Recovery media not recognized in HP Recovery Manager Windows 8

Similar Questions

• Download Recovery Manager windows 7 64 bit

  Hello!

  I formatted my laptop, I installed Windows 7 from a USB key again (here I copied an ISO image of windows 7) and I lost the HP Recovery Manager.

  The windows do not work properly and I am trying to restore to factory settings and make my laptop, it was when I bought it. But for this, I think that I need the Recovery Manager.

  Could you tell me how to download the Recovery Manager?

  I have a HP Pavilion dv6-6140eg Entertainment Notebook PC driver, Windows 7 Home Premium 64-bit.

  Thank you!

  petrosss wrote:
  

  I am trying to perform a recovery of the system HP (Windows 7) but does not work.

  I press F11, and there is an error:

  

  Obviously, I do not have the Recovery Manager and I do not have the windows installation disc, that's why I made a copy in a USB port and tried to install it like that.  The screen a problem Windows BCD of the Bank. That will be a big problem to solve

  Therefore, the only solution is to order a HP recovery disc and then I install the HP recory Manager?  Is the best solution.

  in this way after that it can install windows 7? You can still install Windows 7 in the journal you have twenty-five characters license activation key.

  Once you have the recovery usb media you can put your laptop in the State wherever it was when you removed from the box when there is a serious issue. If Windows 7 is the operating system, it came with and then by running the Recovery Manager and performing a recovery image factory will reinstall Windows 7 and the recovery partition.

  Do yourself the favor of order recovery media usb instead of a set of recovery disks. USB recovery media is durable, unlike a game of recovery disks, which can be damaged by a simple scratch on the side of the label.

• Device not recognized USB keeps popping up - Windows 7

  I have been using a wireless keyboard with the Sony Vaio laptop with Win 7 64 bit for a year and, yesterday, the keyboard no longer works.  The keyboard works fine with 2 other laptop computers (Win7 and XP).  Even when I unplug the dongle, the message "USB device not recognized" keeps popping up ever minute or more.  All other USB devices (i.e., memory keys, portable HDs, etc) work very well.  I uninstalled all the USB controllers in Device Manager and rebooted (multiple times).  I tried to go back to a system since a couple of days restore point.  Nothing solves the problem.

  I wish that the keyboard to work again, but also really want the message stop appearing.

  Thank you.

  Thank you for your advice.  I tried all these.  None worked.

  Suggestions posted another user, I completely turned off my Sony notebook; has out the battery. waited a few minutes; restarted and viola - no more boring don't pop up error message, no error in Device Manager and I use the USB keyboard Adesso WKB-3000 wireless key in the response.

• HP 15-r248nf: hdmi port not recognized on HP laptop after windows 10 update

  Need help! My laptop HP HDMI port does not work, apparently, that the HDMI is not recognized after the last windows 10 updated.

  Hi Lyn11,

  Thank you very much for your quick response. Yes, there are ways to find the product # and the n ° of the device.

  • On the desktop, (first screen of windows with all programs closed) Please press this key combination to bring up the system information which will also give the product # of the unit. Please, note it and n ° of the series unit. Don't post not your n ° of set of information on HP forums. Press the fn key (function key) and press "ESC" on the keyboard at the same time to bring up this information.
  • You may also locate in the bios. Please turn the unit off.  Wait a few seconds and as soon as you put it towards the up keep pressing the "Esc" key immediately, gently several times.
  • It will bring up the start menu. Then press the F10 key to go into the bios. The bios will also give the serial number information and product.
  • A third way to locate the product # would be to power down the device. Unplug the charger and remove the battery.  Then use a flashlight to look inside the compartment to locate the product #.

  Please visit these links which may provide more useful information.

  Link1: http://h30434.www3.hp.com/t5/Notebook-Audio/AMD-HDMI-port-on-dv7-laptop-is-lost-after-Win10-free-trial/m-p/5813013#M78967

  Link2: http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Boot-Device-Not-Found-Error-When-using-HDMI-cable-only/m-p/5803624#M139030

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. Please keep me in the loop.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• Equium P200 - wireless network card is not recognized or in Device Manager

  Hello

  I recently bought a laptop computer used by my friend, an Equium P200
  I reinstalled Vista and downloaded the correct drivers and everything works fine apart from a Wi - Fi connection.

  I took on the key board and checked that the mini pci card in properly installed and even tried it exchanged for another

  The system crashes to recognize that one is plugged, when you go to the device under network drives Manager only Realtek LAN is listed (which I suppose is the Ethernet Jack)

  The WIFI card is an Atheros AR5BXB63

  Any help really appreciated.

  Some unknown device is listed in Device Manager?

• U2713HMs not recognized by Dell Display Manager?

  Hello

  I have a setup of 3 monitors x U2713HM on a desktop computer with two nvidia GTX470 graphics cards SLI. The monitors are connected with the dual link DVI cables provided with the monitors and the drivers have been successfully installed too, I can see the name of the monitors in the windows display properties. However the DDM displays a warning message "please connect a dell monitor supported" and when I click on it it has a longer General wanrning message asking me to check the compatibility of the driver screen and power cycling the monitor... I tried all the facilities of the DDM and update one included in the CD version 12XX something up to the most up to date which is 1360 ago only a few days but no luck. Installation of windows is windows 7 64-bit sp1. It is also an open in the center of dell support ticket and I am very satisfied with their response so far, but we still have not solved the problem. I just thought posting here in case someone has similar problems with the gtx470 or sli configuration.

  Thanks in advance,
  Vangelis

  DDM requires that the display driver support DDC/CI, who sometimes gets broken in complex configurations of SLI. Make sure that DDC/CI is activated in the MENU of each monitors, and that you are not running no matter what 3rd party or commercial temperature that may interfere with the DDC/CI of monitoring voltage. Then try a different NVidia display driver.

  If none of this helps temporarily simplify your configuration to see how DDC/CI gets broken in the NVidia driver. Start with a monitor and a graphics card and run DDM 2 monitors and then one map graphic, then 2 monitors on two non - SLI graphics cards, then 3 monitors on 2 graphics cards, then SLI, 2 (back to the normal configuration of your favorite) graphics cards.

• Scanner MF4150 Canon not recognized after November 18/19 Windows Update

  Canon MF4150 on Vista 32 I ran without any problems for over a year - until update last week of Windows. Built-in printer still works fine. But when I try to use the scanner, I get the MF Toolbox that he does not have to scan supported. System Restore puts everything back to normal, and there is no updated driver available. Can't do a system restore to every day, and I don't want to disable Windows Update. Any ideas please?

  In Re KB976470: see section «changes...» "of http://support.microsoft.com/kb/976098: If you do not reside in one of these time zones (i.e., Georgia or Greenland, as you live in Europe), you can keep it hidden. (I doubt that this update caused the problem).

  In re KB976470: If the 'window Date and time in Control Panel' never displays the error message "DST ends [Date out of range] 0:00...» the clock is not set to reflect this change", you can keep it hidden, too. (I doubt that this update caused the problem).

  In Re KB973688: If the Update for Windows Vista (KB954430) security is listed in Add/Remove Programs, it would be OK to keep it hidden. (KB973688 isn't a critical security update.)

  In Re KB973687: If you have never encountered situations where the recovery request cause a World Wide Web Consortium (W3C) Web server to block the well known definition of the Type of Document (DTD) file types [or you don't know what that means], it would be OK to keep it hidden. (KB973687 isn't a critical security update.)

  =======

  Note: It is best to keep the automatic updates on the "download updates but let me choose when to install them" option. This parameter is meaningful (i.e., updates will be downloaded but will not, install individually or in a group, without your approval).

  If you select the third parameter ("check for updates but let me choose... (''), no updates will be downloaded without your approval. However, the approved updates will be downloaded and installed automatically once you have approved them. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I am not recognized as program administrator of Windows wireless? How can I make sure that the system recognizes me as an administrator on all programs so that I can fix and to use them properly.

  The Windows wireless program does not work and diagnostic tests tells me to contact the administrator. I am the administrator, but the system I cannot use diagnostic tests or run the recovery. What should I do?

  Hi Redemption_Abounds,

  I suggest that you check if you can access msconfig from safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HARD drive is not recognized in the installation of Windows 7 settings

  Hello

  I'm trying to install Windows 7 Home premium to my Toshiba Tecra S3 model PTS30E 00Z036DU but when I install Windows 7 after a while he asked me about the witch device to install one must choose a hard drive, but the field is empty then I choose to load the driver, but I put t know which driver I need, I try my HD which is installed on this laptop and I have windows xp who works at the moment on this laptop but it don t accept this one an of my Toshiba CDrom Setup is not a windows 7 looking...

  Can someone help me?
  I've updated the BIOS to version 3.20

  Concerning
  Michel

  The Netherlands

  Hey,.

  I checked the Web from Toshiba site and it seems that you need RAID driver for install Windows properly. The driver is required to get recognized hard drives

  It seems that this driver is available for XP and 2000 only because the laptop is old enough, I think that Yes it doesn't support Vista or Windows 7 I think. You can only try the XP driver. If it doesn t work you must use the operating system preinstalled Toshiba were all working properly! :)

• Drive C does not appear in the computer management window.

  Hello

  In the window of the computer storage management > disk management, I have see my drive C. CD - DVD drive and an external DVD drive only is displayed. C drive is not there. When I look under the disk defragmentation, the C drive is.

  What gives?

  Thank you

  Hello

  Use the Diskpart utility and check if it lists the C drive. Thelist volume command will provide information about each volume in the computer.

  a. Click Start and then click Run.
  b. now, type cmd in the text box and press on enter to open the command prompt.
  c in the command prompt, type diskpart.exe press ENTER.
  d. Enter the following command in the utility diskpart and press ENTER:
  the list volume

  Check if drive C appears in the list.

  See this article for more information about the Diskpart utility:
  http://support.Microsoft.com/kb/300415

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I ran the Windows memory diagnostic tool, he keeps repeating and will not be finished, finally Boot Manager Windows appears with the error code: 0xc000000d.

  I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
  Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
  This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!

  Any ideas on how may get a repair disk or fix it otherwise? Thank you very much

  Run Memtest86 +: your computer passes this test?

  Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• iPhone 3GS not recognized as device support for Windows Vista

  Hi - I recently bought an iPhone 3GS and have been able to get iTunes to sync with Outlook, etc. The problem is that I want to transfer photos from iphone to my computer and cannot get my Windows Vista machine to recognize the iphone as a media device connected via USB. If I go into my computer, the device simply is not...

  I made sure that USB drivers Apple is up to date and it is. All the other things I should try?

  Hello Plumperfect,

  Please take a look at this thread http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/84f1f154-ac5e-4369-b430-ccca8319e6da that some users have found it useful. You can also visit the Apple forums, given the number of threads with information on the same subject in http://discussions.apple.com/forum.jspa?forumID=1333.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• card not recognized on Vertiron M4620G running windows 8.1 64 bit

  Hi people,

  have tried to install the new card "soundblaster" and Device Manager doesn't recognize pci - e.

  Have disabled audio controller integrated into the bios, still nothing

  any suggestions?

  problem solved, thank you a lot of time to rock on

• Stereo Headset H150 is not recognized by my computer to Windows 7.

  The stereo headset H150 is Logitech, and connect to my Windows 7 laptop, with plug-ins 2 (caps of sound and microphone) and is warm in. Temporarily, it worked but I needed to clean my computer, so I uninstalled a few things and my careless mistake I think I uninstalled it too. I was wondering for any soltion? Thank you.

  Hello

  -You are able to hear any sound on the speakers to laptop?

  If you are able to hear the sound through the laptop speakers but not headphones then try the following steps.

  Exercise the functions mentioned below to set the headphones as default:
  1. go to Start and click on Control Panel .
  2. click on her, then a new window will open.
  3. in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.
  4. now check if headphone is listed there and right-click on it and choose activate.
  5. Select the headset and click on "as default'.»»

  If you are unable to hear any sound even through the laptop speakers, you can consult this article and check if that helps.

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones.

  Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  No sound in Windows: http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Thank you.