

  Also communicate with the computer manufacturing and try to confirm if your computer is compatible to install Windows 10 or not.

  If your computer meets all the system requirements, I suggest to use the media creation tool in the link below and choose the option PC this upgrading to Windows 10. Before moving to Windows 10, I recommend you make a backup of important files and folders on the external hard drive.

  https://www.Microsoft.com/en-in/software-download/home

  Let us know if you need further assistance on related issues of Windows and we will be happy to help you.

• The update of Windows 10 1511 reboot loop Bootcamp BSOD ACPI. SYS

  It is a copy of my thread to http://answers.microsoft.com/en-us/windows/forum/windows_10-performance/windows-10-update-1511-reboot-loop-bootcamp/8653... as I was asked to post here by the Microsoft Support Engineer.

  Hello

  Friday night, I went to bed with a working machine. I had a late 2013 Mac Pro BootCamp running with a Windows 10 Pro installed, the Build version before 1511.

  On Saturday morning, I woke up to my PC restart itself over and over again. It seems that Windows Update has decided to put a new version of Windows 10 on my machine without my knowledge. I discovered this after restoring an acronis backup (which took a few hours because of the number of incremental backups)

  Occasionally (about 1 in 20 restarts) it would blue screen with an error:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ACPI.sys)

  But the rest of the time he would just start, flash a window for a millisecond that says (I think) winlaunch.exe, then restart.

  I tried a lot of things to sort it, including:

  (1) restore from a backup, acronis to Friday morning, running sfc/scannow, and then runs the update

  (2) the creation of a recovery USB, enter the console, change the boot to legacy method, so I can F8, then goes into all security modes and mode of illegal product, but I can find where windows 10 now puts the boot log

  (3) restored from acronis, switched to mac, created a new bootcamp drivers usb, switched to windows and run the option 'fix drivers' before performing the update.

  Ntbtlog.txt is not anywhere on the partition. I ran a dir /s > a.txt then open this a.txt in Notepad and searched him.

  I don't know where to go from here. I can acronis restore of a windows 10 work machine the morning before installing mandatory 1511. I don't know how to delay the update no more, I noted during a restore I had delay on updates that are why it has arisen just now.

  I do not know how to find where this BSOD ACPI.sys will come (even if it happens so rarely) or this that its trying to load just before it crashes (so I can try to delete the driver etc. by the front restored windows to upgrade)

  I guess the widowed causes 10 to do a restore, then the restore fails.

  Overall, I get at the end of my wits with this, to go a completely Windows 10 installation work Friday to more than two wasted days, restore backups, try again, rinse and repeat. It's now Monday morning and I am posting this as a ditch last attempt to solve the problem, your help would be appreciated.

  If you need more information please let me know the location of the files, etc, or their names and I will do my best to have copies available for you.

  I will now restore the backup again, uninstall loading of drivers, and then try the update of windows for the 4th or 5th time.

  Thanks in advance,

  Julian

  Woo Hoo, I've solved the problem!

  I uninstalled the drivers of graphics from AMD (with AMD Driver Cleaner) and Arcronis True Image Home 2013 at the same time, then let Windows Update run its course. Now I have a machine with Windows Version 1511 10!

  It took me 4 days of downtime...

  I hope this helps someone else.

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• have we not back up our data to an external device before the update to windows 8.1

  have we not back up our data to an external device before the update to windows 8.1.

  update to windows 8 8.1 will affect the data in the laptop...

  @swati90

  If you upgrade from the Microsoft Store, your applications, data office and personal will not be deleted.

  If you're updating with an ISO will always give you the opportunity to register personal files.

  Error on prudence, I like so I will say that it is not a bad idea to back up important data to an external drive before the upgrade.

• conditionally quickly monitor the key based on LabVIEW being the application of the update in Windows

  Hi all

  I use LV 2009 in Vista.  I use a VI dynamic, in addition to higher level, to monitor the key pad.  It works great except for the fact that when I have another application open during the execution of the LabVIEW application, it still meets the press of button.  that is so that the use of the calculator and pressing the ESC key to clear the display, LabVIEW reacts as well.

  LabVIEW will know if it is the "application of the update" in windows environment?  I know he can tell it is windows that are in front, but what about other applications?  I think to use this to filter keys when LV is not the front application.

  Thank you!

  Charlie

  This is the vi registered under a vi 2009