Recover only half of the image (Basler avA 1600-65kc)

Similar Questions

• Adding image to the screen only half of the image is displayed

  Hello

  I'm trying to add an image to the screen of my application, like this:

  BasicEditField _bef = new BasicEditField(){
      public void paint(Graphics _g){
  
  Bitmap _bitmap = Bitmap.getBitmapResource("3.png");
  _g.drawBitmap(0, 0,  _bitmap.getWidth(), _bitmap.getHeight(), _bitmap, 0, 0);
  
      super.paint(_g);
      }//end of paint
  };
  
  _verticalFieldManager.add(_bef);
  

  the strange thing is that only a part of the image is displayed and I don't know why! I have test it on bb 9000, so I know it has 480 x 320 and my picture is 480 x 176, so it must be shown.

  is anyone of you know what can be wrong?

  Kind regards

  Misty

  OK, I'm surprised that adding text did not work.  Apologies for suggesting it.  Can you tell me what JDE level you try and I have a go here.

  Anyway, the normal way to display a bitmap using a BitmapField.  This should always give you the entire Bitmap.  Give it a try.  You won't have to replace the paint using a BitmapField!

• Image with link in Firefox features, half of the image/link is active in Chrome, image/link in Safari

  I have a page with links to nav 2 from 2 different images. 1 image / link works well with Firefox, Chrome and Safari. The other image / link works well with firefox, only half of the image is active in Chrome and none of the image is active in safari. Fine links documents extraction. I replaced the image, the container as well as relinked. The result is the same. Can someone please? Here is a link to my site (current) PikiPiks: critical film the first 2 images in the left column are currently linked. The first image / link for "From Kiki's Delivery Service" is the problem.  Thank you! MacOS 10.9 / Dreamweaver CS6

  Delete the empty apDiv7 after your tag.

  In this case, apDiv7 has a higher z-index and covers some of the other items on the page, so clicks will this empty layer instead of the links below.

  Some browsers allow you to better guess what you will do when they run into errors like this, looks like Chrome is less forgiving in this situation.

  Also, look at using css floats, margins, and padding to position elements, rather than position: absolute, you are likely to encounter more problems if you continue to use the APDiv button.

• PSE7 when opening the editor only the upper half of the image is displayed

  When I open an image in the editor only the upper half of the image is displayed in the lower part of the screen. I tried to adjust the size of the canvas, but that did not work.

  It seems that your screen resolution is high enough.

  Have you tried the button Zoom at the top right of the screen?

  (different from what I proposed before)

  

  MTSTUNER

• Only half of the icons showing on personal bar

  Only half of the icons showing on the bookmarks toolbar, but when I go in the toolbar custom, then click on 'Done' they appeared all over again.

  Thank you... I downloaded the latest edition, and that seems to have solved the problem.

• HP Officejet Pro 8620 copier copies only half of the document

  During the adjustment of the glass my copier copies only half of the page. When cope since the charger it leaves one side of my page off the coast. I've only had it a few weeks and do not know what to do. Thanks in advance for any help I can get.

  Hello @mburrand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems to copy output.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  In the meantime, I recommend that you perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Windows that display only half of the disk capacity

  I have a new laptop HP EliteBook with Windows 7 SP1 is installed. SSD has 500 GB, but the system is only half of the disk capacity show.

  What can we do?  Thank you.

  

  

  CHKDSK discovered...  0 KB in bad sectors. 719099 KB in use by the system. 65536 KB occupied by the log file. 89854676 KB available on disk. 4 096 bytes in each allocation units total 60636159 the disk allocation unit. 22463669 allocation units available on disk.

  Coincidentally reduce then extend the volume again?

  CHKDSK is essentially a tool of file system and the capacity of the disc that you see in the Explorer disc property is actually the size of the file system rather than the physical size of the volume, the physical size of the volume is based on the head of sector, while the size of the file system is based on the number of clusters (allocation units).  The file system has a total of clusters 60636159 x 4096 bytes = 248,365,707,264 bytes.

  Different size according to the different tools are both correct, but the file system is not using the entire partition, you need to extend the file system with the Diskpart tool.

  At a command prompt, enter the following commands:

  C:\ > DISKPART
  DISKPART > list Volume
  DISKPART > select volume c (here, you can use the figures given by the Volume of the order list or use the actual letter of the volume, in your case 'c')

  DISKPART > extend filesystem
  DISKPART > exit (exit Diskpart)

  Here is a screenshot of the procedure:

  

  The file system extension is relatively safe, but as always you should ensure that you have a good backup of your files before doing any kind of work of system disk/partition or file.

  John

• My printer prints only half of the document, even when I try to print a Test Page. Said troubleshooting that have no problem

  Original title: device: printer

  Dear Sir/Madam,

                      
  I am a user of windows from win98, and I never had a problem with the printer that I couldn't solve. But now, my printer prints only half of the document, and troubleshooting said: there is no problem, I printed the rpinter windows test page, but I only got half! in view of this, I wonder if you would be so kind as to send me the solution to my problem, my resources and understanding have exhausted. Thank you in anticipation of your kind cooperation.

  Hi Sergio,

  We would like to ask after the details with you to help you to come.

  (1) what is the brand and model of your computer?

  (2) don't you make changes to the printer settings prior to this problem?

  (3) is the issue limited to any particular document?

  (4) do you get an error when the printer is unable to print?

  You might face this question when the printer drivers are corrupt or if the Windows service does not work properly. Follow the troubleshooting methods listed below.

   

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link below.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  Check the question and write us with the State of the question. We will help you if you need assistance.

• Imported wmv file now shows that half of the image

  Hello

  I have a standard animation that I use in all my trailers and DVD. This plays ok on PC, but today when I imported a new animation project shows that the lower half of the image rather than the whole image. It seems to be half when plaid in the monitor. The sequence is the same size as the animation. Even if the animation shows, like that in the front source imported in a sequence monitor. Can anyone help? Thank you

  

  It is a known issue with a recent update from Windows.

  Upper half of the video is missing (black screen) - Help!

  http://forums.Adobe.com/message/5494175#5494175

• HELP when I opened the first items 10, half of the image is blocked

  I spent ages on this film and all of a sudden half of the photos that I have projected blue are blackened. I thought that it just was not loaded correctly so I have reopened and uploaded to youtube, but it has always remained the same. It has been great so far what happened and what can I please?

  

  hamishandandyarecool

  Your question isn't just the mold of the other two, but if you find the kb2803821 mentioned, I would like to give it a try.

  Once we exclude the influence of k, then we can look at your problem from a different angle, including details on the relationship of the screenshot posted to "half of the image is darkened".

  Look us for the follow-up to the top and be ready for alternatives, if necessary resolutions.

  Thank you.

  RTA

• Executives ignored in the acquisition of images with 4 Configuration of the camera (cards 2 x 1430), record only half of the expected data

  Hi all

  I have a VI that puts in place a continuous grab for four camera link cameras at 100 Hz (512 x 640).  I have the cameras running on an external clock of 100 Hz for synchronization (comes from box NI DAQ, trigger ports on 1430 cards are not connected to anything).  The VI sticks all the frames in a queue, and then I (slowly) he writes to disk after that I get what I want.

  The problem is, for a minute 4 capture, I get only about 14 000 items in the queue instead of 24 000.  Also, each image gets populated with a number of buffer, so I can see it is missing all the other images or something like that, sometimes it will jump 10 in a row, sometimes it will jump rare... any ideas?

  Here is a picture of my installation of collection (Scripture on the part of the disk is not displayed, but that pours out of the queue is fine)-

  

  Hello

  I see a number of problems with the approach in your VI that I'll try to cover...

  Your consumption with queues and images won't work as you wrote because the images are a type of reference data and so put them in the queues is not copy data values, only the references. So if you keep to the same reference to the image in a queue, they are all pointing to the same data of the image (which may be substituted).

  A better approach is to have two queues of images, representing the 'free' pads and then one that represents the images 'full' (your queue current consumer). You would then have your acquisition loop pull a 'free' image, fill it with data via a Get buffer call and then queue it for your use. Your consumer could pull this queue, do its thing and then queue the image to the queue 'free' for the producer to use again.

  In addition, your code does not currently use the lower level is VI buffer, so you take advantage of the buffering model input-output IMAQ uses internally. The simple Grab acquire VI returns only the most recent image, but if you fall at all it does not use the FIFO. You want to call make buffer with a buffer incremeenting number so that you do not skip the buffers and are allowed to get behind up to the number of buffers in the buffers configured list.

  Eric

• Freeze half of the image only?

  Hello

  I'm publishing an interview with two people where they sit and still. At the end of the best that I got, the person on the left moves in their eyes and leans on the cameraman whose ruins this take. This is while the person on the right is just nearing the end of its dialogue. One or two seconds later I cut away but the eyes moving from the ruins. Is it possible that I can freeze only half the frame (half left) so that the person on the right continues to speak, but the person on the left rest stock again?

  
  

  I have After Effects and other applications if necessary CC for this.

  
  

  Thank you very much
  

  Nest the two elements together and add the melted crossed to the new nest.

• Resize to the size of half of the images

  -Very well, so I used Photoshop for a dozen years now. Before today, I used to most elements and CS5, but I recently got a new Macbook and started using the CS6 for the first time I encountered a problem that I have never experienced before and I couldn't find anyone with the same problem with a Google search. Basically what happens is, when I resize and image, it is resized to half of the pixels that I entered. So if I want to resize an image down to 540px width, it will resize on 270px instead. Then when I go to save for web, the image will explode back to the size I originally entered and lose quality and completely blurred. I've done everything I can think of, including the startup / clear, and I've tinkered with resolution as well. The only thing I didn't do is reinstall. I had a hard time getting CS6 to install and work properly, so I want to exhaust all other options before you uninstall.

  EDIT: Don't know if it makes a difference, but I forgot to mention that the images open half as well.

  You see it in the right size in Photoshop. What other applications is automatically scale to 200% when detecting a high-density display.

  Photoshop can't do that, it would make the useless application for many other purposes.

• HP Envy H8-1549: computer doesn't recognize only half of the new Ram

  Hi all.

  I took a set of ram Ripjaws X 32 gig (4 x 8).  When I install all four chips, only half of them are recognized by the Bios. If I remove two, both of which have not been recognized are visible and working in the same locations they were. It all works, but not all.

  Current configuration: http://support.hp.com/us-en/document/c03666767

  RAM: http://www.newegg.com/Product/Product.aspx?Item=N82E16820231569

  Everything I read on my motherboard and ram has indicated that it is compatible. I updated the Bios and erased the CMS.  I'm a bit of a loss. Am I missing something fundamental?

  What is a tension problem? If so, how can I send it?

  RAM is usually such an easy upgrade. Not so much this time, it seems to me.

  Thank you.

  This seller has guaranteed 8 GB modules for the H8-1549 envy.  The specs are "CL11.

• The program monitor shows only half of the picture

  Hi I'm new in preview, for some reason any when I open a photo in the program monitor, it shows that half of the picture, straight cut, in the Center (see below). I used to be able to see the entire photo and add the title and text to it.

  what setting should I bring back to normal?

  

  The first thing I would look at is the Sequence of parameters - click, on the top menu and ensure that the settings are - post a screenshot please. Your program monitor looks like a size extra-large, much wider than the standard ratio 16:9 HD or 4 K.

  The setting sequence is the basis for everything in your project - if it's wrong to start, all you will be affected later.

  Once you have a correct adjustment sequence you are satisfied, still images or video clips you want to use may not be the same dimensions/dimensions you chose for your sequence (such as 1080 p which is 1920 x 1080 pixels). You may have a still picture with larger dimensions, and then it will appear cropped as you currently see as its size does not match sequencing. Think of it as the photo was too big for a picture frame.

  As Jim mentioned, you can use the effect Adobe path across the source to fit, however it can be quicker and easier to simply with the right button of the image on the timeline, and then select define framework - this will automatically go to the media in your sequence.

  Thank you

  Jeff Pulera

  Safe Harbor computers