Recovery of factory G60 with broken screen

I have a laptop with a broken screen G60. I used it with an external monitor. I would like to restore to "factory" condition When I run HP recovery, he goes to the built-in screen. Is it possible to get HP recovery to work on an external monitor.   The laptop is running Windows Vista,

Thank you

Fred

Thanks fot help Mumbodog.

I could get the computer provided the factory. Fortunately I had an about four inches of screen on the right side of the built-in screen. I could open the HP Recovery Manager, and then drag the screen where I was able to make the appropriate selections. I have a keyboard and wireless mouse and hung the laptop to a TV flat screen 42 inch.

Thanks again

Fred

Tags: Notebooks

Similar Questions

  • iPhone 6 s factory reset with broken screen

    Hello world

    I recently broke and unfortunately broke the screen of my iPhone. Fortunately, I had insurance through my phone carrier and they sent me a new phone. Before you send it, they had me remove my iPhone the iCloud on find my iPhone. I try to do a factory reset on the phone to clear all my old data/etc through the iCloud. Unfortunately, he told me that he won't delete it until the old iPhone is connected to the internet. Because the screen is broken I can not log on the old iPhone to connect to the wifi in my house as find my iPhone/iCloud can recognize to do the factory reset.

    Is there another way to do a factory delivered to my phone?

    Hi dalekgirl,

    If you need to wipe OUT the data on your iPhone, you can do this by placing the device into recovery mode and restore through iTunes.

    If you are unable to update or restore your iPhone, iPad or iPod touch
    https://support.Apple.com/en-us/HT201263

    Kind regards!

  • Help! Aspire 5735 laptop with broken screen does not recognize external monitor after the factory restore

    I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.

    I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!

    She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.

    Is it possible to access something in the BACK or other so he could recognize the external monitor?  What is finally toast?

    Connect the external monitor to the laptop.

    Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.

  • Can I use my laptop CD drive good install disks of program on another mini laptop (with broken screen)?

    I have a Dell Inspiron Mini running on Windows XP, that I dropped and broke a plastic wedge.  The broken plastic cut a wire to the screen, leaving me with a white screen.  I was able to use the fn 1 toggle to turn on a second monitor via a HDMI cable.  However, I decided that the blank white screen bothers my eyes, I went into the display settings and select 'make this my main screen' which means, do my main screen TV.  However, he turned off the TV screen instead of the empty white laptop screen.  The Fn 1 button no longer works.  I tried to do a manual telephone walkthough with Dell system restore.  By restoring the computer to its factory settings, I should allowed to use the Fn 1 button again to turn on my TV via HDMI cable - without success.  Therefore, Dell confirmed that I had a software internal problem and recommended that I post him for repair (no guarantee).  The Dell Inspiron Mini has no CD Rom internal drive, however, I have the original disks supplied with the notebook software program which is five years (or more).  The Dell Inspiron Mini operating system is Windows XP.

    Now, I have a laptop HP large format, with CD Rom drive, running on Windows 7.   Can I use my HP CD Rom to install the original records of the original Dell Inspiron mini Dell program?  Thank you.

    Thanks for the tips.

    You are welcome. :)

  • [EMERGENCY] How to control iPhone with broken screen of Mac?

    I had a 6 iPhone with iOS 10 installed.

    I had a Apple Watch series 1 with watch 3 installed OS.

    iPhone fell in the water.

    Shut down the screen.

    Using the 'Ping iPhone' feature of Apple Watch (see image below) does the ping of the iPhone.

    Otherwise I have no information of the State of the iPhone. It seems somehow to be living any.

    Is there a way to interact with the iPhone to my Mac to dissociate the Apple Watch of the iPhone and backup iPhone?

    iPhone is not jailbroken.

    I appreciate guidance and recommendations for tools!

    Thank you very much!

    Sorry no. Make an appointment at the genius bar. Your phone will need to be replaced.

  • How to unlock the phone with broken screen?

    The screen on my Keon is broken. Fortunately, it still meets the touch. Just in case, I wonder:

    How would unlock my Firefox OS phone if it no longer meets the touch?

    I'm running 1.3 on my Keon, and my flame (always good screen!), it's the 3.0 nightly.

    On Android, you can connect a mouse: https://www.youtube.com/watch?v=TTW0yfol_kQ

    Hi Fekle,

    Unfortunately, it is not possible to connect a mouse to Firefox OS. You can write to our advocacy team to suggest new features and provide feedback on your use of Firefox OS:

    I also already asked B2G teams if it is possible to recover a phone without the password. The answer short, is that for security reasons, it is not possible.

    I hope you find this information useful. Please let us know if you have other questions about your Firefox OS device.

    -Ralph

  • BlackBerry Smartphones Priv with no come WIFI and bluetooth unrepaired back with broken screen repair center


    Thank you very much for your efforts. Before a minute, an employee of Blackberry called me and said they will repair the phone.

  • Slate 7 broken screen

    I have HP Slate 7 Tablet with broken screen and I need to know the center of local service in Egypt or the Middle East

    Thank you

    Hello
    There should be contact information in the documentation provided with your device. If you need to find it online, you can find the docs here: http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lang = to & lc = in & product = 5376605 &

    Simply change the language of your local language.

  • Replace a Macbook with a notice of need broken screen

    My hard drive went out on my early 2011 Macbook Pro with a broken screen. The broken screen this weekend, I've not had the chance to put in place for repair. Before the hard drive went out I used it Clamshack mode I know that it does not in recovery mode, but how bad of an idea do you think it would be to replace the hard drive and install Mac OS X blindly? Or do you think I should buy a tablet in Windows of 100 dollar budget to use temporary while that I set up for the fixed screen?

    I can't speak for your calendar or your budget, but... I asked when my MBP 2011 will no longer support the Genius Bar (products Apple will "legacy / obsolete ' possibly) the deadline is the end of this year early next year.   Don't wait too long to save for repair in my opinion.

  • c110nr stream 13: need to recovery option (broken screen)

    My laptop battery died in the middle of a factory restore. I had used as a desktop computer the screen is broken. Now, the HDMI port does nothing. It's a problem because it was what I plugged the laptop on my moniter with. all that happens when I turn on the laptop is the screen backlight lights up.

    I found the solution to my problem. I just had to remove the broken screen, then the laptop showed on the screen of the bios on my monitor. I succussfully installed ubuntu 16.04, and it works perfectly. Thanks anyway, if.

  • I have a frozen screen of Active recovery of white desk with a mouse. I think that the computer is frozen upward with a problem of recovery? Right?

    I have a frozen screen of Active recovery of white desk with a mouse.  I think that the computer is frozen upward with a problem of recovery? Right?

    How can I fix?

    Hello
    • What were the changes made before the problem occurred?

    You can try to restart the computer and check if it helps.

    If above does not help, you can read the following steps to disable the active desktop on the computer and check:

    a. to disable Active Desktop.
    b. right click on an area empty office, point to Active Desktop, and then click view as Web Page to clear the check box.
  • Recovery of original factory system with windows 7

    Hello

    How can I get the recovery of original factory system with windows 7? I have the origanal my system wihsed.

    Nice welcomes,

    Jos Franzolet

    Hello

    You can usually order a replacement set of recovery discs from the link below.

    Order HP recovery disks.

    If you have a problem with this link, order them directly from HP.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

  • Broken screen on iPad mini 4

    Hello!

    I bought a mini iPad 4 LTE 64 GB November 2015 in Prague.

    I live in Ukraine starting in 2016.

    I broke the screen on the iPad, but it still worked. So in the service centre they told me it's ok just to change the screen with touch screen, but it doesn't have these spare parts without display. With the display, it cost more than $ 200, which is very expensive. I sent the iPad in Czech to try to fix here, but they have the same problem there is no authentic spare without display.

    In Ukraine, I tried up to 20 companies.

    It is not a problem to change the screen with touch screen for mini iPad 1, 2, 3. But it is a huge problem for iPad mini 4.

    I use my iPad for work, now I am without him for 2 months. And now my iPad goes to Germany to try to fix it.

    The similar problem with iPod touch 5G, I didn't want a lot of services still, but the popular answer «we are unable to change the screen, we can change iPod»

    It's very frustrating. I had 2 iPads, 2 iPods and they were all with broken at the end screens.

    And it's very expensive to change a screen, the minimum is 30% of the price of the device.

    What is your suggestion?

    PS: the service of mini 4 iPad *.

    The screen part display, glued together during Assembly at the factory of display manufacturers.  There is no glass screen for iDevice display, or in any case for re - bind another to a view even if such a glass screen existence (which he did not).

    The only way to fix these integrated displays is to replace the entire factory mounted display unit.  There is no other suggestion - if you break the screen on an iPhone or an iPad, you need to replace the whole screen unit, because they are manufactured as a single integrated device, and OEM replacements are no longer available to Apple or their suppliers of repair accredited as a single integrated replacement unit.

  • HP Pavilion dv4: can I factory reset with an external monitor attached to my laptop?

    I got a laptop HP Pavilion dv4 entertainment PC. It has a cracked screen and I use an external monitor attached. Can I do a factory reset with the attached external monitor? The monitor is an HP w1815 LCD, case ini that matters.

    Thanks for any help on this.

    I would like to add that I can see on both screens only on screen cracked that I can't see the bottom of it due to cracking. As recovery options are visible on the external display, it would be prudent to start the recovery process? I made a few choice, but I am now at the point choose to 'pull the trigger' and click next to start it or hit Cancel.

    Thank you.

    Hi @Auntboris,

    Welcome to the HP Forums!

    It's a great place to find answers and advice!

    You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

    Learn how to post and much more.

    I take that you acquired an HP Pavilion DV4 laptop and want to know if you can do a factory reset with an external monitor because of the cracked screen.

    Yes, you can always make a recovery.  Here is a link to HP Notebook PC - perform a recovery of the system (Windows Vista) HP

    Here is a link to HP laptops - how to restore backup files created during the backup procedure F11 to help restore your files if you selected this option.

    Please keep me updated.

    Good luck!

    Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

    To show recognition for my efforts, please click on the ""Thumbs Up Icon " below."

  • Acer Aspire R7 - 572 stuck with white screen

    My windows was stuck and I pressed the power button / stop with force. After that turned it back on it was blocked on the acer boot logo I pressed ctrl + alt + delete. It was not the passage of acer logo. Finally, he showed the automatic recovery of windows on the start screen. Since then his black screen stuck on its been nearly two hours. Nothing has worked.
    Help, please.

    Nene,

    I regret that the computer does not load Windows. I would recommend using recovery media to restore the system to factory settings. If you don't have a recovery media, this can be bought through the store.acer.com or by phone with technical support.

    If the recovery media is not available, you can always contact our technical support in your region for assistance. The question might also be related to the HARD drive and would need assistance.

Maybe you are looking for

  • Satellite Pro A100 - I need some drivers

    Hello ladies and gentlemen, I would appreciate any help that you can offer to the prediciment I'm in that: I tried a reinstall on my Toshiba satellite pro A100 model girlfriend. PSAAPE-00H00KEN. The problem is I ve come across are the controller Ethe

  • Router Netgear R7000 - incorrect SMTP address

    Hello It is the engine of my crazy. I spent several hours Googling and trying to figure out why my router Netgear $ 219 R7000 does not allow my enter my smtp address of the ISP. He always tells me "Invalid SMTP address" when I try to setup for mail l

  • Validation of Vista Home Premium

    I am UNABLE to ENTER my Vista Home Premium thus having power outages frequent and unable to upgrade entirely. Well I have had done several here with VALID according to the booklet numbers provided by who I got the OS installed but now have less than

  • E7240/E7440 driver to MDT

    I can't get these two machines to begin the deployment share because missing device drivers: PCI\VEN_8086 & dev_155a & subsys_05ca1028 & rev_04 All the research I've done the point on the nic card: Intel I218-LM However I installed all the drivers an

  • Default gateway will not save on any network adapter

    Recently, I built a brand new computer and installed Windows 7 above for someone else to use at our company. Everything was fine until today, when all of a sudden there is no network connectivity more. I had the adapter built into the motherboard and