Recovery after installation of Ubuntu 10.04

Similar Questions

• IdeaPad Y400 keyboard broken after installation of Ubuntu. Sent in, Lenovo has sent back still broken.

  I have a Y400 Ideapad, purchased in December 2012, delivered with Windows 8. He has recently due to a malfunction after trying to install Ubuntu as a secondary OS. It was very difficult to get installed Ubuntu because UEFI and Secure Boot really tried to stop him, but I have finally installed it and the two operating systems, has been working for about 24 hours. Then, Ubuntu was able to start. On several occasions. Then I started Windows and it seemed that he was working again, except that from time to time when I tried typing, the keyboard type keys I had not touched and then stop responding for about 30 seconds. After that, it would still work for a little while.

  I ran OneKey Recovery to try to solve this problem, wiping my hard drive and reinstall Windows 8 from scratch. Still doesn't solve it. He actually glitched once while I was still setting to the top of my Windows profile, before he had even started for the first time.

  So I sent my laptop for Lenovo and, a week later, they sent back with a new keyboard (despite me telling them that it probably wasn't the problem). He worked for the next few days, but as of today, he started glitching again, much. I don't want to send my laptop for Lenovo again because I need for the class I'm taking. Also, when they sent it the first time, they have not even put it together right. The rear panel was not at bottom, and panel below which was actually folded so that one of its tabs fit on the side of my laptop instead of being inside.

  I really need to solve this problem, but I'm doubting the capacity of Lenovo to do, and I don't want keep it will send if it simply means that I won't have a laptop for 1-2 weeks and then I'll get it broken back yet more. Also, I need even Ubuntu, even if they do not fix it then I have to reinstall Ubuntu and it will probably break again. Not to mention, they will probably wipe my data from it.

  Found a thread discussing this:

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/IdeaPad-Y400-keyboard-auto-typing-and-out-o...

  Turns, the Y400s have a defect. If you select always "on USB" in the BIOS / menu UEFI, it messes up your keyboard. I have activated it when I was trying to get my computer to recognize a USB boot.

  I'm surprised a Lenovo support is not already aware of it. I talked to Lenovo about a dozen employees, including a supervisor and a representative of the customer relationship and no one suggested she could relate to my BIOS settings.

• Satellite U300U warmer after installation of Ubuntu

  Hey guys,.

  I'm new to Ubuntu, but after the passage of Windows Vista, I noticed that my laptop is quite a little warmer when I use windows.
  I mean, I can tell just feeling physically the laptop.
  Rest of the Palm and the touchpad are much hotter than normal.

  When I run sensors my output is:

  acpitz-virtual-0
  Adapter: Virtual device
  Temp1: + 57.0 ° C (crit = + 104.0 ° C)

  CoreTemp-isa-0000
  : ISA adapter
  Core 0: + 50.0 ° C (high = + 100.0 ° C, crit = + 100.0 ° C)

  CoreTemp-isa-0001
  : ISA adapter
  Core 1: + 52.0 ° C (high = + 100.0 ° C, crit = + 100.0 ° C)

  It comes to my computer idle time.
  How are these time kernel? Normal? Bad?

  All that I can do to cool my heart more?
  Are there ways I can check if my fan work correctly?

  Thank you.

  Hello

  The temperature of the CPU to 50 ° and 52 ° is not too high
  Maybe it s a little bit more by using the operating system with preinstalled Toshiba Power Saver, but you shouldn't worry about this value.

  The temperature of the CPU is ok

• Database recovery after installation of all new nodes ORACLE RAC

  Hello!
  The scenario is like this:
  RMAN database full backupset is present, including the control file (database RAC).
  Absolutely new 2-node Oracle cluster software inslalled (without data) on other workstations.
  
  Is it possible to restore the RMAN RAC database on new nodes?
  
  Thanks to all for replying

  Hello

  Yes it is possible

  Some regular examples

  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/rcmrecov.htm#BRADV159

  And check this document
  http://blogs.Oracle.com/AlejandroVargas/gems/RMANBACKRECPRACTICE.PDF

  Concerning

• Satellite C670D-109 - installation of recovery after replacing HARD drive image

  Hello

  I have a problem to restore my laptop.
  My hard drive is not working, I do not have the recovery disks, but I managed to save the HDD Recovery folder in a partition of DATA.

  Once installed the new hard drive, it is possible to recover my original without the cd, but with a pen drive usb installation?

  > Once installed the new hard drive, it is possible to recover my original without the cd, but with a pen drive usb installation?
  Unfortunately, you will not be able to start the recovery image installation. The data saved on unusable USB on this path. It must be the startup created by Toshiba recovery disc creator device
  You can only install recovery image using the recovery disk.

  If you n t have it you can order a new one.

• Qosmio X 70-A - need help with the recovery image installation

  OK, so I recently bought a new laptop (Qosmio X 70 - A) which came with pre-installed Windows 8.1.
  First thing I did was to make a backup of the system, all good and beautiful image... installed a program for a better partition the HARD drive and the program dirty windows. It would not start (a blue screen appeared with the error 0 x 80070035).

  Searched the web for solutions and managed to repair using a recovery media, but the laptop was moving to slow down, the best thing that I thought was a restore with the system that I've done before image.

  I put the image on a blu - ray player and entered the recovery media, troubleshooting, advanced option, image system restore, choose the blu - ray and he went for one minute after this error appeared 0x8078002c and my HD is completely erased...

  Please help me
  Laptop did not come with any dvd/cd etc.
  I don't know the serial number of Windows (there is no sticker on the laptop with the sticker).

  Generally the recovery image installation should not be problematic.
  A few months ago I ve installed Win8 recovery image on friends laptop U940.
  If I m remembering well, I just choose recovery image installation (out-of-box) and the recovery image has been successfully installed.

  There was no some don't troubleshoot option.
  Start your laptop and press F12 to get into the boot menu. Put recovery media in the optical disc drive, choose the CD/DVD/BD drive in the menu and press ENTER.

  Just follow the on-screen menu and choose recovery image installation (State out-of-box).

• A few questions about the recovery image installation

  A recovery USB drive created using the Recovery Media Creator contains the Windows operating system and is it the Windows key to reinstall - how it is activated. Is it different for the repair disk.

  Can be used for a new installation of Windows 7 on a new SSD? Is this just a case of connection and the recovery disc running on the new drive to th? How the recovery Partition can be re-created on a new SSD?

  Drop Hello

  I can see user Justinian gave detailed answers, and I hope you understand how it all works now. Of my overwiev aside:

  What exactly is recovery image?
  + Recovery image is an exact copy of a hard drive and contains the exact copy, byte by byte, a hard disk partition. The copy includes all the partition information, sectors priming, the table of allocation of files, installation of operating system and software application different. +
  + You are using installation Recovery CD/DVD/USB, you can restore your system after heavy data loss, caused by an accident of operating system, hardware failure or complete virus attack. +
  + Recovery image installation procedure allows the installation of system and easy to user. Unfortunately, it is not possible to restore only certain files from a disk image. +
  + Each recovery image is designed for a specific model laptop and it cannot be used for any other series of notebook. +

  With other words, recovery image is a software package that contains Windows operating system, all the drivers needed for some portable model, Toshiba tools, utilities, and also some other software. A lot of people don't like these additional software, but no you don't have to use it. all things you don't like you can remove it from the system.

  Activation of recovery image:
  When you buy the phone model you also purchase the license for the preinstalled OS version that you get with your machine. After start and contact to the internet OS will be checked and activation will be valid.

  Please note: you can reinstall original image recovery 100 times if necessary. There is not a kind of limitation, and whenever it will be activated.

  Take care of your recovery media (DVD/USB). Do not lose it.

  Of course, it can happen that you do not find your recovery media. In this case you can order.
  Recovery order - https://backupmedia.toshiba.eu/landing.aspx
  Questions and answers about ordering recovery DVDs - http://aps2.toshiba-tro.de/kb0/TSB0202TA0000R01.htm

  If you have any other questions do not hesitate to ask.

• Re: Vista recovery after Dban

  Hello everyone!
  I want to erase my HD with Dban and reinstall my Vista OEM afterwards, because I travel a lot and want to use this as a travel-laptop only, not private information on this subject.
  So my question is: is it possible to reinstall Vista with the recovery after using Dban CD, because it clears the full HD.

  Thanks for your help!

  Alp

  Why simply do not test you it? The recovery media is for the installation of the OS. If I don't write, I assume that you will try it anyway. :)

  Of course you can do it. At the beginning of the recovery procedure new partitions will be created and operating system installed.

• Installation of Ubuntu on Inspiron 15R special edition

  I recently bought a Dell Inspiron 15R Special Edition and I tried to install Ubuntu LTS 14.04 on it. The installation went well, but he could not start after installation. I tried to disable SecureBoot in the BIOS and I restarted the computer. He has yet to start. Help would be greatly appreciated.

  Try again installing with Secure Boot disabled and make sure of two things:

  1. to select UEFI DVD in BIOS to start

  2. need for 64-bit Ubuntu 14.04 (supports UEFI)

  Keep you the version of Windows that has been preloaded from the Dell factory or you install with Windows or erase Windows and replace it with Ubuntu?

• Recovery after disaster - new host names, locations of different files. -noob

  Hello
  
  I am a "junior dba' best, pardon the beginner questions.
  
  I'm learning works recovery after disaster before that I never do. My scenario is that I'm assuming the worse where I actually take backups RMAN backupsets and auto, copy them to a new computer, and all rise again.
  
  In the documentation, I read that it says that you should copy tnsnames.ora and listener.ora. My first question is my hostname dead.franklyn.bignose.ca machine "works, but pretending is dead" and the NEW machine has live.franklyn.bignose.ca. tnsnames and listener.ora both of course refers to old.franklyn.bignose.ca, so I do not know how to approach this problem.
  
  Second, the new machine is that a new installation of 11.2.0.3 and the db home in/u01/app/oracle/product/11.2.0/dbhome_1/ old one was an update of 11.2.0.1 11.2.0.3 so he lives at u01/app/oracle/product/11.2.0.3/dbhome_1/. I don't know how cranky that will make Oracle.
  
  Any comments or advice?

  My first question is my hostname dead.franklyn.bignose.ca machine "works, but pretending is dead" and the NEW machine has live.franklyn.bignose.ca. tnsnames and listener.ora both of course refers to old.franklyn.bignose.ca, so I do not know how to approach this problem.

  You must set your file listener.ora accordingly with respective host names. Say about the live host name, the listener.ora should have the hostname as living and dead server, the listener.ora must have the hostname as dead

  Second, the new machine is that a new installation of 11.2.0.3 and the db home in/u01/app/oracle/product/11.2.0/dbhome_1/ old one was an update of 11.2.0.1 11.2.0.3 so he lives at u01/app/oracle/product/11.2.0.3/dbhome_1/. I don't know how cranky that will make Oracle.

  It wouldn't matter. Only thing is, you must make the appropriate changes in the required files (say listener.ora).

  Refer to this

  http://learnwithme11g.WordPress.com/2011/12/20/creating-physical-standby-database-with-RMAN-duplicate/
  http://learnwithme11g.WordPress.com/2011/12/07/creating-a-physical-standby-database-11gr2-3/
  http://www.Oracle-base.com/articles/11g/DataGuardSetup_11gR2.php
  http://gavinsoorma.com/2010/03/17/create-standby-database-using-11g-duplicate-from-active-database/

• Thunderbird crashes after installation of vn 38.4. Solved. Cause - bad record?

  (This question was published only because I could not respond to existing similar questions without registering first.)

  Problem was apparently a Thunderbird randomly hanging after automatic update to 38.4 on Windows 7 Enterprise. The process of dropping out/no response took place a few minutes after start of TB, compose messages, send or download of IMAP mail.

  Shortcut to the final solution - probably corrupted files or folders at the OS level.

  For those who are conducting similar research I also watched the references linked below.

  En route to the solution, various obfuscation were met, all of which were interesting but NONE OF THESE solved the problem of the suspension, namely:

  -back to Thunderbird 38.1 extracted from Mozilla's FTP repository

  -Disable all modules in SafeMode as suggested in posts below

  -deactivation of reminders on calendar, pop ups and sounds like suggested in the posts below

  -turn off sounds (in the systray) as suggested in posts below and new mail alerts

  -Discover, finally, only one of the half-dozen or so synchronized account IMAPs has caused the problem, which is an account Exchange-synced via the excellent DavMail (Davmail upgrade to the latest version was another diversion)

  -assuming that the compaction of TB was not his work and that he is too much vacuum/zombie files left lying around, leading to a redundant cleanup using Thunderfix (http://www.parhelia-tools.com/products/thunderfix/thunderfix.aspx), was nevertheless his cleaning of employment but not a solution

  What worked then...

  The procedure of backup profiles recommended TB in Thunderfix and elsewhere led to discover that the copy of Windows has won at least one file during the copy. Suspecting lower level corruption, I ran chkdsk D: /f (since all data are on D: and not on C: with the operating system). No major problems found aprt of 4 files analyzed once again.

  I resorted to the use of SynckbackSE to do the backup instead, noting that one of the failures was Junk.msf. That and the knowledge that the account linked to Exchange was the likely to be the culprit, I restarted and deleted everything in IMAPmail\localhost\ (DavMail connects via localhost stored files).

  Restart Thunderbird (always on 38.1) and connect via DavMail pulled back all messages and folders from the source Exchange to resynchronize records localhost TB successfully. No need to use backup or same setting of TB.

  Will probably now improve return to 38.1 after a period of stability.

  After years of use of Thunderbird of the dowry of the year, it's nice to know that it was not primarily at fault.

  REFS:

  Thunderbird starts by does not respond after the update to version 38
  https://support.Mozilla.org/en-us/questions/1073169

  Thunderbird crashes, hangs, or freezes often and seemingly randomly
  https://support.Mozilla.org/en-us/questions/1062142

  Why Thunderbird freezes my computer after installation of exit 38 RESOLVED:

  hardware acceleration = suspended new pop ups (bug message notification

  1186755)
  https://support.Mozilla.org/en-us/questions/1068495

  Thanks for the info

• Windows 10: After installation

  9 days ago I installed Windows 10 successfully on my iMac end-2012. I wonder since if I still need to keep my USB Flash drive plugged after installation. I have kept in just in case wherever she would break something and tried to find an answer but decided to ask here. So basically what I have to keep the flash drive in my iMac or will I still be able to run Windows 10 unless it is plugged. Thanks for all who will read this and help me with this problem.

  I see no reason to keep the flash drive is plugged.

  Was this a new installation or an upgrade of Windows 10? Your order of brightness of the keyboard (and other features on the row of function keys) work? Cam sex? Touchpad?

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• After installation of the latest version of firefox on the homepage still says that I don't have the latest version

  After installation of the latest version of firefox and I use the new icon on my desktop, it always says that I don't have the latest version. Installation will correctly

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox, I do not think that it is maintained by Google.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

• Boot problem after installation of Linux Mandrake 10

  Hello!
  I installed Mandrake 10 on my computer toshiba tecra S1 laptop.
  But after installation and restart, the laptop stops in sequence starting with the toshiba logo.

  I tried the F12 key to select the boot device, but it does not work.

  If you have a solution to this problem please tell me.

  Thanks in advance.

  Hello

  It is not easy to tell what the problem may be, but it is possible that the boot manager not properly installed.