Recovery drive stalls on blue screen

Similar Questions

• Unable to boot to HARD drive or disc - blue screen Vista: 0 x 50 or 0x7E

  I can't start Vist from my drive hard or with the installation disc. Boot from the HARD drive gives a blue screen with the error 0x000007E code and boot from the drive allows me to launch the recovery program, but once I click NEXT for the first time, it goes to a blue screen with error code 0 x 0000050.

  I saw a lot of people have had these errors when the computer is running, however, I'm not able to start somehow, not even in safe mode, last known good configuration, etc.. I also tried to clear the CMOS with no luck.
  Any help would be appreciated.
  It starts very well when I got to work last night, but won't do a thing tonight.

  Hey Ross,

  Unplug all external devices (except keyboard and mouse) and check if it can boot up to the desktop in all modes.
  If this is not the case, contact the manufacturer of the system for more help.

• Pavilion g series 1016-tx: with a burned (more likely) display card, I can't get done recovery without getting a blue screen

  Hello all, I have this old laptop that has one of these double called graphics cards. Unfortunately the ATI you won't work after a few years, I get blue screen when you try to start. I disabled the ATI display driver, and he worked well with the integrated INTEL card.

  And then I tried to restore the thing to factory default settings by using the Recovery Manager. Once more I am getting blue screen when you try to start, which means I can't get the recovery made. And this time I won't be able to boot in safe mode to disable the display driver.

  Any help?

  Hi @JonJon ,

  Welcome to the HP Forum! Is a great place to find answers and advice! You have the best experience on the HP forum, I would like to draw your attention to the Guide of the HP Forums. First time here? Learn how to publish and more.

  I understand that you have a failed graphics card that overcame you by turning off that one and using the integrated card, when you tried to perform a recovery, that he had failed as a result of the card, recovery won't work due to the fact that it tests the equipment prior to installation and of course it will detect the problem.  I don't know, but after talking with a colleague, you should be able to install from a disk of Windows, but I am not sure. You may be able to download Windows from the web, if this is not possible, it would be probably more cost-effective to replace Notepad.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. "In addition, by clicking on the" ""Twww.Mountainview.rsb.qc.ca Up ' below is a great way to say thank you!

• PC won't start at all, and when I try with the recovery cd, I get blue screen

  ORIGINAL TITLE: Help me please

  My toshiba satellite p200-123 moel is any commissioning and when I try with the recovery cd I get a blue screen, also I can't start safely mode.the error message I get is... the file is maybe corrupt.the the file header checksum does not match the checksum calculated... help pleasseeee

  Hello

  You are booting from the recovery disk?

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  If you continue to have problems with the help of Toshiba recovery disks, you will need to contact Toshiba.

  As you get a blue screen, you may have a hardware problem.

  Toshiba support:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  You can also try the free Toshiba Support Forums:

  http://forums.Toshiba.com/

  See you soon.

• Installation of Windows 7 recovery disk stuck on blue screen

  Hello

  I have the computer hp pavilion dv6 laptop. I am recovering my system with the recovery discs, I created.

  But he remained afetr windows logo on a blue screen with the mouse pointer.

  and whenever I tried to install other media then its shows 0Xc00000f error.

  What to do please help me.

  Hello akshay_p,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is stuck in a blue screen, it generates an error message, and I'd love to help you!

  As you restore your system with your recovery discs, I recommend later in this document on HP System Recovery troubleshooting (Windows 7). This will help you successfully perform a recovery of the system on your system.

  For more help, I'll need to know:

  product and model number your laptop.
  The bit version of Windows 7 , you are trying to install on your computer.
  If your computer has completed all its important updates of Windows.
  If you have updated your drivers from HP the HP SupportWizard.
  If it is a current or recent problem.

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!
  
  Concerning

• Pavilion dv7-6195us lost drive D, but won an F drive after a blue screen stand

  Today, I saw the dreaded after a udate Microsoft blue screen so I turned off and restarted and everything "seemed" fine until I noticed my "D" drive was now looking to drive "F". I see everything that was in my "D" drive has been changed on disk "F".

  I did a "Restart" and then noticed that I didn't drive "D" or "F". I turned off the laptop via a software, restarted the computer and now have a drive "F".

  No idea why this is happening? How can I get my drive "D" back (I have a number of programs that drive the "D" of source for data, while asssuring that I will lose everything that is now featured in my drive "F".

  Thank you

  Stan

  Hi, Stan:

  Only, you should be able to change the drive letter using disk management tool in windows 7.

  See the link below for how to do this.

  http://Windows.Microsoft.com/en-us/Windows/change-add-remove-drive-letter#1TC=Windows-7

  I don't think that changing the drive letter should have an effect on the files on that partition.

• Error during device driver software installation blue screen

  Original title: 'Install the driver software for device' => BSOD

  'Install the driver software for device' => BSOD (WD My Book World Edition II network storage)

  Hello

  I have WD My Book World edition II network storage and it worked fine with my Vista Home Premium (64 bit) beyond six months, I got it.

  Months ago I have access from explorers file search 'network '.  During this point Vista asked me something like "want to install you the drivers for this device? I pressed No. because previously there has been no need to install anything. After that Vista has asked same question whenever I start my computer. Annoyed by the same query I finally pressed Yes. Then it started to install drivers and I had blue screen.

  Now whenever I start my computer (if my storage network is turned on) vista begins to install the drivers and accidents. End result is that I can't use my network storage.

  No idea how to solve this problem (without formatting and reinstalling vista)?

  Hello

  the cause of the accident is the driver:

  Image path: \SystemRoot\system32\DRIVERS\mrdd.sys
  Image name: mrdd.sys
  Timestamp: Wed Nov 12 07:44:48 2008

  From what I see the pilot belongs to your driver SATA of Marvel . As you can see that the driver is a bit too old. Update the driver, please.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Names of specific driver for the blue screen error Codes

  Hi all! Need your help please! Like so many others, I received Error Codes blue screen, that crash my system. I need to know the names of the specific drivers associated with these codes so that I can disable them (in accordance with the instructions of Windows), internet research has not helped. If anyone knows what are the names of the associated drivers or how to determine them it would be greatly appreciated! The error codes are:

  0x0000007E; 0XC0000005; 0X82D1F1C4; 0XF89EFB04; 0XF89EF800

  Thank you!

  Hi Anna K.

  When you encounter a Blue Screen of Death (BSoD) in Windows, the computer saves information about the error message in a log file. This log file or minidump file is saved in the subdirectory of Windows Minidump (C:\Windows\MiniDump). Generally the information stored in the minidump file can help identify the cause of the blue screen error message and help you solve the problem.

  For more information on the reading of the memory dump files, see the following article:

  How read partial memory dump files that Windows creates for debugging

  See also:

  How to troubleshoot a Stop error 0x0000007E in Windows XP

  Note The article above applies to Windows XP. However, you can follow the steps to solve the problem.

  If you don't have any service pack (SP) installed, please consult you may receive an error message "Stop 0x0000007E" after you enable the BitLocker Drive Encryption feature in Windows Vista

  In addition, you can also download the minidump files so here experts can analyze the cause of the error on a blue screen.

  See use SkyDrive download collected files and post screen shot/image

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• CD/DVD drive, causing the Blue Screen of Death stop

  Software from CD/DVD in my Dimension E510 desktop seems to be the dreaded blue screen shut downs - usually as a CD is ejected. The web page error analysis Windows that appears after that restart indicates the problem is caused by a resulting driver. It's the Sonic Digital Media software provided on the system, but sometimes when I run the program I get a warning message saying that the software is not an approved final version? I would like to uninstall the Sonic CD/DVD software which seems to be the cause of the problem and replace it. This will probably solve the problem of the "blue screen", and which would be a recommended CD/DVD operating system that would be compatible with my system. Any suggestion would be appreciated.

  Name of the operating system Microsoft Windows XP Professional Version 5.1.2600 Service Pack 3 Build 2600

  System manufacturer Dell Inc.

  System model Dell DM051

  System Type X 86-based PC

  Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 2992 Mhz

  Total physical memory 1 024,00 MB

  Available physical memory 479,88 MB

  Total virtual memory 2.00 GB

  Available virtual memory 1.96 GB

  Drive D:

  Description CD-ROM drive

  Name the HL-DT-ST DVD - ROM GDR8164B

  Manufacturer (Standard CD-ROM drives)

  IDE\CDROMHL-DT-ST_DVD-ROM_GDR8164B___0D08___\5&29A96F35&0&0.0.0 PNP device ID

  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 22:59)

  Drive E:

  Description CD-ROM drive

  _NEC DVD +-RW ND-3530 name has

  Manufacturer (Standard CD-ROM drives)

  IDE\CDROM_NEC_DVD+-RW_ND-3530A___103C___\5&29A96F35&0&0.1.0 PNP device ID

  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 22:59)

  
  

• Pavilion dv6-2140ei. Missing driver problems and blue screen.

  Hi, I'm florent

  I have problem devices on my PC which I think might have caused the blue screen issue.

  Base system device:

  1. PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 91078216 & 0 & 03E4
  2. PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 91078216 & 0 & 04E4
  3. PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 91078216 & 0 & 01E4

  MEDIA:

  1. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0001
  2. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0101
  3. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0201
  4. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0301

  Unknown device:

  1. ACPI\ENE0100\4 & 23038812 & 0

  Please help, I would really appreciate it.

  Hello:

  Here are links to the drivers you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100095-3 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4105332 & sw_lang =

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75510-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4105332 & sw_lang =

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75076-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4105332 & sw_lang =

• Dell XPS 420 with Vista Home Premium, replaced the hard drive, download now blue screen errors

  My girlfriend has a desktop Dell XPS 420 quit working a year or 2 ago. A computer technician told me that it sounded as if the hard drive was bad, recently I purchased from Dell, a Seagate 1 TB hard drive (the original is a Western Digital 320 GB).

  I bought also, once again from Dell, a copy of its installation discs for Windows Vista Home Premium 32 bit.

  I installed the new hard drive, correctly, as far as I can tell, but I tried several times over the past days to install Vista and a few times I got errors (BSoD) STOP and a few other times, Windows Installer errors.

  What's wrong?

  I run Dell diagnostics that took almost a whole day, but I don't think anything. I have not partitioned the hard drive, it's like 931 GB.

  I think that may be something related to the RAM, but I'm not sure.

  Thanks for any help.

  Hello

  Here is the information on the Dell Diagnostics:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  And Dell has provided information on how to reinstall Vsta using their recovery disks.

  "Manually reinstall your Windows Vista operating system"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  For more information, try the Dell Support Forums.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• video driver causes a blue screen every day

  Windows can't find a solution.  I am an old cyber-fool.  Bult pc has 2 years by the company which seems to have disappeared.  don't know what info to search.

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
  If you are overclocking stop.  (chances are if you are unsure if you are, you are not) a
  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".  We need at least 2 FILES DMP to diagnose and confirm
  
  The procedure:
  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone". (if available on your site, MS has this)
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.
  http://www.WikiHow.com/use-SkyDrive

  
  To ensure the minidumps are enabled:
  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.
  
  Please also run MSinfo32 and download the output as well.
  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

  System specs are often useful so include everything you know

• Nvlddkm.sys for my GeForce 6150SE nForce 430 graphics card driver causes a blue screen of death, whenever I look at a video of youtube for a long period of time. I have re-installed Windows 7 Ultimate 64-bit, and it always does.

  I run Windows 7 Ultimate 64 bit, Skype, Teamviewer, client Pidgin, mIRC, Firefox, Kaspersky Internet Security 2010, openDNS updater, iTunes, and Outlook 2007.

  This problem has caused a unbootible machine when it happened first. It stops happening when I uninstall the display nvlddkm.sys driver, but when it gets reinstalled via Windows U [date and I restart, it bluescreens.] When I reinstalled the operating system, I was able to work normally again. I'm afraid that this problem could start again however, please help me.

  Try the following drivers from NVIDIA:

  http://www.nvidia.com/object/win7_winvista_64bit_191.07_whql.html

  Uninstall the video drivers that are currently installed and turn off any antivirus real-time protection before installing the new drivers.

  Make sure that antivirus real-time protection is reactivated after the installation.

• Re: Satellite L450D - blue screen during installation of Windows XP

  Hi, laptop just out of warranty and the HARD drive was crushed, no return allowed ups recovery so don't not on the new HARD drive installation.

  I installed the new HARD drive and began to install XP. Implementation of process gets to the point where windows will write the files to the HARD drive and the blue screen appears! What is a SATA driver problem?

  Have tried with a copy of XP, I with the SATA drivers on it but don't know if it's a problem of controller or a specific driver from Toshiba.

  Any help would be appreciated... TIA

  Hey,.

  As you can read in 100 other discussions here in the forum, the problem is the SATA driver you need.
  As far as I know Satellite L450D a AMD chipset, so you can find the SATA driver in the display driver package that you can download from the official website of Toshiba.

  In addition, I would recommend reading the other discussions here in the forum. You can also read the son of other laptop models, it s always

• Registry problems cause hard disk by clicking on, then blue screen

  Dell support said the clicking hard drive and next blue screen is caused by a registry error. In order to solve a problem of major virus and start over, I have completely reformatted the hard drive and installed the operating system and other programs, so I can't understand why I always have a registry problem.  Although I can not specify the exact moment, it seems to happen after an update of Windows, but also occurs at random.  It would also be the installation of MS Office 2010, because I do not remember what happens before the 2010 Windows Installer.  I read that registry cleaners do not work, so I am at a loss for what to do. What I don't understand is how the registry is damaged when all that I've done is install everything from scratch.  I have a Dell Dimension 5100 running Windows XP Home Edition w/SP3.

  Hi LiveToFish,

  1. What is the problem on the computer after reinstalling Windows?

  2. don't you still get the errors blue screen on the computer? If so, then what is the message on the blue screen?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then check the event viewer to determine the cause of the blue screen on the computer and post back with the details.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427